Activated infoObjects does is not visible in AWB

Hello,
I working with a brand new BW system. First this to do was to activate a lot of business contents.
The activation process went OK, but none of the activated InfoObjects are visible in Administrator Workbench under MODELING -> INFOOBJECTS.
Only Inforobject catalogs are visible.
If I open a cube I can see the infoObjects and they have the status: Activated.
My 'Select display option' in AWB is set to 'Display all'.
Has anybody an idea why?
Kind regards, Torben

Hi,
Thank you for your answer.
It is not just one infoobject I'm missing. It's all of them.
I activated cube 0SD_C02, 0SD_C03 and 0SD_C05 and all of the related objects.
In RSD1 I can find all the infoobjects used in the 3 cubes, but in AWB/modelling/infoobjects none of them are visible. They are not under "unassigned notes" and they are not under the infoarea catalog and they can not be found by using search.
But in RSD1 they can be found and they have status activated
Many thanks, Torben

Similar Messages

IO is active in BC but not visible in RSA1

I have installed one IO '0PO_NUMBER' from Business Content
and have saved in local object.Following way I installed the
infoobject,in the right hand pane its showing active but its not
visible in RSA1.
Steps
1. Dragged the perticular IO-PO_NUMBER to the right pane and dropped there.
2. Grouping - In data flow before
3. Collect - Automatically
4. Install - Install
Now IO is avtive in BC -right pane where we used to drag and drop the IOs.But in RSA1 its not found.
Could somebody tell me why its not found ?

Hi BI Experts,
The standard IO that I have installed successfully form
Business Content is showing active but its not visible in
BW system.
Then again,I have deleted the IO form RSD1 and installed
it and got the same result as it was before.
Your suggestions are welcome.
Apart form this,Please tell me how to find inactive IOs in
BW system.
Thanks

Active UserConcurrent Program output not visible when submitted via CONCSUB

Hi All,
I am not able to see the concurrent program "Active Users" output from EBS front end, when i submit the Active users request using CONCSUB utility.
After submitting Active user program from CONCSUB, when i go to front end and and try to view output, "View Output" button is disable.
Any idea why is "View Output button" disable.
When i submit the same request from front end, it shows me output.
Thanks,
Prasad

Prasad,
What is the CONCSUB syntax you use?
What is the value of "Concurrent:Report Access Level" profile option?
Note: 200272.1 - How can a user see the output and logs of other users?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200272.1
Note: 413382.1 - How To View The Output Of A Request Launched By Someone Else
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=413382.1
Regards,
Hussein

Illustrator CC Workspaces, my workspaces are not visible, I can't access my palettes. Can anyone help?

At some point I lost my workspaces, i have tried selecting "Essentials," "Printing and Proofing." and even creating my own work space, but now none are visible. Under window in the main bar it shows those palates as active but they are not visible. Are they hidden, if so what is the key stroke to unhide them?

I am having a similar problem on both of my computers. Both running OS 10.10.1.
Illustrator works space selections will not load palettes. If I get one set to appear and try to add another palette to the visible ones, it will not appear, though checked in the Window list. The web word space seems to be the only one that will appear by selection it. But no other palettes can be made visible.
Did you find a solutions to this? I have shut down numerous times. No older versions are loaded on the computers as both hard drives were wiped clean for the upgrades.

Enhancement section does not visible at runtime

I created enhancement section in SAP standard program, activated it but it does not visible at runtime. How do I make it available? Thanks!

Hi Anthony,
Have you implemented Implicit Enhancement?
Once code is activated without error there is no other step required.
Refer [Enhancement|https://wiki.sdn.sap.com/wiki/display/ABAP/ThenewEnhancementFrameworkandthenewkernel-basedBAdI] for more information.
Regards
Shital

After activation of atandard business content key figure is not visible

Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modi

Hi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM

The kind infoobject does not exist in the CMS

hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
the kind infoobject does not exist in the CMS
the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
then i found some error explanation
Cause
The InfoObject type does not exist in the CMS
Action
Ensure that the InfoObject type is propertly installed.
and
Cause
An InfoObject type is missing.
Action
Ensure that the XSD for this type of InfoObject is installed.
I want to know how to reinstall the infoObject type.
or any other idear on this.
thanks all.
Ada

WHat's the exact version of the source and the target BO system?
Regards,
Sratos

I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.

I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.

On your iPhone, try toggling Find My iPhone off, then back on after a few seconds.

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

Error: InfoObject does not contain alpha-conforming value 20030729

Hi everyone,
I got this problem, that i tried to fix yesterday, but all i did was that i got realy frustrated...
I created an infoobject which is copy of 0DOC_NUMBER and has alpha coversion routine.
Mapping field in DataSource is also type character 10(VBELN) as my infoobject.
But there are some values in this field that i am trying to load, less then 10 characters long (20030729,20051116...) and shouldn't be there, because the values are dates and not document numbers.
But anyway on R/3 side this values are in field which is defined as character 10 (VBELN), and when I am trying to load Infopackage(17500 records) I get 52 errors: InfoObject does not contain alpha-conforming value 20030729.
I don't get it, since both fields are type character 10 and the values are only digits, why do I get this error message and how can I fix it?
PS:One solution is to remove alpha conversion routine from infoobject, but i don't want that.
Regards,
Uro

hi,
sorry... correction, it's 'Exclusive attributes' that cannot be used for navigational attribute, you can set lower case to differentiate ... check the impact of lower case setting here ...
http://help.sap.com/saphelp_bw33/helpdata/en/b7/f470375fbf307ee10000009b38f8cf/frameset.htm
Lowercase letters allowed / not allowed
If this indicator is set, the system differentiates between lowercase letters and capital letters when you use a screen template to input values. If this indicator is not set, the system converts all the letters into capital letters when you use a screen template to input values.
If you choose to allow the use of lowercase letters, you must be aware of what happens when you input variables:
If you want to use the characteristic in variables, the system is only able to find the values for the characteristic if the lowercase letters and the capital letters are typed in accurately on the input screen for variables. If, on the other hand, you do not allow the use of lowercase letters, any characters that you type onto the input screen, are converted automatically into capital letters.
Exclusive attributes:
If you select Exclusively Attributes, the created characteristic can be used only as a display attribute for another characteristic, and not as a dedicated characteristic in the InfoCube. Furthermore, you then cannot transfer the characteristic into InfoCubes. However, you can use it in ODS objects or InfoSets.

"Domain Users" group in Active Directory does not belong to any Group Membership in LC

Active Directory user belonging to "Domain Users" group does not belong to any Group Membership in LC, why does it not belong to "Domain Users" group?
Any way to correct this issue, without changing group membership on AD side?
If Active Directory user is member of "Domain Admins" or "Users" then these show same group membership in LC.
Thanks.

If you want to use the Domain Users group for the purpose of representing all the users then you can use the "All principals in domain xxx" group which is created by UM.
Coming back to Domain Users group. For determining group membership in AD UM uses "member" attribute of the group object. "Domain Users" group is treated differently by AD. It is the default primary group for all the users and normally members of the primary group are not specified using the member attribute.So when we sync the data from AD "Domain Users" membership does not get completed.

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

I just update to ios6 and mi wifi blow up, the activation button does not slide to on position, is blocked

I just update to ios6 and mi wifi blow up, the activation button does not slide to on position, is blocked

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

"The Dictionary structure or table "*C865" is either not active or does"

Hello experts,
I have a transaction - VKOA. I get the following error on executing this t-code. The program used by this t code is SAPL089C.
The error is
Runtime errors         SYNTAX_ERROR
Occurred on     11/23/2009 at   05:12:58
Syntax error in program "SAPL089C ".
What happened?
The following syntax error occurred in the program SAPL089C :
"The Dictionary structure or table "*C865" is either not active or does not exist."
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
The following syntax error was found in the program SAPL089C :
The Dictionary structure or table *C865 is either not active or does not exist.
Please suggest a suitable solution to this problem...
Many Thanks in adv.
Kunal
Edited by: kunal kotak on Nov 23, 2009 6:53 PM

Hi ,
I will try the solution propesed by Max.
In the meantime, I would like to confirm if there is something related to SAP Note # SAP Note 72121. Refer the following details from the note.
Symptom
When you maintain account determination (FI or SD), you get the error
message:
The DDIC structure or table "*C400" is not active or does not exist.
OR
The system writes a dump with DBIF_NTAB_TABLE_NOT_FOUND, C400 was not
found.
C401 can also appear instead of C400.
Additional key words
Tables C400, C401.
Program: SAPL089C, L089CT00
Transaction: VKOA
Solution as per the note
1. Execute the program RV12A002. On the selection screen, enter Usage C,
Tables 400 to 401.
WARNING: Make sure that you only delete C400 and C401!
Execute the program.
2. Execute program RV12A001. On the selection screen, enter Usage C and
mark 'Reports & Screens'.
Can there be sometihing similar to this for C865 table as well. Just a thought.

"Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

hi,
i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode". When i press the buttom "start recording" i recieve the error message >6 117 Mass activity type does not exist.
Does somebody know what can i do?
thnaks

On the right click on HD under video quality to filter it.

Activated infoObjects does is not visible in AWB

Similar Messages

Maybe you are looking for