Activate more than one Aggregation Level

Hello experts,
We use the Integrated Planning and we have more than 80 Aggregation Levels. When the MultiProvider is deactived because of adding a new InfoObject, all our Aggregation Levels are deactivated.
Is there a possibility to activate more than one Aggregation Level at once? Maybe a special report?
Thank you.

Hi,
please check:
[Re: Activate all the Aggregation level of underlying multi provider]
Gregor wrote a small program and posted it to the forum. Please note: There is no support for this tool.
Bye Matthias

Similar Messages

Can't SSAS engines make use of more than one aggregation to answer a query?!

I have a very simple cube (just for testing and training) . This cube contains two dimensions: [Dim Soccer Player] contains one attribute hierarchy [player name], the other dimension
is [Dim Match Acts] contains also one attribute [Acts] which has values like fouls, goals, saves, tackles… etc. And of course a Fact that contains one measure of Just Count ... that simple ... so this cube can
answers a question like how many goals scored by "Messi", for example ... a very simple trivial cube.
I'm testing aggregations and their effect. so first I've designed one aggregation (Aggregation 0) on the granularity level of [Player name], then
I run a query to get the count of ALL the[Acts] done by each [Player name] ... I've checked the SQL Profiler and I found that the aggregation was used.
Then I cleared the cache, and I run another query, but this time to get just the number of Fouls committed by each [Player name], I checked the Profiler but the Aggregation 0 was NOT used.
I went back to the aggregations design tab in BIDS, and I added another new aggregation (Aggregation 1) on the level of [Acts], so now I have two aggregation one on the granularity level of
[Player name] and the second on the level of the [Acts].... I cleared the cache again and rerun the last query. NONE of the aggregation was used!
In the third test I deleted Aggregation 1 and added [Acts] to Aggregation 0. so Aggregation 0 now on both [Player name] AND [Acts]... cleared the cache and rerun the last query. Aggregation
0 appeared again.
I just want to make sure (and if possible know why) the SSAS engine can't make use of and combine more than one aggregation to serve a query (point number 2), and that to design an aggregation
that will serve a query which contains attributes from different dimensions, I have to add ALL the attributes in that query in that one aggregation, like point 3 ... is this true?!

I think you are on the right track. You need to include all the attributes used in one query in the same aggregation (like #3) for it to be used. Example #2 works as I would expect. Queries above the grain of the agg (query by player name and an agg by
player/act can be used) can be used. Queries below grain of the agg (example #2) can't use the agg.
http://artisconsulting.com/Blogs/GregGalloway

Having placed more than one top-level VI in builder, is there a way to programmatically call the second application?

Builder allows for more than one Top-Level VI. The resulting Executable launches both applications at once. If I terminate one application, is there anyway to launch it again programmatically?

You could monitor the names of all the VI's in memory. If the one you want running is not in the list, you can launch it dynamically.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

More than one summary level for a matrix with group

Hello friends at www.oracle.com ,
I have a report where I need to create a summary level for each row and column. In the Report wizard, it works finely, creating the summary for the 1st matrix group level.
However, if I have some extra matrix group levels - that is, a 2nd or a 3rd level -, it seems that Reports doesn't create its summary levels.
How can I create other summary levels at the matrix, outside the inner matrix?
Best regards,
Franklin Goncalves Jr.

Hello petpandian,
I have a little example that intends to demonstrate what I really need. Hope it is clear enough.
(Below you can see the output I am looking for)
..................MONTH/YEAR
CITY REGION 04/2005.....05/2005
AA.....BB......$ 10,00.....$ 15,00
...............$ 11,00.....$ 16,00
Totals for BB: $ 21,00.....$ 31,00
..................MONTH/YEAR
CITY REGION 04/2005.....05/2005
AA.....CC......$ 30,00.....$ 11,00
...............$ 40,00.....$ 15,00
Totals for CC: $ 70,00.....$ 26,00
Totals for AA: $ 91,00.....$ 57,00 <-- Totals separated for each region and month/year.
As you can see, I need a matrix with group(s) around it. 1st group level is the city (AA), and I have its regions BB and CC. After showing BB values, I have BB totals for each month/year. Same applies to CC totals.
However, I expect that these results can be showed for its outside group (in this example, CITY AA), and what I have in return is the sum of all values in a single field:
Totals for CC: $ 70,00.....$ 26,00
Totals for AA:.....................$148,00 <--- The sum of all totals: it's not separated as above.
I think I should have a matrix inside a matrix, so I would have totals for each region, and totals for each city, separating by its regions and month/year.
The only solution I found was to calculate it manually via PL/SQL and inserting it into a temporary table. However, I think it is not the ideal solution because PL/SQL instructions have to handle the totals, something that Reports should do, and that's why I need help.
Your help will be greatly appreciated. Thanks in advance.
Best regards,
Franklin Goncalves Jr.

Activating more than one iphone

How many iphones can you activate on itunes. If you can activate more than one, will the songs and applications you download into itunes be able to be put on more than one phone or just one.

I don't believe there is a limit for the number of iPhones that can be activated with iTunes on a single computer, and I don't believe there is a limit for the number of iPods and/or iPhones that can be synced with the same iTunes library.
There is a 5 computer limit for the number of computers that can be authorized with the same iTunes account, but not for the number of iPods and/or iPhone that can be synced with the same iTunes library.

Dashboards - More than one level deep

Is there a way to create a Dashboards more than one-level deep. Currently I can put a Dashboard within another Dashboard (Getting the flyout menu when I select the top-level dashboard in the Interface). However, what if I want to go one level deeper? So have Dashboard Header show as the link, a flyout menu with Dashboard 1, then another flyout menu off of Dashboard 1 having the link for Dashboard 2.
I saw this tag DashboardMaxBeforeMenu but don't know if this resolves the issue above as I tried to implement and still was not able to set up the above scenario.
Thanks.

Hi Mike,
Sorry for the delay. The whole team has been busy with JavaONE for the past week.
We currently do not support reverse engineering of an operation to a sequence diagram more than one level deep. I opened an enhancement request for you:
http://www.netbeans.org/issues/show_bug.cgi?id=103780
The UML pack is now part of NetBeans. Check out these links for the latest info regarding UML:
http://www.netbeans.org/products/uml/
http://uml.netbeans.org/
Thanks,
George

Reverse engineering sequence diagram with more than one level deep

Hello,
When I generate sequence diagram from a method with Java Studio Enterprise 8.1, it only shows the method called directly by this method.
Can I also show the methods that are called by the other methods that the one I'm generating the diagram from?
Thanks,
Mike

Hi Mike,
Sorry for the delay. The whole team has been busy with JavaONE for the past week.
We currently do not support reverse engineering of an operation to a sequence diagram more than one level deep. I opened an enhancement request for you:
http://www.netbeans.org/issues/show_bug.cgi?id=103780
The UML pack is now part of NetBeans. Check out these links for the latest info regarding UML:
http://www.netbeans.org/products/uml/
http://uml.netbeans.org/
Thanks,
George

Gantt subbtasks - more than one level?

Hi,
can project gantt show more than one level of subtasks? I can expand just first level tasks, but when I clik on the second level, the "+" sign changes to a flashing circle and that's it...

I just noticed I can expand all levels if I select View->.....->Expand all
So, it should I guess, but it doesn't.
I also noticed that an exception is thrown if I try to collapse a 2nd level parent task. Here's the exception:
SEVERE: Server Exception during PPR, #1
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.dvt.model.binding.gantt.FacesGanttBinding$GanttModel.isContainer(FacesGanttBinding.java:588)
     at org.apache.myfaces.trinidad.model.RowKeySetTreeImpl._getSize(RowKeySetTreeImpl.java:395)
     at org.apache.myfaces.trinidad.model.RowKeySetTreeImpl._getSize(RowKeySetTreeImpl.java:411)
     at org.apache.myfaces.trinidad.model.RowKeySetTreeImpl._getSize(RowKeySetTreeImpl.java:411)
     at org.apache.myfaces.trinidad.model.RowKeySetTreeImpl.size(RowKeySetTreeImpl.java:286)
     at oracle.adfinternal.view.faces.bi.renderkit.gantt.RichGanttRenderer.processDisclosure(RichGanttRenderer.java:3844)
     at oracle.adfinternal.view.faces.bi.renderkit.gantt.RichProjectGanttRenderer.processDisclosure(RichProjectGanttRenderer.java:1175)
     at org.apache.myfaces.trinidad.event.RowDisclosureEvent.processListener(RowDisclosureEvent.java:62)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:684)
     at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:158)
     at org.apache.myfaces.trinidad.component.UIXTree.broadcast(UIXTree.java:231)
     at org.apache.myfaces.trinidad.component.UIXTreeTable.broadcast(UIXTreeTable.java:342)
     at oracle.adf.view.rich.component.rich.data.RichTreeTable.broadcast(RichTreeTable.java:249)
     at oracle.adfinternal.view.faces.bi.renderkit.gantt.GanttDataTreeTable.broadcast(GanttDataTreeTable.java:47)
     at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:153)
     at org.apache.myfaces.trinidad.component.UIXTree.broadcast(UIXTree.java:231)
     at org.apache.myfaces.trinidad.component.UIXTreeTable.broadcast(UIXTreeTable.java:342)
     at oracle.adf.view.rich.component.rich.data.RichTreeTable.broadcast(RichTreeTable.java:249)
     at oracle.adfinternal.view.faces.bi.renderkit.gantt.GanttDataTreeTable.broadcast(GanttDataTreeTable.java:47)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:754)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:282)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:175)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:181)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:279)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:239)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:196)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:139)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:102)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

File conversion for more than one level of substructure

I have the following file format that needs to be converted into XML, but because it has more than one level of substructure I'm not able to give the correct file conversion parameter
source file sample:
1headeryyyyyyyyyyyyy
2itemsyyyyyyyyyyyyyy
2itemsyyyyyyyyyyyyyy
2itemsyyyyyyyyyyyyyy
3trailer1yyyyyyyyyyyyy
4trailer2yyyyyyyyyyyyy
2itemsyyyyyyyyyyyyyy
2itemsyyyyyyyyyyyyyy
2itemsyyyyyyyyyyyyyy
3trailer1yyyyyyyyyyyyy
4trailer2yyyyyyyyyyyyy
Thus you see above that there is one header followed by a bundle that conrains many items and 2 trailers and this bundle can repeat any number of time.
Could anyone let me know how to parse this type of file to XML?
Thanks,
Lakshmi

Hi Lakshmi,
See this blog:
<a href="/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter:///people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
[]´s
Marcelo Macedo

More than one reference characteristics Exception Aggregation

Hi All,
Is it possible to use more than one reference characteristics in reports for Exception Aggregation?
Thanks In Advance

Hi PPMM,
Did you resolve this issue?
Thanks,
Pam

More than one fact tables...

Hi.
I have tried OLAP until now with only one fact table.
But now I have more than one. To start i added one more.
I am always using SOLVED LEVEL...LOWEST LEVEL.
I am always receiving the following error when creating the cube with this measures:
"exact fetch returns more than requested number of rows"
What shall I look for when dealing with more than one fact table?
Thanks.
ODDS
:: ... and still have a very poor performance ...

1.
Well ... I saw the global star schema and we have two fact tables there!!!
Do I have to build different cubes for each fact table always?
2.
I have built cubes, created a java client and a jsp client.
Performance is much better in JSP using the AppServer(sure!).
The power of the JSP client is more limited i presume.
I wonder if I can do things such setCellEditing for a crosstab in both.
3.
Some aggregation questions:
Everytime I create a cube using CWM2 and also a AW using AWM wizards with that cube I have one aggregation plan by default that processes everything online.
After that I create and deploy my own aggregation plan.
My question is: If I don't want to aggregate anything!??! I want to see, for instance, in BiBeans the lowest level values only. And everything at the top levels empty.
I am missing something 'cause I still have everything aggregated !!!
Thanks.
ODDS

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

Need help trying to have more than one delegate calendar display in iCal and on mobile devices

I have several calendars that are under my user name in Google. They all work as delegates and life is good.
I'm trying to set up the local school with a calendar for the sports schedule as well as a separate one for district events like school board meetings and would like to be able to add one for the holidays, exams and things of that nature. The sports calendar works but I can't figure out how to add the second caledar to iCal or my iPhone. It shows shared but doesn't appear as a possible delegate in iCal and will not load on the iPhone.
Google has the output to allow more than one calendar to display on a website but syncing at the level I want with the "i" apps isn't obvious.
Am I missing something? I really don't want one very cluttered master calendar for the school. Being able to turn on and off the various types of calendar will make it much easier to manage.

I have several calendars that are under my user name in Google. They all work as delegates and life is good.
I'm trying to set up the local school with a calendar for the sports schedule as well as a separate one for district events like school board meetings and would like to be able to add one for the holidays, exams and things of that nature. The sports calendar works but I can't figure out how to add the second caledar to iCal or my iPhone. It shows shared but doesn't appear as a possible delegate in iCal and will not load on the iPhone.
Google has the output to allow more than one calendar to display on a website but syncing at the level I want with the "i" apps isn't obvious.
Am I missing something? I really don't want one very cluttered master calendar for the school. Being able to turn on and off the various types of calendar will make it much easier to manage.

Nested If condition in Routine - Literals that take up more than one line

Hi All,
       I am writing following code at object level of routine but its giving following exception: Please help me on this.
Exception:
E:Literals that take up more than one line not permitted.
CODE:
IF SOURCE_FIELDS-/BIC/TOTAL >= 900.
    RESULT = 'A.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 800 AND SOURCE_FIELDS-/BIC/TOTAL < 900.
    RESULT = 'B.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 700 AND SOURCE_FIELDS-/BIC/TOTAL < 800.
    RESULT = 'C.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 600 AND SOURCE_FIELDS-/BIC/TOTAL < 700.
    RESULT = 'D'.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 500 AND SOURCE_FIELDS-/BIC/TOTAL < 600.
    RESULT = 'E'.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 400 AND SOURCE_FIELDS-/BIC/TOTAL < 500.
    RESULT = 'F.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 350 AND SOURCE_FIELDS-/BIC/TOTAL < 400.
    RESULT = 'G.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 300 AND SOURCE_FIELDS-/BIC/TOTAL < 350.
    RESULT = 'H.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 200 AND SOURCE_FIELDS-/BIC/TOTAL < 300.
    RESULT = 'I.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 0 AND SOURCE_FIELDS-/BIC/TOTAL < 200.
    RESULT = 'J.
ENDIF.
Thanks in advance.
Anitha.B

Hi Anitha
Just check
RESULT = 'A.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 800 AND SOURCE_FIELDS-/BIC/TOTAL < 900.
RESULT = 'B.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 700 AND SOURCE_FIELDS-/BIC/TOTAL < 800.
RESULT = 'C.
Whether it needs to be under two quotes. I feel one is missing. it should be 'A' and not just 'A.
Regards
Sriram

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Activate more than one Aggregation Level

Similar Messages

Maybe you are looking for