Activate items from Business Cont. without change existing system
Hi all,
I plan to activate some Infoobjects, DSO and InfoCubes from the Business content. In order to avoid some big issue I'like to know if there is a procedure to follow. My main fear is to Activate all the business content and to overwrite the existing objects..
Thanks for your adivises
jak
Hi,
Its always good to leverage functionality provided my SAP. You should go ahead any activate the object you want in the system.
Only those object which are selected by you will get activate.
And if they already activated in the system then it will show a green light next to them . In that case you need not activate them. Because it will overwrite the existing objects
I would advise you to choose only necessary object in 'Grouping'.
for detailed explaination refer this article :
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/activating%20the%20standard%20bi%20report.pdf
regard
vivek
Similar Messages
-
Activate 0MAT_UNIT from Business Content
BW experts,
I am trying to activate 0MAT_UNIT from Business content. Well I collected the object in the Business concent screen and clicked install. But in RSA1 I do not see this info Object. Did I miss anything?
Thanks
AshwinHi A .H. P,
Well I got the solution from one of the SAP notes, it states that often because of the inconsistencies in the RSDIOBCIOBJ table this problem occurs and the solution to this is to execute the RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
Function module RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute
Refer Note 573421.
This solved my problem. Just putting this up here if anyone in future come across the same problem.
Thanks
Ashwin -
Removing items from sheet doesn't change SQL
Discoverer desktop 10.1.2.1
When I create a sheet, run it, then remove items from the sheet, and then refresh it, the SQL doesn't change (items/columns that were removed remain in the select statement). They (columns) are removed from the resulting report, but it's throwing off my results (number of rows due to summary items). In other words, I had detail numbers, replace them with summary numbers, now it should be grouping by the detail items, but it's isn't. Basically, the tool isn't removing those items from the SQL.
Has anyone seen this?
Thanks in advance.I'll chime in on this one - we're seeing this same behavior as well. I can reproduce the problem at will like so:
1) Create a new sheet.
2) Pick a table, any table, that has a data point.
3) To this new sheet, add the DETAIL of the data point, and one other attribute.
4) View the results - they are good.
5) Realize you made a misteak, go to Edit Sheet, remove the DETAIL and replace it with the SUM of that same data point.
6) View the results, and become dismayed that they are not grouping at all.
7) Click on View->SQL Inspector, and observe the detail item is still in the SQL (along with the SUM) despite having removed it in the sheet editor.
8) Edit sheet - remove all items leaving absolutely everything blank (no selected items, no columns, no calculations, no sorts, nothing)
9) Click on View->SQL Inspector, and observe the detail item is still in the SQL. That's wrong!
If that's not a bug, I'm czar of all the Russias.
// Discoverer Desktop 10.1.2.1
// Discoverer Desktop Client 10.1.2.48.18
// EUL Library 10.1.2.48.18
// EUL 5.1.1.0.0.0 -
How do I remove items from the cloud without losing them permanently?
My icloud storage is almost full. How do I remove items from the cloud and not lose them?
What items?
Purchased music, movies, TV shows, apps, and books do not use up your iCloud storage.
See the link below for how to reduce the amount of storage you're using:
http://support.apple.com/kb/HT4847 -
How do I remove individual photos from the ipad2 without affecting the photo album in my lap top where the photo album resides?
You don't.
To remove a photo from your iPad that is located in a photo album on your computer selected to be transferred to your iPad under the Photos tab for your iPad sync preferences with iTunes, the only way to remove the photo from your iPad is by removing if from the album on your computer followed by a sync. -
Impact of Changing existing system international to Country specific(24)
Dear Experts,
Current system has to two company code - A & B with international payroll.
Client is adding two more company code say eg. C & D as roll out process with country specific (24).we are planing to change existing company code(A & B) in to country specfic (24). If change what impact does system have?
Regards
Vinodh L KIf I understand your question correctly, you currently have a web application that uses Classic authentication that you would like to migrate to use Claims (SAML). Are your users still going to use their existing NTLM (Active Directory) accounts to connect
to SharePoint? If so, you need to follow the steps outlined in the Technet article below:
http://technet.microsoft.com/en-us/library/gg251984%28v=office.14%29.aspx
I have migrated web applications from Classic to Claims in the past and it didn't take terribly long (on the order of minutes to hours, not days).
Danny Jessee
MCPD - SharePoint Developer 2010
MCTS - SharePoint 2010, Configuring
dannyjessee.com/blog -
How to change color of font in JTextArea without changing existing text ?
Is there some way to keep the existing text in one color / size and change the color / size
of the yet "unwritten" part of text ?
Edited by: pimpcane on Dec 11, 2007 9:53 AMThe very first paragraph of the API documentation says
"A JTextArea is a multi-line area that displays plain text. It is intended to be a lightweight component that provides source compatibility with the java.awt.TextArea class where it can reasonably do so. You can find information and examples of using all the text components in Using Text Components, a section in The Java Tutorial."
In other words, if it isn't obvious from that, no. The actual link to the tutorial doesn't show up here but if you go to the API documentation you'll find it there. -
Transfering photos from different pcs without deleting existing photos
How can i copy photos to ipad if i use different pcs in every 2 weeks, without losing the existing photos?i think itunes will delete them. I am traveling and dont have a home computer.thanks
Syncing photos via iTunes you can't, as only the most recent photo sync remains on the iPad. There are third-party apps such as Simple Transfer which can copy photos to / from your iPad and a computer via your wifi network, though the photos will only go into the Camera Roll / Saved Photos album in the Photos app - but if you have iOS 5 you can then copy them into new albums directly on the iPad. Or you can do a similar thing via the camera connection kit.
-
How to activate datasource from business content
Hi all
please let me know the procedure to activate the datasources(r/3) for objects delivered from the business content(ex infocube, update rules, infosources,....) all delevered from the businss content...
suppose if we create our own infocube we define
1.maintain datasource in r/3
2.replicate that in bw system
3.and further process
let me know how we do this when we transfer objects from d version to a version in business content
thanx and regards
Balaraj.Bchk this:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Thanks,
raj -
Unable to Activate Infocube from Business Content BI 7.0
Hi,
While activating an infocube from the business content I am getting the error "OBJECTS_OBJREF_NOT_ASSIGNED"."The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
terminated because it has come across a statement that unfortunately cannot be executed."
This is applicable to all the cubes .I am working in BI 7.0.Could you please let me know incase you have come across a similar error.
Thanks in advance.
Best Regards,
Dushaynt.Thanks a lot,
As i have tried that same before i check your reply and i got solved problem as you have mentioned here.
Now i can active any cubes,
thanks.
I still see some error related to OPAK jobs,related to infopackage while activating the cube.Have u ever encountered the same ?
Best Regards,
dushyant. -
How can I download songs from my library without deleting existing songs
I have just imported a CD into my itunes library. I then manually tried to import only the songs from the CD onto my ipod .I did this by selecting the manual update option to only import selected songs. However after the songs were loaded, the previous songs on my ipod were no longer there. Can anyone help
Oi! Lou!
You can't load songs from a CD straight to your iPod. You must first rip them into iTunes and then transfer to your iPod. Also, if you want to transfer songs manually to iPod, make sure that you are not set up for automatic sync with iTunes.
Good luck,
maz -
Configurations to post 850 from Business partner to our SAP system
Hey Guys
i m doing a EDI 850 to IDOC scenario and need to send Functional acknowledgment back to the business partner.
The business partner sends us the Purchase order via VAN ,we do the message mapping within XI and then post it to our SAP R/3 system as ORDERS05.
so this scenario is a simple 850->XI->ORDERS05.
so i configured a Seeburger FTP sender adapter,gave the mapping name under modules tab ,configured a received IDOC adapter and posted the message to SAP R/3 system.
Now the issue is in sending the acknowledgement 997 back to the business partner.
My questions are:
1)How will the acknowledgement be triggered,is it automatically triggered or we need to do something with IDOC STATUS.SYSTAT01?
2)How will i configure my adapters to send the acknowledgement back to the Business partner.i guess i need to use split997,will it be configured as sender or receiver?
Thanx
Saif
Pl:I have gone through all the links on seeburger.Hi Saif,
if you have to do a functional ack. This is a standard functionality available in Seeburger.
If you see your sender communication channel ther will be modules ....like
Classifer-> BIC>Spliter--->CallAdapter
the BIC will do the Main mapping (for the fun. ack. 997) and child mapping ( for your PO) and post two messages into XI server.
You can map the main mapping payload and send it back to the business partner as a functional acknowledgement (997)
if you are refering to Orders Ack. ie, the ack. of successfully posted Orders in the backend.
You have to trigger an outbound ORDERSP onces the inbound ORDERS05 idoc posted by maintaing the proper Out put types .
Map this outbound ORDERS idoc to EDI 855 structures and send it to the VAN of business partner.
Regards,
Sunil. -
Exit from a Frame without resorting to System.exit()
This is driving me nuts.
I've got a really simple problem, actually... I've got a Frame and I'm trying to get rid of it so my application will exit.
Though using System.exit() seems to be the most common way to get an application to exit, I'd prefer to avoid going that route. My program uses multiple threads, and I want to give them all a chance to exit gracefully before the application exits, as opposed to terminating them all quite suddenly. All the threads monitor a boolean value, "exiting", and terminate, after some cleanup, when the variable is set. Using join() on all the threads before using System.exit() would work, except any number of threads may be created by the program, and not all of them will be accessible by the function doing the exiting!
If I simply omit the call to System.exit(), and remove the Frame with dispose(), the threads all shut down properly, and the program appears to have exited, except the command prompt doesn't reappear until I hit Ctrl-C.
So I looked up the docs for the dispose() method. It was slightly different than I remembered... Obviously, that method is not the way to shut down a Frame. What is?So I looked up the docs for the dispose() method. It
was slightly different than I remembered...
Obviously, that method is not the way to shut down a
Frame. What is?The problem is that once you use some GUI, a pool of AWT threads is created and they are not shut down, not even if there is no more GUI visible.
Look at these other threads for some explanation on this behaviour an workarounds:
http://forum.java.sun.com/thread.jspa?forumID=5&threadID=10901
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=122569 -
How to get selected items from a tree in backing bean without adfbc
Hi ADF Experts,
Below is my code for af:tree. My question is how can I get selected Items from the selectionListener (without adf bc) this uses formation of tree from backing bean.
Using Jdev 11.1.1.7.0
<af:tree var="node" value="#{pageFlowScope.MerchandizeBean.model}"
binding="#{pageFlowScope.MerchandizeBean.treeModel}" id="tree" immediate="true" autoHeightRows="0"
styleClass="AFStretchWidth" rowSelection="multiple"
selectionListener="#{pageFlowScope.MerchandizeBean.treeNodeSelection}">
<f:facet name="nodeStamp">
<af:commandLink text="#{node.classDescription}"
actionListener="#{pageFlowScope.MerchandizeBean.createListManyItemForMerchandise}" id="displayTable" partialSubmit="true">
</af:commandLink>
</f:facet>
</af:tree>
public void treeNodeSelection(SelectionEvent selectionEvent) {
// Add event code here...
RichTree tree = (RichTree)selectionEvent.getSource();
TreeModel model = (TreeModel)tree.getValue();
//get selected value
Thanks
RoyHi,
in a multi select case, try
RowKeySet rks = tree.getSelectedRowKeys();
Iterator iter = rks.iterator();
while(iterator.hasNext()){
Object aKey = iterator.next();
tree. setRowKey(aKey);
Object rowData ? tree.getRowData();
.... do something with the data here ...
Frank -
Hide Unit price from sales order for sales user without change authorization of document setting
Hi all expert
Hide Unit price from sales user without change authorization of document setting.
I have also refer this note
SAP B1 2005 Purchas Order,Good Reciept PO'S, and Unit Price Block
but sill I had not getting my proper solution.
I want to restrict sales person to see & access unit price. Here I know option of block authorization of document setting but its not good option because , In future ,if sales user wants to changes forms setting in future so Its become problematic for user. so I want do this without restrict user for form setting & only hide unit price table from him/her. also He/her able to access form setting with out unit price.
Please reply
Amol NikamHi Experts,
Please Tell me Is there any option "Hide Unit price from sales order for sales user without change authorization of document setting"
Regards/Thanks
Amol
Maybe you are looking for
-
Issue in 7.3 - The Work area is not long enough
Hello All, currently i am facing issue in my new BI 7.3 server when i try to execute planning sequence, i am getting the below error: We have recently moved from 7.0 to 7.3 version very recently and when i try to execute the planning seq it raises ab
-
Question on the engineering behind Swing
I have been using the AWT for 5 years and love it, but I'd like to have Trees and Tables, etc. My question is this: Why do applets and applications that use Swing for their UI paint v-a-r-y slowly and sometimes don't work, or don't repaint when a men
-
What is the real scm latest version ?
What is the real scm latest version/patchset ? 10g, 9i or 9.0.4 ??
-
If you install Visual Studio 2015 with the Windows 10 Mobile emulators in a virtual machine, setup will succeed but the emulators will not be available as valid debug targets.
-
Track the qeries that accessed a particular object during a time period
HI, I have a list of objects on my schema and i need to track the list of sql queries by different users that accessed by object during this time period. i haven't enabled any auditing yet. is there any way i can get that list of queries and their sc