Activate industry extension campus management

Hi,
I activated Campus Management as wrote in 874414 note. I  could use campus management transactions, but i can't to reach Campus management in the SAP application menu.
Support package level
SAP BASIS 14
SAP ABA 14
all packages in system are up-to_date. I think that bug is on last SAP packages, because i early installed Campus Management ides and i could see Campus management in the SAP application menu and in my DEV system i activated all like in Campus managemt Ides. Maybe anybody had or  saw this problem ?

What version of ERP are you running?
Michael

Similar Messages

  • How to create the custom infotypes in Campus Management

    Hi,
    Please help me how to create the custom infotypes in campus management.
    Thanks,
    Lakshmi.

    Hi,
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Cheers,
    vasavi.
    kindly reward if helpful.

  • If we don't use SAP campus management

    Dear experts,
    We want to implement ECC and CRM in the Higher Education Industry. Our client has already a Student Management System (not SAP) and doesn't want to change it now.
    We want to use SAP for billing, instalment plans and debt management (- btw, not only for that). Which SAP modules should we use for that and which object should we configure if we don't use Campus Management? 
    Could we create a business agreement /contract in CRM with students courses as products? Or could we use service order?
    Thanks in advance for your feedback,
    Best regards
    Stephanie

    Stephanie,
    You could certainly do a standalone SAP student accounting implementation which interfaces with the legacy student system.  This approach has actually been done before at other insitutitions, including those that choose to implement Student Accounting prior to implementing the rest of Student Lifecycle Management.
    Student Accounting would handle all of the billing, collections, payments, installment plans, etc.  It is based on FI-CA (Contract Accounting).  The biggest question is whether tuition fees would be calculated in SAP or in the existing system.
    I would not see CRM as a necessary component at all for student accounting, but you might have other uses for it (such as recruitment).
    Michael

  • Activating Business set function for Campus management

    Hello All,
    I am trying to activate the business set function for Campus management but ending up in error
    Invalid Status
    Business function FICAX is not in target business function set
    We are in Ehp4 and its IDES system. Do i miss any settings / configurations
    Regards,
    Anand

    Hello Tina,
    Kindly regret for delay in reply and I have sent you the mail.
    Regards,
    Anand

  • Problem With Device Management in Campus Manager

    hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
    then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
    why does it hapened ?   
    thank you .

    Hi Marian,
    Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
    Content Activation Log
    Log for Setup ID 20100819135323
    20100819 135323[ERROR ]: Current Status: ERROR
    20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
    20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
    20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
    20100819 135323[ERROR ]: Prerequisites check failed
    20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
    I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
    Regards,
    Rue.

  • Data Collection in Campus Manager hung

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    I am running LMS 3.2 and Campus Manager 5.2.1.  My data collection in Campus  Manger for my devices does not complete and runs indefinitely.  It has been hung in the "running" state for the past week and will not complete.  I only way I found to get it out of the "running" state is to reset the ANIServer service and reboot the server.  I have had this problem since I have upgraded to LMS 3.2.  Does anyone have any input of this issue or possible solutions? 

    The data collection hung again as expected over the weekend.  The ANI.log file grew to 1.8 GB again.  It is to large for me to open it.  I could try to split it up into smaller files.  What should be my next course of action?

  • AniServer Campus Manager problem

    Hi I recently ran a Device patch update and ever since I have had major problems with Campus Manager.
    I figured it was Aniserver related So i have done the following so far:
    1- I reinitialised the ANI Database
    2 - I replaced the aniserv.properties with the .orig file.
    Still the problems exist even if i managed to get the Aniserver started campus manager data collection would have problems and intermittent error messages when trying to access Campus Manager admin pages.
    3 - I decided to upgrade to LMS3.2 SP1
         It seemed to be ok with data collection but then when I came in to work today it hadnt run any scheduled aquistions when i went tinto the admin pages I had the error messages again unable to get properties from server.
    4 I decided to try a complete restore of the database to a date before the initial device package update.
    But I still have problems with the aniserver Failed to run.
    Please Help!!
    Kind regards Dean
    Here is the Ani log
    2011/06/23 13:11:10 main ani ERROR ServiceModule: Failed to instantiate com.cisco.nm.ani.server.dfmpoller.NoServiceModule
    2011/06/23 13:11:10 main ani MESSAGE DBConnection: Created new Database connection [hashCode = 6164599]
    2011/06/23 13:11:12 main ani MESSAGE PartialSMFCommit: Partial Commit is enabled for DataCollection
    2011/06/23 13:11:16 main ani ERROR POStore: Exception caught: com.cisco.nm.ani.server.frontend.AniStaticConfigException: AniStaticConfigException: Failed (sql) to verify/construct schema for PO com.cisco.nm.ani.server.topo.PagpPortChannel because: com.sybase.jdbc2.jdbc.SybSQLException: SQL Anywhere Error -116: Table must be empty
    2011/06/23 13:11:16 main ani ERROR AniLoadConfiguration: AniStaticConfigException: Failed to construct or verify database

    Seems to be working fine now I used the info in the following link to reinitialise the ani.db  https://supportforums.cisco.com/thread/2083513
    Using this alone did not fix it opt/CSCOpx/bin/perl /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI
    But doing this as well seemed to sort it:
    First, set the CiscoWorks Daemon Manager service to Manual, and reboot the server.  When the server reboots, delete NMSROOT\databases\ani\ani.log if it exists.  Then run:
    NMSROOT\objects\db\win32\dbsrv9 -f NMSROOT\databases\ani\ani.db
    After that, set the Daemon Manager service back to Automatic, and reboot again
    Regards Dean

  • Campus Manager report - Ports in error Disabled state

    Hi,
    I have LMS 3.2 and I wonder how Campus Manager collects information from the switch to generate a report of discrepancies, namely a report of "Ports in Error Disabled state"??
    I find that I have ports in errDisabled state but Campus Manger doesn´t show this information in "Ports in Error Dissabled state" report. What could be the problem?
    Thanks.

    Hi,
    Campus Manager do snmpwalk on the ciscoErrDisableMIB to get the status of the error disabled ports.
    Thanks,
    Gaganjeet Singh

  • Campus manager user tracking problem

    Hi We are using LMS 3.0.1 and the campus manager verson is 5.0.2. We have two subnet which are used for the management ip of switch kept in two different geographical areas. I have made the entry of all devices kept in both subnets and all the devices are know device in DCR, RME and DFM. also after data collection the devices are shown in campus manager database. But I am not able to learn the end host details of the hosts connected to one of our segment.
    even if the perticular subnet is not appearing in "campus user tracking" as well as the devices belongs to the subnet. but I am getting all end host details from the second subnet.
    please help.

    Hi clarke,
    i have updated the cm to the latest but still it did not learn. Later i added the 10.188.7.x ip addresses manually in the discovery settings instead of " *.*.*.* " - ip range. Now i am able to see these devices in topology view > layer 2 veiw as connected devices & not seen in unconnected..
    Now i need to see the hostname, ip address etc details of these segments in UT acquisition window.... Secondly in topology view, the core switch is showing in "?" question mark symbol. This device is WS-C6509-E (sup-bootdisk:s72033-ipbase-mz.122-33.SXH3a.bin). I tried to delete this device from common services and added it again, there i selected "ws-c6509", i did not see the " ws-c6509-E".
    in Cisco site, the serial number of the device is showing as the device "VS-C6509E-S720-10G"
    Can u pls help me on this..
    regards
    rajesh

  • Campus Manager No Data Collected from Network

    Just intergraged CiscoWorks with ACS.  Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
    No Data Collected from Network
    1.Devices are not availiable from DCR or
    2.You have not performed data collection at least once
    When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
    We could see devices fine before the ACS intergration but now, we cannot see any devices.
    Any thoughts?

    The devices (original clients) that I defined are as follows:
    10.0.1.*
    10.0.10.*
    10.0.2.*
    I was able to see these clients.  Deleted the above clients from ACS and added:
    10.0.1-10.*
    So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
    I can still see the original clients only.  The others show up in Devices not configured in ACS report.
    What do I need to do?  What did I miss?

  • Wrong CDP data in Campus Manager

    Hi,
    we have a LMS 3.2 in a Windows server. In Campus Manager, some CDP neighbours are shown as wrong. In some cases they are shown with their IP address instead of their name (they are added in DCR with their name!!) and in other cases, the neighbour is other device different than the real one.
    What is the reason for this behaviour?

    Sounds like either a bug, or bad data in the ani database. I haven't seen any topology problems yet in our 3.2 installations, so it could be something in your topology has messed up the database. Make sure all devices have a unique sysName (i.e. hostname+domain name). If not, then you can get similar behavior to what you are describing.

  • Campus Manager Data Collection always Idle

    Hello,
    Every time I  start Campus Manager Data Collection, I get a window "Notified server to run Campus Data Collection" but status always stay Idle (not running).
    LMS 3.2
    Campus Manager 5.2.1
    Thanks

    most likely you are hitting the following bug CSCtd49439

  • Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2

    Hi Friends,
    While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
    Thnx

    The name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
    Have you tried this
    http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
    regards
    Nasir

  • Activate PO Document Approval Manager

    Cold anyone please tell me how to activate "PO Document Approval Manager" in OAM in 11i as i just received this request from my functional guy?
    Thanks
    J

    Pl post details of OS, database and EBS versions.
    Using the System Administrator responsibility, navigate to Concurrent --> Manager --> Define, query up "PO Document Approval Manager", then click the "Work Shifts" button and set the "Processes" field to an appropriate value, and save.
    In R12, the functionality of this manager has been changed significantly.
    How To Plan The Number Of Processes Required By PO Document Approval Manager After R12 (Doc ID 735474.1)
    HTH
    Srini

  • CW LMS 3.0.1 not working after updating Campus manager to 5.0.6

    Hi,
    I upgraded my CW Campus Manager from 5.0.5 to 5.0.6, and now when I try to access CW I get :
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Any idea how to fix this?
    Thanks in advance

    Post the NMSROOT/MDC/Apache/logs/error.log and NMSROOT/MDC/tomcat/logs/stdout.log and stderr.log.

Maybe you are looking for