Activate open windows with mouse rollover?
Hello.
Is there a third party utility or OS X setting that allows an open window to be activated simply by hovering the mouse over it, rather than having to click on the window?
(There is something like this in the Windows world, called TXMouse, or True X Mouse.)
Thanks,
Avi
This happens quite a bit on the recently released beta's of Solaris Express and I would guess OpenSolaris as well. There was a thread on OpenSolaris.org that Jurgen Keil posted that disables some aspects of the CPU that on my system at least alleviated the issues.
I've not seen any reports on it from Solaris 10 so it might be unrelated. Which version of Solaris specifically are you using?
alan
Similar Messages
-
How to close open windows with ios7, How to close open windows with ios7
How to close open windows with ios7, How to close open windows with ios7?
Guess they thought we needed more exercise so now we have to swip them to close.....miss iOS6. My eyes are blurry now after looking at my phone, and my arms are tired from swipping lol
-
Fit the window with mouse doesn't work after new update 10.9.2
Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)
Doesn't anyone having this issue?
-
Opening windows with JavaScript
I am reasonably happy with my feedback screen, but after a
visitor sends a
message I would like to close it, and then pop up a smaller
"Thank you" window
for a few seconds.
After a lot of messing around, I have more or less got this
working (and have a
slightly better understanding of JavaScript), but have a
number of questions.
1. What is the difference between MM_openBrWindow() and
open.window()? They
appear to do the same thing, and to take the same parameters.
2. If I open the new feedback window, using either of the
above, and then use
open.window to open the Thank you window from the feedback
window, it appears to
use the same parameters as the previous window, regardless of
what I specify.
Is there a way around this?
3 The alternative to this would be to put code in the
originating window which
popped up the feedback window, and then popped up the Thank
you window when the
feedback window closed. Can I have the first window return a
result, and then
pass it on to the second window, and how would I access it in
the second window?
Clancy> This works with the local copy, but not with the remote
copy. I replaced
> the
> relative URL with the absolute URL, so that it opened
the remote copy,
> even if
> it had been loaded from my computer, and the local copy
still worked.
> However,
> when I modified index.php to open the remote copy of
Xcl_qry.php, the
> Thank you
> window did not open.
Make a simple test. You will find that either of these
methods works.
Something else is coloring your interpretation here.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Clancy" <[email protected]> wrote in message
news:[email protected]...
> "Murray *ACE*" <[email protected]>
wrote:
>
>>Show us the respective markup in either case, please.
>>
>>If you look at the OBW function, you'll see that it's
just calling the
>>window.open() function -
>>
>>function MM_openBrWindow(theURL,winName,features) {
//v2.0
>> window.open(theURL,winName,features);
>>}
>>
>>so you should get the same behavior with either.
>
> SHOULD being the operative word. As I have noted
elsewhere, I found the
> version
> which I thought I had working operates correctly if I
run the local copy,
> but
> not if I run the remote copy.
>
> The sequence of events is as follows.
>
> Index.php has a 'Comments' link, with the following
code:
>
> <img src="Images/Xclqry.jpg" alt="Comments and
queries" width="60"
> height="24"
>
border="0"onclick="MM_openBrWindow('Xcl_qry.php','Xclqrywindow','width=800,
> height=600,menubar=yes')" >
>
> This loads the feedback form Xcl_qry.php. This is based
on David's
> feedback
> form. When this is loaded it checks if data has been
entered. If so, it
> processes it and, if valid, tries to e-mail it. If this
is successful it
> should
> open the 'Thank you' window, and then close. The code
used for this is:
>
> <script
>
type="text/javascript">window.open('Thanks.php','Thankswindow','width=400,height=200');</ script>
>
> This works with the local copy, but not with the remote
copy. I replaced
> the
> relative URL with the absolute URL, so that it opened
the remote copy,
> even if
> it had been loaded from my computer, and the local copy
still worked.
> However,
> when I modified index.php to open the remote copy of
Xcl_qry.php, the
> Thank you
> window did not open.
>
> I then modified the open commands to ask for a menu bar,
so that I could
> examine
> the code actually loaded to my PC (on the last pass),
and altered
> Xcl_qry.php so
> that it remained open. I then ran each version, and
saved the code. When
> I
> compare the two versions they were identical, except
that the remote
> version had
> an additional line on the end:
>
> <script
language='javascript'>postamble();</script>
>
> I put this on to the local copy, so the two files as
loaded were
> identical, but
> this made no difference.
>
> So the current state of play is that the local copy of
Xcl_qry.php will
> open
> either the local or remote copy of Thanks.php, but the
remote copy of
> Xcl_qry.php will not open the remote copy of Thanks.php,
even though the
> code
> actually loaded onto my PC is identical. I have not
checked if it will
> open the
> local copy as this does not seem very relevant.
>
>
http://www.corybas.com/
> Clancy -
Gedit opens an "Unsaved document" on opening files with mouse
when I open files by double-clicking the file with mouse I always get one additional "Unsaved Document X".. which is very annoying, because I have to close tham all, and click "Close without save"... it happens in dolphin, nautilus and krusader.
when I try opening a file from terminal using "gedit filename" that does not happen.
it also does not happen if I open the files from within gedit.
any hints on how to fix this?
thank you
Last edited by pootzko (2011-06-05 12:29:51)pootzko wrote:
felrood wrote:
It's not a bug, it's a feature!
Gedit seems to display data from stdin in a new "Unsaved document". For example:
echo "foobar" | gedit
To break the pipe opened by krusader, i replaced the command 'gedit %U' in krusader with this script:
#!/bin/bash
gedit $1 < /dev/null
man, you're a genius. thank you so much! :)
ps. perhaps a more global solution is right clicking Kmenu button -> edit applications -> find gedit there -> put "gedit $1 < /dev/null" in gedits command field -> save
That's an amazing solution!
Maybe better would be...
gedit "$1" < /dev/null
(with the quotes). That way we prevent gedit to open two files with each non-spaced name in the case that our file name had blank spaces.
(gedit foo bar -->one file for 'foo' && one file for 'bar')
Thank you,
DaviD.
Last edited by DjDaviD (2012-02-28 23:38:03) -
Firefox opens window with tabs leading to garbled links
Almost every time I go to a site, firefox opens a new window with numerous tabs trying to access garbled links. The first tab looks like this: http://i56.tinypic.com/2nkuo9k.jpg.
Anti-virus programs found nothing, and re-installing firefox didn't fix it.Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
See also:
*http://kb.mozillazine.org/Resetting_preferences -
HT6114 unable to open windows with bootcamp
I have been using windows 7 in boot camp since two days I am trying to open windows but unable to open in windows.
How is Windows installed?
If you installed Windows using Boot Camp Assistant you don't "open" Windows you boot into Windows.
If ypou installed Windows in a virtual machine you must start the virtual machine before turning on Windows from within the virtual machine. -
Hi, this was one very handy feature which I can not find now in Lion and kinda frustraits me. When I wanted to go strait to a clear desktop to open a folder, while being on another window, I had to swipe three fingers up (I think). Now trying swipe up, down, whatever, I got different showing of all opened windows, the one which says desktop though when clicking on it, brings the current window. Is it me or Lion is missing that? thanx
Hello,
Apple employees do not read very often the messages here.
The only (and official) way is to send a suggestion via this page :
http://www.apple.com/feedback/macosx.html -
Is it possible to open window with FPM embedded multiple times in a dialog?
Hi,
Is it possible to open a web dynpro window whose view embeds the FPM_GAF_COMPONENTu2019s FPM_WINDOW multiple times in dialog window?
I have a web dynpro component WDC1 which use FPM_GAF_COMPONENT and provide the component configuration for FPM.
Thereu2019s a WINDOW1 (with View1) in WDC1 which has a view container and the FPM_GAF_COMPONENTu2019s FPM_WINDOW is embedded.
I have a button in WDC1 which create a new dialog window by calling if_wd_window_manager->CREATE_WINDOW as code below.
lo_window = lo_window_manager->CREATE_WINDOW(
MODAL = ABAP_TRUE
WINDOW_NAME = 'WINDOW1'
TITLE = 'Test opening FPM multiple times'
CLOSE_BUTTON = ABAP_TRUE
* BUTTON_KIND =
* MESSAGE_TYPE = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
* CLOSE_IN_ANY_CASE = ABAP_TRUE
* MESSAGE_DISPLAY_MODE =
* DEFAULT_BUTTON =
IS_RESIZABLE = ABAP_TRUE
It works for the first time when I click the button, a dialog window opens with my FPM GAF stuff.
But when I click the button the second time after closing the dialog window, it generates a dump with error message saying u201CComponent Usage Group MESSAGE_AREA_USAGES Already Existsu201D.
In ST22, the dump was generated in WDDOINIT of view u201CMAINu201D on FPM_GAF_COMPONENT which looks to me like the message manager is already created in the first time.
lr_component = wd_comp_controller->wd_get_api( ).
lr_usage_group = lr_component->create_cmp_usage_group(
name = 'MESSAGE_AREA_USAGES'
used_component = 'FPM_MESSAGE_MANAGER' ).
wd_this->mo_message_area_usage = lr_usage_group->add_component_usage( 'MESSAGE_AREA_USAGE' ).
wd_this->mo_message_area_usage->create_component( 'FPM_MESSAGE_MANAGER' ).
I tried to remove the component usage of FPM in my WDC1 or delete the component directly, hoping that this will clear the memory , but doesnu2019t work, only bring more different dumps which make this look like a wrong direction as I am interfering the lifecycle of FPM itself.
Can anyone share some ideas here? Thanks in advance.
Best regards,
Beiyang
P.S. The FPM GAF works fine when I open the window in new browser (by calling if_wd_window_manager->create_external_window).Hi ,
Currently I am facing same problem could you please let me know how you resolved your issue.
Thanks in advance. -
Opening window with display_items
Hi,
I need to show some messages (validation errors) on the press of a button. For this, i have created a document window and a content canvas containing only 1 display item. Before opening the window, i populate the display item with the message i want to display.
But the window dosent open when i press the button.
The code in the WHEN-BUTTON-PRESSED trigger is
:CONTROL.SKETCH_VAL_MSG := l_message ; APP_CUSTOM.OPEN_WINDOW('SKETCH_VAL');
I think that we should move the focus to some item on the canvas. But in this case the only item is a display item and i cannot use go_item(). Is there any workaround for this? Is this approach correct?
Please suggest
Thanks,
AshishHi,
Thanks for your prompt reply. I tried to create a dummy text item and shift the focus to it, but dosent work.
So, changed the display_item to multi-line text_item with insert,update, and query property set to No.
Thanks for all your help!
Ashish -
I have been using firefox for a while. I usually work on a number of windows (sometimes up to 8) with 8 - 10 tags in each. I was using a trial version of Nero and was triggered for an upgrade which i stopped half way through. I dont know if this has caused this problem. Now I cannot open any link in a new window. It will only open in a new tag of the same window.
== This happened ==
Not sure how often
== when i stopped an upgrade from Nero-> IF you use Privacy Cleanup softwares like CCleaner, DON'T SELECT FIREFOX IN ITS SETTINGS. These softwares can be responsible for Deleting your Firefox Settings.
Perform the suggestions mentioned in the following articles:
* Make sure you are using the '''"Remember History"''' setting as described in this article -> [[Settings for privacy, browsing history and do-not-track]]
* [[Restore previous session - Configure when Firefox shows your most recent tabs and windows]]
Check and tell if its working. -
X11 is opening windows with the title bar under the menu bar
Hi, I've just upgraded to Leopard and I use X11 at work to log into a Sun and run Cadence. Some of the windows open with their title bar under the menu bar at the top of the screen making it impossible to move or resize the windows. Is there a way to make it open the windows slightly farther down or is this a bug in X11 that will be fixed soon? Previously with Tiger, I never had this problem.
Great I switched to it shortly after upgrading to 10.5 and as far as what to stick with, i'm not quite sure, but my understanding it's the same open source stuff apple uses and I believe some of the fixes are intended to be used in the future updates, but maybe the xquartz site could fill you in a bit more.
-
Prevent user to open window with same session
Hi all,
I have a requirement to prevent user from opening a new window of same session, either by right click, middle click or any other method.
Can anyone tell me how can i use session state to find that new window of same session is opened, and if yes, i can give an alert message that 'Only one window is allowed at a atime for a user'. Thanks alot.
With Regards,
Sunil Bhatia
Oracle APEXYou can enable the checksum feature in the Application Security attributes to prevent users.That would be closest you can acheive towards your requirement.
<li>However you try and prevent users from creating a new page, they can always use their browser features to duplicate a page ,and this works even with a checksum in the URL
For example in firefox, place your cursor in the URL bar and press {CTRL} + {ENTER} , it duplicates a page.
<li>Now, assuming that they did this, how do you identify which page is valid, For apex either page sents a request only and it doesn't know what happens at the client side. Remember apex session details are stored at the server side only. -
Good Morning All,
I am trying to open use a button in captivate to launch
another .swf movie and am having no luck. I have reviewed all of
the posts here in the forums, but I still cannot seem to get it to
work. So, I apologize for posting this again!
Here's and overview:
I am creating a several Captivate projects that will be
hosted online. I am publishing to Flash. One project provides an
overview and serves as a "launching" point for the other projects.
So, I want to be able to open a new, "chromeless" browser
window set to the specific size for the project when I click a
button that will open another project which I have published to
Flash.
Any help would be greatly appreciated!
AaronThanks for your help Frank. I can get the window to pop-up
can open the other file, but there is just one snag. When I click
on the link, the original window goes blank and I would like it to
keep the stay at the point in the presentation where the user left.
Is there any way to keep the original project from going
blank? (The Flash file disappears and [OBJECT] appears on the blank
browser window.) -
PLease Help !Jsp Session expired when open Window with "_blank" atributte
PLease please Help me!
Hi ,
I have a problem
First , all my pages when load evaluate if session exists .
If not exists session
this page redirect other page (page_expired.jsp)
this works correctly ... but
when page01.jsp open page02.jsp from :
<form action='page02.jsp' target ="_self"> - >works correctly (load on the same page ..)
but when :
<form action='page02.jsp' target ="_blank"> -> this redirect page_expired.jsp
why this ??
Sometimes work and Sometimes not work...
but now it does not work
Excuse my english not is goog...
Greetings From Lima - PeruHi
This problem ocurred when testing on my server of testing(this is in my office) ,
but when test in the server machine of my house this work!!! great! ,
not appear session expired.!!
this theme of configuration ??
if is ths ?
what configure ?
Please Help Me .
I am using EASERVER 5.2 with JSP
Bye! Greetings From Lima Per�
Maybe you are looking for
-
Printing Password NO LONGER WORKS with Snow Leopard!
Ive searched this forum and most people have the opposite problem I do. They want to disable password requests when printing, but I want them! With Leopard, I was able to set up our networked color printer on every mac and students who logged in with
-
How to modified the current file?
Hi, excuse for my english, I'm developing a plug-in with SDK 9, How can I do for modified the file opened with Acrobat Reader ? thanks
-
Can you run both Premium and Enhanced agents on the same UCCX system?
Just that. Thanks, Steven
-
[SOLVED]How do you mark post as being solved
I am trying to follow the link https://wiki.archlinux.org/index.php/Forum_Etiquette But I am unable to mark a post that I made as SOLVED.(aka the title) Any inputs on this is appreciated. Regards, -Narahari Last edited by savithari (2013-03-15 13:37:
-
Hi all, If I run catalog.sql and catproc.sql in a production database (when application is not accessing db), they will recreate data dictionary, views and recompile packages. But, wiil my data be affected by this? Regards, Saikat