Activate New GL

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Please search before posting next time. >
Dear all,
Can anyone help me with the steps to activate the new GL in ECC 6.0 ?
Brgds,
Daniel

Hi Ravi,
All the table will be looking like display only.
For activating New GL, you go to select the t.code FAGL_ACTIVATION and activate it.
You can activate the new G/L by following the IMG menu path Financial Accounting>Financial Accounting Global Settings>Activate New General Ledger Accounting or by transaction code FAGL_ACTIVATION.
For your kind information, the GL activation will be actively in build by SAP new version.
Hope this will clear your problem.
Regards,
Mohan.

Similar Messages

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Activate new tab in Purchase requisition

Hello Folks,
I am trying add a new tab in purchase requisition on Screen exit MEREQ001. Can anybody tell me where I should go in SPRO and activate my tab?
Thanks in advance and reward point will be given.
ZC

Hi,
You cannot activate new tab through SPRO.
You have to goto CMOD > give some project name say <CREATE>, Give some description and press SAVE > select Enhancement assignment > give Enhancement "MEREQ001" and press SAVE .
Select Components, double click on Screen exit, it will prompt you to create screen 111. Then add required fields in screen.
Further you will need ABAPer.

To write&activate new Requirement for customr discount condition type k007

Hi Guru's,
how to write and activate new Requirement for customer discount condition type K007 in VOFM.
could please guide me step by step process or if you have any programming language related to this please provide me that would be helpfull to me...
please let me know if my question is not clear..
Thanks in advance and will give full points...
Srinivas.

Hi S,
u can use options condition value, condition based values for this requirement.
1.all Z requirements starts from 9xx onwards ,
2.u need to use Internal tables KOMP in that requirements based on the given conditions.
3. Dont active all , select only new requirement->Edit->Active.
ref any standard requirement for sample codes.
regards
Prabhu

I do not have a "Activate new device" option in the Sync menu on my desktop browser.

I do not have a "Activate new device" option in the Sync menu on my desktop browser.
How do I get it to appear?
When I go to Options - Sync - Manage Account I see:
View Quota
Change Password
My Sync Key
Reset Sync
Stop Using This Account

The "Add a device" link should appear right below the "Manage Account" button. If it is not there, make sure you have the latest version of the Firefox Sync add-on (or the latest version of Firefox 4 Beta).
Click on the image below for an illustration. For more details, see [[How do I add a device to Firefox Sync?]]

I am trying to activate new qualitative research software. When I attempt to activate it my Apple Air will not allow it and gives an error message saying we cannot verify the identity of the developer of the software

I am trying to activate new qualitative research software. When I attempt to activate it my Apple Air will not allow it and gives an error message saying we cannot verify the identity of the developer of the software

The developer isn't recognized by the App Store, so your Mac is trying to protect you in case the program is malware. As long as you are sure it isn't, follow this procedure:
In the Finder, locate the app you want to open.Don’t use Launchpad to do this. Launchpad doesn’t allow you to access the shortcut menu.
Press the Control key, then click the app icon.
Choose Open from the shortcut menu.
Click Open.The app is saved as an exception to your security settings, and you will be able to open it in the future by double-clicking it, just like any registered app.
OS X Mavericks: Open an app from an unidentified developer

Possible to activate new 3G iphone w/2 year w/out a internet plan?

Possible to activate new 3G iphone w/2 year w/out a internet plan? and add it later or vice versa, add it in the beginning and then take it off?

your contract requires you to have an internet plan that starts at $30/month for 2 yrs

Unable to activate new 5s

upgraded yesterday from 4s to 5s, but i am unable to activate new 5s, not possible via itunes, not possible via WIFI;
message from apple: server currently not available!
please help!!

Get help activating your iPhone
One thing not listed is trying from another location like your carrier's store or an Apple Store.
Edit: (Actually it is listed in those steps lol)

Unable to activate new phones

Hi Team,
We are unable to activate new phones, please check the screenshot below and advise.

A.o.A Waqas,
Contact Cisco TAC for this issue, they will guide you properly regarding this issue. As well check your cucm MAC address which you provided for generating this license.
Regards,
Humza Khan

HT5312 my last account activate free and when i activate it show my choose None Now this choose don't show to me when i activate new account in app store

my last account activate free and when i activate it show my choose None Now this choose don't show to me when i activate new account in app store
please support me and help
or back me last account
i'm create new account because i can't remember answer the question and when i'm create my old account in app store i don't write any rescues mail
please help me
send my link to rest my old account question and answer in my mail i use it for APPLE ID
really i need your support
help my Boss
to rest my question and answer because i can't use the app store in this time
you can help me iknow that please
<E-mails Edited by Host>

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email addresses from your post (it's not a good idea to post personal info on any public forum).
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in the country where you and your iTunes account are to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Unable to activate new phone on my prepaid account

I have a replacement phone to add to my existing prepaid account. I followed the directions via the phone number to activate it online. However, I get a message "My Verizon is temporarily unavailable as we work to improve our system to serve you better. We apologize, please try again later". I have been trying this for several hours. There was no Live help available for prepaid customers. So I contacted Live help via the sales page (knew they'd be there). They sent me to prepaid customer service (supposedly), but after waiting online for 5 minutes, I was informed by that rep that she could not access a prepaid account and gave me a second phone number to try. I asked if this would connect me with a person and she said yes. However, it sent me to an automated message that gave me 2 choices- go back to main menu or hang up! So, I dialed the 3rd phone number- provided in my phone's manual. Entered my current number, phone MEI & SIM numbers and it automated response says that it was sending me to a customer service rep- then I get a message that I was disconnected and needed to redial that number- which I didn't have! Worst most ineffective, fraudulent service I have ever encountered. I have funds sitting in my prepaid account being held by Verizon and cannot activate the new phone with my existing number. How do I activate this phone? If my only option is going to a service center- then Verizon should be telling existing customers that instead of deliberately giving out the wrong information.

It doesn't. I was able to load in phone information(MEI/ SIM) and the prompt said it was sending me to a customer service rep, but it disconnected and I only got a message saying to redial that number (that I was robo- forwarded to).
I have attempted online, live chat, called *611, *22898, 555-294-6804, 866-893-7723, and 877-777-5759. Nothing works. Will head to verizon center and have them clear phone so I can return. Will probably switch to a new carrier and another new phone.

Cannot Activate [New] Ipad - Ipad Not Detected on iTunes

I received my iPad through the mail, yesterday, and have been unable to use it due to it's inability to reach the activation server ('Could Not Activate iPad' error). I read via the forum that it could be related to a server overdrive, however, it is now 24 hrs later and I am still unable to activate it.
My WiFi Connect is perfect; all 3 bars. The iPad looks to have the new IOS 7.
I decided to go forth suggestion of activating the iPad via iTunes, so I downloaded it onto my laptop, following all of the reccommended steps. Nothing happened. I clicked Help>Run Diagnostics, everything is fine and dandy except for one test result stating 'No Ipad, Ipod, etc. Dectected'.
How am I to activate my iPad without the option of using WiFi, nor iTunes. Help!

Make sure that the version of iTunes on your laptop is iTunes 11.1 or later. If not update iTunes.
Try resetting the iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. Then try activating again.
Also check to make sure your Wi-Fi network router is not running a firewall. That might interfere with activation. Once your phone is up and working you can turn the firewall back on. Also turn off any virus protection software on your computer during the activation process.

How to activate New Correspondence Type

Hi,
I have created a new correspondence type in the following manner:
1)Define Correspondence Types
2)Create Report Variants for Correspondence
3) Assigned programs to correspondence types
4) Defined Forms for Correspondence Print.
I have posted a document through FB70.
When I go to FB03 and display the document so posted and select Environment and Correspondence I am unable to see the New Correspondence that I created.
Please let me know if I am missing any configuration.
Regards,
Raj/

There is requirement where in I need to generate an invoice through FB70 as we won't be using SD billing.
In this process I am trying to activate the Correspondence. I have a particular format of the invoice. These are the steps I followed.
1) IMG-Financial Accounting-****-Correspondence-Define Correspondence Types
Here I checked the the Doc.necessary option. Should I also select the Acct required?
Please let me know what other fields do I have to select here.
2) IMG-Financial Accounting-****-Correspondence-Create Report Variants for Correspondence Types
Not sure what Config needs to be done here.
3) IMG-Financial Accounting-****-Correspondence-Assign Programs for Correspondence Types.
I have assigned the Print Program name here.(Driver program as my Abaper calls it or is it different?)
4) IMG-Financial Accounting-****-Correspondence-SAPscript-Based Forms
I have assigned the Print Program name/Drive Program name and the Form to my company code.
After this I posted FB70 Invoice. Went to FB03 display and selected Correspondence from the Environment. But I cannot see the correspondence that I have created.
Please let me know what else needs to be done.
Immediate help is very much appreciated.

How to activate New Editor for XSLT Transformations?

Hello Everyone!
I am currentlyworking on some Simple Transformations (Txn STRANS). As I am very happy with the New Frontend Editor, I would like to use the new Editor for editing Simple Transformations, like I do, when editing usual ABAP Code.
Where can I activate the New Editor fpr XSLT Programs? I have already set the Flag to use the new editor when editing ABAP Code, but this Flag unfortunately has to influence on the editor used for XSLT programs... ;-(
Greetings
--MIKE

Hi all,
How to use conditions in XSLT Transformation,
Thanks
Reddy.n.l

I'm trying to sync my Android phone. The directions are: Firefox » Preferences » Sync » Activate New Device . I can't find "preferences" where is it?

I have FF4; I clicked on the FF menu, and there's no "preferences" Where is it?

Go to: Tools > Options
and you'll see the SYNC Tab there. Click on it and you'll see an option to activate a new device.

Activate New GL

Similar Messages

Maybe you are looking for