Activate Windows 7 in Boot Camp partition on iMac 27

Hy,
I have a problem with Windows activation.
My configuration:
iMac 27.4 GB Memory, dual processor, OS X Snow leopard, Windows 7 in a Boot Camp partition
I use Windows 7 in 2 ways:
by starting the machine in the Boot Camp partition (with 4 GB memory)
by opening a session VMWARE Fusion under Mac OS X (with 1 GB memory)
No problem (except: very slow with starting and black screen - problem discussed in the same forum)
My problem: how to activate Windows?
I activated Windows after starting via Boot Camp: no problem
But when I use Windows via VMWARE Fusion, I receive a message “you must activate this version of Windows 7 - there remain xx days” I understand that the hardware configuration is not the same one, but I use Windows 7 out of only one machine (but with 2 different hardware configuration), therefore nothing illegal.
How can I solve this problem?
Has somebody the same problem ?
Thank you in advance.

hart40 wrote:
Did this actually work? My understanding is that Windows 7 regards this as two separate installations and that it won't work?
I'm trying to find out if I have to chose between bootcamp or Fusion or if I can work with both.
You need to activate Windows 7 in BootCamp and in Fusion. Microsoft allows multiple free activations. If these are the only two activations for your copy of Windows, just follow the online activation process. It is quick and simple. If this process fails for some reason, call the automatic activation line. You'll be stepped through the activation by an automated attendant (robot). In the very unlikely event that the automated call activation fails, call and talk to a Microsoft activation person who will help you out.

Similar Messages

Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?

Hi,
Did some preliminary searching on this before posting but couldn't find with confidence my answer. Does anybody know? Details below.
Q: Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?
I'm running 10.5.8 on a single drive with two partitions. 1st partition for OS-x is extended (journaled), 2nd partiction (ntfs) has solid version of Windows 7 RC, build 7100 running.
Thanks.

Hi Michael,
here are some nice 'Myths and Facts' about Intel Macs and BootCamp http://refit.sourceforge.net/myths/
Bottom line: while not exactly needed for installing Windows on an Intel-based Mac, the BootCamp Assistant 'streamlines' the process with a nice GUI (no need for 'cryptic' Terminal commands).
Mac OSX as of now (10.5 Leopard and above) plus the uptodate firmware for Intel-Macs already include everything needed to install and boot Windows.
Deleting or reformating an OSX partition does not affect the Windows partition.
However a repartitioning of course does, if the Windows partition is on the same harddisk.
But even a repartitioning of any other harddisk (ones that not have the Windows partition on them) does not affect the Windows partition.
Did that myself when adding/upgrading the harddisks in my Mac Pro.
Nonetheless, when 'fumbling' with harddisks and partition structure I always have backups of my important files at hand.
Take care
Stefan

Can't see Windows 7 Boot Camp partition from Mac

I've had a Win7 boot partition on my 2011 MBP for a while and it boots just fine. I have a Mac boot partition, a Mac data partition, and a NTFS Win 7 partition. But the Boot Camp partition is greyed out and invisible when booted in to the Mac.
When in Windows, I can see and use the Mac partition from Win7 with MacDrive. The problem is that I cannot see the Windows partition from the Mac. I have Paragon NTFS for Mac installed as well as MacFuse. I tried to see the partition with CampTune and got this error:
I also tried going to the BootCamp Assistant and saw this:
Yet when booted in Windows, I see the Mac partition just fine.
Here is the disk info from terminal:
Uptime: 11:57 up 3 days, 12:28, 2 users, load averages: 0.56 0.56 0.64
~ > sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1465149167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640   469926800      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
   470336440      262144
   470598584   699733064      3 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1170331648      262144
1170593792   294553600      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
~ > sudo fdisk /dev/disk0
Disk: /dev/disk0          geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 469926800] HFS+
3: AF 1023 254 63 - 1023 254 63 [ 470598584 - 699733064] HFS+
*4: 07 1023 254 63 - 1023 254 63 [1170593792 - 294553600] HPFS/QNX/AUX
~ >
Does anyone know if I can repair this without having to re-format? I have a 13" White MacBook as well and this setup works just fine. I did it such a long time ago that I forgot how I did the first one.
There is another thread on here that similar but not quite like my problem because I ca actually boo into Windows.
If anyone can help it would certainly be appreciated!
Thanks,
Randy

go to --------http://www.cnet.com/news/boot-camp-partitions-not-working-after-installing-os-x- lion/#postComments
just disable your ntfs software --- no need to uninstall

Windows 7 Boot Camp partition doesn't show in the System Preferences.

Hi,
I'm running an up to date 10.6.2 on my OS X partition and Windows 7 x64 on my boot camp partition. When I looked at the start up disk preference pane the windows 7 installation didn't show. Is this normal? 32bit XP always showed in the past. If not, what should I do to fix it? I know that I can boot into windows by holding down the alt key on boot but I would like to know this is working correctly.
Any help would be greatly appreciated.
Steve Bunt
Message was edited by: SteveBunt

Make sure that you have a good install of the Apple drivers (boot camp 3.x) in Windows and that Boot Camp Control Panel there works so that you can set the default OS to either, and that it works.
But yes, someone else mentioned the same problem or bug.
The only cause I've seen in the past was where Mac OS X had an NTFS driver and control panel (Paragon, MacFUSE, etc) and you had to use their control panel in OS X.

I guess I didn't explaine that I have a healthy operating Windows 8 Boot camp partition on my hard drive. When I upgraded to Mavericks I am no long able to access the bootcamp partition from the disk icon in system preferences; the Windows 8 works fine.

On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.

On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.

Disk space for a Windows 8 Boot Camp partition?

Hi,
Hope your are all doing good
Could you could please help me with how much hard disk space do i need for windows 8 bootcamp
Current Os ( Mountan lion)
Applications intended to be used Win 7/ Win 8
Office 2013 & office 2007 ( Only Word , Power point and Excel )
no files will be saved on the ssd in either mac or windows
Hard Drive docking station : 1 TB + ( For storage ( Videos etc )
***** If i am unable to install win 8 (ssd) and use a clone from my old hdd of win 7 is it ok or should i compulsory do a fresh install
System Specifications
Macbook PRO Late 2011 (15 inch md318ll/a )
Processor : I7 2.2GHz
Ram : 8gb (crucial)
hard drive : 256 gb (Samsung Evo SSD)

Do a fresh install. 60GB minimum is my recommendation. If you want to save data on the drive then 100GB would be better.

Recommended Boot Camp Partition Size for Windows XP

All,
What size is recommended for a Windows XP Boot Camp Partition? 100Gb? 50Gb?
Main use is to run a few programs that are not available for Mac. Most everything else will be transferred over.
Thanks
PAX
JD

Kalebd wrote:
All,
What size is recommended for a Windows XP Boot Camp Partition? 100Gb? 50Gb?
Main use is to run a few programs that are not available for Mac. Most everything else will be transferred over.
Depending on the programs you want to install, you can get by with very little. I have virtual XP systems that live within 8GB virtual disks. If you've got the drive space, go for ~30GB. I've found that to be a nice size for running Windows 7 within, and thus you likely won't have to mess with re-partitioning should you update the OS in the future.

[HELP] Windows 7 Boot Camp Boot Problem?

Hi,
I have a problem when booting windows 7 after installing it using bootcamp.
Here is what i did:
1) Used Boot Camp assistant to "Install Windows 7 or later version" (Last tick box option) - This also partitioned my drive.
2) While Windows 7 was installing it rebooted several times, I held the option key to select the Windows 7 instlltion disk for every reboot.
3) Once Windows 7 had finished installing I installed Boot Camp 5 for Windows 7.
However everytime I restart my Macbook Pro it boots into OSX Mavericks fine, When I go to startup disk there is no option to select the Windows 7 Boot Camp partition.
When I hold the option key while turining on my Macbook Pro I get the option to select the Windows 7 Partition, but when i select it I get a grey folder with a question mark. However when I turn on my Macbook Pro (with the Windows 7 installation disk inserted) holding the option key, when i select the Windows 7 disk it boot the Windows 7 partition fine?
I have installed reFind and tried that but I get an error: http://puu.sh/80FZt.jpg
What can I do to fix this? I want to be able to boot into Windows 7 without having the Windows 7 installation disk in the SuperDrive, and i also want to have the startup disk preferences to display the Windows 7 partition.
Thanks in Advance
Harvinder

Ok, I have done what you have both said (bobthefisherman & turbostar):
1) Deleted Windows 7 partition with BCA
2) Selected all 3 options in BCA, which created a USB install and it also partitioned my HDD
3) I waited for it to reboot and then it came up with a grey fold with a question mark in it
I never intervened with it in any way.
How do i fix this now? Any further suggestions?
Thanks
Harvinder

Cloned boot camp partition won't boot

I've bought a new SSD, installed OSX and used Disk Utility to make 2 partitions. 1 for OSX and another fat32 partition for win XP.
I cloned my old windows xp boot camp partition with dd.
then I followed the instructions to add a new hybrid master boot record and marked the partition bootable (sudo fdisk -e /dev/disk0, flag 4).
But the Boot camp partition doesn't show up during boot while pressing ALT and vmware is not able to boot into windows.
dietmar-mac:~ dietmar$ sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0 geometry: 62260/255/63 [1000215216 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 -   25 127 14 [         1 -     409639] <Unknown ID>
2: AF   25 127 15 - 1023 254 63 [    409640 - 967742600] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 968152240 -    1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 969421784 -   30531248] HPFS/QNX/AUX (it's FAT32 not NTFS!, however this changed after sudo fdisk -e /dev/disk0 flag 4)
dietmar-mac:~ dietmar$
dietmar-mac:~ dietmar$ sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=512110190592; sectorsize=512; blocks=1000215216
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1000215215
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640   967742600      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
   968152240     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
   969421784    30531248      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
   999953032      262151
1000215183          32         Sec GPT table
1000215215           1         Sec GPT header
I can't use winclone, cause they cancelled the fat32 support and older versions don't run unter osx 10.9.
Thanks for your help.

What is a startup repair?
Could please look over that.
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *512.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            492.0 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data WINDOWS HD              15.6 GB    disk0s4
dietmar-mac:~ dietmar$ diskutil cs list
No CoreStorage logical volume groups found
dietmar-mac:~ dietmar$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=512110190592; sectorsize=512; blocks=1000215216
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1000215215
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640   960937496      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
   961347136     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
   962616680     6805104
   969421784    30531248      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
   999953032      262151
1000215183          32         Sec GPT table
1000215215           1         Sec GPT header
dietmar-mac:~ dietmar$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 62260/255/63 [1000215216 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 960937496] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 961347136 -    1269544] Darwin Boot
*4: 0C 1023 254 63 - 1023 254 63 [ 969421784 -   30531248] Win95 FAT32L
dietmar-mac:~ dietmar$ sudo dd if=/dev/rBootcampDisk count=1 2>/dev/null | hexdump -C
dietmar-mac:~ dietmar$ sudo dd if=/dev/disk0s4 count=1 2>/dev/null | hexdump -C
dietmar-mac:~ dietmar$ sudo dd if=/dev/rdisk0 count=1 2>/dev/null | hexdump -C
00000000 33 c0 8e d0 bc 00 7c 8e c0 8e d8 be 00 7c bf 00 |3.....|......|..|
00000010 06 b9 00 02 fc f3 a4 50 68 1c 06 cb fb b9 04 00 |.......Ph.......|
00000020 bd be 07 80 7e 00 00 7c 0b 0f 85 0e 01 83 c5 10 |....~..|........|
00000030 e2 f1 cd 18 88 56 00 55 c6 46 11 05 c6 46 10 00 |.....V.U.F...F..|
00000040 b4 41 bb aa 55 cd 13 5d 72 0f 81 fb 55 aa 75 09 |.A..U..]r...U.u.|
00000050 f7 c1 01 00 74 03 fe 46 10 66 60 80 7e 10 00 74 |....t..F.f`.~..t|
00000060 26 66 68 00 00 00 00 66 ff 76 08 68 00 00 68 00 |&fh....f.v.h..h.|
00000070 7c 68 01 00 68 10 00 b4 42 8a 56 00 8b f4 cd 13 ||h..h...B.V.....|
00000080 9f 83 c4 10 9e eb 14 b8 01 02 bb 00 7c 8a 56 00 |............|.V.|
00000090 8a 76 01 8a 4e 02 8a 6e 03 cd 13 66 61 73 1c fe |.v..N..n...fas..|
000000a0 4e 11 75 0c 80 7e 00 80 0f 84 8a 00 b2 80 eb 84 |N.u..~..........|
000000b0 55 32 e4 8a 56 00 cd 13 5d eb 9e 81 3e fe 7d 55 |U2..V...]...>.}U|
000000c0 aa 75 6e ff 76 00 e8 8d 00 75 17 fa b0 d1 e6 64 |.un.v....u.....d|
000000d0 e8 83 00 b0 df e6 60 e8 7c 00 b0 ff e6 64 e8 75 |......`.|....d.u|
000000e0 00 fb b8 00 bb cd 1a 66 23 c0 75 3b 66 81 fb 54 |.......f#.u;f..T|
000000f0 43 50 41 75 32 81 f9 02 01 72 2c 66 68 07 bb 00 |CPAu2....r,fh...|
00000100 00 66 68 00 02 00 00 66 68 08 00 00 00 66 53 66 |.fh....fh....fSf|
00000110 53 66 55 66 68 00 00 00 00 66 68 00 7c 00 00 66 |SfUfh....fh.|..f|
00000120 61 68 00 00 07 cd 1a 5a 32 f6 ea 00 7c 00 00 cd |ah.....Z2...|...|
00000130 18 a0 b7 07 eb 08 a0 b6 07 eb 03 a0 b5 07 32 e4 |..............2.|
00000140 05 00 07 8b f0 ac 3c 00 74 09 bb 07 00 b4 0e cd |......<.t.......|
00000150 10 eb f2 f4 eb fd 2b c9 e4 64 eb 00 24 02 e0 f8 |......+..d..$...|
00000160 24 02 c3 49 6e 76 61 6c 69 64 20 70 61 72 74 69 |$..Invalid parti|
00000170 74 69 6f 6e 20 74 61 62 6c 65 00 45 72 72 6f 72 |tion table.Error|
00000180 20 6c 6f 61 64 69 6e 67 20 6f 70 65 72 61 74 69 | loading operati|
00000190 6e 67 20 73 79 73 74 65 6d 00 4d 69 73 73 69 6e |ng system.Missin|
000001a0 67 20 6f 70 65 72 61 74 69 6e 67 20 73 79 73 74 |g operating syst|
000001b0 65 6d 00 00 00 63 7b 9a 2b 06 2c 06 00 00 00 fe |em...c{.+.,.....|
000001c0 ff ff ee fe ff ff 01 00 00 00 27 40 06 00 00 fe |..........'@....|
000001d0 ff ff af fe ff ff 28 40 06 00 18 be 46 39 00 fe |......(@....F9..|
000001e0 ff ff ab fe ff ff 40 fe 4c 39 28 5f 13 00 80 fe |[email protected](_....|
000001f0 ff ff 0c fe ff ff d8 33 c8 39 b0 de d1 01 55 aa |.......3.9....U.|
00000200

How do I back up my Boot Camp partition to external firewire drive?

I have a 15 GB Windows XP Boot Camp partition (FAT32). I want to back it up to a 120 GB external Firewire drive. (I know the backup won't be bootable). In OX X Disk Utility, I formatted the external drive as MS-DOS (FAT). I planned to do the backup using the Windows Backup utility.
However, when booted into WinXP, Windows will not recognize the external hard drive. I thought I might need to create a FAT32 partion of 32 GB or less on the external drive, but I apparently can't do this in OS X or Windows (since Windows doesn't recognize the drive).
Any suggestions on how to backup the Boot Camp partition will be appreciated. I'm mainly interested in preserving all programs and data. Ideally, a clone could be created that could be restored back to the original partition in bootable form, but from studying this and other forums, it dosn't seem to be easy to do this for a FAT32-formatted volume.

My goal was to create a bootable clone of my FAT32 Boot Camp partition, while at the same time increasing the size of the partition from 15 GB to 32 GB if possible. This is what I did:
1. As suggested in this thread, I used Disk Utility to create a disk image. I formatted it as MS-DOS (FAT), and made it 32 GB in size.
2. Used the Finder to copy all files from my 15 GB Windows XP partition to the new disk image.
The following steps were only to determine if the disk image is a viable backup:
3. Removed the internal hard drive with my original Win XP partition, and installed a new internal hard drive.
4. Used Boot Camp Assistant to create a 32 GB Boot Camp partition on the new internal drive.
5. Inserted my Win XP installation disk and started the Windows installation. Formatted the new partition as FAT32. (I used the long rather than the quick format method--not sure if this was necessary.)
6. Continued the Windows installation to the point of restarting the computer, at which time I used the Option key to boot back into OS X.
7. Used the Finder to copy all the files from the 32 GB disk image to the new Boot Camp partition. (This overwrote a few Windows files installed by the aborted Win XP installation.)
8. Restarted and used the Option key to select the new 32 GB Boot Camp Partition. Windows booted as usual with all files, programs, etc. from the original 15 GB partition. Windows did complain about "new hardware" and required a restart, but all appears normal.
This indicates that the disk image containing all the files from my original Boot Camp partition is a viable backup, and can be used to restore the partition if necessary. I'm not sure if formatting the disk image as MS-DOS (rather than Mac OS extended) was necessary, or not.

Recover Deleted Boot Camp Partition

Hello,
A week ago I tried to delete Ubuntu from my Windows 8 Boot Camp partition on my MacBook. However, after the process I couldn't boot Mavericks anymore. When I finally got Mavericks to boot, my Windows partition became unbootable. After running the repair disk, I accidentally ran the "clean" command using Diskpart and COMPLETELY wiped my computer of everything - even my Mac OS X partition. The only way I could get my computer to become usable again was to add a partition using the Internet Recovery Disk Utility tools (there were 0 partitions) and fresh-install Lion.
However, I had all of my important files and apps on my Windows partition and my last backup of it (using Winclone) was outdated. I am not very familiar with this sort of situation, so I was hoping for some help. Currently, I have not attempted to add another Boot Camp partition, but I'm not sure if adding the Lion partition (to make my Mac usable) would make the Windows partition unrecoverable. Also, should I update to Mavericks and then take further action?
I would sincerely appreciate it if I could receive some assistance.
MacBook Pro 13-inch, Late 2011
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5

Sorry for the late reply!
I've found the NTFS partition with the right size capacity, 136 GB. However, when I press "p" to list files, the only directory folders that show up are .Trashes and System Volume Information. The partition also appears to be resized (it may have accidentally happened?) because its size is shown as 146 GB/136 GB.
How would I restore the NTFS partition so that I could fix it with a utility (because I think it's been accidentally resized)? As I'd said above, I deleted my Mac partition too and I had to install a new Lion partition. However, this new Lion partition takes up all of the partition space because there is currently only one, so would I have to re-partition it before I can restore the Windows partition?
Thanks again!

Can I delete the mac partition used to create the boot camp partition?

I am using Mac OS 10.9.5 on a late 2011 17" Macbook Pro.
I currently have an SSD in the primary drive slot with my primary Mac partition and an HDD in the Superdrive slot that has one unused Mac partition that I would like to delete and a Windows 8 partition that I would like to keep.
Can I delete the extra Mac partition on the HDD so I can use that as spare space? It was the Mac partition that was used to run Boot Camp and create the Windows 8 partition that is on the same drive so I am nervous that the Windows 8 partition needs to rely on that Mac partition to work for whatever reasons.
I recently went through a huge ordeal to create a Windows 8 Boot Camp partition as I wanted it on my computer. I had previously taken out the Superdrive and replaced it with a data doubler and the original hdd, and I had an aftermarket SSD in the primary drive bay. I had been using the SSD as my Mac partition and the HDD as spare storage space. For my Boot Camp config, I wanted to split the HDD into 2 partitions and make one Windows 8 and the other spare storage space while keeping the SSD dedicated to my Mac partition. Achieving that required removing the SSD, removing the data doubler, reinstalling the Superdrive, putting the original HDD back in the primary drive slot, installing and updating Mac OS on the HDD, using that Mac install to run Boot Camp and create a second partition for Windows 8, installing Windows from the Superdrive, and then putting everything back by taking out the Superdrive, putting the HDD back in the data doubler, and putting the SSD back in. Everything works now. Understandably I don't want to break anything and have to redo this process.
That said I do want to delete that extra Mac partition and use it as extra storage, if I can do so without breaking the Boot Camp Windows 8 partition.

ilovemac wrote:
Use Disk Utility and remove the "BOOTCAMP" partition. Then make "Macintosh HD" all the way to the bottom to regain space.
Wrong advice. Do not use Disk Utility. Use Bootcamp Assistant to remove the Bootcamp partition and return the drive to a single OSx partition. Using Disk Utility will result in lost space, lost data, and possibly an unusable OSx partition. Read the Bootcamp help and user guides.

Boot Camp partition won't mount in Disk Utility all of a sudden

I used to have a Windows 7 Boot Camp partition set-up and working perfectly.
Turned on my 2009 Mac Mini today and couldn't see it in the Finder. Opened Disk Utility, it was there, but grayed out. Right clicked and selected "Mount BOOTCAMP", got "mount failed"
Tried verifying and repairing disk, but no joy. So I removed the boot camp partition using Boot Camp Assistant and started again. Went fine, installed Windows 7 fine.
Booted back into Snow Leopard so I could unpair my bluetooth keyboard (I've found that I can only set-up the bluetooth keyboard in Windows 7 if I unpair it in OSX first). Again, Boot Camp partition doesn't show in the finder, and is grayed out in Disk Utility.
I googled this problem, and found a few people mentioning that NTFS drivers in OSX (e.g. MacFUSE, paragon etc) can cause issues because they conflict with Snow Leopard's own NTFS driver. I did have MacFUSE installed, so I removed it, but it didn't seem to change anything.
Any suggestions?

solution!
install NTFS-3G (http://macntfs-3g.blogspot.com/)
open disk utility and mount your greyed out partition (NTFS-3G will mount it)
unmount it
open system preferences, go to tuxera NTFS pref, second tab (Volumes)
make sure your windows 7 partition is selected from drop down menu then click "disable tuxera NTFS"
at this point i rebooted into windows, then rebooted back into snow leopard. my windows partition was once again mounted and visible in Finder
hope this works for you guys!
Message was edited by: colmiak

Can i "copy" a 200 GB boot camp partition from Mac Pro to MBP?

i spent a lot of time working with virtual machines and i have decided i simply have to increase the size of my mac pro HD and put a boot camp partition in it.
can i COPY a 200 GB windows 7 boot camp partition from my 1 TB Mac Pro drive to a 200 GB partition on my MBP that will have a 500 GB drive?
this would let me focus on doing a full install and full setup on the Mac Pro and just copy this over to the MBP (when i get the new drive) saving me a ton o time.
TIA
Also, is this something for WinClone?

hi kappy. THANK YOU.
is it possible that you or anyone has actually done this machine to machine and partition to partition?
i want to avoid a situation where i try to do this only to find it works better or is much simplyer to the the fresh install on the MacBook Pro just fresh.
- jon

Removing/hiding Boot Camp partition from VMWare Fusion?

I've just created and configured a Windows Vista Boot Camp partition and all is well. However I don't want to use it within VMWare Fusion but VMW displays it. Is there a way I can stop it from appearing in the VMW menu?
Thanks.

I've just created and configured a Windows Vista Boot Camp partition and all is well. However I don't want to use it within VMWare Fusion but VMW displays it. Is there a way I can stop it from appearing in the VMW menu?
Thanks.

Activate Windows 7 in Boot Camp partition on iMac 27

Similar Messages

Maybe you are looking for