Activate PSCD using SFW5 not work

Hi all,
I am on SAP IDES 6.0, SR2.
I follow the note 874414 to activate PSCD.
However, I see that Public Service is already on.
But I do not see the menu for PSCD as in the help.
For example tcode PSOBWORK (Edit contract object) does not work (system says it's not yet activated).
Please tell how to activate PSCD.
Giang

Did you ever deployed this EJB from weblogic console?
Thanks,
Rahul
"Chris" <[email protected]> wrote:
Hi, all
I am using WLS 7.0 ,there are some ejb-jar files in a application
directory:
user_projects\mydomain\application
when I put new ejb-jar files to overwrite the old ones, it seemed that
WLS
still using the old ones, though WLS said "ejb activate complete".
then I delete some temp files . restart the server, it still does not
work
out .
I am sure that I'v set the ProductionModeEnalbed=false.
and at another machine with the same envirenment , it is all OK.
What I$B!!(Bwant to know is where WLS 7 put the jar files , or .class
file that
it
is really and corrently using. Could some one help me ?
Thanks in advance.

Similar Messages

I tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?

i tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?

You will need to restore the software via the following procedure:
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.

Change password on the first use - does not work

Change password on the first use - does not work.
Created a user and specified 'Change password on the first use' - when user logs in - the 'Change password' window does not pop- up.
Please advise.

(APEX 4.0.2) I am running into this same issue - if you don't set the password expiration and locking to 'Yes', the user gets into the app without being asked to change the pw.
When you do set expiration and locking - after the user logs on with their temporary password, it does take them to the change password page (4155:50) but the username is blank. Because the username didn't get to the page the old password will never match and you get the "Invalid password" message.
What am I missing? Anyone successful doing this?
Simple application, default authentication, no javascript, HTTP_SERVER, no ssl.
Thanks,
Steve

IPad connected to TV using dim not working with iOS 7.0.2

Since updating my iPad to iOS 7.0.2, connecting my iPad 4 using hdmi to my tv is not working.
In fact, when connected, everything on my iPad is in slow motion. The iPad moves in slow motion. And there is no image being mirrored on the tv. This use to work fine before the update. Any ideas?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Report using charts not work on non-development machine

Post Author: ftsoft
CA Forum: .NET
using visual studio report uses charts. works fine on development machine when I move the web app to a test machine which does NOT contain visual studio, the chart report does not worknote: other reports which only display data records work fine. the space where the charts should be displayed contain the following two lines CrystalReportViewer - CrystalReportViewer1 Error: Fail to render the page. any help would be appreciated

Solution suggested worked for me.
On my test server Crystal was trying to use the c:\temp directory to write the temporary images, my report always ran ok on the test server. On the live server CRW was running under with the ASPNET account and / or my own user account.
I ran FileMon and filtered on the aspnet_wp.exe process across both servers and ran the application up to the point of generating the issue. The FileMon output from the test server showed no issues we as the output from FileMon off the live server showed an access denied message.
I gave access right to the relevant accounts on the relevant folders on the live server and the report ran fine.

Resizing image using CSS - not working in IE

Hello,
I have a standard report with couple of columns one of which a image column. The images are of varying sizes and I manged to resize them to a fixed width & height by using CSS code in page header as below:
td[headers="ITEM_PICTURE"] img {
display: block;
width: 70px;
border: 1px solid #999;
padding: 4px;
background: #f6f6f6;
}The CSS does the trick in Chrome & Firefox but does not work in internet explorer. Is there a way to make this CSS code IE friendly?
Cheers for help.

William Wallace wrote:
I am using Apex 4.2.1 (had this issue in 4.1.1 as well) and using theme 10.Ah, the Sludge Sand theme. In 4.x that's a legacy theme only really included to allow applications to run on IE6. It's therefore intended to run in quirks mode, meaning in Internet Explorer terms there's no support for anything that didn't work in IE6 (for certain values of "work"). This means no CSS3, no support for a lot of useful CSS2.1 stuff (like attribute selectors), and probably problems with jQuery which requires standards mode. Adding a DOCTYPE to the page templates to trigger standards mode Interactive Report: how can I display carriage returns?. In 4.2 you really should switch to one of the latest Standard themes, or at least one of the standards mode Legacy themes (those not marked with a "*").
If you must use theme 10, and there are no other images in this report (like edit icons) then you could add a static ID to the region and use a more basic selector like:
#static-id td.t10data img {
display: block;
width: 70px;
border: 1px solid #999;
padding: 4px;
background: #f6f6f6;
}However, it appears that one of IE's quirkier quirks mode quirks is that CSS padding is not supported on images, so the presentation you want is not possible using theme 10 in IE and CSS alone.
Switching to a modern theme is recommended.
Edited by: fac586 on 02-Mar-2013 10:31

Dynamic resizing in JDialog using setSize not working properly on solaris

can anyone help..
Dynamic resizing in JDialog using setSize is not working properly on solaris, its work fine on windows.
i have set Jdialog size to setSize(768,364),
when i dynamically resizing it to setSize(768,575); it doesn't get change but when i move dialog using mouse it gets refreshed.
this problem is only happening on solaris not on windows.

Hi,
It's only an approach but try a call of validate() or repaint() after re-setting the size of your dialog.
Cheers, Mathias

Problem with GenericCatalogDAO JDBC Resultset using parameters not working

Hello
I have a problem with Petstore GenericCatalogDAO. java. The problem is the behaviour of the resultset object when retrieving data from the database.Below are two synareos one that
works (when) hard coded and one that does not work when parameter values passed into the the result set.
1. The code the WORKS.
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale= 'en_US' and a.catid = 'FISH' order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
The code that gives me a 'exhausted resultset' error which I think means no results
String[] parameterValues = new String[] { locale.toString(), categoryID };(For example parameters are 'en_US' and 'FISH')
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale=? and a.catid =? order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
for (int i = 0; i < parameterValues.length; i++) {
statement.setString(i + 1, parameterValues[i]);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
There is obviously a problem using these named parametevalues with these preparedstatement resultset, Does anybody know anything about this and a fix for it????
Cheers. Roger

Which version of PetStore are you using?
-Larry

Change Password on first use does not work properly.

I have created apex application user in Oracle Apex 3.2 as follows
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99');
END;
As in the documentation
p_change_password_on_first_use IN VARCHAR2 DEFAULT 'Y',
User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99',
p_change_password_on_first_use =>'Y');
END;
Still does not work. How can I ensure user to change password on first login.
Hasan Al Mamun
Programmer
Bangladesh Bank
Dhaka, Bangladesh

Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
** NOT TESTED **
declare
v_first VARCHAR2(10;
v_session NUMBER;
begin
v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
if v_first = 'Y' then
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
else
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
EXCEPTION WHEN OTHERS THEN
*** handled **
end;
The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
Not sure if it meets your setup.
Ricker

Total using SUM not working on Account field on Lead History report

Hi,
I have a report based on Lead History on which I need to use the SUM of a field that is under the Account.Custom Number/Integer. This basically is a report of leads along with some fields from the account the lead is associated with. The SUM on that field works fine when I try it on another report off the Account History object but does not work when used on the report off the Lead History. It just shows the value of the field for that record instead of the total of the field for all the records displayed on the report. I am guessing that the issue has to do with the query going off the Lead-Account relationship because of which it treats each relationship as one resultset and totals the field values for just that relationship.
Any ideas on how to accomplish this would help very much. Can a field on one report be referred from another to achieve this?
Thanks in advance for your help!
Regards,
Madhukar

Hi again
Just checked a similar report test I did a while ago, and my query is:
SELECT c001 MyText, TO_NUMBER(c002) MyNumber
FROM HTMLDB_COLLECTIONS
WHERE COLLECTION_NAME = 'ATD'
So, you should use TO_NUMBER(c002)
Andy

Using REG_EXTRACT not working

Hi All, I am having a flag column having data like FLAG : |Y|Y|Y|Y| ,|Y|N|N|N| like wise all kind of possible combinations Now i have to extract the character between two pipe lines and populate opposite of it , if Y---N and if N---Y . So i though of using REG_EXTRACT function but its working only for first occurance of Y . IIF((REG_EXTRACT(FLAG,'^.*([A-Z]).*$',1)='Y'),'N','Y') ----- working IIF((REG_EXTRACT(FLAG,'^.*([A-Z]).*$',2)='Y'),'N','Y') ------ not working can some one suggest gow can i acheive this as i have to populate four columns based on 1 column flag and the character between delimiters . Note : Only Y and N are the alphabets in Flag column

Hi There is windows batch script which uses local variable %DATE% Date format behaves differently across environment In Preproduction : Powercenter9.5.1hotfix2 Windows NT 2008 date format for all users in server machine dd/mm/yyyy (checked regedit/allusers/default/international) Integration service data format day dd/mm/yyyy environment variable INFATOOL_DATEFORMAT is not set The format of this variable is dd/mm/yyyy when batch file is run directly. The format of this variable is dd/mm/yyyy when batch file is run from Informatica. Production : Powercenter9.6 Windows NT 2012 date format for all users in server machinedd/mm/yyyy Integration service data format day dd/mm/yyyy environment variable INFATOOL_DATEFORMAT is not set The format of this variable is dd/mm/yyyy when batch file is run directly. The format of this variable is day dd/mm/yyyy when batch file is run from Informatica. If environment variable INFATOOL_DATEFORMAT is set in production,even then date format is not set to dd/mm/yyyy Where could the issue be? Thanks Kani

OS10 Hub - Conversation Display - Grouping emails using title not working

Hello,
One great feature of former blackberry and Outlook is the ability of sorting email together if they are relating the same discussion.
Their is an option for this in my Z10, but it doesn't work well at all. I had a discussion with someone using emails and we exchanged pictures and this kind of thing. The hub groups sometimes two messages together but that's it. There is no reliability or repeatability. And when I deactivate the function it is even worse as the few which were grouped together starts to be as unique entry (which is the expected behaviour under such settings).
Is the "Conversation" Display style working well on your handset ? This is pretty basic thing and my old BB 9800 used to do it properlly...
Thanks for your feedback.

I have the same problem as you..
It would be great to imporve this . For now grouping option is not working.

Redirection using header not working..

Hi,
I've created a simple insert page and after insert i want it
to be redirected to another page which has list of entries.
Somehow the header redirection is not working. I tried site
relative name in the after insert go to option and then gave tried
the full path name but no relief. I tried the redirect at the top
of the page(plain redirection as soon as the page is loaded) and it
worked. I have attached the code. Can some one spot what am i
missing here?

The page is not redirected it stays in the same page after
the insert action.
the page is in the location <<
http://localhost/mysite/create_blog_entry.php?>>
after the submit form it should be redirected to the <<
http://localhost/mysite/blog_view.php>>--expected
result
but the result is
<<
http://localhost/mysite/create_blog_entry.php?>>
I tried the exit function after the header and i got
connection reset error..
<<The connection to the server was reset while the page
was loading.>>

Application Exception using @Application not working

I'm trying to create 2 business application exception using the @Application annotation on my 2 java exception class. The first exception is a StarException class that extends java.lang.Exception (per ejb 3.0 spec). Below is snippet of the class.
@ApplicationException(rollback=true)
public class StarException extends Exception {...}.
As you can tell that this is a check exception and will rollback transaction when it occurred. I have another exception class called StarRuntimeException that extends java.lang.RuntimeException. This is also mention on ejb 3.0 spec and is useful if you don't want to catch the exception on the server side and just throw it and the client will receive such application exception class. Below is a snippet of the class ...
@ApplicationException(rollback=false)
public class StarRuntimeException extends RuntimeException {...}.
By the way I'm using this exception in my wls 10.3 webservices stateless beans (jax-rpc 1.1). Some of the methods throws these 2 exceptions.
There are 2 problems with this application exception during runtime on the client side.
1. Regarding StarException, the client can catch this exception when the webservice method throws this exception. The problem is that the error messages is null. Tried both getMesssage() and getLocalizedMessage() are all null.
2. Regarding StarRuntimeException, the generated client stubs and artifacts does not even throw this exception, therefore it will not the caught. This exception is wrapped inside RemoteException instead.
Your help are needed. Thanks

Ok. I figured it out. The url rewrite was missing in the config. Put it there and its working now.

Why is creation of a service notification using BAPI not working?

I need to create a service notification.
I have found 2 BAPIs.
BAPI_SERVICENOTIFICAT_CREATE
BAPI_SERVNOT_CREATE
The code below using the second BAPI is not creating a notification and the return parm does not have any errors.
You can see it does a call to commit after the BAPI call
Perhaps I am missing something critical in the parms.
We are trying to creat a service type notification using equipment.
DATA ls_notif_h TYPE bapi2080_nothdri.
data ls_notif_e type BAPI2080_NOTHDRE.
DATA lt_return TYPE STANDARD TABLE OF bapiret2.
DATA ls_return LIKE LINE OF lt_return.
ls_notif_h-equipment = '10000044'.
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
EXTERNAL_NUMBER          =
    notif_type               = 'S3'
    notifheader              = ls_notif_h
TASK_DETERMINATION       = ' '
SENDER                   =
ORDERID                  =
IMPORTING
    NOTIFHEADER_EXPORT       = ls_notif_e
TABLES
NOTITEM                  =
NOTIFCAUS                =
NOTIFACTV                =
NOTIFTASK                =
NOTIFPARTNR              =
LONGTEXTS                =
KEY_RELATIONSHIPS        =
    return                   = lt_return
IF lt_return IS INITIAL.
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO   ls_return.
    WRITE:/ 'errors'.
   ls_return.
ENDLOOP.
Thanks.
Scott

Try this way
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
* EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
* TASK_DETERMINATION = ' '
* SENDER =
* ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
* NOTITEM =
* NOTIFCAUS =
* NOTIFACTV =
* NOTIFTASK =
* NOTIFPARTNR =
* LONGTEXTS =
* KEY_RELATIONSHIPS =
return = lt_return
* IF lt_return IS INITIAL.                                               " <<< Comment this lie
read table lt_return into ls_return with key type = 'E'. " << Change
if sy-subrc ne 0.                                                             " << Change
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
* ls_return.
ENDLOOP.
endif.
a®

Activate PSCD using SFW5 not work

Similar Messages

Maybe you are looking for