Activating a Particular Module in SAP Menu?

In our sap menu we usually see different folders for different modules such financial accounting. Human capital management etc. I can't not see that folder of public sector management {PSM} module in my front end as well as spro backend sap menu. How can i activate that menu of that module. My Version is ECC 6.0 EHP4. THanks

Hi Prasad
Thank you so much. It has good information.
As Naveen Pandrangi's blog
XI : RFCAdapter ReConnect Issue
"when the end system comes up, calls from XI would be successful. RFC Adapter would now check the connection for every message instead of only once when the communication channel is updated."
Here small question is what about the old messages that were failed due to Connection Failure or SAP down.
Please try to comment.
Thanks in advance
Ramesh

Similar Messages

Adding Tcodes to SAP menu path

How to add custom T codes and sap T codes to a particular folder in SAP menu path?
Here I would like to display new transaction codes in below SAP menu path . SAP menu path will be the initial screen of SAP.
SAP menu->Information system->finance account->general ledger-> daily.
Here I would like to display my transaction codes under node DAILY. Please reply to me .

Hi,
1) Go to SE43.
2) Give name to area menu (ZTEST) and description (SAP menu) to the area menu.
3) Click "Add entry as subnode". In popup give "Information system" in the text.
4) Click "Information system" and then click "Add entry as subnode" and give "finance account" as text in the popup.(same procedure for general ledger and daily).
5) Click "Daily" and then click "Add entry as subnode" and provide your text and tcode this time.
Regards

Connection to SAP R/3 or to particular module..n how??

i m new to Enterprise Portal and m bit confused.. i knw that EP is used to connect to SAP system thru Single Sign ON....
for my project we will be using ESS and MSS buisness package.
Thus we need to connect our Portal to nly SAP R/3 sytem...or v connect to particular module...considering my project i need to connect to SAP HR module.. so how do i configure my portal to only SAP HR module..or creating only SAP R/3 system..i.e the way we normally connect to SAP R/3 from Portal content studio will do..??
...if any one could explain it conceptually will surely b awarded POINTS..
Edited by: jigar oza on Jul 29, 2008 10:46 AM

Hi Jigar,
as you know about SSO it is nice, SSO is used to connect to backend (System) you can say R/3. Where as system contains many modules.
Create one system in portal which will connect to your desired backend using SSO. Once it succeeds.
Then create an SAP transaction iview from iview template which will point to this created sytem.
You must be having some t-code to directly access your module in the R/3.
You have to enter this t-code in the Transaction code property of the iview. After creating this iview and proper SSO settings, when you pre-view this iView it will directly open the first screen of your module/application in the backend system.
let me know if you face any issues in this.
also see my postings in following threads:-
Re: How to Connect Backend R/3 system to EP 2004S
Re: How to configure SAP R3 system to Portal
Regards,
Yogesh...

EH&S: EA-PLm activation. EH&S missing under SAP menu

Hi all,
The EA-PLM extension (in a development environment)was activated (not by me) but EH&S folder is missing under logistics in the SAP menu.
I had also made this activation (by me) before in a sandbox environment and I was able to see EH&S in SAP menu without problem.
In Tcode SCPR20PR, I've checked EA-PLM-IMG, EA-PLM-MENU and EA-PLM-AKH and the logs show all green statuts.
So, do you have any idea to explain why I am not able to see EH&S in the SAP menu and to resolve this problem?
Thank's,
Best Regards,
Ludovic

Hello
it seems to be a problem which is well known in the EH&S world. I have done an inquiry and found these pages:
http://www.saptechies.com/faq-dangerous-goods-problems-after-ehs-upgrade/
which provides this usefuil help (hopefully; i did not control):
"If the EA-PLM switch is active, however the menu path is still not displayed, follow the instructions contained in Note 855959."
Furtheremore I found this link:
http://www.akiboks.com/text/93b25125-f5ab-48ef-a59a-76d4ccb9b841/1/pdf
Hope that this helps.
With best regards
C:B.

How to deactivate the "left top corner SAP menu" for a particular screen

Hello Friends..
We have a requirement to implement a "Non Disclosure Agreement(NDA)" for one of our SAP systems. NDA screen will have 2 buttons, "I agree" and "I disagree" which pops up when you log in to the system(after filling up our user id and password and hit enter). If we click on "I agree", it will allow you to continue with the log in and takes you to sap easy access screen. If we click on "I disagree", then session will be terminated.
But, the NDA window which is being popped up is also a SAP screen which has SAP menu on top left corner. Without clicking on "I agree" or "I disagree" and if we try to select "Create session" option in SAP menu on top left corner, then it is taking us inside SAP(sap easy access screen) by bypassing the buttons.
Request your help on how to deactivate the "left top corner SAP menu" for this particular NDA screen. (SAP menu to be available with other screens and it should not be available just for the window which is being popped up after log in and before SAP easy access)
Many Thanks in advance..
Vinay

Hi Vinay,
Try this if it works -
in your first screen for the NDA screen, on the memnu bar select - EXTRAS - SETTINGS - Select the check box 'Do not display menu, only display favourites'.
on calling the next screen , disable this option in the PBO of the screen.
Try and let me know if it works.
Thanks & Regards, Swapnil Mishra

How can i get the list of all tcode used by user of particular module

Hi,
How can i get the list of all tcode used by user of particular module (e.g FI , MM ,PP) within year .
Regards
Vikram

Login to your SAP System
Run TCode SE16
Type Table Name : TSTCT
Press F7 Key (Table Contents )
Go to Settings in menu bar
Select User Parameters
Under Keyword select Field Label and press green check mark
Select your criteria in Data Browser and execute
You will see all t codes in there
Regards,
Yogesh

User Menu Like SAP menu

Hello Guys,
I have to create a z Menu like SAP menu which invoke after some z t code.
In this menu I have to add all z t code module wise which will work from there itself. like.
Data Menu
        MM module
              zmmp1 : Bin Card report
        PP Module
             zppp1 : Daily production report.
like that Please provide me the help
Thanks
Swati.....

Hi,
I think you should design your menu in menu painter ie transaction code se41 and give the module wise transaction codes as the options on the menu created , when user clicks on the menu an event is triggere and sy-ucomm contains the code of the option clicked. you can then write impementation as call transaction a particular transaction code depending on the option clicked.
Regards,
Sunmit

Crystal Report menu-item not visible on SAP menu of client

SAP 2007A SP:00 PL:38
Crystal Report 2008 (on start menu)
Crystal Report 2.0.0.6
1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
2. Installed Crystal Report on one of the clients and it works fine in same way.
3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5 run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
b) However, in Add-on Manager, Crystal Report does not show at all.
c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
d) OS is Microsoft XP.
How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
Thanks, Ajay Audich

Hi,
1) On Add-Remove Programs on the client, I see the following:
Crystal Reports 2008 Runtime
Crystal Reports Basic 2008 for SAP Business One
Microsoft.NET Framework 1
Microsoft.NET Framework 2.0 Service Pack 2
Microsoft.NET Framework 3.0 Service Pack 2
Microsoft.NET Framework 3.5 SP1
SAP Business One Crystal Reports 2.0.0.6
2) The settings are:
Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
User Preferences Tab-User RT-Preference is set to Default.
On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
3) The user RT on the client is a super-user.
Thanks.

Runnning report from Sap menu screen

hi
my client is running loan management module. in some transaction when he presses a button on the sap menu ( something called cash flow) , SAP generates a table with all calculated values and stuff ( like a report ) . they want a different output format . how can i write a custom report that takes all the values from the transaction and gets executed when he presses the same button on the menu but with the format they want.
( they do not want to make this a standalone report)

What sort of "report" does this transaction produce? Is it a list display(WRITE statements) or an ALV grid. If it is a list display, it would be possible to write a custom program, which SUBMITs the standard report, export the resulting list to memory, import that list into memory, and pick it apart and reformat to the way you want. This is all possible, but it should be a report program and produce a list display.
REgards,
RIch Heilman

SAP menu does not appear?

In windows gui of our CRM system, SAP menu button is inactive, So I can not access SAP menu.
But other user accounts can access SAP menu using this button.
This button is active for their accounts.
I can not see SAP menu also when I go to S000 tcode.
What can be my problem?
Thanks.

Check if other users have different profiles than you or some other parameters. Also check that your user is of type "dialog user". If all is ok, then my only suggestion is to add to yourself pfcg that I suggested.

Sap menu accounting missing

Dear All
In sap menu accounting is missing -other modules like logistics and human resources can
be seen-
till yesterday we are able to post accounting entries through sap menu-accounting-
from today onwards I am not able see
How to activate accounting in sap menu

Hello,
maybe somebody has modified the s000 - menu?
if you have other systems where the sap menu is still ok, you can quickly transport the menu from there (SE43). But maybe only the area menu, where that node is contained has been changed, then you need to transport that area menu only.
b.rgds, Bernhard

ESS from SAP menu

Hi,
Can the ESS transactions PZ11 etc be accessed directly from the SAP menu?
If we don't have the portal or WAS, how can we enable employees (ess license holders) to log into the R/3 (4.7) and access the self service transactions?
Regards

Hi,
I'm glad to hear that. I'm on 4.7
Will basis be responsible for setting up ITS?
How are the services going to be activated for ITS? for example 'employee absence'. I'v seen it being done through solution manager.
thanks

How to code a predifined function module in sap ,in se37.

can any one tell me how to code a predifined function module in sap ,in se37.it's an immediate requirement.if u give a brief description it'll do.

Hi Henry,
There are two possible ways in which I can interpret your question.
1. You want to create a new Function Module in SE37. you will have to refer to the <a href="http://help.sap.com/saphelp_47x200/helpdata/en/d1/801e9a454211d189710000e8322d00/frameset.htm">Function Builder</a> tutorial for that.
2. You want to use an existing function module in your program. In the code of your program in SE38, click the button <i>Pattern</i>. On the pop-up, give the name of the function module that you wish to use in your program.
Regards,
Anand Mandalika.

Is it possible to open a query from sap menu favorite to excel?

Hi all
I have added a query in favorite . From the favorite in sap menu , i want to open the query in excel.
Is is possible?
Currently the query open in web.
Please revert back if you have any idea
Thanks
ajay

Hi Daya Sagar,
You said the query saved in favorite from query designer will open in browser and the one saved from analyzer will open in bex excel. But it does not work for me. It saves as web icon and both query is opening in browser.
Hi All,
The different story for me is I have problem of opening the web browser by running a query from favorite or user menu because in the url I have different Client. Is there any way to fix this url problem. Any one in this thread can help me on this issue and will be awarded. Thanks.
Raj

How to debugg particular statement in sap script

hi friends,
i want to know How to debugg particular statement in sap script.
plz reply.
thanks in advance,
regards
bhaskar

hi
execute rstxdbug to activate script debugger...once the driver program reaches open_form, a popup box will come where u can mention the name of a command, call functinon, text element, etc to place a break point...once it gets into the debugging mode, double click on any line to set a break point, after that pressing f8 will get you to that line
if helpful, reward
Sathish. R

Activating a Particular Module in SAP Menu?

Similar Messages

Maybe you are looking for