Activate Further Information Flexfield

Hi there,
I cant select any values in the field Further Information in the Payroll Element Description screen.
Where can I activate this field? Is this a Profile option what I have to activate or is there a setting/data missing in the Business Group component.
PLEASE help me... I cant now make any Regular Salary element.

Hi,
what is the legislation of the business group you want to configure payroll for?
If it is US, UK, NL, or any other legislation for which exists a payroll localisation, this looks like an install issue (hrglobal?).
When it is a legislation for which does NOT exists a payroll localisation, you have to do a lot of things yourself.
When this is blocking you, you can send an email to thierry at popay.be
Good luck,
thierry

Similar Messages

  • Safari 7.0 (v9537.71) has not been tested with the plugin LastPass 1.75.0 (v1.75.0). As a precaution, it has not been loaded. Please contact the plugin developer for further information.

    I get the following message whenstarting Safari
    Safari 7.0 (v9537.71) has not been tested with the plugin LastPass 1.75.0 (v1.75.0). As a precaution, it has not been loaded. Please contact the plugin developer for further information.
    i have removed the plugin, but the message is still around
    and the last version i had installed was the most recent version of last pass VERSION 3.0.17
    anything i can do to fix that?
    thanx
    js

    Uninstall SIMBL as follows. Back up all data before making any changes.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    /Library
    In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.
    Application Support/SIMBL
    InputManagers/SIMBL
    LaunchAgents/net.culater.SIMBL.Agent.plist
    ScriptingAdditions/SIMBL.osax
    Log out and log back in.
    Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

  • Crystal Reports prompt issue on export: "The report you requested requires further information"

    I have searched through forums for a solution but none seem to work for me.
    I have an ASP Webform/MySql application which displays Crystal Reports.
    The ones which do not require a user to enter a parameter display fine and I am able to click on export on the CR toolbar and download, e.g. .pdf format.
    On the report that require a user to enter a parameter, the report renders fine but when I click on the export button, i get the prompt:
    "The report you requested requires further information"
    asking for DB login credentials. How can I avoid this?
    My Code:
    Aspx page:
    <%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
    <div>
              <CR:CrystalReportViewer Width="960px" ID="CrystalReportViewer1" runat="server" AutoDataBind="true" />
    </div>
    protected void Page_Load(object sender, EventArgs e)
             if (Request.QueryString["report"] != null)
                    string reportToGet = Convert.ToString(Request.QueryString["report"]);
                    switch (reportToGet)
                            case "payslip":
                            PaySlip();
                            break;
                            case "pastpayslip":
                            PanelPastPaySlip.Visible = true;
                            break;  
                           default:
                           break;
    protected void btnSearch_Click(object sender, EventArgs e)
          if (txtDate.Text != null || txtDate.Text != string.Empty)
          if (DateTime.TryParseExact(txtDate.Text, "yyyy-MM-dd", CultureInfo.InvariantCulture,
          DateTimeStyles.None, out date))
          PastPaySlip();
    private void PastPaySlip()
                // Some code....
                PayMasterDataSetTableAdapters.pastpayslipcasualviewTableAdapter ta =
                    new PayMasterDataSetTableAdapters.pastpayslipcasualviewTableAdapter();
                PayMasterDataSet.pastpayslipcasualviewDataTable dt = new PayMasterDataSet.pastpayslipcasualviewDataTable();
                ta.FillBy(dt, userId, businessId);
                cReport = new ReportDocument();
                string reportPath = Server.MapPath("~/Views/CasualLabour/Reports/PastPaySlip.rpt");
                cReport.Load(reportPath);
                cReport.SetDataSource((DataTable)dt);
                cReport.SetParameterValue("Date", date);
                cReport.SetDatabaseLogon("userID", "password", "server", "database");
                CrystalReportViewer1.ReportSource = cReport;
                CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
    I am using CR V. 13.0.9 and VS 2013 Update 2

    This is because almost any action on the viewer result sin a postback. This includes paging, zooming, drilling exporting and printing. E.g.; you will have to place the report in session. See the following KB for how to:
    1985571 - How to use sessions in web applications using the Crystal Reports viewer (the complete code)
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • An error has occurred. Further information is available in the server log.

    I been trying for days to access Secondlife.com but when i do i get this message''An error has occurred. Further information is available in the server log. '' now i can use Chorme and firefox to go to the site but not firefox plus fireofx is searching for second life on my C drive and Customer service for second life said they don't know why Firefox is Searching for Second life on my c-drive.. Can you please help me
    Thank you very much

    You can try these steps in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • To activate Sales information system for new sales area

    Hello Gurus,
    Please inform how to activated SIS for newly created sales organization i have done the following configurations:
    header level: (t-code: OVRP)
    Sales Org: say,1234
    DstCh:
    Division:
    Customer Statistic Group: +
    Statistics group for sales document type: 1
    and
    Sales Org: 
    DstCh: 
    Division:
    Customer Statistic Group: +
    Statistics group for sales document type: 2
    Item Level: (t-code: OVRO)
    Sales Org: say,1234
    DstCh:
    Division:
    Customer Statistic Group: +
    Statistics group for sales document type: 1
    and
    Sales Org: 
    DstCh: 
    Division:
    Customer Statistic Group: +
    Statistics group for sales document type: 2
    After doing the configuartion i have craeted some documents but still if i go to t-code: MCTA to view the report i dont see any information.
    Kindly inform if i am missing on anything
    Thanks in advance

    Hie,
           I think that the system does it, there is no particular transaction to activate the SIS. And if you have created the documents then it should reflect in SIS. I hope that you have created the documents till billing i.e. till the accounting document is generated.
    If you can say something more bout wht you are facing may be the thread will help you.
    Regards
    Denish

  • HT1918 My name is Paul Augsburger I have had several issues with my account and they are now fixed with one exception,  I have two Apple ID accounts, and I would like to combine them. Please contact me at pra1949 (at) me (dot) com for further information.

    Please contact me at pra1949 (at) me (dot) com for any further contact I don not monitor the suelefriends (at) gmail (dot) com email.
    I have had several iisues with my Apple ID accounts and spent many hours at the APPLE store in Richmond Va. getting them fixed. The technician was wonderful, patient and very knowlegeable, however he was not able to complete the task and said I needed to contact Apple support for the final step. During the process of fixing things I ended up with two APPLE ID accounts. my main accout is suelefriends (at) gmail (dot) com and the second account is "pra1949 (at) me (dot) com" I have most of my apps tied to the main account with only a few to the pra1949 account. I also have $25 worth of credit on the pra1949 account. Because of the two accounts it still makes updating apps very confusing and very cumbersome. I would like to have the two accounts merged so I end up with one account with all the money and APPS tied to it, that way I only need one password to update. I hope this is possible.
    Paul Augsburger
    <E-mails Edited by Host>

    These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
    In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another.

  • Disk Utility shows Disk1, not mounted, and no further information???

    Disk Utility shows my correct disk partitions in the top section (my hard disk with two partitions and my superdrive). In the lower section, however, there is a "disk1" which shows no information. Under that is another "disk1" which shows only 'Not mounted' for 'Mount Point:' and '0 Bytes' for 'Capacity'. All other lines only show dashes.
    I looked at my /Volumes folder in Terminal. It shows four entries:
    x MPBWinXP - which is my boot camp partition
    x MacBook Pro HD - which is my OS X partition
    x MacBackups-1 - which is an external drive on my network (for my Time Machine backups)
    x administrator's Public Folder - hunh?
    So, this "disk1" in my Disk Utility must represent one of the last two, I'm thinking. And, I'm thinking the last one isn't supposed to be there - or is it there because I shared it at some point, maybe?
    Any thoughts on this and what I might do to get rid of the "disk1" from my Disk Utility display?

    I never received a reply to this, so I'm marking it as 'answered' just to close it out.

  • How to display further information when a drop down menu option has been selected.

    Hi all,
    Thank you in advance for any replies!
    I'm building a website which has a drop down menu (HTML for the menu is below). When a TV size is selected i need the pricing information for that specific TV size to appear below the menu.
    Is there a way to do this?
    Thank you!
    <select name="Please select your TV Size" size="1">
            <option> </option>
            <option>Less than 42&quot;</option>
            <option>More Than 42&quot;</option>
          </select>

    Sure it is. And Nancy has given you a good alternative as well.
          <p>TV1 <input id="num1" type="radio" checked value="tv1" onclick="document.getElementById('tv1').style.display='block';document.getElementById('tv 2').style.display='none';this.checked=true;document.getElementById('num2').checked=false;" ></p>
          <p>TV2 <input id="num2" type="radio" value="tv2" onclick="document.getElementById('tv2').style.display='block';document.getElementById('tv 1').style.display='none';this.checked=true;document.getElementById('num1').checked=false;" ></p>
    <div id="tv1">Info for TV1</div>
    <div id="tv2">Info for TV2</div>
    With this CSS -
    <style type="text/css">
    #tv1 { display:block; }
    #tv2 { display:none; }
    </style>
    Should work.

  • SCN Content Submission: Is there any further information on the submission status?

    Hi colleagues,
    I understand and have read a couple of times that I can contribute content via the content submission (SAML Response from SAP ID Service).
    and I see the status "Submitted" for my document.
    The question is, is there a way to get more information about the current status of the submitted document? Or is the only information I get the mail "don't call us, we'll call you" , i.e. the automatically generated mail telling me that I'll be informed once the content is published and and that I'll receive a link to the published document?
    Cheers,
      Jasmin

    Hi Jasmin,
    You can contact the content team directly at [email protected] to determine the status of your submission.
    fyi - After it has been published, you will receive an automatic eMail with the URL.
    Jason

  • My iohone5 signals incoming call. Then, immediately Blocked Call is displayed! With no further information re caller.  I have just switched from iPhone 4 and never had experience with Blocked Call! Message . How can I at least find out who or what blocked

    MY iPhone 5 keeps blocking incoming phone calls with a message "call blocked" there is no addition information on who/what is being blocked or why. I have just transitioned from iPhone 4 to 5 and never had this happen before.  Does anyone else have this problem? How does one find out what/who is being blocked?

    If a user has blocked their caller ID there's nothing you can do but either answer the call or don't.
    This is NOT a problem, this is how blocked calling works.

  • SCCM 2007 console client=no,Approved= Approved,there is further information

    Hi Team,
    We are having parent and child Domain. Consider ABC is Parent where SCCM Installed and XYZ is the Child Domain.
    Machines in the Child dmain are not publishing AD information to the parent Domain.
    Client : Automatic Discovery was unsuccessful. Also, in the console under Client = NO.
    Kindly let us know the solution.
    \Arjun Kandasamy

    Hi Jason,
    Location services Log: LSGetVersionFRomAD : failed to retrieve version of the site 'XYZ' (0x80004005)
    we have check the firewall, and current settings provided below,
    From SCCM serverto client on 3268/TCP is allowed in the firewall.
    From Client to SCCM server on port 3268 /TCP is not allowed in the firewall.
    Kindly let me know, why the clients in the child domain not publishing AD Information.
    \Arjun Kandasamy

  • AppBuilder: Need for further information

    Hi, I have a few questions on AppBuilder:
    What is the position of App Builder on SAP's mobile application development. Is it only for POC, for prototyping or can we use it to develop application that can be deployed on production?
    Can we use App Builder to start up a project then migrate to Eclipse for further development and customization using SAPUI5?
    Are there any limitations for App Builder?
    Is it still better to develop application using SAPUI5 or better to develop them on App Builder?
    Thanks in advance.

    I am a computer user just like you. Over the years, I have learned about a few tools you can use to get a better idea of what is happening with processes within your computer.
    In Windows 10, you have the Task Manager  - right click Start Menu, you will find it easily in there.
    You have Computer Management in there you can look at too.
    In the Control Panel, you have Administrative Tools which contains some of the stuff listed above plus a lot more other stuff to look at.
    A word of caution, you can change how some components work on your computer through these tools, so don't go messing about unless you are really sure of what you are doing.
    On the web , you can find tools you can use as well. One of my favorite is Process Explorer which can be found at
    www.sysinternals.com. If you watch what is posted on these forums, you will find other tools you can use from time to time.

  • Constantly getting Download Error in Creative Cloud Manager, Apps tab. No further information, simply states "Contact customer support"

    Photoshop, Illustrator and Flash have all been successfully installed on this computer via Creative Cloud. Recently, the below screen keeps appearing when attempting to access the Apps tab.
    Please advise.

    This worked:
    Try to delete AAMupdater folder from
             ~/Library/Application Support/Adobe/
    From this post:
    https://forums.adobe.com/thread/1245532
    Thank you for your assistance!

  • The report you requested requires further information. Database Login.

    I have developed a simple report (crystal XI) and deployed to Crystal server.  When viewing the report, the user is asked to login to database with ID/password.  The report works well in dev environment.  The report is not called programmatically via VB, C#, ASP, ... therefore I cannot set ID/password in source code. 
    I am looking for a dialog screen within dev environment that allows me to force the report to keep the ID/password with it and use it to connect to DB at runtime.

    >
    Navin Raja wrote:
    > Hey,
    >
    > The report prompts for Database login if the report is created with dynamic parameters in crystal reports designer and deployed to crystal server.
    >
    > Logon to Central managenent Console (CMC) using the Administration Launchpad.
    > Open the report just saved in Crystal Reports Server.
    > Click Process tab of the report.
    > Click Database tab under Process tab.
    > Enter the Oracle database Server's username in the textbox for "Username".
    > This username should Previleges to access or administrative previleges to make changes in CMC.
    > Enter the password for the "Password" textbox.
    > Click "Use same database logon as when report is run" under "When viewing report:".
    > Click the "Update" button.
    > Click "Properties".
    > Click "Preview".
    >
    >
    > Let me know if it still prompts for the password.
    >
    >
    > Thanks,
    > Naveen.
    Is there a way to set this for multiple reports at a time?

  • Further information about bug #4503177 available?

    Hi,
    my plattform is:
    SunOS 5.8 Generic_108528-11 sun4u sparc SUNW,Ultra-60
    the compiler is:
    CC: Sun WorkShop 6 update 1 C++ 5.2 2000/09/11
    I've encountered problems with exception-handling (not reliable reproducable).
    My application stops with signal 10 when throwing a derived exception and trying to catch the base-class.
    I've read about a bug in: "Patch README for 111685-12":
    4503177 derived exception classes not working properly
    - but this patch is for WS6U2.
    Qestions:
    Q1: What is the exact problem of bug #4503177? - I'd like to find out if this bug has anything todo with my problem!
    Q2: Is there a Bug like #4503177 in WS6U1 to?
    Q3: Is there a Patch for WS6U1 available?
    Thank you very much - bye H. B.

    You can download the free Update 2 (6U2), and then get
    the latest patches for that, which will fix the bug.It turned out, that my problem seems to have no relation with bug #4503177 - but i will update the compiler anyway - do i need to update the machines which are runnig the application beside the one i'm developing with also?
    bye - H.B.

Maybe you are looking for