Activate the EVDRE Builder after developing a Input Schedule

Hello Everyone,
Heading 2: I had a quick question about EVDRE.
Say U open a Builder using the EVDRE and select an Account in the Row and the Time in the column expansion.
After going thru some modification and formatting you realise that you need to also add the sort range and the Number of expansions for the Row and the column has to be increased to 3X 2 from 1X1.
Is there a way to open the builder again on the same sheet that we are developing rather than manually adding the expansions using the traditional copy paste method.
Thank you and Best Regards,
Shankar Ayapilla

Hi,
As per my understanding you wanted the ROW and COL., expansions to be added in the template without going
outside, I mean going to EVDRE builder is it correct?  If so you can copy the Exapansion 2 and paste adjusent to it,
but make Expansion 3 and change the Dimension as per your requirement similarly for Expansion 4 and set the
memberset as per your requirement and click Expand All and Refresh it.  Then it will work.
I hope this may help you.
Raghu B.S.

Similar Messages

  • I cannot activate the IPhone 3G after software updating

    I cannot activate the IPhone 3G after software updating

    You might be interested in visiting this thread which discusses a similar problem: https://discussions.apple.com/thread/4673269

  • Activate the Query Builder 2.0 in the application

    Hi all,
    is it possible to activate the query builder inside the application?
    With the custom theme.
    The query builder should be accessible through a link...
    Regards,

    Leonid,
    This is not possible.
    Joel

  • I want to ask that if some one restore iphone and the icloud is activited before it was last so the can activate the iphone and after restore can we track it

    i want to ask that if some one restore iphone and the icloud is activited before it was last so the can activate the iphone and after restore can we track it

    No.
    If the iPhone is running iOS 7, activation lock included with iOS 7 will prevent someone from restoring the iPhone or completing the process.
    If the iPhone can be restored, it cannot be restored from the iPhone's backup - only as a new iPhone or not from the backup.

  • Can't activate the iPhone 3GS after updating to iOS 5

    Hi All,
            I updated my iPhone 3GS to iOS 5 and i got the setup screen for the language and region and eventually i can't activate the iPhone
    as the iTunes says " there is no sim card installed in the iphone that you are attempting to activate "
    However the iPhone is already unlocked and i've been using it with 4.3.3 and also 4.3.5 and it was absolutely fine.
    Now i keep rebooting it and removing the sim card (which is working on another handset alreay) and it says the same msg
    PLEASE HELP !!

    First off, if you're using stuff like Redsnow and Ultrasnow you have violated any kind of warranty you had. This is no longer Apple's problem so look for help elsewhere. Second, you should have known that if you try to upgrade an illegally jailbroken or unlocked phone with the stock apple update, you would lose both the unlock and jailbreak. Obviously you're baseband is messed up and if you flashed it with the iPad 6.15 baseband you're out of luck ever trying to update the iOS version legitimately since you can't undue a baseband flash. You should have known that before you started messing with it. So either get a legit contract with AT&T, sprint or Verizon or try to salvage your mess through a jailbreaking/unlocking forum. You won't get any help here my friend.

  • Passing Messages after Submit in Input Schedules

    All,
    I have a scenario where I would like to send messages to the user after they submit data from Input Schedule. This is very similiar to how we receive error messages when we submit entries to a parent node. My scenario is this: When users submit data, I always write data to a particular version and run thru from BADI logic for validations. If it passes the validation, I move the data to a final version or else, I would like to display the messages due to which the data is not posted to final version. Currently, I have a BADI written in default logic. Whenever I write messages to ET_MESSAGES, it appends it to the log and I do not see it on the screen. I tried raise exception using CX_UJR_EXCEPTION, but the text id is 32 characters so it displays only the first error message. In my case, if I reject 10 entries, I would like to provide info on all these 10 entries.
    Ideally, I would like to write entries similiar to ET_ERROR_RECORDS (table) in UJR_WRITE_BACK but I do not see a similiar logic for UJ_CUSTOM_LOGIC. Has anyone done this before? Any input is appreciated.
    Thanks in advance.

    This is because excel still stores the values internally in the original format. It just formats the data for the display. So you need to enter the data value correctly in the cells.
    The other alternate would be to have the numbers sent from another evdre where number are multiplied by 1000 from the input cells.
    Hope this helps.
    Badrish

  • Building multi selection for input schedule

    Hi Guru,
    I woul like to build a query based on different selection for each colunm , could advice me how to build this input schedule.
       the structure should be like this :
         Drop down list for each field selection , the user can do different selection for each column .
         Field selection 1     Field selection 1     Field selection 1     Field selection 1
         Field selection 2     Field selection 2     Field selection 2     Field selection 2
         Field selection 3     Field selection 3     Field selection 3     Field selection 3
         Field selection 4     Field selection 4     Field selection 4     Field selection 4
         Field selection 5     Field selection 5     Field selection 5     Field selection 5
         Field selection 6     Field selection 6     Field selection 6     Field selection 6
         Field selection 7     Field selection 7     Field selection 7     Field selection 7
         Field selection 8     Field selection 8     Field selection 8     Field selection 8
    Key figure 1     1$                          2$                              1$                                                    2$
    Key figure 2     1$                          2$                              1$                                                    2$
    Key figure 3     1$                          2$                              1$                                                    2$
    Key figure 4     1$                          2$                              1$                                                    2$
    Key figure 5     1$                          2$                              1$                                                    2$
    Key figure 6     1$                          2$                              1$                                                    2$
    Key figure 7     1$                          2$                              1$                                                    2$
    Regards

    Hi,
    I dont think this can be done.
    In the columns, you can use EVMBR function. The user can select the member. Accordingly, the data cell should fetch the value using EVGTS. However, you need to make sure that your column represents only one dimension. So, you need to use the other dimensions judisiously in the EVGTS function.
    The problem comes now. You cant override the data cell with some other value, because that cell has a formula. If you write some value in that cell, the EVGTS function gets overwritten. And if you cant write value in the cell, then what will you send.
    Hope you got my idea.

  • I cannot activate the phone now after upgrading software

    I have an old phone, 3GS that I no longer use and wanted to use for my kid.
    I had to update Itunes so I did that.
    When i connected the 3GS which is no longer being used as a phone (but it is unlocked for any provider was using Tmobile) it asked me to update the software before I could move over the apps I have purchased on Itunes to the device.
    So I did so and then when it went to restart it made me go through the activation steps and just keeps saying that activation sever is temp unavailable??

    You might be interested in visiting this thread which discusses a similar problem: https://discussions.apple.com/thread/4673269

  • How to activate the Check box in Purchase Order after Goods Receipt

    Hi All,
    How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
    Where t make the settings in SPRO.
    Regards,
    Shailendra Hadkar

    Hi
    SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
    Then activate the auto PO creation in Vendor master - Purchasing view
    Check it out.
    Regards,
    raman

  • BPC 7.5 NW - EVDRE builder blank

    Hello all.
    I have a problem with my BPC NW system.
    I have installed BPC 7.5 SP05 in my server, and the client I am using is at SP05 Patch 2 level.
    There are two Appsets: the ApShell (with Rate and Planning applications) and one more which I created.
    This one is called TestAppSet, I created it as a copy of ApShell and it has 4 application: AppA, AppB,
    AppC and AppD. The first three were created with Add Application, and the last one as a copy of Rate.
    Then, my problem is: when I try to create an EVDRE in TestAppSet and one of the applications
    I created with Add Application, the EVDRE builder comes blank, with no dimensions to select, but if
    I try to do an EVDRE for AppD it works fine. It works fine too with ApShell.
    I read another thread with a similar problem, EVDRe builder blank (with no dimensions)
    but I think it is not my case because people say that it was
    an user issue, but I have the problem with more than one user and in more than one client system. Furthermore,
    the other problem was with all the applications in the AppSet, and in my case it works for some applications.
    Have I got to do any configurations in the server specific to new applications? Or in the applications parameters
    to activate EVDRE?
    Thanks in advanced.
    Best regards,
    Fernando

    are you running on Windows7, by any chance?
    We had the same issue on Windows7 and resolved it with a registry change.
    Reset below registry key value from U to <username>
    Start > Run > regedit
    Navigate to below registry key and modify the userid from U to your windows/bpc userid.
    Registry Key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Personal
    Old Value C:\Users\U\Documents
    Modified Value C:\Users\<USERNAME>\Documents

  • BW3.5: Error message when trying to activate the transfer rule

    When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error  in [[  ]]
    Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
    System response
    The action was terminated. No data was changed.
    Procedure
    Use the generation log in source system CI2220 to identify the error, and remove the cause.
    CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
    Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
    Thanks in advance
    Arunabha

    Hi Roberto,
      Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
      Thanks
    ARUN

  • ITunes keeps saying iPhone not eligible for the requested build

    iTunes keeps saying iPhone not eligible for the requested build after downloading the update directly through itunes with the lateset version of itunes.

    Here are some suggestions for your error message, copied from
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

  • Newbie Alert:  Is the Flash Builder 4 SDK for Eclipse

    the same as the Flash Builder 4 development environment with all the existing Eclipse functionality and perspectives?
    So I guess in other words, if I download Eclipse and the Flash Builder 4 SDK and install it to Eclipse, I should have the same functionality as Flash Builder 4 development environment, but with all the Eclipse standard perspectives, functionality, ect in tact?
    Thanks for the paitence and any replies.
    Regards,
    Jeff

    Hi Jeff,
    the Flash Builder Standalone version (not plugin) is an eclipse IDE ( Version Gaymede). Everthing is setup to develop Flex, with specialized views and perspectives for Flex.
    But you can use the software update functionality to install anything you like (c++, php, java, wtp etc).
    If you install the plugin version, it depends on top which version.
    Both FB3 and FB4 is testes with Ganymede "only", the most current version of eclipse is galileo, which was released some weeks ago.
    There are eclipse version configured for c++, php, Java etc. Then of course you have this version with the flex stuff on top. In the end you can have everything with both ways!
    What I said is true for Flashbuilder 3, with Flashbuilder 4 it is a little different.
    I tried to use the install the plugin version of FB4b1. Although the installation seems to work, several functionality does not work with the plugin version, but works with the standalone!
    As FB4 is still in beta 1  I recommend that you use the standalone version and install what you need on top of it.
    Then you will have less problems with Flex beta.
    You can install and use any SDK in your eclipse you like at the same time You can switch the version in the settings.
    Hope this helps!
    Martin Zach

  • Why was I requested to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.

    Why was I requested to enter a serial number for Acrobat Standard when I am only a monthly subscriber? I can't activate the product.
    After I sign on with email address and password, I am also asked to enter a serial number which I was not given...

    Hello,
    In order to activate the product should get the following option:-
    - Use trial or subscription
    - I have a serial number
    Please select the option - Use trial or subscription and click next- Restart Acrobat and sign in with your Adobe ID
    Also, you may refer to the following for more information on activation issues:- Activation & Deactivation Help
    Regards,
    Nakul

  • 'This device isn't eligible for the requested build'/phone does not work

    On Mon 9/23:
    I selected "update to ios7" on my iphone 4s.
    After about 10 minutes it went to a black screen with a cord, arrow and iTunes logo.
    I plugged it into my computer and attempted to restore via iTunes.
    I received the error message 'This device isn't eligible for the requested build'
    ​After much researching​ on the internet for help, following suggested fixes, multiple restarts and attempts at restoring, I continue to receive the error message. 
    I decided to see if I could get another device to be recognized. 
    I plugged in my old iPhone 3G and it worked just fine.
    I do not know what to do.  Please help!

    Try this discussion...
    https://discussions.apple.com/message/21923053#21923053
    From the More Like This  section on the right

Maybe you are looking for

  • Responsibility level exclusions

    I have the following SQL SELECT DISTINCT u.user_name, rtl.responsibility_name, ff.function_name,                 ffl.user_function_name            FROM fnd_compiled_menu_functions cmf,                 fnd_form_functions ff,                 fnd_form_f

  • Can't find a valid editor for this file extension

    When I try to open access from within Dreamweaver I get this error message. Can't find a valid extension for this file extension I have MSACCESS showing in Edit > Preferences > File Types Editors Many Thanks for any help John

  • Does CRM 2007 integrate into portal....?

    Dear Experts, Please clarify me in this.I am new to CRM 2007. 1)Does CRM 2007 functionality can be provide to customer through portal or CRM itself having the feature in 2007. 2) Does ERP integrate into the CRM Portal. 3)Does CRM Reports can be acces

  • I am increasingly having issues with clicking on links and not going anywhere with Firefox. When I paste the path into Internet Explorer it often works. Why?

    I have always preferred Firefox, but am getting quite annoyed when I click on Google links and don't get to the site. I thought maybe the sites were down, but then started pasting into IE and actually getting something. For example, today I clicked o

  • Update types in infopackage for generic data source

    Hi, Suppose if we create a generic data source,then 1) What are update types availbale in infopackage for tha generic t data source? 2) Is there any link between,the selection on the                            i)  type delta type select