Activated Aggregates still shows Status RED. How do I fix this?

Hi,
I created aggregates based on a 2 queries which are having some performance problems.
I then Saved, and Activated. During the activation, there was a message that an existing aggregate Stat29 will be overwritten. I chose Yes at that point.
Within 5 mins when I refreshed the screen, for Stat20, Status was Green but Filled column was Red. After 30 mins, both the Status and Filled columns became Green.
The problem is that still after one hour, my activation created 4 new entries:
Max Min 0
Max Min 2
Min 0
Max 2
and all these are still showing RED for the Status and for Filled columns.
1. What could be going on? Is it an indication of a problem?
2. What do these represent and mean: Max Min 0, Max Min 2, Min 0, Max 2
3. Is there a way to confirm that the Aggregates have been filled
4. How do I confirm that the aggregate can now be used by the two queries I created the aggregates for?
Thanks

Hi Amanda,
1. What could be going on? Is it an indication of a problem?
If I understood it right, you are seeing additional aggregates than the one that you have created based on the two queries. The additional aggrs are the system suggested aggrs, if you dont want them you can delete them.
2. What do these represent and mean: Max Min 0, Max Min 2, Min 0, Max 2
These are the system suggested aggrs, if you dont want them you can delete them.
3. Is there a way to confirm that the Aggregates have been filled
If you see a green lights at the Status and Filled columsn your aggrs are filled and ready for action.
4. How do I confirm that the aggregate can now be used by the two queries I created the aggregates for?
You can confirm if proper aggrs are being used or not using RSRT. In RSRT enter the query tech name and select Execute+debug. In the popup screen select "Display Aggregate Found" under "Aggrs". Click continue and execute the query, when you see the query result click the Back(green) arrow in the top toolbar. The next screen should give you the aggregates used information, keep clicking the back arrow for all the aggrs used.
Hope this helps...Assign points if it does.

Similar Messages

I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.

HT1386 hi, when i am syn my books from my mac to ipad even after one full day sync itunes show wait for items to copy and the books in ipad are still not fully loaded. how do i fix this, i have a large collection of books

hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 books

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

My computer broke and i lost all my music but the music is still on my ipod how do i fix this?

please help me...
my computer broke and i lost all my music but the music is still on my ipod how do i fix this?

Also See Here for using your iPod to put your Music back on your Computer:
http://support.apple.com/kb/HT1296
http://support.apple.com/kb/HT1848
http://www.apple.com/support/ipodtouch/syncing/
Cheers,

We have two iPad 2s and on one apps keep shutting down but on the other iPad the same app is fine. We have deleted the app, hard restarted and it still shuts down. How can we fix this?

We have two iPad 2s and on one apps keep shutting down but on the other iPad the same app is fine. We have deleted the app, hard restarted and it still shuts down. How can we fix this?

got the same problem. did the hard reset but to no avail. mine is ipad 2 16gb ios 7

DVD Studio Pro 4 "Formatting Failed, One of the volumes on the disc is still in use." How do I fix this to burn a project to DVD?

Trying to burn a project to DVD but get this error message: "Formatting Failed, One of the volumes on the disc is still in use."
How can I fix this?
Thank you for the help!

PaulKerepka wrote:
Trying to burn data on a CD-R disk, but then I get a window that says, "Burning failed" , and that one of the volumes on the disc is still in use", so
what does this mean?
You have a disc inside your optical drive.
Not sure what they mean by volume still in use, this apparentely is keeping me from burning info such a pictures and or video's,
how can I fix this?
Remove the extra disc.
My answers are basic because:
You never told us which model iMac you have?
How you are burning? Through iMac? External burner?
Which OS you are currently using?

I'm unable to open Safari. I keep getting a alert security message Suspicious Activity Might Have been Detected. How can I fix this proplem?

I'm unable to open Safari. I keep getting a alert security message Suspicious Activity Might Have been Detected. How can I fix this problem?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

TS1389 Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari

I can't open Safari. It keeps giving an alert that says, "Suspicious Activity might have been detected." How do I fix this?Please help. thanks!

Safari won't work. It flashes an alert. Alert says that a Suspicious Activity Might Have been Detected. Major Security Issue. How do i fix this? Please help. Thanks!

You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I synced my tv episodes to my ipod touch and it saying that the tv show is unknown how do i fix this?

it is showing the tv show as unknown on my ipod. how do i fix this?

I found another forum that had a solution. Instead of using the recovery discs that came with the mac, use snow leopard to perform the actions that I needed to do. It worked. No input/output error and the software recognized the 1Tb hard drive.

TS3367 When I answer my FaceTime for some reason the video shows up sideways.How do I fix this and turning the IPad don't fix it

When I answered my FaceTime the video picture went sideways and half the size.Turning it does not help and the people on the other side say I show up in a very small box.How do I fix this?

Understanding the Side Switch
http://support.apple.com/kb/ht4085

HT5824 my contact list does not update to its current state. After I sync to Itunes or after I back up to I cloud Also I did a doccuments and data restore and it still didnt change. How do I fix this?

My contact list does not update to its current state after I sync it to itunes or back it up to icloud I did a documents and data reset and the contact list still didnt change.. How do I fix this?

Welcome to the Apple Community.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

When i import videos from QuickTime Player, the video appear in red, how i can fix this

HI, sr/miss:
i have some troubles when in many times i had to import videos from quick time player to imovie 10, in all cases the videos appears in red and i dont know how i can fix this, so please if anyone can help me i really would appreciate it.
in addition, i am not an expert in imovie 10, so be straightforward with the answer.
thanks.

I am a complete novice with Final Cut Pro X. I have learned enough to do what I need to do. That being said I would gladly give you that info if you would point me to where I would find it. When I do a "get info" on the mp4 file it tells me that the dimension is 640x480, the codecs are H.264, AAC, and I have 2 audio channels. I did not download the additional content for FCP.

I just reset my phone to factor settings and now when i try to activate it it was my phone can not be activated because the activation server can not be reached. how do i fix this problem?

how do i fix this problem

Just have to give it some time. The activation and verification servers are all slammed right now 'cause of all the people trying to update at the same time. Give it a couple hours (or overnight if you can wait) and it should sort itself out.
= L.I.

E-mails I receive that include emoticons do not show the emoticons - how do I fix this?

Several people have sent e-mails with smiley faces or other emoticons. When I get their e-mails, I do not see their emoticons - instead I get a letter - a "J' for a smiley face, etc... How do I fix this so I can see the emoticons?

You can mass delete notifications. You don't need to remove them manually, traveling forum to forum or topic to topic.
On your Profile page, go to the Actions menu in the upper right and choose Manage Email Notifications:
Choose the checkbox in the upper right to select all email notifications:
Click Remove Selected Notifications, and you're done.

Activated Aggregates still shows Status RED. How do I fix this?

Similar Messages

Maybe you are looking for