Activated all datasources by mistake

Hi all,
I have the following problem - while I was trying to activate in RSA5 an FI data source, by mistake (I didn't click on the Select the Subtree +/- Button) I Activated ALL datasources (around 1046) which were added in a request.
In order to solve this I compared the Development with the Production, and deleted all the Data sources which were not in Production, and also deleted all the objects from the request.
Everything seemed ok. But, now that i did the replication of Data Sources from that system, in the BI system, I encounter the following problem: no data source has "arrived", other than the ones already existing, but for the ones already there, it has added a modified version (by me).(status changed from active to modified)
How can I undo this? It does not bother me, but the next time someone does a change here, problems may occur.
Please help!!!
Thank you so much,
AD

Hi
Use the program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources.
now goto R3 system --> RSA6 check the data source which you want are active or not.
If not activate them and replicate them into BI system.
Regards,
Venkatesh

Similar Messages

BC activation:all datasources are in 7.x instead of 3.x

Hi,
I'm activating SRM content and i have both 3.x and 7.x flows but the datasources that i had activated for the fist time are just in 7.x.
7.x flows are incomplete (trasnformations missing) so i decided to activate the 3.x but as i mentioned before datasources are in 7.x and i can´t see the update rules I try to delete the datasources and replicate them again but they still appear in 7.x
Any idea???
Thanks for your help

Hi,
Just out of curiosity, check in 3.x whether you have 'Display Generated Objects' turned on.
Arun

Bringing all datasources to target systems

Hi,
What would you recommend about bringing and activating all datasources available on the system to another target system? We have only 2-system landscape. I think that when the replication happens, it will take awhile.
Should I just bring and activate only those that are required and bring them over to the target system only when necessary?
Thanks

Bring them when required.
In R/3, you need not have to transport the ones you dont need.
Once you get them to the target system of R/3, you can replicate only that in BW.
Ravi Thothadri

Error while activating a datasource

Hi All,
We have created a generic datasource. While we are activating the datasource, its throwing up a message saying: "Error in database while accessing a table." And also "Generation of conversion exit and PSA update". Please advice.
Thanks & Regards,
Sanjeev

Hi All,
There are issues still pending in our report design. Besides the above issue, we have also got another issue related to Absenteeism column.
Example:
The report needs to show the absenteeism column on a monthly basis. If an employee goes on a unscheduled leave for 10 days which are scattered in two months (Ex: he takes leave from 28th April till 7th May), then if the report is executed for April, for that Employee, it should show only 3 days, i.e. 28th, 29th & 30th. The remaining days have to be displayed in the Absenteeism column of May report, i.e 1st, 2nd...till 7th.
There is one record whenever an employee goes on an unscheduled Leave.
Emp ID             From Date            To Date                        No of Days
111         28/04/2011          07/05/2011         10
Hence this record has to be split into two, based on the no. of days the employee has gone on an unscheduled leave in both the months like below.
April
Emp ID             From Date            To Date                        No of Days
111         28/04/2011          30/04/2011         3
May
Emp ID             From Date            To Date                        No of Days
111         01/05/2011          07/05/2011         7
Any inputs are most welcome.
Regards,
Sanjeev.

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Error while activating BC datasources

Hi guys,
I am getting this error while activating BC datasources...it is only with my login, rest of the users can work well.
Error:
DataSource 0BP_ACTITLE_TEXT; switch to package BUPA_CENTRAL_DATA_BW is off
this happened with all DS in the BC, the problem occured because while activating initially my connection got disconnected and then this problem started.....
how do i rectify this? any help would be highly appreciated.....

make sure that the server from which ur data source gets the values are also logged on

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

Satellite L655-11J - Hard disk activity all the time

Toshiba please I need help
The first run of my laptop I entered my location my name and a password, I install Toshiba updates and Windows 7 updates (the notifications I got) then I noticed the hard drive is active all the time and the laptop is very slow. I tried a lot to restore the original Toshiba image the built in the laptop and I finally did it thinking maybe I did something wrong
The hard disk drive still always active (don't know what reading or writing) no monitoring for any activity the laptop very slow and lot of seeking sounds.
any solution please, I got this problem the first use of it :(

I know it has a guarantee and they will replace it for free, but it was a gift from Saudi Arabia, I'm now in Syria :( I've to wait until on of my relative go back there :D
I went to Toshiba in Syria they charge my 7 $ to tell me the hard is defective although I knew it was so, and I will need to pay 100$ for a replacement so I will wait ;)
thanks all, it was my mistake, it is just I noticed the HDD light always on in windows 7 and it was not on in USB Linux so I thought it was a system problem, I didn't have much time to work on it and make tests :D
I'm sorry again

Activation of datasource :Error modified version

Hi All , Change icon is greyed out is there any program that i can run to activate the real estate datasource. or what is the other way to fix it
1. i activated the datasource in rsa5
2. it comes in rsa6
3. then in bi 7.0 i replicate the datasource but it shows modified version and change and activate button is greyed out.
please help me asap since its a BMW first deliverable and all my datasoources are in modified version. Kindly help
thanks
Soniya Kapoor

Hi, I've seen this problem before. I deleted the datasource in BW and then replicated again.
Regards
Dave

Error while activating the datasource during migration

Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
Doniv

Voodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv

2LIS_04_P_MATNR - Prob in activating the Datasource in R/3

Hello,
I am trying to activate datasource 2LIS_04_P_MATNR in r/3 in Tcode : rsa6/rsa5 and I am getting a warning that says
The even-numbered length of the DEC field I_DLZ_EX can lead to problems
I serached and found that note : 641744 is applicable.
The solution in the note says that there are 3 options to rectify this error as below:
If the field is not manipulated in the customer exit or elsewhere, no processing is required.
If you change the field, the following possible solutions are available:
You can make sure that the number of the characters does not increase after the manipulation.
If you can change the extract structure of the DataSource without affecting other scenarios (for example, if it was generated in transaction RSO2), you can increase the length of the DEC field (or CURR, QUAN) there to the next odd character (in the example above: from DEC 4 on DEC 5).
If neither of these solutions are possible, you can use a customer append that contains a relevant DEC field (or CURR, QUAN) with the next highest odd length. This can be used for the result of the calculations. This means that you do not have to manipulate the previous field.
I am opting the 3rd option i.e. to use an append structure with a field QUAN(in my case) that has next highest odd length
I am using the field BDMNG(length 13) from table RESB. The feild mentioned in the warning have length 12.
The problem is still occuring.
Am I able to understand the note correctly or am I missing something?
Can anyone help here?

Thanks Deva. I ignored the warning and went ahead with the enhancement.
After the activation of datasource I deleted and filled the setup tables, but the NPRT log showed 0 records.
Then after reading few threads at SCN I came to a conculsion that my setup table is refering to view CAUFV which does not contain data for order category AUTYP 10(PP Production Order) and therefore the data extracted is 0.
There was a thread mentioning the same problem that said (steps to fill the setup tables for 2LIS_04_PECOMP(Repetitive manufacturing Component view)) that the solution was to run OLIFBW Tcode after completing OLI4BW setup. So i did the same. But still my NPRT log still shows 0 records.
Also I checked AUFK table. It does not contain any data for AUTYP 10.
Please advise what should be the correct way to solve this.

Gwtting error while activation of datasource

Hi
i am using demo version . while activating my datasource ( flat file and , r/3 datasources)
i am getting this error. please let me know this error will be system related or we can solve our self also
function module SDF/AL_MAP_TRANSID_LOGH DOENT NOT EXIST
please let me know solution

Implement note 1114719. Not sure though, whether this also fixes your other issues mentioned

Regarding Activation of Datasource error

We have replicated datasource from R3 source system and while trying to activate it was posting error
of while activation of transfer structure with conversion exits., We are using 7.0 datasource only.
We checked at RSA3 of datasource and data is coming successfully., we tried with program transferstruc activate program
and rsds-datsource program but couldnt able to get rid of error.
Can you please help me to resolve the issue of what to be done for activation of

error while activation of datsource: Generation of conversion exits and PSA update...
                                                           Error when creating transfer structure /BIC/CCGNZP31_MM01_DS in source system Z370_110
                                                             Error when activating DataSource ZP31_MM01_DS                  Z370_110
                           These are the above errors mentioned while activating the datasource in 7.0.

How to keep the save-button active all the time?

Hi!
I'm using mobile sales 4.0.
On a tile i've only fixed questions and combo boxes with yes and no ...
When i write manually a "yes" in the combo box field the save button is active - When i use the combo box with a mouse click the save-button isn't active.
What are the settings i've to do to keep the save-button active all the time?
Thanks a lot in advance.
Best regards,
Ingo

Hi Ingo,
If your combobox is a bound control, then when you change a value in it, the save button should be enabled. Strange. But anyway, you can do this.
In the <b>combobox_OnValueChanged2</b> event, make a call to makeDirty method in the tile:
If boundAttributeChanged Then
<b>anchorthatyourcombotiedto</b>.bo.MakeDirty True
End If
This will make the Save button enabled.
Regards, Vadim.

Activation of datasource in SBIW

Hi experts
I have activated the datasource 0TCTATYPE_TEXT in development system.
This object has not been assigned to a transport order.
In development system this object is in both object version available: A and D.
In test system only object version D is available.
Any ideas what's wrong?
Thanks

I assume you generated this in development class or package (as they call it these days) $TMP
you can change it as follows:
open your DataSource (via RSA1)
follow menu path: Extras > Object Directory Entry
click Display/Change (or F6)
change $TMP to a valid (transportable) package
hit the green tick
you'll either have to assign a transport request then or create a new one

Activated all datasources by mistake

Similar Messages

Maybe you are looking for