Activated panel doesn't overlay other panel

activated panel doesn't overlay other panel. enclosed is a sample where the timeline remains over the playback monitor.
it refers to pp cs6 in cs5.5 it works fine.

How can I extend the timeline to fit two monitors?
I did it in 5.5. with no problem.

Similar Messages

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

Custom vi panel doesn't show in panel

Hello,
I inserted a custom vi that I created into another vi. The problem is that the panel of the custom vi doesn't show on the new vi panel. What do I need to do to get the custom vi panel to show in the new vi panel.
Thanks,
Steve

For some reason I can't open your VI. I'm getting a daq dll error. I'm
sure it's something on my end as I just got a new laptop and just
reinstaled everything and something probably didn't go right.
Subpanels are a feature that was added in 7.0 that let's you embed the
front panel of a subVI into the panel of its top level VI. The subVI
panel shows up in a container on the other front panel. This allows you
to switch between several panels, but have them constrained inside the
top level VI. Nice little feature, but since you're running 6.1, it's
not available to you.
Recreating the subVI on the top level VI would be just duplicating all
the controls and indicators from the subVI to the panel of the top
level. Probably not what you should be doing.
It sounds like you found the "Open front panel when Called" option and that should do the trick for you want.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Adobe Exchange panel doesn't appear in Dreamweaver CC

I've joined CC and I'm using Dreamweaver, I've also tried to download and install Adobe Exchange panel without success - I can see it in extension manager but the panel doesn't appear in Dreamweaver. I'm beginning to regret ever signing up for CC as it appears to be very glitchy. Could someone help me with this please.
I'm running Windows 7
Many thanks
Maddie

Hi Maddie,
Thank you for this extra information regarding the Exchange Panel not appearing. It's strange that the problem appears in both CC and CS6 - these use different processes and different installation directories for extensions and should be independent of each other.
A few questions -
Can you please look in Task Manager when Photoshop CC is running and see if there is a process listed called "Adobe CEP Service Manager"? Do you have any "system optimisation" or security software running which may be blocking processes that you haven't expressly permitted?
In Photoshop CC, can you see any other extensions listed in Window -> Extensions? Upon installation there should be other Extensions available, for example "Kuler" - can you see this in the dropdown? This will help us to work out whether this is a problem with Adobe Exchange specifically, or if it is an issue with all extensions in general.
If you can then turn on logging as follows, that would be very helpful:
In Registry Editor, regedit.exe:
HKEY_CURRENT_USER>Software>Adobe>CSXS.4
Increase the LogLevel to 6. Then run Dreamweaver or Photoshop CC - Log files will be generated in: C:\Users\<username>\[AppData]\Local\Temp. If you are in Photoshop the log file will have the filename csxs4-PHSP.log, and for Dreamweaver it will be csxs4-DRWV.log. Please email these log files to me at fgregor at adobe dot com.
Upon searching the forums, there was another user who may have had the same problem as you (http://forums.adobe.com/thread/1291469) - can you check whether C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4 contains CEPServiceManager.exe?
Regarding the "glitchy" issues you mention - this forum is for Adobe Exchange, but if you can provide a bit more information about what is going wrong then we'll try to redirect your question to someone else who can help.
Best regards,
Fraser

I just reinstalled PSE 9 and now my edit effects panel doesn't work when I click on it. Help!

If anybody had this problem and has the solution, please share and I'll be a happy camper again. I have Window Vista. Thanks.

Hi,
When you are saying that the edit effect panel doesn't work, Do you mean there is nothing in the panel (It is an empty panel) or there are items but when clicked nothing is happening ?
Also, Is it the case with Edit Effect panel only or other panels are also behaving in same way ?

Where is the "Scrollable Frame" on the Overlay Creator panel?

I can't seem to find the "Scrollable Frame" on my Overlay Creator panel and now I'm caught in the middle. Is there anything that I missed? I can only see the following:
Hyperlink
Slideshow
Image Sequence
Audio & Video
Panorama
Web Content
Pan & Zoom.

I know you mean the other Bob, but the purpose of that is to have something to align with the edge of the scrollable content.
Without the dummy content you wouldn’t be able to position the content. Try doing it without that and you’ll see the problem.
Bob

Just upped to ML and the Contact panel doesn't enable the selection buttons

Just upped to ML and the Contact panel doesn't enable the selection buttons.
To get my address selection to the e-mail it must be dragged and dropped.

Thanks sberman for reply,
No he hasn't. I've tested this with other contacs. If someone is already in my facebook cantacts and I receieve an email from him, but he hasn't included that email address in his facebook account, if I add this new email to his contact card, his picture frame will not appear in mail app. I can see his both facebook and other email address in the contact card.

JTable Blank Rows When INSERT/DELETE in other panel with same ViewObject

Hi,
Jdev 10.1.2
JClient
2 panels based on same ViewObject in same AM
One panel with Grid UI => JTable
Other panel with Form UI
When I insert or delete a record in the panel with Form UI and return to the panel with JTable blank rows are displayed.
The problem remains even after commiting before returning to JTable panel.
When I activate the execute button in the JTable panel, the display is OK but the currency is lost.
I suppose calling the refresh method when returning to the JTable panel should solve the problem.
Can you please suggest me a server-side/model workaround:
refresh (which option to use ??)
Thanks
Frederic
PS I tried the workaround of thread 10.1.2 JClient binding Error. but that doesn't help.

Same problem with default wizard generated Master-Detail Form.
When in the detail more then 10 rows exist, the scrollbar shows that not all rows are displayed.
If I use the scrollbar to view the last rows they are blank, in order to display them I must activate the next button one time for each additional row.
The workaround is to enter -1 in the range size of the iterator.
But what if the range size is 10.
Is the blank rows display a bug?
OR
Must the scrolling area (size of JScrollPane) be defined according to the range size of the iterator?
If the latter is true:
Can somebody give me some clues on which attributes of the JScrollPane must be set (PreferredSize, MinimumSize ??) and on how to calculate this area: total width & total height if the row height for the table is set to 20?
Your help will be appreciated
Frederic

Don't display Overlay Creator Panel

After the installation of the Folio Producer Tools i can't display the Overlay Creator Panel on my InDesign

I've installed the Folio Producer Tools and the Folio Panel, after the log in in Folio Buider i can't display the new features buttons, like the Overlay Creator panel.
I've tried uninstall/re-install but nothing new happens
What can i do?

Windows control panel doesn't recognize Adobe CC Products.

한글(Korean) :
1년 조금 넘게 어도비 CC 정품을 이용해오고 있습니다.
아시다시피 어도비 CC는 어도비 제품들을 원하는대로 다운로드할 수 있잖아요,
저도 많은 제품들을 다운로드해서 쓰고 있었는데 안쓰는 제품들이 몇개 생겨서 제거하려고 합니다.
그런데 제어판에서는 어도비 CC 제품들(포토샵, 애프터이펙트, 오디션 등등)이 뜨질 않네요.
제어판에서 이 제품들을 인식을 못하는거 같은데, 어도비에 전화해보니 C드라이브 들어가서
폴더를 지우라고 하는데, 그냥 제어판이 인식하게 할 수는 없을까요?
English :
I have used Adobe CC products for almost a year.
As you know, I can download any adobe products what I want through it.
I was using a lot of Adobe products, but now, there are some products
that I won't use anymore. So I'm going to delete them.
But windows' control panel doesn't recognize Adobe CC products(like Photoshop, After Effects, Etc..).
So I called to Adobe Korea customer center. They told me that I can go into C drive and delete folders of Adobe products.
This is not the answer what I exactly want. I want to make the control panel can recognize Adobe CC products.
What should I do?

Creative Cloud help says to uninstall CC apps on a Windows PC to do the following:
Open the Window Control Panel > Programs and Features
Choose an app and click Uninstall/Change
Follow on-screen instructions
This information is NOT correct. Programs and Features does not contain all versions of Adobe software installed via Creative Cloud Desktop. It only shows the most current installation. Photoshop is a great example of why this is so. I currently have five versions of Photoshop installed through my Creative Cloud subscription. Windows has difficulty knowing which version to start, much less which to uninstall because the executable file for each version uses the same name--Photoshop.exe. In terms of designating which file types should be opened by which programs, the problem is equally evident. For example, setting current version Photoshop CC 2014 (version 15.1) as the program to open GIF files is not possible because Windows shows it's already done that with the designated program being Photoshop.exe. Of course, all other versions of Photoshop executable files use the name Photoshop.exe. So, it's not surprising that Windows is confused. But that does not help the rest of us.
The original questioner asked how they could get Windows Programs and Features to list CC applications. I don't think that's possible given the way Adobe has configured and named the executable files that Windows relies on. So, I'd add a question for Adobe: How do I uninstall versions of Photoshop and other CC applications that I no longer use. Programs and Features cannot help me--the programs simply are not listed. So, how does Adobe envision users uninstalling CC apps that don't appear in Programs and Features?

Font panel doesn't appear in mail

Hello everyone
I can't change the fonts in e-mails because the font panel doesn't appear. When I try to show the font panel by selecting "show fonts" from the menu "format", the text in the menu does change to "hide fonts" but the panel still doesn't appear. I've had this problem already while using Tiger and was hoping to get it solved through upgrading to Leopard, which didn't happen.
I'd appreciate your help. Thanks!
PS: I'm in Switzerland and therefore everything on my computer is in german - I am not sure whether the terms "show fonts" and "hide fonts" are what is used in english.

Well that cuts out that line of enquiry.
I am wondering if you imported the problem over from Tiger using Migration Assistant, or whether you have created alterations to your fonts in the past.
Have a look at *Kurt Lang's* very good exposition on fonts in OS X to review any changes you may have made.
http://www.jklstudios.com/misc/osxfonts.html
Another suggestions would be to create a new 'test' account and see how Mail behaves in that, which would isolate whether it is a problem specific to your account or to your Mail application in general.

Qosmio F50-10z' s front operation panel doesn't work

My front operation panel doesn't work. I have tried to recovery my computer and reinstall the VAP but it still doesnt work.
I want to why...

Hi!
What do you mean with if it doesnt work?
If you try to install a newer version of Toshiba Value Added Package you should remove the old version first. Reboot the notebook and install the newer one.
Last but not least try to update the BIOS. You can find it on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

Apps panel doesn't show installed Creative Cloud apps

None of my apps are showing as installed in the creative cloud application
Adobe are aware this issue exists, but their solution doesn't work ---> Apps panel doesn't show installed Creative Cloud apps
Can't say I'm surprised, Anybody knows how to really solve this problem?

It seems that Adobe doesn't think it's important to check for previous apps installation, and expects the user to manually match the creative cloud language would be installed apps language
So if you see that there is no app installed in your creative cloud just check their language settings in Preferences > Apps > Apps language.

HAVE SOUND- FRONT PANEL DOESN'T WO

hmmm, okay. Last night I installed the "Beta" driver and the EAX driver. I now have sound but my front panel doesn;t work. For some reason XP doesn't see the panels devices properly and lists all of them on the panel board as UNKNOWN devices. Is there some other driver set I need to install the front panel?

Hello tonitpp:
Unfortunately, the "Run VI" method only executes the vi and it will not open the front panel.
If you want to open the front panel, use the "Open FP" method, which is also located on the same class.
I hope this helps.

Apps panel doesn't show Lightroom installed

I've had lightroom 5.5 installed through the apps panel previously. Apps now panel doesn't show Lightroom installed.
I've tried both these solutions, neither have worked:
Apps panel doesn't show installed Creative Cloud apps
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#UpdatesNotShowing
Any ideas how I can resolve this? Thanks.

Solution can be found here:
Lightroom keeps disappearing from my installed apps
Apparently that behaviour is normal. Just use the Install option instead of update.

Activated panel doesn't overlay other panel

Similar Messages

Maybe you are looking for