Activate extension PLM and SCM

Hi All
For Business package for Maintenance Supervisor ./Technical/Planner ,i need to activate the extension for PLM and SCM.
Can anyone let me know how can i do that?
We are on ERP 6.0 EHP3 with xRPM installed as add-on.
Moreover if anyone of you have configured BP for Maintenance for Supervisor /Planner/Technician ,it has another requirement of BI 7.0 Add-on.
Do i understand correctly that i will have to install BI as add-on on the ERP system??
Regards
Ajay

Hi Ajay,
You can use SFW5, SFW4 and SFW3 here you can activate the PLM extenstions.
Regards
Chandra

Similar Messages

PLM and Environment Health & safety

My cutsomer is upgrading to SAP ERP 6.0 and they want to know if PLM must also be implemented in order to deploy any environment health and safety capabilities?
Thanks you

Hi Lois,
EH&S is part of the PLM Extension.
The software component is EA-APPL (SAP Enterprise Extension PLM, SCM, Financials).
That means that EH&S is not independent from the PLM extension.
In SAP configuration you should activate the PLM extension in order to use EH&S. Some parts of EH&S (ECM objects, SAP Menu entries, ...) will be in place when activating the PLM extension.
Best regards,
Andreas

Important Updates for Illustrator, Extension Manager, and Photoshop - Failure to Install

I have been trying to update my Illsutrator, Extension Manager, and Photoshop.
I have tried about five time using different methods.
Each time I received the following error message:
AI CS6 Creative Cloud Update
Installation failed. Error Code: U44M1P7
Adobe Extension Manager CS6
Update Installation failed. Error Code: U44M1P7
Adobe Photoshop 13.0.1.1
Installation failed. Error Code: U44M1P7
I need some giudance in order to have the updates installed.
Thanks
Paul

Whilst this may prove to be the only way to install the updates, it reads as though it only takes a few minutes to complete but as others have reported it's a real pain to have to go all through a clean up and then full installation particularly if you have a number of plugins to re-install / activate! Not the best solution and I would have hoped Adobe could have come up with a better solution. As it is I will not be going through the update and will set the application manager to manual rather than have the icon constantly on displayed in the taskbar expecting to update what doesn't work.

Activate Document Browser and ACLs

Hi all,
I want to activate the Document Browser and ACLs tab in the DIR.
I have followed CAC--> Document Management --> Control Data --> Activate Document Browser and ACLs and then I've maintained "X" for each tab, but in the DIR nothing appear.
Have you any suggestions?
Thanks,
Marco.

Hi,
In this activity, you can activate the document browser and ACLs independently of one another.
When you select the indicators, the tab pages Document Browser and Authorizations are available in document editing.
The document browser contains the folder structure of SAP Easy Document Management, which you can use to edit documents. For more information about the document browser, see SAP Library under SAP ERP Central Component -> Cross-Application Components -> Document Management -> Document Browser.
You use ACLs to pass on access rights that you created for a particular folder to other folders in the same structure. For more information about ACLs, see SAP Library under SAP ERP Central Component -> Cross-Application Components -> SAP Easy Document Management -> Work with SAP Easy Document Management -> Authorizations in SAP Easy Document Management
Also check ,
As of SAP ERP 2005, all ACLs are automatically available in SAP Easy Document Management and the back-end system. As of SAP R/3 4.7, it is possible to implement ACLs and you have to implement ACLs up to SAP ERP 2005 (see SAP Note 798504).
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7c/4ca9429888b111e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/scn/wiki?path=/display/plm/newFunctionalitiesinERP2005
Benakaraja ES
Edited by: benaka rajes on Jun 11, 2009 10:48 AM

Activated SAP ECC Enterprise Extension PLM.

Dear Expert,
From where i can activate SAP ECC Enterprise Extension PLM. my problem is i am unable to see document browser tab while editing documet. i have already activated document browser flag (Tcode DCSWITCH).
Bhuwan
Edited by: tbhuwan.kaar on May 9, 2009 3:15 PM

Done by Basis People.

Integration (JDeveloper 10G and SCM 9i)

I am new working with JDeveloper and SCM.
Is it possible to integrate JDeveloper 10G to SCM 9i, or should I use the same version for both products, in order to reduce future problems?
Now I am having some problems, for example:
1) I can not move a business component from a package to another. Both packages are checked out. The BC4J is checked out, too.
2) When I try to add a new JSP to the struts file from the graphic view, I have to check out both files the strust,xml and StrutsPageFlow.oxd_struts.
3) When I delete a file it is not deleted in the repository.
Are these problems related to the version, or should I install something else?
Thanks for your help.
I am including this question in the SCM forum, too

AFAIK support for Oracle SCM is not yet implemented in JDeveloper 10g. Oracle promises to publish it on Extension Exchange (http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/index.html) as soon as it will be available. I don't expect it released anytime soon :-(
Last version of JDeveloper in which I saw that working was 9.0.3.3. Since then it's been worse and worse.
Regards Jan

How to add extension fields and mashups to partner solution?

To add extension fields and mashups I have log on to the system using a user with adaptation rights.
There's no possibility to do that from within the UI designer, right?
Now, if I adapt the screens with extension fields or by creating and adding mashups, how do I add these enhancements to my partner solution?
Or in other words, how do I ship extension fields and mashups with my partner solution?

Before you use the key user tools, you must "enable key user tools" in copernicus by right click on the solution. Now the changes will be added to the partner soltution transport order.
But you can add extension field in copernicus as well by adding new item "business object extension" to the partner solution.

I can't activate my iPad and I'm sure i am using the correct apple id and password but when i press net it says it cannot be used to unlock this iPad

i can't activate my iPad and I'm sure i am using the correct apple id and password but when i press net it says it cannot be used to unlock this

You can try to figure out which Apple ID/email address and/or password you used to activate it by going to http://iforgot.apple.com
If you can't, you'll need to contact Apple Account Security with your proof of purchase.

I deleted my extensions manager and now my Mac won't start up. Please Help!!

I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
Please help.
Thanks in advance.

Well done! You've succeeded in turning your Mac into a useless brick.
Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
And all to get rid of what sounds like the MacDefender trojan or a variant.
ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
And I doubt your warranty with Best Buy is going to cover user "error."
Message was edited by: noondaywitch

TS2755 Hi, I have been unable to activate my message and FaceTime. Each time I try, I get an error message saying my username or password is incorrect. But that is the same apple id I use in the App Store, and for my iCloud. What could be wrong?

Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

TS4268 I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off but my acc. is being charged.what to do?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

How can i hide extension .mp3 and others

i want to hide extension .mp3 and other extensions . Can you help me?

Hi djandyes,
Globally showing and hiding file extensions is set by a Finder Preference.
Show or hide filename extensions - Mac Help
For all files
If you select “Show all filename extensions,” all extensions are shown, even for files that have “Hide extension” selected. If you deselect “Show all filename extensions,” then file extensions are shown or hidden based on their individual “Hide extension” settings.
Choose Finder > Preferences, then click Advanced.
Select or deselect “Show all filename extensions.”
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

How do I activate acrobat 8 and adobe software on windows XP while not connected to internet? [was: Windows XP.]

Please help me.
How do I activate acrobat 8 and adobe software on windows XP? While windows XP can not connect to internet.

Hi Tom,
We would like to inform you that Acrobat 8 is now end of life, we have limited recourses for it.
Kindly check the System requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC
Please check the following links if any of them works for you.
Acrobat 8 activation problem
Adobe - Adobe software activation: Phone activation
Offline Activation
Thanks,
Atul Saini

I recently inherited a restored iPhone 5 from my uncle and its needs a sim to be activated, could i use my friends sim just to activate my iPhone and then give the sim back once its activated without affecting his contract and later on get a sim ?

I recently inherited a restored iPhone 5 from my uncle and its needs a sim to be activated, could i use my friends sim just to activate my iPhone and then give the sim back once its activated without affecting his contract and later on get a sim for myself and a contract for me and it all be normal??? Thanks

The phone MUST have a SIM present in order for activation to complete. The process will not finish otherwise.
For the OP:
If the iPhone 5 is locked to a carrier, you must use a SIM from that same carrier. Otherwise I think you would be OK borrowing the SIM to activate the phone.
~Lyssa

I have a problem in activate Alaaclaud account and I can not open the device

السلام عليكمI have a problem in activate Alaaclaud account and I can not open the device

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

Activate extension PLM and SCM

Similar Messages

Maybe you are looking for