Activate source system

In RSA1 ->Source System. I right-click the R/3 source system and select Activate.
After a while (like 1 min), I hit error message saying the "Result of the destination check: Timeout".
Seem like the RFC timeout, how/where we can set this Time Out? Normally how long we set for this Time Out?

Hi,
Check if this thread helps you
Source system connection
RFC connection problem
Error while source system creation/Source system transport

Similar Messages

When I activate source system in BW, problem with IDoc (ZSBB027) occurs.

Hi,
I made some enhancing data source in R3 and when I would replicate and activate source system in BW, some error message occurs:
"Type IDoc ZSBB027 BW is not like IDoc in source system,
Incorrect IDoc ZSBA0003 in definition source system."
Can I find which data source is bad?
Thank You very much.

Hi,
there is no need to activate ur Source system unless if there is any problem in ur Source system.
When ever u do some changes in ur data source then replicate that into ur BW by going into RSA1-> Source system-> right click , Replicate data source. later u can assign that to ur info source..
Once if u do the replication then u have to activate ur Transfer rules by executing RS_TRANSTRUE_ACTIVATE_ALL.
Hope it helps-
Regards-
MM

How to de-activate source system in BI system...?

How to de-activate source system in BI system...?
Regs,
Naren..

Hi,
I feel we cant de activate the source system. Either we can aceive to do any of the following method:
1. Delete the source system
2. Remove the RFC Destination.
3. Remove the authorization to load the data.
I dont know why you are asking to deactivate the system. Coz this will not cuase any problem to you for any testing in the landscape. One more thing if you will do any of the above three activity, then Basic guys only rollback the actual situation.
So please be confident before doing this task.
Regards,
Vivek V

Not able to activate source system meta data

Hello,
For BW 3.5 The connection is working fine between source system and metadata is getting replicated successfully but in inactive mode.
While activating I get following error.
Incorrect IDoc type éâÄÃðôð@@@@@@@@@@@@@@@@@@@@@@@ in the ALE definition of the source system RSAR 373
Not sure what is wrong I have checked IDoc settings in both the systems they exists and the table RSBASIDOC has all the correct entries.
Thanks and Regards,
Milan

Hi,
Re-activate the source system in BW. That will recreate all the ALE settings. Make sure that the source system is open for changes and you use a user ID and password with appropriate auths for maintaining ALE settings.
after that
Try the restore option. Run check after that.
Regards,
San!

Source system Activation in BI

Hello All
I'm trying to activate Source System (RSA1) in BI System, I'm keep getting following ERROR.
BI unknown in source system
BI IDoc type ZWAA003 is not the same as source system IDoc type
The following errors occurred in the source system:
Incorrect IDoc type ZWAS002 in the ALE definition of the source system
Result of the destination check: Password logon no longer possible - too many faile d attempts
when I tried to re-set the password for background user (AEREMOTE), but I'm still getting the SAME error.
Thanks for your immediate help
BI

Hello,
First try to restore ur source system from the right click option. If it fails....
Check in WE20 of the source system whether proper idoc type are specified for the BI system.
You can compare with any other working source system for the idocs name.
Regards,
Shashank
Edited by: Shashank Dighe on Aug 13, 2009 9:13 PM

Error activating source system

hi all
in bi7.0 i have source system which is connected to r/3 4.7
while activating its showing error "Result of the destination check: Name or password is incorrect (repeat logon)"
I have given the right password for biwuser in BI and aleremote in r/3 side
when i am trying to restore after giving all password in the restore option of the source system its showing message "rfc user logon failed check connection"
what may be the reason as i have crosschecked all the password is right.

Hi,
I have faced similar issue. It is due to the version of R/3. R/3 4.7 stores the password in uppercase. When you activate source system, it supplies upper case password to biwuser in BI.
Change the biwuser password to uppercase and try restoring the source system with uppercase password.
Hope it helps,
regards,
Pruthvi R

Activating Source System

Hi All,
I was activating the source system from the IDES database.
In the source system screen when I see the u201CObject Informationu201D for this source system it displays u201CSource is Inactiveu201D, I tried activating the source system by doing a right click and activate source system, it says the following error
u201CCould not activate source system T90CLNT090u201D
u201CMessage no. RSAOLTP553u201D
Please help.
Thanks
Senthil

WIth your help i got the source system active. When i try to replicate the datasource i got the following error.
"The current program had to be terminated because of an error when installing the R/3 system.
The program had already requested 800385488 bytes from the operating system with u2018mallocu2019 when the operating system reported after a further memory request that there was no more memory space available"
I understand that iam running out of space. But can i replicate only one module which is "SD". If so how?
please help.
thanks
senthil

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

Source system activate/restore

I have created an R/3 source system in BW. Have checked SM59, WE20, WE21 many times and could log on to the source system. Have also replicated the source system. However, when trying to activate or restore the source system I keep getting:
First, the status message: Update source system application component hierarchy
Second, RSAR error 375: Result of the destination check: Timeout
And the activation is terminated.
My OSS Note 140276 search yielded nothing as well.

Hi Greg,
A. In the R/3 source system delete the entry in RSBASIDOC table for the associated BW sytem. This will delete the obsolete BW system connection.
B. In the associated BW system, RSA1>Source System>Restore will re-establishes the connection for the R/3 source system.
For more info, refer to OSS note:184322 (it's not relevant for your situation, but should help in restoring the connectivity). Hope it helps,
Cheers,
Sree

Activate all the datasources in source system

Hi,
We are in the process of transporting from one development server to another development server.
In the new development server we replicated all the datasources. But, all of them has come as modified version.
How to activate all of them once rather than going for one by one?
We checked some of the R3 datasources as well. Those are perfect.
Please send an immediate response.
Thanks in advance!
lasitha.

Hi,
Use the abap program RS_TRANSTRU_ACTIVATE_ALL and give the source system name.
Hope this helps
janardhan KUmar

Source system activate error

Hi,
I have created new source system for R/3 quality , when i am activating then getting following error. Kindly suggest how to resolve this error. Thanks in advance.
BI unknown in source system RSAR 8
BI IDoc type ZSDB018 is not the same as source system IDoc type RSAR 371
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Rgrds
Rakesh

Hi,
Check the source system RFC connection in SM59, if this is ok then check the tcode WE20 for EDI partner profiles and inbound and out bound Idocs defined.
In BW Out boud IDOC type should be same in ECC in bound Idoc type, and in ECC out Bound IDOC type should be same in BW in bound IDOC type then the source system activation is possible in RSA1.

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Source system (R/3) error while testing from BW

Hi,
We are trying to test the source system from BW. We have defined LOGICAL system in R/3 as well as in BW. We have also checked in sm59 for RFC tests and found to be successful in R/3 side as well as BW side. Bur when we tried to activate the R/3 source system in BW side,w e are getting the following errors. Please help urgently.
1.The following errors occured in source system - RSAR -374
2.Result of the destination check: Timed out - RSAR -375.
Thanks,
David

Have a look at this:
Problem Activating Source system RSAR 374, RSAR 375
Regards.

Data Reconciliation Node on SAP Source System

Hi Gurus,
I'm working on Data Reconciliation between SAP BI and SAP R3 systems. I've read on the forum that the reconciliation DataSource technology is available as of PI-BASIS 2005.1 / SAP NetWeaver 2004s. I'm using
SW Comp Release Level Highest Support Desc
PI_BASIS 2005_1_640 0017 SAPKIPYJ6H Basis Plug-In (PI_BASIS) 2005_1_640
I wonder that I cannot see the Data Reconciliation Node in the transaction RSA6 in the SAP Source System. Please throw some light on this whether I need to activate them.
Thanks & Regards,
Ash.

Hi Sunny,
Thanks for your response. Can you suggest me what should I do to get those DataSources? Are there any patches that SAP has released to overcome this problem for lower versions as the one which I'm using?
Thanks,
Ash.

0CRM_SALES_ACT_1 Cancelled in Source System

Hi, I'm having problems with a BI7 dataload, from our CRM source system, based upon the 0CRM_SALES_ACT_1 datasource. I've cleared down the data in my related InfoProviders, deleted all PSA requests and previous Delta Inits, and I'm now trying to load a new Init with Data Transfer. The job progresses so far (229,398 records) and then gets cancelled in the source system with the error message: "User is not integrated into organizational structure"
I've done some searching on SDN and can't find anyone posts with the same issue - my apologies if I've mised the key one.
I've reactivated the transfer structures using the activate all program in se38, and carried out an RSRV on the InfoProviders.
It was working when I last reloaded the data a few weeks ago, so something has changed either on the source system or the BI7 system since then, but I can't figure out why it's suddenly getting cancelled at source. It's also taking over 16 hours to get to this stage, whereas the last successful Init ran in four hours.
I've included the last part of the job log from the source system, showing the last successful data package and then the final system error message.
Any advice or help on this would be greatly appreciated.
01.07.2010 10:02:20 Asynchronous send of data package 38 in task 0042 (1 parallel tasks)
01.07.2010 10:02:20 tRFC: Data Package = 37, TID = AC10026B18944C2C4F29EB3A, Duration = 00:00:02, ARFCSTATE =
01.07.2010 10:02:20 tRFC: Start = 01.07.2010 09:17:44, End = 01.07.2010 09:17:46
01.07.2010 10:51:54 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 5,882 records
01.07.2010 10:51:54 Result of customer enhancement: 5,882 records
01.07.2010 10:51:54 Asynchronous send of data package 39 in task 0043 (1 parallel tasks)
01.07.2010 10:51:54 tRFC: Data Package = 38, TID = AC10026B1A7C4C2C599D01C0, Duration = 00:00:02, ARFCSTATE =
01.07.2010 10:51:54 tRFC: Start = 01.07.2010 10:02:20, End = 01.07.2010 10:02:22
01.07.2010 11:09:00 User is not integrated into organizational structure
01.07.2010 11:09:00 Job cancelled after system exception ERROR_MESSAGE
Kind regards,
Jeff.

Hi, there's no short dump.
Kind regards,
Jeff.

Activate source system

Similar Messages

Maybe you are looking for