Activate Smartnet using Quote Numbers?
I've inherited a job site that is 2/3 complete and nobody was following up on SmartNet as it got ordered.
Long story short is that I've got two quotes with SmartNet and a link to the old CSCC site to activate / register the SmartNet for my devices.
I've reached out to a few different E-mail / form message entities on the Cisco site but am having a hard time trying to figure out a way to get these SmartNet contracts registered. Anyone have insight on how to do it or who to call? I do have of course the device serial numbers as well.
If it's only a quote, there's no "activation". If you've put in a Purchase Order, the reseller should have created a sales order (SO). Given an SO number, the TAC can associate your cisco.com id with the contract.
If you don't have a SO number, you'll need to contact your reseller - like Leo said.
Similar Messages
-
How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!
Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ??? -
I am trying to activate a used iphone, but it wont let me switch numbers. what do i do?
I am trying to activate a used iphone 4, but it wont let me switch numbers. The number pops up in grey writing and doesn't give me an option to change it. what do i do?
Where is this phone number showing up in gray writing? The phone number comes from the SIM card that is in the phone when you activate it.
-
How to know if a MRP run element is using Quota Arrangement and lot size?
Hi all,
Two questions:
A) How to determine if a source is actually pulled from Quota Arrangement?
I am wondering if there is anyway from ABAP table or from Transaction (i.e. Purchasing Order) in which the source is pulled from a Quota Arrangement?
We use scheduling agreement, PIR and source list, and as well as Quota Arrangement for our purchasing.
I just want to know how, from system (table and transaction), to find out the source is from quota, not from PIR or others.
B) Quota Arrangement still can work properly if lot-size procedure's splitting quota indicator not Checked?
If my the lot-size procedure which I am using for a material does not activate the splitting quota indicator, it means split quota will not work during MRP run.
But does this also mean that quota arrangement will not be working for this particular material even if I have create a a quota arrangement object (via MEQ1) for this material?
Thanks
DanielTomek,
If I want to use the split quota, it seems there is some pre-requisite.
If you go to MEQ1 and press F1's on the "Minimum qty split" column, and you will notice the following message.
Allocation by quota using splitting quotas is only carried out via a requirement planning run, subject to the following preconditions:
Through the appropriate entry in the field Quota arrangement usage (on the MRP data screen 2 or Purchasing screen) it must have been specified that a quota arrangement is to be applied in the planning run.
The indicator for the splitting quota must be set for the the lot-sizing procedure used for materials planning purposes in Customizing.
Hence, the quota arrangmeent still workable even if the lot-size does not have the spliting quota box checked?
Indicator: Splitting quota in short-term horizon
The indicator for splitting is used to determine that in the case of the selected lot size, the quota arrangement is to be applied using the splitting logic.
Use
If this indicator has been set, the lot is split up in the planning run according to the following formula:
quota for source X
Quantity for source X = --------------------- * requirement
sum of all quotas -
IMessage won't activate glo Nigeria mobile numbers
i recently discovered that apple iphone users using Glo nigeria mobile numbers cant activate imessage on their numbers. it only works wits apple id. other networks activate within 1 hour. but with glo lines, it keeps charging for sms every hour and stays on waiting for activation.
Can anyone explain why other gsm networks in Nigeria activates imessage succesfully while Glo wont work. It was working initially before it stopped.Hi, Kennedyx.
Thank you for visiting Apple Support Communities.
I understand that you are unable to activate iMessage and receive an error. Here is a troubleshooting article that I would recommend going through for this specific issue.
If you get an error when trying to activate iMessage or FaceTime
http://support.apple.com/en-us/HT201422
-Jason H. -
How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?
How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!
Copied from the link provided.
Follow these steps to use your iPhone without a wireless service plan:
Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
Connect the iPhone to iTunes on a computer connected to the Internet.
Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch. -
I got an iPad mini from a friend who is now passed away and I'm trying to activate it using my Apple ID but it won't let me because I have to contact the previous owner, what do I do!?
Take it, the original purchase receipt, and the friend's death certificate to a physical Apple Store and see what they say.
(110829) -
I have a personal itunes account with an iPhone5s (perosnal mobile numer) and an iPad 4 mini (no SIMM). I have unlocked my old iPhone 4 to use for work on a different SIM and new number,
Do you know if I can have all devices associated to my single apple ID and still use both numbers without messing up my profile. It has just changed my number over.I would not be able to give you idiot proof guide, since different games are different. Some of them have icloud integrated already, but those already taken care of. Some of them use specific logins and once you log - you get your info. General recommendation is to contact support sites of those games for enabling icloud instructions or enabling of transfer. There are other purely apple ways - like sync your phone in itunes and then sync apps with ipad, but those are only one time transfer. There is another way that is not typically recommended - restoring ipad from iphone backup. It may transfer your game content, but once again sync in the future has to be done by game.
So if I were you, I would address that individually with every game provider. -
How to use different numbers ranges in LSMW for a material in 8plants
Hi all,
I have to upload data using MM01 in LSMW by using external numbers.
the MATNR for materials are like this 17240,22818,82618,487218,7218,26418
how can i take these numbers in LSMW.i have 61 material numbers to be extended to 8plants.can i upload these material numbers at a time in LSMW
the above material number should be extended to 8plants.but the field values for some fields are varying.the material number should be same for 8plants
For this issue, which method i should follow in LSMW.Just do one thing,
while recording enter the material numer field by yourself(Not blank).This material is the material which you mention out of 61,
and upload the same in your upload file, and just change plant.i mean 8 records are there for each material( all 61)
reward if useful.
Amit Singla -
I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5
lewbobber wrote:
Basically i need to either take it to a shop that can unlock i.e. £40.00
Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
Good luck. -
I need help with this program ( Calculating Pi using random numbers)
hi
please understand that I am not trying to ask anymore to do this hw for me. I am new to java and working on the assignment. below is the specification of this program:
Calculate PI using Random Numbers
In geometry the ratio of the circumference of a circle to its diameter is known as �. The value of � can be estimated from an infinite series of the form:
� / 4 = 1 - (1/3) + (1/5) - (1/7) + (1/9) - (1/11) + ...
There is another novel approach to calculate �. Imagine that you have a dart board that is 2 units square. It inscribes a circle of unit radius. The center of the circle coincides with the center of the square. Now imagine that you throw darts at that dart board randomly. Then the ratio of the number of darts that fall within the circle to the total number of darts thrown is the same as the ratio of the area of the circle to the area of the square dart board. The area of a circle with unit radius is just � square unit. The area of the dart board is 4 square units. The ratio of the area of the circle to the area of the square is � / 4.
To simuluate the throwing of darts we will use a random number generator. The Math class has a random() method that can be used. This method returns random numbers between 0.0 (inclusive) to 1.0 (exclusive). There is an even better random number generator that is provided the Random class. We will first create a Random object called randomGen. This random number generator needs a seed to get started. We will read the time from the System clock and use that as our seed.
Random randomGen = new Random ( System.currentTimeMillis() );
Imagine that the square dart board has a coordinate system attached to it. The upper right corner has coordinates ( 1.0, 1.0) and the lower left corner has coordinates ( -1.0, -1.0 ). It has sides that are 2 units long and its center (as well as the center of the inscribed circle) is at the origin.
A random point inside the dart board can be specified by its x and y coordinates. These values are generated using the random number generator. There is a method nextDouble() that will return a double between 0.0 (inclusive) and 1.0 (exclusive). But we need random numbers between -1.0 and +1.0. The way we achieve that is:
double xPos = (randomGen.nextDouble()) * 2 - 1.0;
double yPos = (randomGen.nextDouble()) * 2 - 1.0;
To determine if a point is inside the circle its distance from the center of the circle must be less than the radius of the circle. The distance of a point with coordinates ( xPos, yPos ) from the center is Math.sqrt ( xPos * xPos + yPos * yPos ). The radius of the circle is 1 unit.
The class that you will be writing will be called CalculatePI. It will have the following structure:
import java.util.*;
public class CalculatePI
public static boolean isInside ( double xPos, double yPos )
public static double computePI ( int numThrows )
public static void main ( String[] args )
In your method main() you want to experiment and see if the accuracy of PI increases with the number of throws on the dartboard. You will compare your result with the value given by Math.PI. The quantity Difference in the output is your calculated value of PI minus Math.PI. Use the following number of throws to run your experiment - 100, 1000, 10,000, and 100,000. You will call the method computePI() with these numbers as input parameters. Your output will be of the following form:
Computation of PI using Random Numbers
Number of throws = 100, Computed PI = ..., Difference = ...
Number of throws = 1000, Computed PI = ..., Difference = ...
Number of throws = 10000, Computed PI = ..., Difference = ...
Number of throws = 100000, Computed PI = ..., Difference = ...
* Difference = Computed PI - Math.PI
In the method computePI() you will simulate the throw of a dart by generating random numbers for the x and y coordinates. You will call the method isInside() to determine if the point is inside the circle or not. This you will do as many times as specified by the number of throws. You will keep a count of the number of times a dart landed inside the circle. That figure divided by the total number of throws is the ratio � / 4. The method computePI() will return the computed value of PI.
and below is what i have so far:
import java.util.*;
public class CalculatePI
public static boolean isInside ( double xPos, double yPos )
double distance = Math.sqrt( xPos * xPos + yPos * yPos );
public static double computePI ( int numThrows )
Random randomGen = new Random ( System.currentTimeMillis() );
double xPos = (randomGen.nextDouble()) * 2 - 1.0;
double yPos = (randomGen.nextDouble()) * 2 - 1.0;
int hits = 0;
int darts = 0;
int i = 0;
int areaSquare = 4 ;
while (i <= numThrows)
if (distance< 1)
hits = hits + 1;
if (distance <= areaSquare)
darts = darts + 1;
double PI = 4 * ( hits / darts );
i = i+1;
public static void main ( String[] args )
Scanner sc = new Scanner (System.in);
System.out.print ("Enter number of throws:");
int numThrows = sc.nextInt();
double Difference = PI - Math.PI;
System.out.println ("Number of throws = " + numThrows + ", Computed PI = " + PI + ", Difference = " + difference );
}when I tried to compile it says "cannot find variable 'distance' " in the while loop. but i thought i already declare that variable in the above method. Please give me some ideas to solve this problem and please check my program to see if there is any other mistakes.
Thanks a lot.You've declared a local variable, distance, in the method isInside(). The scope of this variable is limited to the method in which it is declared. There is no declaration for distance in computePI() and that is why the compiler gives you an error.
I won't check your entire program but I did notice that isInside() is declared to be a boolean method but doesn't return anything, let alone a boolean value. In fact, it doesn't even compute a boolean value. -
Question: I am using a mac , wired Keyboard, on a windows 8.1 platform ( this is because I have boot camped my hard drive) Unfortunately when I change over from my mac set up into the windows 8.1 the key board does not behave like it does when I am using as a mac. The numbers , on the right of the keyboard , no longer function and I have to use the numbers at the top of the keyboard, very annoying. Can anybody let me know how I unlock the numbers on the right of my keyboard?
Regards CMI have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly. -
Create Inbound Delivery with Reference to PO using Serial Numbers
I guys.
I didn't find any BAPI to create an Inbound Delivery with Reference to PO using Serial Numbers so I've made a Function Module with BDCData.
LOOP AT serial.
ADD 1 TO ld_count.
ld_value = serial-sernr.
CONCATENATE 'RIPW0-SERNR(' ld_count ')' INTO ld_field.
PERFORM bdc_field USING ld_field ld_value.
ENDLOOP.
This works fine for 10 entries, but when I'm trying to use 1000 entries in serial Internal Table I'm getting the error: Screen 0000 is too large for internal batch input area - Message no. 00379.
Please note that my issue is the Serial numbers, so don't answer me please with BAPIs that doesnt allow me to deal with this.
Any idea?
Thanks in advance,
NunoAs I expect, it solved my problem. It's not pretty, but it works...
PERFORM bdc_dynpro USING 'SAPLIPW1' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RIPW0-SERNR(01)'.
DATA: ld_valor(4) TYPE n,
ld_next,
ld_tabix TYPE sy-tabix.
LOOP AT serial.
ld_tabix = sy-tabix.
IF ld_next = 'X'.
CLEAR ld_next.
ld_count = 2.
ELSE.
ADD 1 TO ld_count.
ENDIF.
ld_value = serial-sernr.
CONCATENATE 'RIPW0-SERNR(' ld_count ')' INTO ld_field.
PERFORM bdc_field USING ld_field ld_value.
ld_valor = ld_tabix + 17.
ld_valor = ld_valor MOD 18.
IF ld_tabix NE 1 AND ( ld_tabix EQ 19 OR ld_valor EQ 0 ).
ld_next = 'X'.
PERFORM bdc_field USING 'BDC_OKCODE' '=PNPG'.
PERFORM bdc_dynpro USING 'SAPLIPW1' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RIPW0-SERNR(01)'.
ENDIF.
ENDLOOP.
PERFORM bdc_field USING 'BDC_OKCODE' '=RWS'. -
What are the Pros and Cons of Using Batch Numbers over Serialization
Dear SAP Gurus:
Will someone please give me the benefits of using Batch Management over serial numbers in this case scenerio, or vice versa:
Client wants to trace all the components of an assembly in a BOM. Even the Raw material. The client sends the material out today and has the vendor assign serial numbers to the individual pieces, the client gives the range of serial numbers to use. We are looking at using batch numbers to accomplish this and issue one material and batch number to a production order. Then use MB56 batch where used functionality to view history. I am wanting to understand the benefits of this. Please advise and points will be awarded as always.
Also, in this scenerio, can you issue multiple material/batch numbers to one vendor op that has its own production order?Yes it is a subcontract.
Example: This is the solution but need the pros and cons of doing this scenerio
Sheet of metal sent to vendor to make lets say 1800 peices of material number nas5703-01. All 1800 pieces come back and issued to a production work order using one bacth number for one material item so that batch number can be traced in history in MB56 and a fit up report. -
How can I uninstall Numbers? I've never used the Numbers application before, and suddenly all my saved Excel Worksheets are opening as Numbers documents, even though they continue to be identified as Excel documents? I'm losing years of work.
Right click on a Excel Worksheet file, choose 'Get Info'. In the small window that opens change the 'Open with:' from Numbers to Excel. Click on 'Change All…'
Maybe you are looking for
-
XML Publisher --Data Template-Help
Hi we are using XML Publisher attached to R12 , we are using data template ( .XML file) in data definition . we have a requirement for master details report. for that we have parent query and child query .the data coming to parent query should be the
-
I have a third generation apple TV and it works great with renting movies and streaming from my computer's library. However, it is extremely slow uploading movies recorded on my Iphone 4S. It doesn't matter if my Iphone 4s movie is streaming from m
-
SAme message corrupted on MacBook but not on Imac using same .MAC account
I have recently upgraded to Leopard on both my iMac and MacBook. I have a .MAC account and use Mobile. I have one message (received yesterday) that looks fine on my iMAC but is corrupted on my MacBook. I also upgraded to Time Capsule and had just com
-
I get an image after capturing from webcam; Now I have to add image(type) variable Say image Photo to label. Please Suggest
-
Multicam audio levels/meters??? - Premiere CS6
Is there a way to see the audio meters while in the multicam window? The audio plays fine but is there really no way to monitor the audio to see if its peaking or not, or what level its at, unless I stop the multicam and play it in the timeline? All