Activate transfer rules - problem

I was creating transfer rules for DSO 0FIGL_O02 for infosources 0FI_GL_4. Activate transfer rules bring me mistake :Data element for InfoObject BELNR 0AC_DOC_NO could not be created.
Information from log:
Data element for InfoObject BELNR 0AC_DOC_NO could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject BELNR 0AC_DOC_NO. The data element should be of type CHAR and length 000010. The technical name of the data element is /BIC/OW_######################.
Procedure
Check the log.
Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary.
0AC_DOC_NO - is important because this is key in DSO. This object have type CHAR and length 10. What i shoult do?

Hi,
Activate the Infoobject 0AC_DOC_NO is not recognizing by system please re-activate this once again and check the transfer rules.
Regards,
Anand Tej.

Similar Messages

Not possible to edit Comm. Structure or Activate transfer rule

Hello Experts,
Do you know what is causing the problem in development box we facing? We are neither able to edit Comm. Structure nor activate transfer rule for myself data mast data sources in BW. Basically, it doesn't let us go in edit mode when we open communication/transfer rule screen on workbench (RSA1). This should be something basic problem but I can not think of anything now? Do you have any suggest about what to check?
Thanks,
Nimesh

I agree, Raj.
Details of what I have repeated (multiple times so far) in system:
Regenerated data source from ODS. Replicated data source to info source and then activated by program Teja suggested (that's where I am having trouble because I can not go to edit mode within transfer structure details screen). I tried loading data with init. request from ODS to Cube and failed with time stamp error of data source.
Issue is still unresolve?
Nimesh

Programme to activate transfer rule

Hi Gurus
I am trying to load data to newly transported work from BWD ( infosource 0FI_AA_11 ) but I got some error while loading transactuion data so i was told to run ABAP programme RS_TRANSTRU_ACTIVATE_ALL to activate transfer rules but not sure which transaction I need to use to run this programme .So would you pl tell me the name of the transaction and also tell me the logic behing running this programme?
Thanks as always

Hi Gurus
I have activated all the transfer rules and then try to load the transaction data but its stil;l giving me the same error.
<b>Extraction of 0FI_AA_12 not possible. Extract 0ASSET_AFAB_ATTR first
Errors in source system</b>
I have already loaded the master data and I have replicated the data sources also .So pl tell me what and where I need to check to load the transaction data successfully.

Unable to activate Transfer Rule

Hello Experts,
I am not able to activate Transfer Rule in my System ( BW 3.0).
I have written one routine and then when I am trying to activate I am getting below error messageu201D
Object 0NOTIFICATN_ATTR object version not found in table.
My Data Source name is 0NOTIFICATN_ATTR.
I have also tried to activate by using RS_TRANSTRU_ACTIVATE_ALL but still no luck.
I also checked table TADIR and I can see entry over there.
Regards,
Pankaj Naik.

Hi Pankaj,
Try to activate the transfer rules by executing the SE38 report - RS_TRANSTRU_ACTIVATE_ALL.
Also check the note - 884385 , For 'RSAR' errors while activating update and transfer rules.
Regards,
Lokesh

Activate Transfer Rules

BW Experts,
I am trying to activate transfer rules for 0MAT_PLANT. I get an error saying "Error while activating DDIC "
The diagnosis says the following
<b>/BIC/CABK0MAT_PLANT_ATTR-LOSFX (combination reference table/field /BIC/CABK0MAT_PLANT_ATTR-WAERS does not exist)
Message no. AD855
Diagnosis
The reference field specified for the field does not exist in the specified reference table.
Procedure
Check the reference field and reference table for this field in the single field maintenance of the corresponding table.</b>
Any Idea what has to be done. Help is appreciated.
Thanks
Ashwin

hi Aswhin,
0mat_plant_attr is business content datasource, seems this should not happen, if the waers not exist then the datasource should can be activated, perhaps metadata inconsistency (ddic error), try to replicate datasource again from bw.
or do you add fields (no access to system to cross check the datasource in r/3),
as mentioned check in r/3 rsa6, datasource 0mat_plant_attr, double click the 'extract structure', check if losfx has waers, if no exist, and you have no enhancement, try to transfer again with rsa5. then replicate datasource again from bw and try activate transfer rules.
hope this helps.

Problems to activate transfer rules and infosource 2lis_02_itm and 2lis_02_

hello,
now I am working with the 0PUR_C01 cube of purchasing and I want to active the data flow before for it.
I try to do it directly selecting data flow before in the activation settings of the cube, but I coludn´t
after that, I try to do it activating the transfer rules and the infosource separately but I get some errors, teh most important thing (because I have the same situation in other areas) is:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
I hope that some can help me with this issue,
Thanks in advance and best regards,
Niurka

Thank you very much Chetal,
I activated others Infocubes, but I have the same problem for Infocubes with ODS inside they data flow,
I tried with some notes like: 538052 and I enter the client but not the user or the server, I proved the RFC Connection too.
But the bug issue is the export data source creation that failled everytime, right now I try to solve this and the log says some error about the syntax error in transfer routine for the infobject 0GN_R3_SSY this object exist as characteristic and his convertion routine is ok (because I verificated) and exist as part of the transfer rule but I don't know how to go to the routine creator for check this point.
Thank you very much in advance,
Niurka.

Error when activate transfer rule 0DISTR_CHAN

Hi dear all,
I''ve a quesiton urgent, plz.
I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found his transfer rule isn't yet activated. I tried to activated it but a error message like:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        49
Message:    Statement concluding with "...LIKE" ended unexpect
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
Please help!
Thanks a lot.
Juan

Hi dear all,
Thanks!
I tried to re-install this business content just with flow before. And It works.
Best regards.
Juan

Transfer Rules problem - Version problem ?

Hello all,
I've got a "little" problem (or bug?).
I created an infosource which sends its datas to a cube.
The infosource has got datas from a datsource (TXT file) .
All was good. I could see datas on Bex...
But i wanted to change (and not create) a routine for 0CALMONTH in the transfer rule. This routine works. But when I manage the Infocube and i look at the new request, i'v got the datas of a previous request.
I clear all (PSA, demands...). And it keeps a old version of datas...
All is saved and actived!
I test to put "nothing" at 0CALMONTH (0CALMONTH <- X), i save, i active, i clear old datas, i launch infopackage, and i look at results for 0CALMONTH in the InfoCube.
And..... i still see results from the older version, and not an empty column....
So, can you help me for this problem???
Thanks.
Vince.

Hello,
Just requests and PSA were deleted.
I just want why an older version (seemed to be deteled) can appear in my results ?
I heard that "buffer" could be the cause of my disappointment.
Vince.

Transports(transfer rule)Problem

Hi Experts,
Bi Patch :16   BI_CONT :8
We are moving from DEV to QA.i ve transported infoareas,infoobject catalogs and infoobjects.
now im trying to transport master data infosources UR and transfer rules.
im collecting the objects in the following manner.
Ex:0material
Grouping :in data flow before
collection mode : automatic
Here im unable see the transfer rules but UR and infosources are there.(in transport connection screen)
Conversion of logical system names
in Dev i didnt maintain any thing
in QA i ve mainted Conversion of logical system names as
*Original S S            Target S S
BI DEV                     BI QA
R3 DEV                    QA DEV
I havnt chkd the box 7.0.
Assgnment of source system to source system id
here i clicked on suggest source system ids
i ve AU and AU.
Even i did a trail with transporting the request to QA but no luck it ended with error 4,but not getting anything even info source or UR etc.........
Plz help me,suggest me solution its very urgent.
Thanks,
Yunus

hii check the foll links and award some points
Re: Transfer rule error
Re: Transfer structure problem

Error RSAR 245 - Can't activate Transfer Rules in BI 7.0

Hello SAP community!
I'm working with BI 7.0 trying to create an Infosource for loading an InfoObject (Z version of 0MATERIAL but with less attributes) from a Flat File (CSV file).
In my Datasource/Transf.Struct fields are of types CHAR, DATS, and NUMC since I am reading from a flat file. Target attributes and characteristic are of the same data types (CHAR, DATS, NUMC).
The error message is:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template:   RSTMPL80
Error code: 6
Row:        47
Message:    Statement concluding with "...LIKE" ended unexpect
Procedure
Correct the template to remove the problem.
I am new to BI 7.0 and just have experience with BW 3.5.
I have searched for OSS notes and found several like 587869, 596749, 602318, but after reading the notes I still don't know if the problem is a support package is missing or whether I am missing some activity/action during creation of Infosource (since I'm new to BI 7.0).
I have checked SU53 right after error message occurs and it says that "The last authorization check was successful", so I don't think it is an authorization problem.
Can anybody help?
Thank you in advance.
Mario

Hi Maro,
If you are running on a support package less than 10 please upgrade and try as we had issues with data load from flat file , we got rectified after patch level upgrade.
Ideally if possible move on to SP14 , which is a bit stable and eliminates some of the issues automatically.
Raja

Problem in activating Transfer rules

Hi Experts,
I could not able to activate transfer rules using program "RS_TRANSTRU_ACTIVATE_ALL" by giving source system name and Infosource in Quality system.I am getting success status "No Transfer Structure Selected" but still transfer rules are in inactivate.I tried replicating data sources also still problem persists.
Please provide any suggestion how can i go about it.
Edited by: Sunilbm on Oct 30, 2009 12:16 PM

Hi,
Is there any error message when the transfer rules are transported from Dev to Quality?
Are the transfer rules transported from Dev to Quality successfully.
Post the message if any when the transport request is moved from Dev to Quality.
Regards,
Rama Murthy.

Error while activating transfer rules needs help.

The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar

Changing transfer method in transfer rules

I would like to change the transfer method in a TR.
It is set by default to IDoc.
I would like to set it to TRFC with PSA.
However, I can't because it is dimmed.
My aim is to find a workaround to an issue stated in SAP note 120446.
Thxs.
LauQ.

It is a Data Mart source in the same BW system.
I have created an Export DataSource from a PSA.
I cannot activate transfer rules due to a bug (note 120446).
This occurs because the transfer method is IDoc only.
I'm afraid that no solution exist for my problem.
Thxs.
LauQ

Unable to enter change mode transfer rule

Hi,
We are in the middle of our annual stackupgrade (from NW7.0 to NW7.01) and ran into a problem.
While testing I noticed that loading data from three old DSOs to their related infocubes does no longer work.
The error reported was that I needed to replicate the datasource and activate the transfer rules again. An error that occurred a lot during this stackupgrade with datasources from other systems.
Replication of the datasource went just fine, but so far it has not been possible to re-activate the matching tranfer rules.
I get the following error/message when trying to go into change mode of the transfer rule:
R3TR generated, changes possible
As a result the transferrule opens in display mode and it is not possible to change anything or re-activate the transfer rule.
An authorization issue seems unlikely, because I get the same error with sap all and my actions have been traced without issues.
Any suggestions?

Hi
Generally we do this using program
RS_TRANSTRU_ACTIVATE_ALL
Programe to activate Transfer Rules in BW
use program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources
Regards,
Venkatesh

While activating Transfer rules....

Hello BW gurus,
I am extracting CO Transaction Data from SAP R/3 into BW. I replicated 0CO_OM_CCA_1 standard Data Source into BW and assigned BI Content 0CO_OM_CCA_1 Info Source .
1) In the Transfer rules , all the fields from Data Source got mapped to the fields in Communication structure , other than those fields I find some fields(extra) in communication structure which are empty, I mean those fields did not get mapped .
1) what is the reason behind it , what is the main concept ?
2) how do I map these extra fields in communication structure ,and activate Transfer rules?
Points will be alloted ,
Thank you .

Hi Prarthana,
It is not mandatory that all the fields in Communication structure get mapped to the fields retrieved from source system. You can have extra fields in the communication structure means you can map some more fields from source using another data source by assigning same Infosource.
Without mapping them, you can activate Transfer rules and load data.
You can map them and load data into other fields using another datasource.
Hope this helps u...
Regards,
KK.

Activate transfer rules - problem

Similar Messages

Maybe you are looking for