Activate Rebates for Old Sales orders created
Hi SAP Gurus,
How to activate rebate agreement or rebate condition records to old sales orders which has been created at past ?
let me take an example and explain:
1. Total sales cycle is created (Sales Order, Delivery & Billing with Accounting document) is created on 06.06.2014 and rebate agreement is created on 26.06.2014.
Now my client is asking to link the rebate agreement which is created on 26.06.2014 to the Sales Cycle which is created and completed on 06.06.2014.
Balajia
Hi Balajia
The rebate process supports retroactive processing.
If you have activeate the new rebate procedure (via S136) you can run VBOF and as long as the
validity of the agreement and the agreement conditions cover this document created before the agreement the rebate condition will be inserted in the billing document and posted to FI.
If you do not have the new rebate procedure activated it is not possible to update the old document
but if it falls within the validity of the agreement it wil be included in the final settlement of the agreement carried out via VBOX.
Notes 75778 and 105681 in addition to 410579 should help you clarify the issue.
Hope it helps
Kind regards
brian
Similar Messages
-
Credit management for Old sales orders
Hi experts,
pls consider the follwing example where i am facing some problem.
I activated the Credit lock system in Sales order level (Warning message with release strategy)and in PGI. (Warning message with release strategy).
Customer A
C.limit : 10000
Outstanding : 7000
Sales value(Without pending sales order value): 2000
Eli gable new sales order value 1000
Pending sales order value 5000(Sales order no 111)
Now if i process this old SO no 111 in VL01N i am getting error that Order blocked due to credit limit. But i activated dynamic credit control only in sales order and in PGI.Not activated in VL01N level.
Awaiting for your valuable reply.
Thanks
SRHi
1.KIndly check in the sales order that you have maintain the payment guarentee procedure because of this the system is not allowing to do the delivery
PATH: VA02sales order no-Go toItembilling document---payment guarentee procedure
so kindly check that and remove or assign the financial document to that for processing the billing
2.Check the credit lock procedure is release or not
By doing above the issue will be resolved,kindly check and confirm.
if you have any further clarifications let me know
REgards
Damu
KIndly check the belwo -
How to create an Invoice for the sales order using the T-Code VF01
Hello Experts,
How to create an Invoice for a sales order using the T-Code VF01?
Thanks in advace,
Sumahi,
Make the following settings-
1. Create sales document and billing type
2. assign billing type in sales document type config VOV8
3. Activate itemcategory as sales order related billing
4. Maintain copy control header and item level between sales order and billing
5. Maintain pricing procedure for sales order and billing
6. Define Output procedure in case to print invoice
Regards
Goutham -
How to create a single delivery for two sales orders?
Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incoterms.? different dates
Kindly help regarding this.
Thanks
RaghuPrerequisite for Grouped delivery
1. Header data should be same like Inco terms,Payment terms
Go to VL10A
Enter the sales order Numbers and execute
Select the sales order Nos for the group delivery and select "Background" Tab in Tool Menu Bar
If delivery is created coloured line items will get generated
Check the log for delivery docuements
Check and confirm
Senthils -
Auto-create delivery for multiple sales orders
I would like to ask how to create auto-create 'single' delivery
for multiple sales order during release sales order in R11i.
It is found in my example during release sales order, multiple
sales orders fulfill release sales order criteria, a single pick
slip is generated but it is found that each sales order have
individual delivery with it. It will casue multiple pack slips
for a singles pick slip. Is it normal feature for auto-create
delivery, or any setup to solve it?
Thanks in advance.Am not able to do Single Delivery for Muktiple sales orders
Have you searched the forum for this question as to why you were not able to generate ?? It could be due to multiple reasons. Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
thanks
G. Lakshmipathi -
How to create one delivery for two sales orders?
Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incorterms.? different dates
Kindly help regarding this.
Thanks
RaghuHi
To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
Finally See Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
Regards
Eduardo -
How to create one delivery for multiple sales order
Hi!! Friends,
Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
Regards
AKASH
Message was edited by:
AKASH TAMBIHi.,
You can combine different orders in to one delivery ,But for the customer Order combination should be checked in the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
REWARD if helpfull
Thanks & Regards
Narayana -
Create ecatt script for one sales order creation with multiple line items
Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
TaranumHi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh -
Required item no: to populate custom field while creating item for a Sales order
Hello Experts,
I have created a custom field for item data of sales order using AET .
I want to populate this field automatically when ever we create a new item for a sales order using UI or CRMD_ORDER or WCEM by concatenation Sales order number and item number.
We are getting Item GUID but not getting the item number(need item number before getting saved is their any chance to get item number from item GUID ) to populate the field and save it.
For this we tried using BADI's
CRM_BTX_EXTENSIONS
CRM_ORDERADM_I_BADI
Thanks in advance,
Manasa Veena P.Where did you add the field ?
-
Need code for sales order create report using bapi's
need code for sales order create report using bapi's
Hi,
Go through below link
http://www.saptechies.com/bapi_salesorder_createfromdat2/
<b>Reward points if it helps,</b>
Satish -
Throw Information message for sale order created with value less that 5$
Hi all,
I am basically an abaper, I have got a requirement in SD. The requirement is any sales order created with value less that 5$, should be prompted with an error message saying the minimum order value should be more than 5$. Could any one help me on this.
Thanks in advance,
shivuserexit_save_document_prepare,main program - sapmv45a, issue an error message if your document value is less than 5$ (VBAK-NETWR) but check if your order has any non-rejected item, I would not issue this message if all items are rejected:
loop at xvbap where updkz ne 'D' and abgru = ' '.
exit.
endloop.
if sy-subrc = 0. "-you have at least one non-rejected, non-deleted item.
NOTE: sapmv45a works NOT only for orders, so please check document types in your logic which are relevant to your messge only (VBAK-VBTYP and/or VBAK-AUART). -
Create 2 different delivery types for one sales order
Hi,
When sales agent is placing sales order at customer site, customer declares as well products or returned packages he would like to return. our business need is to combine all items (return products, return packages and ordered items) into one sales order.
However, we would like to split the sales order into 2 different delivery types. Sales order customizing dictates only one default delivery type per order.
We can set up split criteria via copy control according to item category, but how can we intervene during creation of deliveries and set up a rule to determine different delivery type then default for return items ?
Thanks,
Assaf tzurDear Assaf,
Through copy control settings you can create two delivery types for single sales order but you have to select the delivery type manually while creating delivery.
If you want automatic process then you need go for some Zdevelopment with the help of ABAPer.
I hope this will help you,
Regard,
Murali. -
Creating new sale order with reference of old sale order.
Dear gurus
i have requirement
i want to make a sale order with reference of old sale order.
how to achieve it?
Regards
Saad NisarHi,
In vtaa
give source and document number and assign all the relevant routines.
Now on the left hand side, click the Item button and then give the source I.C as TAC and target also as TAC adn then fill the routines.
Do the same for Schedule line (which is related to TAC)
If this is done, then ur scenario will work -
Create directly an IDOC for a sales orders
HI,
I would like to know if it exists a program to create an output IDOC for a sales order directly as does the program
RBDSEMAT for materail / product.
With RBDSEMAT we give the product's numeber the message type and the logical system.
Of course before was customizing all the ALE flow.
But for sales orders (VA02 / VA01) I don't find any program which allow us to have the same function.
Does this program / function exist? I want juste to give the sales order number the logical system and the message type.
Thanks you
HenriFuntion Module IDOC_OUTPUT_ORDRSP is used by standard SAP when output determination is used. I think you can populate the control record and use this function module directly. This will return the IDoc data, but the IDoc will not exist on the Database.
-
Creating multiple partner function for a sale order @ header level
Hi All,
I have a requirement where in i have to create more than one partner funtion for a sale order @ header level. But the system did not allow this sort of scenario and i got the error,
Partner function ZZ can only occur 1 times in procedure TA (Sales Document Header)
the function module that was giving this error was SD_PCHECK_PARVW_COUNT_OK
here the function module checks if a partner function already exists if so it throws that error. This also updates the VBPA table where partner function is one of the key fields.
Our issue is that we have to allow the system to enable posting 2 or more partner function for the same sale order. It was also verified that the unique key was unchecked during configuration.
is there any other way of over coming this issue as we are updating the standard table. Is it possible??
Thanks a lot in advance for your reply....I believe this is a configuration setting, based upon the details of your post. Typically, a sales order can have multiple partner functions, but usually the partner type is not duplicated at a single level (header or one item). For example, it would not be logical to have multiple ship-to partners at the header level...these would be unique at the item level, if required.
Speak to your SD functional specialist about the configuration controls for partners, if you must have more than one partner with parvw = ZZ, for the entire order (header level).
Edited by: DaveL on Aug 23, 2011 3:00 PM
Maybe you are looking for
-
Can we toggle the display of Key/Text in Webi prompt?
Gurus, We have a BOBJ 4.0 and BW 7.1 system. We have developed a webi report on top of BW BEx query. We have created 3 variables in BW BEx Query and they appear as prompts in webi. The prompt variables in webi display both the key and text when the l
-
Apple tv 2 and airplay only registering as speakers.
Help apple tv setup fantastic streams my iTunes media from my mac pro upstairs fine. Having major problems trying to stream video from my iPad and iPhone 4. All my iPad and iPhone only recognise my apple tv as speakers and not a screen. So all it wil
-
Why do I get this error even when I have perfectly linked the media? In need of a desperate help please? Ta
-
Error in HTTP - SOAP synchronous senario.
Hi All, I am working on a HTTP -> SOAP synchronous scenario. I am using the wftetch tool to send HTTP request. I am getting the following error in the Wfetch tool when I try to execute the same: URL-Parameter service (sender service) in URL is missi
-
Exporting for the best quality
I am making a highlight tape of my children with some music. What is the best way to export the sequence for DVD with the best quality? DO I export it using the "Quicktime" option and make it a "Self contained movie" or do I uncheck this box? (There