Activate IS-AUTO including IPPE functionality
Hi,
I want to activate IS-AUTO functionality with IPPE.
After activation it should allow executing PPE transaction.
I referred [http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/48bea654b44901e10000000a1553f7/frameset.htm|http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/48bea654b44901e10000000a1553f7/frameset.htm] and activated EA-PLM entension. But this, did not help executing PPE transaction.
Can someone let me know where can I check appropriate extensions to be activated for IS-AUTO with IPPE?
Regards,
Chintan
Hi,
There is no such standard BAPI we need to develop the ABAP program.
And the phase will be appended to the end of structure as there is constraint of Phase number
Shiv
Similar Messages
-
Need to custom build cProjects Auto Include (task) functionality
Hello all,
We are currently building a reskinning application for cProjects (and DMS) and one of the requirements is to choose a phase in a cProjects project and "Include" a set of tasks from a task template. Do you know if there is any BAPI to the same?
I have explored all possibilities and didnt find any standard BAPI to do it. Only solution seems to be getting the structure and details of the tasks we are supposed to be including and creating news tasks with those details in the current project. But that doesnt sound to be a good solution. Can someone help?
Again, upon clicking a button, i need to create a set of tasks in the current project based upon a template.
Thanks a lot in advance.
UmaHi,
There is no such standard BAPI we need to develop the ABAP program.
And the phase will be appended to the end of structure as there is constraint of Phase number
Shiv -
Auto Sync not functioning properly after Auto Tone
Auto Sync is functioning as expected, unless I choose Auto Tone first.
I have about 1000 Images that I wish to apply a Preset to. When I created the Preset using New Develop Preset, I left all of the options checked except Exposure.
I want to use Auto Tone to set the exposure for each image automatically, and then apply my preset to all images, leaving their exposures unchanged. If I apply the Preset to all of the images before selecting Auto Tone, everyting works as expected. If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not. The preset will change all settings except those in the Basic Tone area. It's as if Auto Tone has somehow become "sticky" and will not allow itself to be overridden. Even if I choose a single image, apply my new settings to it, and then manually select Sync, it doesn't work for all images. It also won't work if I have have Auto Sync selected, and then make manual changes to individual sliders. It will work for some images near the ones I see in the filmstrip on the bottom, but not all of the images selected.
This is extremely frustrating. Again, everything works exactly as expected, unless I choose Auto Tone first.kbarre wrote:
Auto Sync is functioning as expected, unless I choose Auto Tone first.
If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
Try this:
* do the auto-toning, then let it percolate for a while.
* then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
Better?
I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
Rob -
Dreamweaver CS4 auto close not functioning properly
Hey everyone,
A friend just gave me a trial version of Dreamweaver and I've been testing it out. However I found it odd that some tags auto-close and some don't. An example of this is when I put the <b> tag it auto-closes, but when I type in a <div> tag it doesn't. I already changed the preferences so tags are closed after the opening tags ">". Just wondering if there is another preference I need to change or a bug in the software.
Any help would be appreciated.
Thanks in advance,
GKkbarre wrote:
Auto Sync is functioning as expected, unless I choose Auto Tone first.
If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
Try this:
* do the auto-toning, then let it percolate for a while.
* then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
Better?
I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
Rob -
How to define a keyboard shortcut that includes a function key?
I was trying to set up a keyboard shortcut for a Service in Sys.Prefs -> Keyboard -> Keyboard Shortcuts and discovered that if I attempt to use a function key as a part of the shortcut that it disappears out of the key entry field as soon I click off the item. The keys I press (including an "F#" representing the function key that I've pressed) show up briefly in the field but then go away.
Entering keystrokes that do not include a function key seem to work fine.
Function keys are used as a part of many of the default keyboard shortcuts. So is there maybe a trick for entering a function key in the pref pane as part of a user defined shortcut that I just don't know about? Or is this maybe a bug in the pref pane? Or any other explanation for what I'm seeing?
This is on a Snow Leopard 10.6.3 machine.
Thanks,
SteveR C-R wrote:
Function keys are regular keystrokes, just like for letters, numbers, or punctuation marks. Thus, just like the others, you can use them only by themselves or in combination with modifier keys (shift, command, control, & option) in keyboard shortcuts.
IOW, a valid shortcut would be F4 or command + F4 but not F4 + any regular key.
It's good to know that regular keys are not allowed with function keys, but it doesn't explain the problem. I initially tried using command + various function keys and when that wouldn't "stick" I tried just various function keys which also wouldn't work.
And like I said... it looks like it's going to accept the key(s) I press by showing the textual representation of the key in the key field (such as "F4" or "F5") but as soon as I click outside the text field it vanishes.
The problem was mentioned to me by another person and I was able to duplicate it, so it's not just me or my machine. Just out of curiosity, does it work for you?
Steve -
How to activate uni code check in function pool.
hi experts,
how to activate uni code check in function pool.
pls give needy
regards,
praveenhi praveen,
for every report we can check unicode flag in the attributes.
function pool is also a type report.
for classes it is not possible to enable directly.
for this we have TCODE UCCHECK.
enable it by using above. -
Hello again guys,
long time no see ,since yesterday as far as I remember
Talking about Auto Power Off function , is there anyone that can tell us , it could be used on long terms - many days for example - as long as no one push the shutter or any button to wake the "beast" ?
This function completly shut down the camera or it's a kind of sleep function and some parts remain power supplied ?
Thanks,
Solved!
Go to Solution.It's not completly shutdown. However, it should not cost too much power if any at all. I have it on for a week. Unless you turn on the GPS. With GPS turned on, even if you turn off the camera, it is still active.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Simple Examples on ABAP Objects without using include or function modules
Hi,
I am new to ABAP. I need simple example codes on ABAP Objects. It should not have Includes or Function Modules. Just simple codes, using local & global classes, interfaces etc. I searched the forum and even <<the site that shall not be mentioned>>, but did not find a solution. Kindly help please.
Regards,
Smruthi.
Edited by: Matt on Mar 1, 2009 1:20 PM - forbidden site reference removedHello Smruthi
If you go to the Forum Search and choose the forum ABAP Objects then serach for ZUS_SDN and you will find many of my simple sample reports.
These reports usually do not contain any includes but they may call function modules which makes perfectly sense. For example, if you are still doing a direct table SELECT instead of using an available BAPI (or class) to get a business object then this is a clear sign of poor (=non-ABAP-OO) programming.
Regards
Uwe -
What are the Includes in Function Module...? if the fuction group IS ZSJ_FC..?
How can I access SAP through Internet....?
Moderator Message: Interview-like question(s). Thread locked.
Edited by: Suhas Saha on Sep 30, 2011 11:14 AMHi
No! U can insert an own you Z-INCLUDE or somethingelse, try to regenerate the index of the program.
Max -
Hi Gurus
Need help on AutoCreate Document Program on PO.
The user creates PR in 2 currency i.e. one will be Base and other Foreign Currency. Now to create PO, we make use of Auto create document functionality in which there is an option to change the source type of currency i.e. 3 values namely Default, First Requisition Line and Specify.
Can you please let me know if we can make the option First Requisition Line to default as the value ?
Can we schedule the auto create doc request so that there is no manual intervention?
ThanksCan you please let me know if we can make the option First Requisition Line to default as the value ?
Don't think so.
Can we schedule the auto create doc request so that there is no manual intervention?
Yes but you need to make sure you have the ASL and SR setup correctly. If you want PO to be approved automatically, make sure you use the correct release method and that the approval hierarchy/limits are set correctly.
Sandeep Gandhi -
Creating Includes for Function Modules
Hi Experts,
Can you please let me know how to create includes for function modules.
I came across this in a standard include program, which was generated by a function library. The includes inside this program where linked to the function modules (when I double clicked on them).
Please let me know how to create it.
Thanks in advance !
Regards,
Anand Patil.Hi,
have a look at the code for better understanding
Declaration of Workareas *
DATA: lwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create,
lwa_data TYPE edidd, " Work area for IDOC
lwa_control TYPE edidc. " Work Area for control rec
Read the control data information of idoc.
loop at idoc_contrl INTO lwa_control Where mestyp = lc_mbgmcr.
Extract the data from the segments.
LOOP AT idoc_data INTO lwa_data
WHERE docnum = lwa_control-docnum and
segnam = lc_item_create.
*->> Set the tabix of the internal table
lv_index = sy-tabix.
Move the Material Document Item Segment data
MOVE lwa_data-sdata TO lwa_e1bp2017_gm_item_create.
Modify the material document item data internal table
PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create.
*->> set the changed values to the IDOC SDATA
MOVE lwa_e1bp2017_gm_item_create TO lwa_data-sdata.
*->> Modify the table
MODIFY idoc_data FROM lwa_data index lv_index.
Clear the Work areas
CLEAR : lwa_data,
lwa_e1bp2017_gm_item_create.
ENDLOOP. "LOOP AT t_idoc_data
Call the BAPI function module to create the
appropriate Material Document
CALL FUNCTION 'BAPI_IDOC_INPUT1'
EXPORTING
input_method = input_method
mass_processing = mass_processing
IMPORTING
workflow_result = workflow_result
application_variable = application_variable
in_update_task = in_update_task
call_transaction_done = call_transaction_done
TABLES
idoc_contrl = idoc_contrl
idoc_data = idoc_data
idoc_status = idoc_status
return_variables = return_variables
serialization_info = serialization_info
EXCEPTIONS
wrong_function_called = 1
OTHERS = 2.
IF sy-subrc = 1.
RAISE wrong_function_called.
ENDIF.
endloop.
ENDFUNCTION.
here when we write the statment
PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create and double click on sub_modify_idocdata .
it will create a include with the name "LZDTSINT052F_GPOMS_GMF01 ".
now we can write the FORM ..END FORM In this inculde.like this.
***INCLUDE LZDTSINT052F_GPOMS_GMF01 .
*& Form sub_modify_idocdata
Modify the material document item data internal table
FORM sub_modify_idocdata
CHANGING pwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create.
contant declaration
CONSTANTS: lc_261(3) TYPE c VALUE '261'.
DATA : lv_aplzl LIKE resb-aplzl,
lv_aufpl LIKE resb-aufpl,
lv_subrc LIKE sy-subrc,
lv_charg LIKE resb-charg,
lv_uom LIKE pwa_e1bp2017_gm_item_create-entry_uom.
CLEAR: pwa_e1bp2017_gm_item_create-reserv_no,
pwa_e1bp2017_gm_item_create-res_item.
*->> Get SAP storage bin & Storage type from the Z table
SELECT lgtyp lgpla
INTO (pwa_e1bp2017_gm_item_create-stge_type,
pwa_e1bp2017_gm_item_create-stge_bin)
UP TO 1 ROWS
FROM zdtsint050_sttyp
WHERE zstorage_typ = pwa_e1bp2017_gm_item_create-stge_type
AND zstorage_bin = pwa_e1bp2017_gm_item_create-stge_bin.
ENDSELECT.
IF sy-subrc NE 0.
CLEAR: pwa_e1bp2017_gm_item_create-stge_type,
pwa_e1bp2017_gm_item_create-stge_bin.
ENDIF.
PERFORM get_oper CHANGING pwa_e1bp2017_gm_item_create.
Get the Reservation number and Reservation item number
basing on the idoc data.
SELECT rspos werks lgort
INTO (pwa_e1bp2017_gm_item_create-res_item,
pwa_e1bp2017_gm_item_create-plant,
pwa_e1bp2017_gm_item_create-stge_loc)
FROM resb
UP TO 1 ROWS
WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
AND matnr = pwa_e1bp2017_gm_item_create-material
AND charg = pwa_e1bp2017_gm_item_create-batch
AND aufnr = pwa_e1bp2017_gm_item_create-orderid
AND vornr = pwa_e1bp2017_gm_item_create-activity
AND bwart = lc_261.
ENDSELECT.
IF sy-subrc <> 0.
Start of insertion for R31K993797
CLEAR lv_charg.
SELECT rspos werks lgort
INTO (pwa_e1bp2017_gm_item_create-res_item,
pwa_e1bp2017_gm_item_create-plant,
pwa_e1bp2017_gm_item_create-stge_loc)
FROM resb
UP TO 1 ROWS
WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
AND matnr = pwa_e1bp2017_gm_item_create-material
AND charg = lv_charg
AND aufnr = pwa_e1bp2017_gm_item_create-orderid
AND vornr = pwa_e1bp2017_gm_item_create-activity
AND ( splkz = 'X' or
splkz = space )
AND bwart = lc_261.
ENDSELECT.
IF sy-subrc <> 0.
End of insertion for R31K993797
SELECT SINGLE werks lgort
INTO (pwa_e1bp2017_gm_item_create-plant,
pwa_e1bp2017_gm_item_create-stge_loc)
FROM resb
WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no.
CLEAR : pwa_e1bp2017_gm_item_create-reserv_no,
pwa_e1bp2017_gm_item_create-res_item.
ENDIF.
ENDIF.
get SAP UOM
SELECT SINGLE zsap_uom
INTO lv_uom
FROM zca_uom_conv
WHERE zext_uom = pwa_e1bp2017_gm_item_create-entry_uom.
IF sy-subrc = 0.
pwa_e1bp2017_gm_item_create-entry_uom = lv_uom.
ENDIF.
ENDFORM. " sub_modify_idocdata
*& Form get_oper
Get the operation
<--P_PWA_E1BP2017_GM_ITEM_CREATE_RE Segment
FORM get_oper CHANGING p_pwa_e1bp2017_gm_item_create TYPE
e1bp2017_gm_item_create.
DATA : l_aufpl LIKE afko-aufpl,
l_aplzl LIKE afvc-aplzl.
REFRESH : i_op.
UNPACK p_pwa_e1bp2017_gm_item_create-orderid TO
p_pwa_e1bp2017_gm_item_create-orderid.
Get the reservation and routing number for the order
SELECT SINGLE
rsnum
aufpl
FROM afko
INTO (p_pwa_e1bp2017_gm_item_create-reserv_no,
l_aufpl)
WHERE aufnr = p_pwa_e1bp2017_gm_item_create-orderid.
IF sy-subrc = 0.
CALL FUNCTION 'CONVERSION_EXIT_NUMCV_INPUT'
EXPORTING
input = p_pwa_e1bp2017_gm_item_create-activity
IMPORTING
output = p_pwa_e1bp2017_gm_item_create-activity.
ENDIF.
ENDFORM. " get_oper
Regards,
nagaraj -
How to include new functionality into WAS
Hi,
how can I include new functionality from external C sources into WAS.
I mean a my own functions callable from ABAP by statement "CALL cfunc" (call system function) ?
Thanks.
MarianHi,
You may want to use RFC for the same.
Check this link:
http://help.sap.com/saphelp_nw70/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm
Regards,
Siddhesh -
Hi all,
Does anybody know whether is there an auto fail over function builded into the new PDF Generator software engine?
Thanks in advanceIf there is an underlying exception, it will be in the bottom-most "caused by" of the exception thrown by ODSI. Or in the SOAP Fault if using the web-service API. So the real question is - why can't you get the exception information you need without using fail-over?
- Mike
Last resort, not recommended, ...
If you insist on re-inventing the wheel - use fail-over in the very-top query only. Define all your top-level queries to return an element that contains a "choice" (google on xml schema choice) of the expected result or your <errorElement>, then your top-level queries will look like ...
function myFunction( $arg0 as xs:string ... ) as element(myElementOrError)* {
failover( myBadFunction($arg0 ...) , <errorElement> .... </errorElement> )
Notice that there is NO WAY to populate <errorElement> with the underlying exception that occurred in myBadFunction(). The client is going to get a message like "myBadFunction failed" - which is not really helpful at all. The client (or audit provider) could find the underlying failure - it is output in the audit stream if so configured). There is a try/catch in XQSE - but XQSE does not optimize at all.
In the end, all I can say is that you are pursuing a really difficult way to achieve something that you get automatically. Your client has to handle exceptions / SOAP faults anyway (if the ODSI server is down, for instance). Thus your client can keep calling getCause() to to get to the bottom exception. ODSI converts/replaces the actual exception class with it's own exception class - so that the client doesn't get a de-serialization error attempting to de-serialize a class that it does not have access to. -
Does Logic Pro X include replacement functionality for Compressor, Soundtrack Pro and Waveburner from Logic Studio 9?
No.. You can buy the Compressor (along with Mainstage) via the App Store as a separate download but STP and Waveburner are discontinued products. Some of STP's functionality can now be found in Final Cut Pro X...
Note: Mainstage, Compressor, Waveburner and STP were part of the full version of Logic Studio 2.0 (which also included Logic Pro 9 ) and sold for $999 compared to Logic Pro X which retails at $200...
The Apple loops/Jam packs that came as part of Logic Studio 2.0 now come free with Logic Pro X (and did so with the Appe store version of Logic Pro 9) .. as part of the additional downlaod -
How can i activate the auto tag complete
Hi,
where can i activate the function that automatically suggesting tags?
for example after i type in <div alg .... it show me the alternative options for this tag...
it was standard activated but i don't find where i have deactivate this function
ThanksHi Ken,
thanks for the answer. But i don't look for auto close.
in looking for he option "automatically suggesting tags"..
bevor it was like this: i insert <div style="f then it shom me the
alternative tags for al options with f...
or when i typ in & it show me all possibilities for &....
like here:
Maybe you are looking for
-
The message "Your phone number is now being used for imessage on a new iPhone" Keeps appearing on my macbook pro. It also says "If you just activated iMessage on a new iPhone, you can ignore this alert." But the only option is to ignore the alert, be
-
Execution Permissions cannot be required error when opening SharePoint Central Administration
The following is the stack trace can anyone share what might be causing and how to resolve this. Execution permission cannot be acquired. Description: An unhandled exception occurred during the execution of the current web request. Please review the
-
Im trying to port some plugins from CS4 to CS5. During the process I encounter several errors. Once of them is listed below. Error 1 fatal error C1189: #error : DEBUG and NDEBUG are out of sync! // $$$ need to set NDEBUG in release builds c:\prog
-
Easy to explain, not easy to fix. Have loaded Master Collection CS6 trial and can't get Premiere Pro to load. It hangs on the splash screen for a while, before coming up with the message: Adobe Premiere Pro CS6 has stopped working. No other clue abou
-
How the PCUI event for export button works?
Hi All, After get the order search result in PCUI, when I click the Export button. It show me the message that : Microsoft office 2003 or higher is not installed on your computer. In fact, I have the office 2003. And I found that the event for Export