Activating auto PO Check Box in the purchasing view for plant level.

Hi Techies,
Right now i have an issue related to auto PO check box in the purchasing view for the plant level. There are three plants A,B,C.. For the plants A and B the automatic PO check box is visible and the user is able to provide input values. But when it comes to plant C the auto PO field is not available and hence the user is unable to provide input for auto PO.
Is there any configuration to be done to activate the auto PO check box in the purchasing view in the material master with respect to plant C?
If so could you please guide me with the settings?
Thanking you in advance.
Regards,
Gopalakrishnan.S
Edited by: krishu100 on Jul 13, 2011 2:25 AM

Hi Techies thanks for you all info.
Now today i just tried to created a new HALB Material in the plant C which i had issues yesterday. But when i created today a new material the Auto PO feild is available for entry. THen i tried to go to the material which i created yesterday for editing it. But i was unable to do it.
I checked the transactions which most of you referred(Very Useful). I found that all the plant s had the same screen selction setting and set as Opt Entry. The field screen referrence for MM01, MM02 Transaction s are also set as opt entry. The screen reference for HALB is also set as Opt entry. Still i m not able to find the field auto PO in the purchasing field.
So does it mean that a material once created without auto PO enabled or visible can never be updated after that? But i think its not the case and we should be able to edit it(correct me if im wrong).
Really having my fingers crossed to find a solution for this issue.
Regards,
Gopalakrishnan.S

Similar Messages

  • OM: Disable auto refresh check box in Quick Sales Order Form

    hi,everyone
    In screen [Quick Sales Order Form],
    we want to let the auto refresh check box always be checked and can not be updated with Form personalize.
    I didn't find the item in this form,
    and i konw that there is a value which defined in the Profile : [OM: Quick Sales Order Form: Auto Refresh](ONT_QUICK_OE_AUTO_REFRESH).
    Can anyone give me some suggestions?
    thx for ur help.

    hi,Pradeep
    Thanks for your reply.
    Actualy,the profile "OM: Quick Sales Order Form: Auto Refresh" has been setted into 'Line' firstly as we want to auto-refresh order lines.
    So the 'auto refesh' checkbox is checked with default value in the screen,
    but the order line would not be auto-refreshed when user uncheck the checkbox manually.
    So we want to disable or invisible the 'auto refesh' item in the screen with form personalize,
    the problem is i can not find the item or the block in the form.
    Or is there any suggestions to archive this?
    Can you please help me?
    Thanks,
    Leno
    Edited by: Leno Sun on 2013/05/07 19:35

  • Creation of check boxes in the ALV report

    Hi All,
        With all your support i'm gaining more knowledge, thank's for that,
    in my ALV report i want to create a check boxes  if the  check boxs are elected and processed then the particular records is going to disappear,
    How can we do this,
    Thanks & Regards
    Krishna

    hi,
    i have done this one.please check my code.
    TYPE-POOLS : slis.
    TYPES : BEGIN OF st_ekko,
              ebeln TYPE ekko-ebeln,    "Purchasing Document Number
              bstyp TYPE ekko-bstyp,    "Purchasing Document Category
              bsart TYPE ekko-bsart,    "Purchasing Document Type
              aedat TYPE ekko-aedat,    "record created on
              ernam TYPE ekko-ernam,    "Person who Created the Object
              check(1),
            END OF st_ekko.
    TYPES : BEGIN OF st_ekpo,
             ebeln TYPE ekko-ebeln,
             ebelp TYPE ekpo-ebelp,    "Item Number of Purchasing Document
             ematn TYPE ekpo-ematn,    "Material number
             matkl TYPE ekpo-matkl,    "Material group
             netpr TYPE ekpo-netpr,    "Net price in purchasing document
            END OF st_ekpo.
    TYPES : BEGIN OF st_ebeln,
             ebeln TYPE ekpo-ebeln,
            END OF st_ebeln.
    TYPES : BEGIN OF st_eine,
             ebeln TYPE ekko-ebeln,
             ekorg TYPE eine-ekorg,
             ekgrp TYPE eine-ekgrp,
            END OF st_eine.
    TYPES : BEGIN OF st_check,
             check(1),
            END OF st_check.
    DATA : it_ekpo TYPE STANDARD TABLE OF st_ekpo,
           it_ekko TYPE STANDARD TABLE OF st_ekko,
           wa_ekko LIKE LINE OF it_ekko,
           it_fieldcat TYPE slis_t_fieldcat_alv,
           wa_fieldcat LIKE LINE OF it_fieldcat,
           wa_layout TYPE slis_layout_alv,
           it_events  TYPE slis_t_event,
           st_event LIKE LINE OF it_events,
           it_listheadr TYPE slis_t_listheader ,
           wa_listheadr LIKE LINE OF it_listheadr,
           st_printparams TYPE slis_print_alv,
           it_sortinfo TYPE slis_t_sortinfo_alv,
           wa_sortinfo LIKE LINE OF it_sortinfo,
           it_ekposortinfo TYPE slis_t_sortinfo_alv,
           wa_ekposortinfo LIKE LINE OF it_ekposortinfo,
           it_filter TYPE slis_t_filter_alv,
           it_ebeln TYPE STANDARD TABLE OF st_ebeln,
           it_eine TYPE STANDARD TABLE OF st_eine,
           wa_eine TYPE st_eine,
           it_popup TYPE STANDARD TABLE OF st_eine,
           wa_popup TYPE st_eine,
           it_check TYPE STANDARD TABLE OF st_check,
           wa_check TYPE st_check.
    DATA : v_ebeln TYPE ekko-ebeln.
                           SELECTION-SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE tit.
    SELECT-OPTIONS: so_ebeln FOR v_ebeln OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b.
                             INITIALIZATION
    INITIALIZATION.
      tit = text-000.
                             AT SELECTION-SCREEN ON
    AT SELECTION-SCREEN ON so_ebeln.
      PERFORM validate_ebeln.
                             START-OF-SELECTION
    START-OF-SELECTION.
      PERFORM get_ekko_data.
      PERFORM get_eine_data.
                             END-OF-SELECTION
    END-OF-SELECTION.
      PERFORM populate_fieldcat1.
      PERFORM populate_layout.
      PERFORM get_eventlist.
      PERFORM get_ekkosortinfo.
      PERFORM ekkodisplay_onalv.
    *&      Form  POPULATE_FIELDCAT1
    FORM populate_fieldcat1.
      wa_fieldcat-fieldname = 'EBELN'.
      wa_fieldcat-seltext_l = text-004.
      wa_fieldcat-no_zero = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'BSTYP'.
      wa_fieldcat-seltext_l = text-005.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'BSART'.
      wa_fieldcat-seltext_l = text-006.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'AEDAT'.
      wa_fieldcat-seltext_l = text-007.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'ERNAM'.
      wa_fieldcat-seltext_l = text-008.
      APPEND wa_fieldcat TO it_fieldcat.
    ENDFORM.                    "POPULATE_FIELDCAT1
    *&      Form  populate_fieldcat2
    FORM populate_fieldcat2 .
      CLEAR wa_fieldcat.
      CLEAR it_fieldcat.
      REFRESH it_fieldcat.
      wa_fieldcat-fieldname = 'EBELN'.
      wa_fieldcat-seltext_l = text-004.
      wa_fieldcat-hotspot   = 'X'.
    wa_fieldcat-no_zero = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'EBELP'.
      wa_fieldcat-seltext_l = text-009.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'EMATN'.
      wa_fieldcat-seltext_l = text-010.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'MATKL'.
      wa_fieldcat-seltext_l = text-011.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'NETPR'.
      wa_fieldcat-seltext_l = text-012.
      wa_fieldcat-datatype =  'CURR'.            "Obligatory to perform SUM
      wa_fieldcat-do_sum    = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
    ENDFORM.                                     "populate_fieldcat2
    *&      Form  GET_EVENTLIST
    FORM get_eventlist.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 0
        IMPORTING
          et_events       = it_events[]
        EXCEPTIONS
          list_type_wrong = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      READ TABLE it_events WITH KEY name = slis_ev_pf_status_set INTO st_event.
      IF sy-subrc EQ 0.
        st_event-form = 'SET_PF_STATUS1'.
        APPEND st_event TO it_events.
        CLEAR st_event.
      ENDIF.
      READ TABLE it_events WITH KEY name = slis_ev_end_of_page INTO st_event.
      IF sy-subrc EQ 0.
        st_event-form = 'END_OF_PAGE'.
        APPEND st_event TO it_events.
        CLEAR st_event.
      ENDIF.
    ENDFORM.                    "GET_EVENTLIST
    *&      Form  ekpodisplay_onalv
    FORM ekpodisplay_onalv .
      IF it_ekpo[] IS INITIAL.
        MESSAGE 'NO DATA FOUND' TYPE 'I'.
      ELSE.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
         i_callback_program                = sy-repid
         i_callback_pf_status_set          = 'SET_PF_STATUS'
         i_callback_user_command           = 'AT_USER_COMMAND1'
         i_callback_top_of_page            = 'TOP_OF_PAGE'
        I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
        I_CALLBACK_HTML_END_OF_LIST       = ' '
        I_STRUCTURE_NAME                  = I_STRUCTURE_NAME
        I_BACKGROUND_ID                   = ' '
        I_GRID_TITLE                      = I_GRID_TITLE
        I_GRID_SETTINGS                   = I_GRID_SETTINGS
           is_layout                         = wa_layout
           it_fieldcat                       = it_fieldcat
        IT_EXCLUDING                      = IT_EXCLUDING
        IT_SPECIAL_GROUPS                 = IT_SPECIAL_GROUPS
         it_sort                           = it_ekposortinfo[]
        IT_FILTER                         = IT_FILTER
        IS_SEL_HIDE                       = IS_SEL_HIDE
        I_DEFAULT                         = 'X'
        I_SAVE                            = ' '
        IS_VARIANT                        = IS_VARIANT
        it_events                         = it_events
        IT_EVENT_EXIT                     = IT_EVENT_EXIT
        IS_PRINT                          = IS_PRINT
        IS_REPREP_ID                      = IS_REPREP_ID
        I_SCREEN_START_COLUMN             = 0
        I_SCREEN_START_LINE               = 0
        I_SCREEN_END_COLUMN               = 0
        I_SCREEN_END_LINE                 = 0
        I_HTML_HEIGHT_TOP                 = 0
        I_HTML_HEIGHT_END                 = 0
        IT_ALV_GRAPHICS                   = IT_ALV_GRAPHICS
        IT_HYPERLINK                      = IT_HYPERLINK
        IT_ADD_FIELDCAT                   = IT_ADD_FIELDCAT
        IT_EXCEPT_QINFO                   = IT_EXCEPT_QINFO
        IR_SALV_FULLSCREEN_ADAPTER        = IR_SALV_FULLSCREEN_ADAPTER
      IMPORTING
        E_EXIT_CAUSED_BY_CALLER           = E_EXIT_CAUSED_BY_CALLER
        ES_EXIT_CAUSED_BY_USER            = ES_EXIT_CAUSED_BY_USER
          TABLES
            t_outtab                          = it_ekpo
       EXCEPTIONS
         program_error                     = 1
         OTHERS                            = 2           .
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
    ENDFORM.                    "ekpodisplay_onalv
    *&      Form  SET_PF_STATUS1
    FORM set_pf_status1 USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'MENU' excluding rt_extab.      "Copy from SALV .
    ENDFORM.                                        "SET_PF_STATUS1
    *&      Form  SET_PF_STATUS
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'STANDARD' excluding rt_extab.  "Copy from SALV .
    ENDFORM.                                        "SET_PF_STATUS
    *&      Form  AT_user_command
    FORM at_user_command  USING r_ucomm LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
      CASE r_ucomm.
        WHEN '&IC1'.
          IF rs_selfield-fieldname EQ 'EBELN'.
            READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
            SELECT ebeln ebelp ematn matkl netpr
              FROM ekpo
              INTO TABLE it_ekpo
             WHERE ebeln EQ wa_ekko-ebeln.
            PERFORM populate_fieldcat2.
            PERFORM populate_layout2.
            PERFORM get_ekposortinfo.
            PERFORM ekpodisplay_onalv.
          ELSE.
            MESSAGE i020(z50871msg) WITH text-013.
          ENDIF.
        WHEN 'SE16'.
          CALL TRANSACTION 'SE16'.
        WHEN 'SE37'.
          CALL TRANSACTION 'SE37'.
        WHEN 'DISP'.
          PERFORM get_popupdata.
          PERFORM get_popupfcat.
          PERFORM display_popup.
      ENDCASE.
    ENDFORM.                                            "AT_user_command
    *&      Form  TOP_OF_PAGE
    FORM top_of_page.
      REFRESH it_listheadr.
      wa_listheadr-typ = 'H'.
      wa_listheadr-info = text-001.
      APPEND wa_listheadr TO it_listheadr.
      CLEAR wa_listheadr.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = it_listheadr[]
          i_logo             = 'ENJOYSAP_LOGO'.    "From OAER transaction
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  build_print_params
    FORM build_print_params.
      st_printparams-reserve_lines = '3'.               "Lines reserved for footer
      st_printparams-no_coverpage = 'X'.
    ENDFORM.                    "build_print_params
    *&      Form  end_of_page
    FORM end_of_page.
      REFRESH it_listheadr.
      wa_listheadr-typ = 'H'.
      wa_listheadr-info = sy-pagno.
      APPEND wa_listheadr TO it_listheadr.
      CLEAR wa_listheadr.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = it_listheadr[].
    ENDFORM.                                            "end_of_page
    *&      Form  GET_EKPOSORTINFO
    FORM get_ekposortinfo.
      wa_ekposortinfo-up = 'X'.
      wa_ekposortinfo-spos = 1.
      wa_ekposortinfo-fieldname = 'EBELP'.
      wa_ekposortinfo-tabname = 'EKPO'.
      APPEND wa_ekposortinfo TO it_ekposortinfo.
      CLEAR wa_ekposortinfo.
      wa_ekposortinfo-up = 'X'.
      wa_ekposortinfo-spos = 2.
      wa_ekposortinfo-fieldname = 'EMATN'.
      wa_ekposortinfo-tabname = 'EKPO'.
      APPEND wa_ekposortinfo TO it_ekposortinfo.
      CLEAR wa_ekposortinfo.
    ENDFORM.                                           "GET_EKPOSORTINFO
    *&      Form  POPULATE_LAYOUT
    FORM populate_layout.
      wa_layout-colwidth_optimize = 'X'.               "column width
      wa_layout-zebra = 'X'.
    wa_layout-no_hline = 'X'.
    wa_layout-no_vline = 'X'.
    wa_layout-cell_merge = 'X'.
      wa_layout-box_fieldname = 'CHECK'.
      wa_layout-box_tabname = 'IT_EKKO'.
      wa_layout-window_titlebar = 'PURCHASE ORDER HEADER DETAILS'.
    ENDFORM.                                         "POPULATE_LAYOUT
    *&      Form  get_EKKOsortinfo
    FORM get_ekkosortinfo.
      wa_sortinfo-up = 'X'.
      wa_sortinfo-spos = 1.
      wa_sortinfo-fieldname = 'EBELN'.
      wa_sortinfo-tabname = 'EKKO'.
      APPEND wa_sortinfo TO it_sortinfo.
      CLEAR wa_sortinfo.
      wa_sortinfo-up = 'X'.
      wa_sortinfo-spos = 2.
      wa_sortinfo-fieldname = 'BSTYP'.
      wa_sortinfo-tabname = 'EKKO'.
      APPEND wa_sortinfo TO it_sortinfo.
      CLEAR wa_sortinfo.
      wa_sortinfo-up = 'X'.
      wa_sortinfo-spos = 3.
      wa_sortinfo-fieldname = 'AEDAT'.
      wa_sortinfo-tabname = 'EKKO'.
      APPEND wa_sortinfo TO it_sortinfo.
      CLEAR wa_sortinfo.
    ENDFORM.                                         "get_EKKOsortinfo
    *&      Form  EKKODISPLAY_ONALV
    FORM ekkodisplay_onalv.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          i_callback_program       = sy-repid
          i_callback_pf_status_set = 'SET_PF_STATUS1'
          i_callback_user_command  = 'AT_USER_COMMAND'
          is_layout                = wa_layout
          it_fieldcat              = it_fieldcat
          it_sort                  = it_sortinfo[]
          it_filter                = it_filter
          it_events                = it_events[]
        TABLES
          t_outtab                 = it_ekko[]
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                                            "EKKODISPLAY_ONALV
    *&      Form  validate_ebeln
    FORM validate_ebeln.
      SELECT  ebeln
          FROM ekpo
          INTO TABLE it_ebeln
          WHERE ebeln IN so_ebeln.
      IF sy-subrc NE 0.
        MESSAGE e020(z50871msg) WITH text-014.
      ENDIF.
    ENDFORM.                                           "validate_ebeln
    *&      Form  populate_layout2
    FORM populate_layout2 .
      CLEAR wa_layout.
      wa_layout-colwidth_optimize = 'X'.               "column width
    wa_layout-zebra = 'X'.
    wa_layout-no_hline = 'X'.
    wa_layout-no_vline = 'X'.
    wa_layout-cell_merge = 'X'.
      wa_layout-window_titlebar = 'PURCHASE ORDER DETAILS SECOND SCREEN'.
    ENDFORM.                    " populate_layout2
    *&      Form  GET_POPUPDATA
    FORM get_popupdata .
      LOOP AT it_ekko INTO wa_ekko WHERE check = 'X'.
        READ TABLE it_eine INTO wa_eine WITH KEY ebeln = wa_ekko-ebeln.
        IF sy-subrc NE 0.
          MESSAGE i020(z50871msg) WITH text-015 wa_ekko-ebeln .
        ELSE.
          wa_popup-ebeln = wa_eine-ebeln.
          wa_popup-ekorg = wa_eine-ekorg.
          wa_popup-ekgrp = wa_eine-ekgrp.
          APPEND wa_popup TO it_popup.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " GET_POPUPDATA
    *&      Form  GET_POPUPFCAT
    FORM get_popupfcat .
      CLEAR wa_fieldcat.
      REFRESH it_fieldcat.
      wa_fieldcat-fieldname = 'EBELN'.
      wa_fieldcat-seltext_l = text-004.
      wa_fieldcat-hotspot   = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'EKORG'.
      wa_fieldcat-seltext_l = text-016.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'EKGRP'.
      wa_fieldcat-seltext_l = text-017.
      APPEND wa_fieldcat TO it_fieldcat.
    ENDFORM.                    " GET_POPUPFCAT
    *&      Form  DISPLAY_POPUP
    FORM display_popup .
      LOOP AT it_ekko INTO wa_ekko WHERE check EQ 'X'.
        wa_check-check = wa_ekko-check.
        APPEND wa_check TO it_check.
      ENDLOOP.
      IF it_check[] IS INITIAL.
        MESSAGE i020(z50871msg) WITH text-018.
      ENDIF.
      IF NOT it_popup[] IS INITIAL.
        CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
          EXPORTING
            i_title              = text-003
            i_allow_no_selection = 'X'
            i_scroll_to_sel_line = 'X'
            i_tabname            = 'IT_POPUP'
            it_fieldcat          = it_fieldcat
            i_callback_program   = sy-repid
          TABLES
            t_outtab             = it_popup
          EXCEPTIONS
            program_error        = 1
            OTHERS               = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
      REFRESH it_check.
      REFRESH it_popup.
    ENDFORM.                    " DISPLAY_POPUP
    *&      Form  get_ekko_data
    FORM get_ekko_data .
      SELECT ebeln bstyp bsart aedat ernam
          FROM ekko
          INTO CORRESPONDING FIELDS OF TABLE it_ekko
         WHERE ebeln IN so_ebeln.
      IF sy-subrc NE 0.
        MESSAGE e020(z50871msg) WITH text-019.
      ENDIF.
    ENDFORM.                    " get_ekko_data
    *&      Form  get_eine_data
    FORM get_eine_data .
      SELECT ebeln  ekorg ekgrp
        FROM eine
        INTO TABLE it_eine
       WHERE ebeln IN so_ebeln.
    ENDFORM.                    " get_eine_data
    *&      Form  at_user_command1
    FORM at_user_command1  USING r_ucomm LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
        CASE r_ucomm.
        WHEN 'SE16'.
          CALL TRANSACTION 'SE16'.
        WHEN 'SE37'.
          CALL TRANSACTION 'SE37'.
      ENDCASE.
    regards,
    pavan t.

  • How to Prepopulate check boxes in the process form

    Hi All,
    I need to prepopulate "Change Password at next login" in the AD Process Form. i.e. if some one select this check box in the user creation form and create a user, i need to prepopulate it in the AD process Form. Currently, it is not prepopulated. So, it is not updated on the Active Directory. I'm using AD Connector pack 9.1.1 .
    I need to prepopulate the "User must change the password at next logon" check box in the AD Process Form. I have done the prepopulate on text fields. They are working fine.
    But, stuck with this check box prepopulation.....
    Can anyone help me on this issue....
    Regards,
    Chaturanga
    Edited by: chaturanga on Sep 9, 2009 2:35 PM

    Even if you get the checkbox right it is not entirely clear that the connector will read the box correctly. It all depends on how the connector code was written.
    An alternative is to set the LDAP attribute through a custom connector. Email me if you want example code for this.
    Best regards
    -Martin

  • Display of check box as the output in the ALV

    Hi Experts,
    Please guide me with the steps of displaying the check box as the output of an ALV report
    thanks

    Hi,
    Check this program: BALVSD01.
    Check this code:
    *& Report ZAK_ALV
    REPORT ZAK_ALV line-count 10.
    TABLES: ekko.
    type-pools: slis. "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
    ck type c,
    ebeln TYPE ekpo-ebeln,
    ebelp TYPE ekpo-ebelp,
    statu TYPE ekpo-statu,
    aedat TYPE ekpo-aedat,
    matnr TYPE ekpo-matnr,
    menge TYPE ekpo-menge,
    meins TYPE ekpo-meins,
    netpr TYPE ekpo-netpr,
    peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
    wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
    gd_tab_group type slis_t_sp_group_alv,
    gd_layout type slis_layout_alv,
    gd_repid like sy-repid,
    gt_events type slis_t_event,
    gd_prntparams type slis_print_alv.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform build_events.
    perform build_print_params.
    perform display_alv_report.
    *& Form BUILD_FIELDCATALOG
    Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
    There are a number of ways to create a fieldcat.
    For the purpose of this example i will build the fieldcatalog manualy
    by populating the internal table fields individually and then
    appending the rows. This method can be the most time consuming but can
    also allow you more control of the final product.
    Beware though, you need to ensure that all fields required are
    populated. When using some of functionality available via ALV, such as
    total. You may need to provide more information than if you were
    simply displaying the result
    I.e. Field type may be required in-order for
    the 'TOTAL' function to work.
    fieldcatalog-fieldname = 'CK'.
    fieldcatalog-seltext_m = 'CHECKM BOX'.
    fieldcatalog-col_pos = 0.
    fieldcatalog-outputlen = 10.
    fieldcatalog-CHECKBOX = 'X'.
    fieldcatalog-EDIT = 'X'.
    fieldcatalog-key = ''.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'EBELN'.
    fieldcatalog-seltext_m = 'Purchase Order'.
    fieldcatalog-col_pos = 0.
    fieldcatalog-outputlen = 10.
    fieldcatalog-emphasize = 'X'.
    fieldcatalog-key = 'X'.
    fieldcatalog-no_zero = 'X'.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'EBELP'.
    fieldcatalog-seltext_m = 'PO Item'.
    fieldcatalog-col_pos = 1.
    fieldcatalog-checkbox = 'X'.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'STATU'.
    fieldcatalog-seltext_m = 'Status'.
    fieldcatalog-col_pos = 2.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'AEDAT'.
    fieldcatalog-seltext_m = 'Item change date'.
    fieldcatalog-col_pos = 3.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'MATNR'.
    fieldcatalog-seltext_m = 'Material Number'.
    fieldcatalog-col_pos = 4.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'MENGE'.
    fieldcatalog-seltext_m = 'PO quantity'.
    fieldcatalog-col_pos = 5.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'MEINS'.
    fieldcatalog-seltext_m = 'Order Unit'.
    fieldcatalog-col_pos = 6.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'NETPR'.
    fieldcatalog-seltext_m = 'Net Price'.
    fieldcatalog-col_pos = 7.
    fieldcatalog-outputlen = 15.
    fieldcatalog-do_sum = 'X'.
    fieldcatalog-datatype = 'CURR'.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'PEINH'.
    fieldcatalog-seltext_m = 'Price Unit'.
    fieldcatalog-col_pos = 8.
    append fieldcatalog to fieldcatalog.
    clear fieldcatalog.
    endform. " BUILD_FIELDCATALOG
    *& Form BUILD_LAYOUT
    Build layout for ALV grid report
    form build_layout.
    gd_layout-no_input = 'X'.
    gd_layout-colwidth_optimize = 'X'.
    gd_layout-totals_text = 'Totals'(201).
    gd_layout-totals_only = 'X'.
    gd_layout-f2code = 'DISP'. "Sets fcode for when double
    "click(press f2)
    gd_layout-zebra = 'X'.
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text = 'helllllo'.
    endform. " BUILD_LAYOUT
    *& Form DISPLAY_ALV_REPORT
    Display report using ALV grid
    form display_alv_report.
    gd_repid = sy-repid.
    call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
    i_callback_program = gd_repid
    i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
    i_callback_user_command = 'USER_COMMAND'
    i_grid_title = outtext
    is_layout = gd_layout
    it_fieldcat = fieldcatalog[]
    it_special_groups = gd_tabgroup
    it_events = gt_events
    is_print = gd_prntparams
    i_save = 'X'
    is_variant = z_template
    tables
    t_outtab = it_ekko
    exceptions
    program_error = 1
    others = 2.
    if sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    endform. " DISPLAY_ALV_REPORT
    *& Form DATA_RETRIEVAL
    Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 100 rows
    from ekpo
    into CORRESPONDING FIELDS OF table it_ekko.
    endform. " DATA_RETRIEVAL
    Form TOP-OF-PAGE *
    ALV Report Header *
    Form top-of-page.
    *ALV Header declarations
    data: t_header type slis_t_listheader,
    wa_header type slis_listheader,
    t_line like wa_header-info,
    ld_lines type i,
    ld_linesc(10) type c.
    Title
    wa_header-typ = 'H'.
    wa_header-info = 'EKKO Table Report'.
    append wa_header to t_header.
    clear wa_header.
    Date
    wa_header-typ = 'S'.
    wa_header-key = 'Date: '.
    CONCATENATE sy-datum+6(2) '.'
    sy-datum+4(2) '.'
    sy-datum(4) INTO wa_header-info. "todays date
    append wa_header to t_header.
    clear: wa_header.
    Total No. of Records Selected
    describe table it_ekko lines ld_lines.
    ld_linesc = ld_lines.
    concatenate 'Total No. of Records Selected: ' ld_linesc
    into t_line separated by space.
    wa_header-typ = 'A'.
    wa_header-info = t_line.
    append wa_header to t_header.
    clear: wa_header, t_line.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = t_header.
    i_logo = 'Z_LOGO'.
    endform.
    FORM USER_COMMAND *
    --> R_UCOMM *
    --> RS_SELFIELD *
    FORM user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
    Check function code
    CASE r_ucomm.
    WHEN '&IC1'.
    Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
    READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
    SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
    CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
    ENDCASE.
    ENDFORM.
    *& Form BUILD_EVENTS
    Build events table
    form build_events.
    data: ls_event type slis_alv_event.
    call function 'REUSE_ALV_EVENTS_GET'
    exporting
    i_list_type = 0
    importing
    et_events = gt_events[].
    read table gt_events with key name = slis_ev_end_of_page
    into ls_event.
    if sy-subrc = 0.
    move 'END_OF_PAGE' to ls_event-form.
    append ls_event to gt_events.
    endif.
    read table gt_events with key name = slis_ev_end_of_list
    into ls_event.
    if sy-subrc = 0.
    move 'END_OF_LIST' to ls_event-form.
    append ls_event to gt_events.
    endif.
    endform. " BUILD_EVENTS
    *& Form BUILD_PRINT_PARAMS
    Setup print parameters
    form build_print_params.
    gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
    gd_prntparams-no_coverpage = 'X'.
    endform. " BUILD_PRINT_PARAMS
    *& Form END_OF_PAGE
    form END_OF_PAGE.
    data: listwidth type i,
    ld_pagepos(10) type c,
    ld_page(10) type c.
    write: sy-uline(50).
    skip.
    write:/40 'Page:', sy-pagno .
    endform.
    *& Form END_OF_LIST
    form END_OF_LIST.
    data: listwidth type i,
    ld_pagepos(10) type c,
    ld_page(10) type c.
    skip.
    write:/40 'Page:', sy-pagno .
    endform.

  • Can i have a check box in the hierarchical tree in the icons place, urgent!!! please

    Hi,
    I'am working on the Hierarchical Tree structure which should have three levels, I need to have a check box in the place of the icon & if i select a node that node & the child nodes should get selected.
    After this when i say move selected ( i'am trying to use picklist class also) the entire checked tree has to move to the display area to the right & should display as tree structure & after this if i save then the checked records which are moved to another text area should get saved!!
    How to achieve this? I have the tree structure ready but the check box part is the worrying factor! & then moving the checked records to the right using picklist class is the second problem & finally saving records to database.
    Any help in this regard will be deeply appreciated:)
    If check box is not possible then i will have to look at other methods, will the tree structure allow checkboxes????
    Thanks
    Mahesh

    No the tree will not allow checkboxes

  • How to implement Check box in the Rtf based on the value from XML datafield

    Hello All ,
    It would be great if any one can help me in implementing check box in the rtf based on the data filed value from the XML data.
    I need to get in the out put checked boxes like what we say Radio button Yes or No ( If Yes it should be marked ).
    If any one worked on this please help us...
    Thanks in Advance...

    Did you check the user guide,
    we have a section over there :)
    http://blogs.oracle.com/xmlpublisher/2007/05/22

  • How do can I have the form fill in a check box if the user has entered text in a textbox?

    I have a form that is submitting an xml data file that is picked up by MS Word and used to populate a document. However, there's a 'Miscellaneous' field where the user can type in addtional information that would not drop easily into the Word document (exceptions, items not on the drop down lists, etc.). I'd like to test to see if that Miscellaneous field has infomation in it and if it does, to set a invisible checkbox to "1" so that I can insert a text message in the Word document that there's additional information in the .pdf form that will have to be addressed manually in the Word document.
    I've tried
    if(Misc.rawValue !== "")
    otherinfo.rawValue = 1;
    but while it doesn't generate a Javascript error, it doesn't set the value either, and I haven't found any function that checks for whether a field is empty. I'm sure there's got to be a way to do this, but I'm stumped. Any help greatly appreciated!
    Bill

    It appears you are using LiveCycle Designer, so you will have to use the syntax of FormCalc or LiveCycle Designer JavaScript.
    For FormCalc:
    if(HasValue(Misc)) then
    otherinfo = 1
    else
    otherinfo = 0
    endif
    For JavaScript
    if(HasValue(Misc.rawValue))
    otherinfo.rawValue = 1;
    else
    otherinfo.rawValue = 0;
    I added code to clear the check box if the user clears the field.

  • How to handle the check box in the alv tree display

    Hello,
    in my ALV Tree Report i have a check box in the output.
    I have one check box in the selection screen as select all .
    if this is selected then all the check boxes in the output must be selected that is (X).
    am using CL_GUI_ALV_TREE  for this.
    Please give me some input how to make that check boxes 'X' in the above mentioned case.
    With Regards,
    Sumodh.P

    Sumodh,
    check this
    Re: Select all checkbox in ALV tree
    please search before posting
    Thanks
    Bala Duvvuri

  • How to enable a check box using the table LVC_S_FCAT

    hi,
    I am working on reports. I have to have a check box and i am using the table LVC_S_FCAT to get the check box, i am getting the check box. how to enable it.

    Hi Preethi,
    try to set default the check-box with the
    value '0', '1', '-', ' ' and 'X' (0/1 -> only display,
    '-' field is not shown, ' ' and 'X' is normal)
    and see the differences.
    Hope it helps.
    Regards, Dieter
    Sorry, i thought you meen enable not editable.
    Message was edited by: Dieter Gröhn

  • How can I format a field to have a Check Box in the center.

    I am a new adobe user and I am creating a form in Adobe LiveCycle Designer. Most of what I needed to do I was able to figure out, but I cannot find a way to place a Check Box in the center of a chosen field. Each time I use the Check Box from the library it automatically places the Box in the center-right of the field. Then when trying to format the paragraph, I get no options about where I'd like the box to reside within the field. Is there a simple way to get a Check Box into the center of a Field or will I have to pursue other options. If I do have to pursue other options are there any ways to limit a text to an X and have it either be On or Off?
    Thanks for your aid.

    This behaviors usually happens when you create the fields but  a copy paste command from one of the fields. The copy paste command assumes that your intentions is to maintain a copy of the field in two separate locations (e.i, a form field  "company name" printed in each and every page of a multi-page form document.
    Go to the properties fields of each field and make sure  to assign unique form field  names.

  • To add a check box in the login screen

    Hi,
    I need to put a check box in the login screen of CRM below the LOGON button with a message :'I agree with the terms and condition of the System'.
    Please help.

    See: Improve PDFs: Create interactive PDF checklists

  • How to get a check box on the selection screen

    Hi all
    can any body tell me how to get a check box on the selection screen

    parameter: pa_check   as checkbox.
    To define the input field of a parameter as a checkbox, you use the following syntax:
    PARAMETERS <p> ...... AS CHECKBOX ......
    Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
    If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
    REPORT DEMO.
    PARAMETERS: A AS CHECKBOX,
    B AS CHECKBOX DEFAULT 'X'.

  • Hide check box in the print preview and print of OO ALV

    Hi Experts,
                      I am working on an OO ALV Report. I am facing an issue as,
    1) I have a check box in the output of the report. If the user clicks on print or print preview the check box should not be printed.
    2) When I am printign top of page in the event PRINT_TOP_OF_PAGE, when I tried to insert new line its not printing a new line.
        please suggest me how to print empty lines in the print top of page event of OO ALV.
    Please help me to complete these issues.
    Thanks in advance.
    Regards.
    Ranganadh.

    hi,
    you can use the write statement in the print_top_of_page event of oo alv.
    regards.

  • Adding check box in the transaction xd02

    hi friends,
      My requirement is to add a check box in the customer change : contact person details standard screen in the transaction xd02.
    can any one please give me the suggestions for that?

    when u find the BADI name go there and add a sub screen with the element you want to put in there. activate the BADI. your task is done.

Maybe you are looking for

  • Dell 1905FP external flatscreen.  Weird scrolling problem!

    I have a dell 1905fp 19in external monitor that I am using with my ibook g4. I have been using it for about 3 months now, but I consistently have the same problem with microsoft word. I open a word document and when I scroll up and down on my ibook m

  • How to initialize the Http Tunnel Connection

    hi all, I am developing an application in which i have to get the images from the server.At first i have used the Apache Tomcat it was working fine in my localSystem. when the same application when getting the images from the server it was getting th

  • Anyone successfully got Prod. BOM components printing on AR Docs?

    Hi All, Has anyone successfully got Production BOM components to print out in their AR documents in a similar way to a Sales BOM using either Crystal or PLD? (price of components is irrelevant, quantity of components is irrelevant as well, we just ne

  • My computer is not compatible with my printer??

    Moved to the Mac printing forum for better coverage. Bob Headrick,  HP Expert I am not an employee of HP, I am a volunteer posting here on my own time. If your problem is solved please click the "Accept as Solution" button ------------V If my answer

  • The work item linked to bsp application can not be executed in CRM webUI

    Hi all,     1. i have configured workflow in SAP GUI. And i have linked one activity to bsp application(link to the task with bo WEBSERVICE and method PROCESSDIALOG).     2. When i start the workflow and click the workitem in workflow inbox, then the