Activate WM in existing storage location with stock

Dear all,
I have activated WM in existing storage location. Unfortunately, three materials where not transferred from this storage location before the activation of WM. So now i have them in IM but in WM i do not have them in any bins.
How can i resolve this?
best regards

Hello,
You can try with the transaction LX23 to confront WM and IM stocks

Similar Messages

  • Stock Transfer between Storage Location with Order

    Dear MM experts, 
    I am into SAP SD.
    Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
    But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
    Can you please suggest on how to achieve the above scenario.
    Thanks,
    Jignesh Mehta
    Mumbai

    hi
    Stock Transfer between Storage Locations
    u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
    u2022 As a result of which user can input issuing storage location with supplying plant.
    u2022 Facility of using different delivery types for different issuing storage locations is available.
    u2022 Shipping Point data can also be determined based on the issuing storage location.
    refer following
    http://sapfunctional.com/MM/StockTransfer/Configure.htm
    http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
    regards
    kunal

  • Warehouer Management for existing storage locations...

    Hi,
    We have several storage locations and only one of them was WM. All other storage locations do have stocks but they are not under WM. Now we decide to bring one of the other storage location under Warehouse Management... Which steps we should follow to avoid any future problems in the Warehouse?
    Thanks in advance for the solutions!!!

    Better to create the new storage location and than activate warehouse for that storage location than do the transfer from existing storage locaiton to the new with WM one.

  • Storage Location Wise Stock Value field and Table

    Hi ,
    Please let me know the storage location wise stock value field and table.
    Regards
    Suresh

    Hi Suresh,
    As per my understanding it is not possible in a single Table.
    If this is required for customized Z report then use this logic it may gives the correct information.
    In the combination of MARD and MBEW.. From MBEW you can get the value for each Base Unit of Measure then multiply that value with storage location stock.
    It may usefull to u..in the mean time i will try for some other option.
    Please revert if u have any query.
    Regards
    Durga Sana

  • MM Transaction did not flow to PA - specific storage location with mvt 945

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

  • Report for Storage location wise Stock with value..?

    Hi guru's
    Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK  with VALUE..?
    Urgent reply me  ..
    Thanks
    sap-mm

    Sorry Mr chetan,
    I want to see only the stock available in my company with Value and storage location wise..
    Please try to get report for this
    Thanks
    sap-mm

  • Replenishment between Storage Location with MRP Planning

    Dear PP Gurus,
    I need you expertise on the below question.
    I have a plant with multiple Storage Locations. One Storage Location is Main Warehouse and another ilocation s External Warehouse (3PL) where excess stock are kept due to storage capacity in the Main Warehouse.
    Now the requirement is replenish the stock to Main Warehouse from the External Warehouse with Stock Transfer using MRP trigger the Stock Transfer.
    I know the setting in MRP 4 View in the material master, the Indicator to set to 2, maintain a reoder point in the Sloc: 1200 and Replenishment Qty: 1500 and Special Procurement Type: (what should be the setting)
    My question is where to set the target Sloc and source Sloc, then only system will trigger the replenishment Stock Transfer?
    The storage location which is plan separately, will have a different segment. Therefore, in terms of the availability check for the Sales Order it will consider as normal based on the scope of check.
    Appreciate the reply
    Thanks & Regards
    Pooja

    Dear ,
    1.You need  to set up the MRP for Plant with group of storage location  and run MRP-MD01 .You can try SCOPE of planning -OM0E.
    As an information : In standard MRP I, f you have several storage location for your plant, you cannot plan for them separately unless you assign them to a separate MRP area.If a storage location (alone) is assigned to an MRP area, it means you wan to plan for it separately. If several storage locations are assigned to an MRP area (or let's say to a plant), it means you want to plan using all of them - and you cannot choose only one and plan for it (you can exclude a SLoc from planning w/o assigning it to MRP area).
    2.Find steps for config for activating Sloc to Sloc transfer within plant using STO : -
    follow path: SPRO--> Materials Management -->Purchasing -->Purchase Order -->Set up Stock Transport Order -->Set Up Stock Transfer Between Storage Locations
    1. Activate Stock Transfer Between Storage Locations
    2. Assign Delivery Type and Checking Rule According to Storage Location
    purchase document category 'F' , here use PO type UB, supplying plant, issue sloc and delivery type , (prefer to create new delivery type by copying delivery type 'NL' replenish delivery
    3. Define Shipping Data for Stock Transfers Between Storage Locations
    for plant defind sales org and distribution chenal and devision
    select the pline and go to sloc
    assign there customer (created for sloc)
    4. Define Rule for Determination of Shipping Point
    for newly created delivery type set L storage location specific shiping poing determination
    5. Assign Shipping Points According to Storage Location, assign her sloc based shiping poing determination
    at last when you will create PO put issue storage location, system will determine shiping data based on config done.
    after this process will be same as STO plant to plant using shiping.
    You will need to mention the issuing storage location during posting the delivery,
    ie, ME21N - Create STO
    VL10B - Create Delivery
    VL02N - Post Goods issue - here you will need to mention the issuing storage location
    Refer : STO process -Std in SAP
    Hope it is clear to you .
    Regards
    JH
    Edited by: Jiaul Haque on Jul 7, 2010 10:23 AM

  • Storage location wise stock

    hi all mm expert,
    in mb5b , stock come plant wise ie opening stock, closing stock, receiving stock, issue stock and thier values.
    now i required these opening, closing, receiving, issue, value storage location wise with date.
    a plant has 3 to 5 storage location.
    waiting your valuable reslponse.
    regards,
    santosh

    hi
    just give the range of stores
    like aa01 to zz99
    here u will cover up all the stores
    for the ragnge use the logic as per requirement
    also if u have list in excel ,then just go to mb5b and click on arrow in front of it then just pest it u willget all loctions
    regards
    kunal

  • Storage Location wise Stock details on a specific Date

    Dear All,
    Please help me with any T-code or Process by which I will be able to view the opening & closing stock storage location wise on a specific date. In MC.9 it shows the stock on current date or Month-End. In MB5B it will show the stock but not storage Location wise. Requires your sincere advise in this regard.

    HI , 
    There arent many reports  for date wise stocks in satnadard SAP. you will have to run MB5B  storage Location wise for the specified dates. OR
    you can try this one report J3RFLVMOBVED -STOCK OVERVIEW(RUSSIA) ,  Run it and save  a layout.  It should  solve your  problem.
    Regards
    Raviraj.

  • Best way to activate WM in a storage location

    Hi all.
    We want to activate warehouse management in a certain warehouse (0001) where stock is currently available.
    What is the best way to make the begin using WM in this warehouse?
    We thought to:
    1. transfer all the stock (unrestricted/ quality/ blocked...) from 0001 into another warehouse
    2. transport all customizing related to WM for that warehouse (0001)
    3. create master data in the new warehouse number/ storage type
    4. transfer the stock into the warehouse 0001 again to include the storage bins
    Is this flow correct or maybe is there any one better?
    Apart from this, I had a question about how to manage storage type and storage sections?
    We have clearly different areas in this warehouse:
    reception area
    production area with repetitive manufacturing
    storage for consumibles
    storage for pallets (where have been previously produced in production area)
    storage for aftermarket
    The mandatory requirement is to make goods receipt in a common area for all materials in this warehouse and, although there is no bin determination because operator will decide the bin to keep the material, he should know at least the type of material or the area where materials should be kept. For example, in reception area the operator is going to pick a consumible, he should know in which part of the warehouse it should be kept.
    My idea is to create one storage type with different storage sections (one per *) but maybe it is better organized if different storage types are created. What is the best criteria to do it?
    May thanks in advance and best regards.
    Edited by: sapera01 on Mar 18, 2010 10:59 AM

    HI,
    Check this link
    New to Materials Management / Warehouse Management?
    Regards
    KK

  • Error Msg enter storage location in stock transfer

    Hi SAP Gurus,
    Can anybody tell me when I am trying to do the PGI for stock Transfer order ,It giving error Msg enter storage location ,bit I have already entered the storage location.
    Msg type  App area  Msg No  item   msg text                        long text  Material   desc   Qty
    E                    M7         018       10     Enter storage loc                           2176       food    1
    Thanks ,
    Siddhartha

    Kindly check the Settings for that Delivery Item Category - Activate the check box for Storage Location Required & determine St Location. After this assignment , system should determine automatically the Storage Location.
    Now in OVL3 ,assign the Organization Units to determine the Storage Location.
    To check these settings, either delete this Delivery & create the fresh one & check.
    Best Regards,
    Ankur

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

  • Date Wise and Storage Location Wise Stock Qty & Value Report......

    Hi Experts,
    We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
    From Mb5b we canot get storage location wise report as we get only plant level qty and value.
    Pl. guide us.
    Regards,
    Yusuf

    Hi Yusuf,
        Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
    stock, value. if you double click the article you will get the details of storage location.
    Hope it will be help for you
    Regards
    GK

  • Storage Location wise stock report

    Can any one let me learn, How to get storage location wise & selected date wise stock report in standard SAP

    HI,
    Then you use T.code: MB51, where you will find the Date Range besides to Storage Location.
    Regards
    VG

  • Issue material to particular storage location with particular mvt type

    Hi
    I have a question about production order confirmation
    If i enter the storage location in goods movement page automatically come for movement type
    ex.
    I want to issue the material to scrap location.if i enter material and storage location SCR movement type should come 531.
    Is it possible ?
    Pl guide me

    531 movement type is used for receipt of By-products. So in your case if a particular item you want to receive in scrap location by the use of 531 then you have to define the item as by-product.
    If you define the material as by-product then during production order confirmation at goods movement screen, the movement type will be automatically 531.
    The main material (manufactured material) will be received using 101 and the by-product will be received by 531.
    Please follow below steps to define the item as by-product:
    - First change the BOM of the header material (the material which is manufactured) and enter the item with negative quantity.
    - Run Re-read PP master data for the production order.
    - Try confirmation.

Maybe you are looking for