Activate Update Rules from Business Content

Hello,
I am trying to install 0QM_C10 from business content. Every thing works fine except there are no update rules (there are 3 info sources for this cube). I am new to this and it doesn't make sense for me to manually create (ofcourse the system does the proposal) update rules. Since that is lot of work. I was expecting some transaction / tool where I can activate the update rules from the Business Content (since I can see the update rules in the business content under "Display Description". Is there any tool like that?
Or, am I doing some thing wrong so the update rules are not automatically installed from the business content along with Cube and info sources?
Note: I did separate installation for cubes as well as info sources from business content using Grouping by "Only necessary objects" option.
Thanks in advance.
Bala
Message was edited by: Bala Lingamaneni
Message was edited by: Bala Lingamaneni

Bala,
please don't uncheck the checkbox that you find when you open a new thread (let it as default!)...this is the only way to be able to assign points to your helper !
Write a request (as a normal post) into SDN Suggestion forum in which you ask to Marc Bernard or Mark Finnern to convert this post as question !
Bye,
Roberto

Similar Messages

Copy Update Rule from Business Content

Hi All,
Currently I have activated some standard BI Content E.g. InfoCube 0FIAR_C03, DSO 0FIAR_O03, InfoSource 0FI_AR_4 and all the corresponding update rules.
Now I have copied both InfoCube and DSO into another customized version E.g. ZAR_C03 and ZAR_O03. I managed to copy the same update rule from InfoSource 0FI_AR_4 to ZAR_O03 using the template but I don't have the option of copying the same update rule from ZAR_O03 to ZAR_C03 using the same update rule of 0FIAR_O03 to 0FIAR_C03.
I know I have the choice to manually re-create all the details but is there any other workaround?
Please read through carefully my question. I have seen some forum asking to load data from 0FIAR_O03 to then ZAR_O03 then so forth.
Purpose of doing the above method is because I want to remain the business content as what it is and just to copy it to Z version for customization.
Thanks
David Yee

Hi All,
Is there any other second opinion related to this issue before I close the question?
Thanks
David Yee

Error while Installing the update rules in business content

Hi All,
I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
please anybody can help me for solving this error.
i will asign points for your inputs.
regards,
kumar.
Edited by: kumar kumar on May 20, 2009 5:58 AM

Hi,
You can check the Content Release and Last Content Modification for your update Rules following thee given path:
RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
Change the Grouping as "Before and afterwards" and then try installing.
Hope it helps.

Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

Hi all,
I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
Similar to copying update rules in 3.5 I tried
- right click on "ZSD_C13"
- choose Additional Functions - Create Update Rules"
- choose DataSource: ODS Object "ZSD_O03"
- choose Copy from: InfoCube "0SD_C13"
This result in the error "0SD_C13 is not suitable as a template for copying update rules".
Some hints that might help:
1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
- This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
- This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
Thanks a lot,
Werner

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Update rules not getting installed from business content.

Hello,
One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
So i dont know how to get these update rules working.
Please advice,
Thanks

Hi Mukund,
please see also the answer that I provided to your thread
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
In addtion, you might want to check
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
and the online documentation for more general information about data modeling / acquisition.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Activate 0AUBPVEH withOUT new version of 0MATERIAL from Business Content

Hello experts!
I want to activate ODS-Object 0AUBPVEH from Business Content. With this ODS I have to activate InfoObject 0AUVEHICLE which has 0MATERIAL as an attribute. Our experts told me, that it is not really possible to activate the ODS-Object with using our existing 0MATERIAL and without activation of the new version of 0MATERIAL.
Can someone help here?
Thanks,
Peter

We found now another way.
Regards,
Peter

Activate 0MAT_UNIT from Business Content

BW experts,
I am trying to activate 0MAT_UNIT from Business content. Well I collected the object in the Business concent screen and clicked install. But in RSA1 I do not see this info Object. Did I miss anything?
Thanks
Ashwin

Hi A .H. P,
Well I got the solution from one of the SAP notes, it states that often because of the inconsistencies in the RSDIOBCIOBJ table this problem occurs and the solution to this is to execute the RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
Function module RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute
Refer Note 573421.
This solved my problem. Just putting this up here if anyone in future come across the same problem.
Thanks
Ashwin

Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

Hello Friends,
I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
Could you share some of your rich experience and possible resolution. Thanks for your help.
Gabeesh Mishra
[email protected]

Friends,
Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
I am communicating with Basis Team and they are aware of this problem.
In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
Thanks,

Error on installing infoobject catalog from business content

while performing Install from Administrator Workbench:Business Content I am getting error.
I am trying to install Infoobject catalog 0MMIC_CHA01 and 0MMIC_KYF01 from business content
The error messages appearing are as follows:
Installation (simulation mode) of: InfoObject (IOBJ)
Checking Objects with Type InfoObject
Checking InfoObject 0BPARTNER
Char. 0LEGALFORM is exclusively an attribute (cannot be a navigation attribute)
Checking InfoObject 0CM_CDT1
Char. 0CM_HIEID may not appear in compounding and attributes simultaneously
Characteristic 0CM_CDT1 is used as Navigation Attribute of 0RT_SEAROLL, but characteristic
IInstallation (simulation mode) of: ODS Object (ODSO)
Installation (simulation mode) of: Update Rules (UPDR)

Hi
It seems although's are warnings and not errors. Instead of using Simulation just install the content.
check out the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89?QuickLink=index&overridelayout=true
Regards,
Venkatesh

How to install sources for infobject from business content

Hi,
I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
Thanks

Hi daniel,
Inorder to install the business object, you will be require to follow the following steps :
i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc as you want.
v)Now you want to see if there can be some predictive error then go Install --> Simulate Installation.
vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your A-version Material Group will be overwritten by the D-version Material group provided by SAP.
vii)For ur more understanding lets take the example say you have added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X)
Hope it will help.
Thanks,
Deepak Machal

Problem while installing a query from Business Content

Hi all of you,
I am trying to install this particular query Inventory Turnover from the cube 0IC_C03 (Material/Stock Movements) from Business Content. Now in the third pane in Business Content under Active version available column across the name of this cube there is a calendar symbol.
a.     So does it mean that the cube 0IC_C03 (Material/Stock Movements) is installed along with all the objects that are dependent on the cube and all those objects on which the cube is dependent. (NOTE: I had selected the grouping option as In data flow afterwars)
b.     When I collapse Query Element I find that some of the queries are not installed. So I expanded Inventory Turnover query, right clicked on it and selected Install All Below.
c.     I am getting this error, Abort system error in program SAPLRRI2 and form LI_SETZEN-01- when I execute the query Inventory Turnover. However in Business Content when I installed the report Inventory Turnover under the cube Material Stock/Movement I didnt get any error anywhere. Everything was activated successfully without any errors.
Please tell me how do I install this Inventory Turnover from business content and how do I execute this report from BEx.
Thank you.
TR.

Hi Arun,
Thank you for that quick reply. I want to activate only the query and not the cube. I did as you advise me but still I am getting the same error when I run the Inventory turnover report from BEx.
I am able to run other reports from the cube IC_C03. But not this report Inventory turnover. I have also checked the cube and there is data in the cube.
Kindly adivse what to do.
Thank you.
TR.

Error while activating 0FIAR_O03 DSO from Business content

Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJ

Hi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP

Error in installing process chain from Business Content.

Dear Experts,
I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
<b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
Thanks in advance.
Regards,
NJ

ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
try this
Aravindan pagadala
satyam

Need to install from Business content

HI,
We have already active infoobject in DEV,but due to some bugs it is not getting to make any changes.
IF we re activate it from business content will there be any impact on the existing one.
What are the steps to reactive from Business content.
Thanks,
Erick.

Hi Erick,
You can install it.
Select the check boxes.
Install: To install the object and to overwrite the installed one.
Match/Copy: It will not overwrite the existing one. It will match with the Properties of the existing Object.
Regards,
Ramkumar.

How to open document from business content in weby dynpro ?

Hello experts,
I've cretaed a webdynpro where I want to display a document which is attached
to a product in tx commpr01 in business content.
I've tested method o_cl_crm_documents->get_with_url , but
there I do not get a url in webdynpro.
Does anybody know another method/fm to display such a document from
business content in webdynpro ?
Thanks and best regards
Gerd

Hello Mr. Jung,
I'm sorry but I didn't find this method linktourl.
In my web-dynpro I'm getting the url for my document after
cklicking on the selected row.
Then I just want to give this paramter to this linktourl method
and open the document.
How can I implement this method ? which class ?
Thanks Gerd

Activate Update Rules from Business Content

Similar Messages

Maybe you are looking for