Activating BW Process keys/new content after go live

Hi There,
Can anyone advise if activating process keys after the implementation has gone live will cause any issues.
In our case the solution is live and we are using standard extractors for POs (2LIS_02_ITM) and 2LIS_03_BF(Stock Movements) but so far we have not activated/used the process keys on R3/BW sides respectively.
There is now a requirement to activate some more standard content cubes e.g. 0RT_C05 (Merchandise procurement) and extractor 2LIS_02_SCL , that would eventually lead us to activate BW Process keys to b used in the update to 0RT_C05.
But I am a bit worried now as to whether it can cause the existing components of the delivered solution to breakdown e.g if it changes the contents that are being updated in PSA in any way after the Process key has been activated in R3 side.
I am happy if there are no changes to fields other than process key relevant fields like BWMENG, BWOVG etc but don't know if that is the case
If no one knows of a direct answer to my question, can someone say as to what exactly happens to the records being posted into PSA after the process keys have been activated.
thanks,
Kulmohan

tried and found that process key activation only causes an effect in the process key relevant fields. But please try in your scenario before you take my word.

Similar Messages

I have been sharing an itunes acct with my wife. If I setup my own acct, will the content of my iphone be on the new acct after I sync?

I have been sharing an itunes acct with my wife. If I setup my own acct, will the content of my iphone be on the new acct after I sync?

Sure.
See here for Creating Her Apple ID > http://support.apple.com/kb/HT5622
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
And here for > How to Use Multiple iDevices with One Computer
Also have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And you may find this Video Link of Interest...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

Logic X Additional Content after creating a new User Profile

Hey guys. I have a MBRpro and I'm running into problems with a plugin and diskspace.
I bought East/West Symphonic Orchestra Platinum Plus and Symphonic Choirs and the plugin is killing my CPU on my current User Profile.
Yesterday, I created a new blank user, and its running fine there. I'm guessing because all the systems resources are available without running background daemons from other apps.
After I launched Logic X under the new user, it asked me if I wanted to download additional content. I had already downloaded all the content under the old user, and so I said "no" as I'm struggling with disk space on my retina (6gig free). I played a bit - confirmed the plugin was working fine, quit it/logged off and went back to my old profile.
Today I launched the new user (after logging off from my old profile) and launched logic but now the additional content menu is greyed out. I'd like to know what is going on.
1stly, Is it greyed out only on the new user, because old user installed it all already? If so.. why did it ask me the first time to download additional content?
2ndly, can I verify if the downloadable content library on the older user has carried accross / or is accessable under the new user profile?
3rdly, If the additional content / Libraries are not automatically shared, can I make them available/shared amongst both users, since I don't have the internal diskspace? Moving it all onto an external drive is not the best option for me. I need to keep it all on my laptop if I can.
Thanks for your help guys. I couldn't find anything on the forums regarding content shared amongst users on the same machine. Called Apple Care and they sent me to you guys. :-/
Cheers,
Geo

Hi,
I had some problems with my audio interface, but they were solved with the last Logic update. Which version are you on?

Create new layer after active layer

Using scriptlistener I can create a new layer called "newlayer" after the active layer. So far so good.
var id197 = charIDToTypeID( "Mk " );
var desc49 = new ActionDescriptor();
var id198 = charIDToTypeID( "null" );
var ref41 = new ActionReference();
var id199 = charIDToTypeID( "Lyr " );
ref41.putClass( id199 );
desc49.putReference( id198, ref41 );
var id200 = charIDToTypeID( "Usng" );
var desc50 = new ActionDescriptor();
var id201 = charIDToTypeID( "Nm " );
desc50.putString( id201, "newlayer" );
var id202 = charIDToTypeID( "Lyr " );
desc49.putObject( id200, id202, desc50 );
executeAction( id197, desc49, DialogModes.NO );
However, without the script listener we have
var layerRef = app.activeDocument.artLayers.add()
layerRef.name = newlayername
layerRef.blendMode = BlendMode.NORMAL
// Move the new layer after the current layer
layerRef.moveAfter(app.activeDocument.artLayers[layerIndex])
The moveAfter command needs an index, which would mean looping though all the layers till to find the active layer (since we can't access that throughthe DOM). This seems a bit long winded to me. Or am I missing a trick here?

Well I would just use the scriptlistener code but if you don't want to for some reason you should make a reference to the activeLayer before add the new layer. Then use that reference as the moveAfter argument. The moveAfter method needs a layer object not a layer index. You need the index only because you are trying to supply that layer object by index.
layerRef.moveAfter(someLayerRef);
Also ( not that it really matters ) when scripting was first added there were several methods for moving a layer, moveAfter() was one of those. Those methods were combined into one method and the old methods are no longer documented in the javascript reference. So below is the documented way to move the layer.
layerRef.move(someLayerRef, ElementPlacement.PLACEAFTER);

Only after deleting filesystem based cache files new content is shown

Hi,
it seems that new content on my pages ends up in the filesystem cache on the middle tier. I have no influence on behaviour via the (caching concerned) page settings.
Neither does a invalidate cache on the Access tab has any effect.
Only when I remove middle tier cache files (in ..Apache\modplsq\cache) my new content shows up on the page.
Has anyone had this behaviour ?
Oracle says that this is normal behaviour and I should see in to the documentation to change this ....
I'm lost though...
Thanx Dave Ruzius
Dave Ruzius

Dave,
What do you mean by not having access to influence the caching - do you mean you don't have admin access to the pages in question ?
I suggest you read this document to understand the caching mechanisms for pages.
Bottom line is, there are 3 caching modes (prior to 10g) for pages..
- cache page defn only
- cache page and content for [n] minutes
- don't cache
from what you're describing it sounds like the page has been cached with cache page and content for n minutes. This will cause the content to be cached in the file cache and the local browser cache but NOT in the webcache. The content will be cached for a period of time defined by the page designer, and will only expire after that time has expired. There should be a refresh link on the page when it's cached using this method (unless the page designer has removed it)..
Does that help ?

HT1766 After I backed up my new iPhone with content from my old iPhone, all of my new content was deleted. How do I retrieve it?

After backing up my new iPhone with content from my old iPhone, all of my new content (photos, voice memos, etc) was deleted. How do I retreive this?

If you just bought the iPhone today, the first time you connect a new iPhone or iOS device to iTunes the first time that is used to sync with another iOS device, you are prompted to transfer the backup for the other iOS device to the new iOS device, or set up the new device as a new device.
Sounds like you did the former and if so, this did not include backing up the new iPhone first. All data on the iPhone was replaced with the backup for the iPod Touch. The data that was on the iPhone at that time is gone.

SharePoint PowerPivot feature failing after site collection was backed up and restored (moved to new content database)

Hi there,
I am having some strange issue with my PowerPivot for SharePoint but can't figure out what is causing this. Here is what happened:
I setup PowerPivot (PP) for SharePoint and activate it on few site collections in production environment; I upload a PP workbooks in a library, manage the data refresh schedules, run the data refresh for an external SQL databases, etc. Everything works
fine for several days.
One day we decide the move one of the site collections (X) from its current content database to its own (new) content db. The way we did it is that we took the site collection backup in production, restored it in test environment (in its own content
db; we deleted the old site collection in test first before restoring), checked everything including PP data refreshes etc.; all worked fine.
Then we did the same thing in production - we deleted the old site collection X, restored the site collection from the same backup file that we used in test environment, everything works fine EXCEPT the PowerPivot refreshes!! :-(
I am getting these errors: When I click on the workbook, it gives this error "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh: PowerPivot Data"
When I click OK on error dialogbox, it opens the workbook fine but no slicers/refreshes work now. When I go back to the library and click on "Manage PowerPivot Data Refresh" to open the refresh history/schedule page, it gives this generic but scary
error: "An unexpected error has occurred. Troubleshoot issues with Microsoft SharePoint Foundation." ULSViewer or Event viewer is not showing anything related to this error!
Strange thing is that PP refresh works fine in Test environment, as well as on other site collections in production that we didn't touch (which tells me there is nothing wrong with my PP configuration). Did the backup/restore in prd cause anything? Did moving
it in its own contentdb cause anything? (But then why it works in test environment?) Is there anything wrong with site collection PP feature? Can force reactivating it help??????? I am just lost and going crazy now!
Please help.
Asif

I have found some entries in ULS logs seemingly relevant to this issue as below: Please help. Thanks.
Note: I have replaced urls with <url> or <server> and username with "domain\user".
ExternalSource.GetExternalKeyAndStateAndMarkUsed: Populating the session's credentials for external data. Index=0, Credentials=[14337250,
domain\user]
ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N,
WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://<url>/SQL_PowerPivotTest.xlsx, Version=Monday, 09 September 2013 06:29:42
Check whether "http://<url>/SQL_PowerPivotTest.xlsx" is in the farm.
Connecting to "http://<server>/_vti_bin/PowerPivot/Redirector.svc/?DataSource=/team/IT/SiteCollectionDocuments/SQL_PowerPivotTest.xlsx&LocaleID=1033".
WcfSendRequest: RemoteAddress: 'http://<server>:32843/0a4610a7f75f4ff582ca7329256f0fe3/SSASMidTierService.svc' Channel: 'Microsoft.AnalysisServices.SharePoint.Integration.IGeminiServiceApplicationClient'
Action: 'http://tempuri.org/IGeminiServiceApplication/GetDatabase' MessageId: 'urn:uuid:44f67e36-7ec2-4fe8-bd4c-277c9d9ddde7'
WcfReceiveRequest: LocalAddress: 'http://<server>:32843/0a4610a7f75f4ff582ca7329256f0fe3/SSASMidTierService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel'
Action: 'http://tempuri.org/IGeminiServiceApplication/GetDatabase' MessageId: 'urn:uuid:44f67e36-7ec2-4fe8-bd4c-277c9d9ddde7'
Entering monitored scope (ExecuteWcfServerOperation)
Obtaining routing information for the request using <SERVER> - User:domain\user, DataSource: http://<url>/SQL_PowerPivotTest.xlsx,
Version: 09/09/2013 06:29:42. (RequestStartTime=[<SERVER>])
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=10.7664521608193
EXCEPTION: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Unable to find the specified file. (Fault Detail
is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.IO.FileNotFoundException: Unable to find the specified file.
at Microsoft.SharePoint.SPFile.EnsureUniqueId()
at Microsoft.SharePoint.SPFile.get_UniqueId()
at Microsoft.AnalysisServices.SharePoint.Integration.Redirector.BackendRedirectService.GetDatabase(String loginName,
String dataSource, String versionLabel, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at Microsoft.AnalysisServices.SharePoint.Integration.GeminiServiceApplication.GetDatabase(String loginName, String
dataSource, String dataSourceVersion, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at SyncInvokeGetDatabase(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at Sy...).
Proxy encountered an error while trying to get the sandbox information. This request will be terminated
EXCEPTION: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Unable to find the specified file. (Fault Detail
is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.IO.FileNotFoundException: Unable to find the specified file.
at Microsoft.SharePoint.SPFile.EnsureUniqueId()
at Microsoft.SharePoint.SPFile.get_UniqueId()
at Microsoft.AnalysisServices.SharePoint.Integration.Redirector.BackendRedirectService.GetDatabase(String loginName,
String dataSource, String versionLabel, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at Microsoft.AnalysisServices.SharePoint.Integration.GeminiServiceApplication.GetDatabase(String loginName, String
dataSource, String dataSourceVersion, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at SyncInvokeGetDatabase(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at Sy...).
PF_CHECK_ERROR returned 'critical hresult error' 0x80004005 ; Stack Trace:NA
PF_CHECK_ERROR returned 'critical hresult error' 0x80004005 ; Stack Trace:NA
PF_CHECK_ERROR returned 'hresult error' 0x80040e41 ; Stack Trace:NA
ConnectionManager.GetConnection: Failed to create new connection, exception=Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass3.<CreateConnection>b__0()
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(WindowsIdentity wi, ExecuteImpersonatedMethod
method, Boolean dispose)
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(ExecuteImpersonatedMethod method, Boolean
dispose)
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsDelegation.TryExecuteImpersonated(ExecuteImpersonatedMethod
method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials,
ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId), sessionId=1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N,
connectionString=Provider=MSOLAP.4;Persist Security Info=True;Initial Catalog=Microsoft_SQLServer_AnalysisServices;Data Source=$Embedded$;MDX Compatibility=1;Safety Options=2;MDX Missing Member Mode=Error;Optimize Response=3;Cell Error Mode=TextValue pool
count=0
ConnectionManager.GetConnection: Caught an exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass3.<CreateConnection>b__0()
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(WindowsIdentity wi, ExecuteImpersonatedMethod
method, Boolean dispose)
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(ExecuteImpersonatedMethod method, Boolean
dispose)
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsDelegation.TryExecuteImpersonated(ExecuteImpersonatedMethod
method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials,
ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest
connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionInfo connectionInfo, ConnectionKey connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList&
connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest,
ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
Refresh failed for 'PowerPivot Data' in the workbook 'http://<url>/SQL_PowerPivotTest.xlsx'.
[Session: 1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N User: 0#.w|domain\user]
ExternalSource.ValidateConnection: Unable to get a connection: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass3.<CreateConnection>b__0()
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(WindowsIdentity wi, ExecuteImpersonatedMethod
method, Boolean dispose)
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(ExecuteImpersonatedMethod method, Boolean
dispose)
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsDelegation.TryExecuteImpersonated(ExecuteImpersonatedMethod
method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials,
ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest
connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionInfo connectionInfo, ConnectionKey connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList&
connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest,
ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.TryGetValidatedConnection(Request request, Credentials
credentials, ExtendedConnectionInfo extendedConnectionInfo, Boolean shouldReportFailure, Boolean auditConnection, Connection& connectionOut). sessionId=1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N,
externalSource=PowerPivot Data
ConnectionInfoManager.InitConnInfoFromOdcFile: ODC File Uri is not valid:
ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String
externalSourceName, Int32 externalSourceIndex, Boolean& shouldReportFailure)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo,
ExternalSourceStateInfo prevExternalSourceStateInfo, Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOperation, Boolean verifyPreOperationConnection), Data Connection Name:
PowerPivot Data, SessionId: 1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N, UserId: 0#.w|domain\user

Enabling process keys on R/3 side

Hi All,
I have done an enhancement for 2lis_02_itm with few fields.
I have successfully completed this work and i can see the records in RSA3.
Now the client is asking that during testing they found that the process keys are not enabled in R/3 side.They told me to enable process keys.
Can any one please tell me how to do this.
I think we can do via BF11 Tcode but which settings I have to do I am not sure about it.
And please explain me about process keys.
This is very very urgent.
I would appreciate the earliest responce.
Thanks
S VR

Hi,
You need to make 2 settings in R/3 before filling the setuptable.
1) Industory sector selection
2) MAking a Tick mark for BW by using Tcode Bf11.
<b>Also Check OSS Note 353042 - Howto: Activate transaction key (PROCESSKEY)</b>
https://websmp104.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=353042&_NLANG=E
Symptom
Fields BWGEO, BWGEOO, BWGVP, BWGVO, BWNETWR, BWMNG, etc. of DataSources 2LIS_02_SCL, 2LIS_02_ITM, 2LIS_03_BF, 2LIS_03_UM, 2LIS_40_REVAL are not filled.
This may lead to the following:
The system does not perform any update into an InfoCube (for example: 0RT_C*, 0PUR_C01, 0CP_PURC1 and so on), even though data arrives in BW.
This occurs with the following InfoSources:
2LIS_02_SCL, 2LIS_02_ITM
2LIS_03_BF, 2LIS_03_UM
2LIS_40_REVAL
With some restriction, this symptom also occurs with the following InfoSources if they are used in connection with retail or consumer products. (InfoCube: 0RT_* or 0CP_* ).
2LIS_11_VAITM, 2LIS_12_VCITM, 2LIS_13_VDITM
Other terms
0PROCESSKEY, PROCESSKEY, 0RT_C01, 0RT_C02, 0RT_C03, 0RT_C04, BWBRTWR, BWGEO, BWGEOO, BWGVP, BWGVO, BWNETWR, BWMNG
Reason and Prerequisites
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Related notes:
157317 --> You MUST make sure that this note is relevant for you.
352344 -> Process key + reversals in Inventory Management
(Consulting note).
Bye
Dinesh

Relation between Inventory Process keys and movement types

Dear All,
Is there any way to find the relation between Inventory process keys (which is in SBIW-> Settings for Application specific data sources(PI) -->Logistics -->Settings for IBU Retail / CP --> Transaction key maintenance for SAP BW) and movement types .
Thanks in advance...
Regards,
Raju

Hi,
Please read the note below.
Note 353042 - Howto: Activate transaction key (PROCESSKEY)
It has something for you ....
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Hope this helps.
Raj

I want to restore the preinstalled OS X Maverick on my new MacBook after upgraded installed Yosemite gets stuck at load bar

Hi,
After my free upgrade to OS X Yosemite
on my new MacBook with preinstalled OS X Maverick,
the MacBook starts with the new colorful Yosemite-Screen
and I can login to my MacBook-Account succesfully;
but then, after my password is accepted
the Yosemite load_display_line loads to a 1/3 only and the Yosemite stucks at this point.
As offered during my tries to fix the problem on the MacBook,
I had my MacBook checked by Apple
and received the code for "no problems, my MacBook is alright": ADP000.
Is somebody here who knows how
to restore the preinstalled OS X Maverick on my new MacBook
after the upgraded installation of Yosemite?
jona li

Here's how:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Repeated postfix "Stray process" chatter in log after update to 10.5.8

After updating to 10.5.8 (via combo updater), I've been getting a bunch of odd console messages, about every minute, along the lines of the following:
com.apple.launchd[1] (org.postfix.master[6214]): Stray process with PGID equal to this dead job: PID 6216 PPID 1 qmgr
The dead job alternates seemingly at random between qmgr and pickup (both of which I can see running via Activity Monitor (owned by _postfix), and the PID increases steadily. A Google search turned up a few things along the lines of this older thread:
http://discussions.apple.com/thread.jspa?messageID=8141721
...but they largely seemed to be from people who actually were doing something with postfix, which I'm not. This is a 2009 mini with a pretty much stock OS install; I certainly haven't done anything at that low of a level, and I'm in fact not even using Mail on that system (it's a media center/file server).
The only persistent process that's running that I can imagine would have anything to do with this is Growl, which I do happen to be using to send myself notifications of failed backups. Disabling Growl didn't seem to make any difference, though.
Anybody else seen this with 10.5.8, or have any suggestions about why it might be happening? It seems to be functioning fine, but I kinda don't like bloated log files, and I like randomly spawned/killed processes without understanding them even less.

Addendum:
I just saw this in my system log, no idea what exactly it's about:
Aug 21 11:37:26 FrontRow blued[51]: Potentially fatal Bluetooth firmware error condition detected:
Aug 21 11:37:26 FrontRow blued[51]: PSKeyUser0: len = 4, error = 0x0, psKey=650, Data: 0000B22300001800
Aug 21 11:37:26 FrontRow blued[51]: PSKeyUser1: len = 4, error = 0x0, psKey=650, Data: 0000B22300001800
Aug 21 11:37:26 FrontRow blued[51]: Attempting repair...
Aug 21 11:37:27 FrontRow blued[51]: Repair complete: error = 0x0
The condition persists, and the usual ad nauseum errors resumed. Wish I didn't have to sign up to ADC to submit a conventional bug that I could update with new content like this.

Timeout for content after installation

Hi all!
Running w2000, 9i DB and 9ias, I finally managed to install the portal. Took a while.
( used the step-by-step guide ). But now after the installation, I get the following errors when opening the /pls/portal30 homepage.
Portal Community Portlet Timed Out
Error: Timeout for content=15032
Error: Timeout for content=15032
Error: Timeout for content=15032
Error: Timeout for content=15482
Upon clicking the Login link, I get the following error:
You cannot login because there is no configuration information stored in the enabler configuration table. (WWC-41439)
I have tried to change the JServ settings to solve the timeout problem, but it doesn't help.
my current zone.properties settings are:
init.timeout=240000
servlet.page.initArgs=stall=60
servlet.page.initArgs=requesttime=240
Have anyone seen this before?
all help greatly appreciated.
JServ log output are appended below.
regards
Rune Engseth
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=34 Starting servlet, millis=1022588257108
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=34 Starting Retrieval of Meta-Data time=1022588257108
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=34 mTimeOut=10000000 for page
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=26 username is null
[28/05/2002 14:17:37:108 CEST] page/DEBUG: active=26 content-fetcher7 starting on page
[28/05/2002 14:17:37:199 CEST] page/DEBUG: active=26 Query String=_mode=3
[28/05/2002 14:17:54:504 CEST] page/DEBUG: active=34 After connecting to Page Meta, millis=17396
[28/05/2002 14:17:54:754 CEST] page/DEBUG: active=26 content-fetcher7 Finished working on page, size=null, millis=17555, id=null
[28/05/2002 14:17:54:754 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher7
[28/05/2002 14:17:54:754 CEST] page/DEBUG: active=34 Finishing servlet, millis=17646
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=34 Starting servlet, millis=1022588275005
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=34 Starting Retrieval of Meta-Data time=1022588275005
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=34 mTimeOut=10000000 for page
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=26 username is null
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=26 content-fetcher6 starting on page
[28/05/2002 14:17:55:005 CEST] page/DEBUG: active=26 Query String=_mode=3
[28/05/2002 14:17:55:095 CEST] page/DEBUG: active=26 Computed character set from response "x-oracle/portal-page; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:55:095 CEST] page/DEBUG: active=26 content-fetcher6 Before reading the data stream page, millis=90
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=26 content-fetcher6 xxx Characters=3522 page, millis=100
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 After connecting to Page Meta, millis=100
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 Processing data 3.0.8
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 Computed character set from response "x-oracle/portal-page; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 x-oracle-portal-expires header derives to: Wed, 29 May 2002 21:37:55 GMT
[28/05/2002 14:17:55:105 CEST] page/DEBUG: active=34 setting up cache output stream subID is 1
[28/05/2002 14:17:55:185 CEST] page/DEBUG: active=26 content-fetcher6 xxx Characters=5000 page, millis=180
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=26 content-fetcher6 xxx Characters=3924 page, millis=190
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 Starting a Page
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=26 content-fetcher6 Finished working on page, size=12446, millis=190, id=null
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher6
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 mTimeOut=15000 for 11
[28/05/2002 14:17:55:195 CEST] page/DEBUG: active=34 Adding portlet to queue 11
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 12
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 12
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 13
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 13
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 14
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 14
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 16
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 16
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 17
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 17
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 timeout =15
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 mTimeOut=15000 for 18
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 Adding portlet to queue 18
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=34 http://bekk-RuneE.BEKK.INT:80//pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:17:55:205 CEST] page/DEBUG: active=26 username is PUBLIC
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=26 content-fetcher5 starting on 11
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=26 Query String=_portlet_id=1&_provider_id=807692&_node_id=80769&_reference_path=11_FAVORITES_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=27 username is PUBLIC
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=27 content-fetcher4 starting on 12
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=27 Query String=_portlet_id=2&_provider_id=807696&_node_id=80769&_reference_path=12_COMPORTLET_TECHNEWS_807696&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=28 username is PUBLIC
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=28 content-fetcher3 starting on 13
[28/05/2002 14:17:55:215 CEST] page/DEBUG: active=28 Query String=_portlet_id=2&_provider_id=807692&_node_id=80769&_reference_path=13_RECENTOBJECTS_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=29 username is PUBLIC
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=29 content-fetcher2 starting on 14
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=29 Query String=_portlet_id=1&_provider_id=807693&_node_id=80769&_reference_path=14_FOREIGNAPPS_807693&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=30 username is PUBLIC
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=30 content-fetcher1 starting on 16
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=30 Query String=_portlet_id=16&_provider_id=807692&_node_id=80769&_reference_path=16_CREATE+PAGES_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=31 username is PUBLIC
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=31 content-fetcher0 starting on 17
[28/05/2002 14:17:55:225 CEST] page/DEBUG: active=31 Query String=_portlet_id=3&_provider_id=807697&_node_id=80769&_reference_path=17_CREATESITES_807697&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 content-fetcher24Closing cached HTTP connection, host/port changed
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 username is PUBLIC
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 content-fetcher24 starting on 18
[28/05/2002 14:17:55:235 CEST] page/DEBUG: active=32 Query String=_portlet_id=10&_provider_id=807692&_node_id=80769&_reference_path=18_CREATEOBJECTS_807692&_language=us&_mode=1&_back_page_url=null&_page_url=http%3A%2F%2Fbekk-RuneE.BEKK.INT%2Fservlet%2Fpage%3F_pageid%3D1%2C11%26_dad%3Dportal30%26_schema%3DPORTAL30&_has_title_region=1&_has_border=0&_page_type=PORTLETS
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 Computed character set from response "text/html; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 content-fetcher5 Before reading the data stream 11, millis=591
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 content-fetcher5 xxx Characters=1150 11, millis=591
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 content-fetcher5 Finished working on 11, size=1150, millis=591, id=null
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher5
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=34 Writing portlet to browser 11
[28/05/2002 14:17:55:806 CEST] page/DEBUG: active=34 Done Writing 11
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 Computed character set from response "text/html; charset=UTF-8" as "UTF-8"
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 content-fetcher24 Before reading the data stream 18, millis=3034
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 content-fetcher24 xxx Characters=2 18, millis=3034
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 content-fetcher24 Finished working on 18, size=2, millis=3034, id=null
[28/05/2002 14:17:58:269 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher24
[28/05/2002 14:18:10:247 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 Timeout occurred, label=13 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher3
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher3
[28/05/2002 14:18:10:247 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 Timeout occurred, label=12 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:247 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher4
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher4
[28/05/2002 14:18:10:257 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 Timeout occurred, label=16 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher1
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher1
[28/05/2002 14:18:10:257 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 Timeout occurred, label=14 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher2
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher2
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Writing portlet to browser 12
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Done Writing 12
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Writing portlet to browser 13
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Done Writing 13
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Writing portlet to browser 14
[28/05/2002 14:18:10:257 CEST] page/DEBUG: active=34 Done Writing 14
[28/05/2002 14:18:10:267 CEST] page/DEBUG: active=34 Writing portlet to browser 16
[28/05/2002 14:18:10:267 CEST] page/DEBUG: active=34 Done Writing 16
[28/05/2002 14:18:10:707 CEST] page/JNI: Exception when trying to connect in 1.
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=26 Timeout occurred, label=17 url=http://bekk-RuneE.BEKK.INT/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=26 ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher0
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=26 ContentFetcher ready=content-fetcher0
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Writing portlet to browser 17
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Done Writing 17
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Writing portlet to browser 18
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Done Writing 18
[28/05/2002 14:18:10:707 CEST] page/DEBUG: active=34 Finishing servlet, millis=15702

I've had the same problem. You can solve it by modifying the timeout-period for the provider. Surf to the portal-homepage- administration- edit provider.

Ensure 1 Active Sync process runs against the change log before all others?

He folks,
We have a lot of LDAP active sync thread. We have a primary on that correlates to an individuals account. Then we have several that represent affiliations at our organization. The affiliations are represented in LDAP as subordinates of the main persons entry. These sets of data were set up as different resource adapters because the they are different object types in LDAP.
Now we are running into a problem where the active sync threads for subordinates are running before the thread for the main entry. What this means, is that an affiliation thread might run, see a new person was added and ignore it (since that isn't it's resource) but find the affiliation subordinate entry and want to process it. However, the thread can't find an associated account in IDM yet, so no processing takes place on that change, ever..
If the main account active sync thread had already run, it would see the main entry, and then make a correisponding IDM entry. If the IDM entry has been made, and the affiliation resource active sync adapter runs, it will then find the IDM entry and update that.
So.. We are experience problems when the affiliation processes a new account before the main account sync process.
Can we ensure somehow that the main account active sync process always runs first? These are all LDAP resources. If we could ensure the main account resource / sync happens before any other affiliation resource, then we would never ignore data, and would not have anyproblems.
Does anyone know of a good clean way to do this?
Thanks!

I had a similar issue, and solved it by using post process workflows and starting and stopping resource adapters manually. This will allow you to start the first resource, and any others you want can be started/stopped manually via the workflow. You can effectively "chain" resource adapters to run in any order you'd like.
On the first resource that you want to run before anything else, this will run as a post-process workflow:
     <Activity id='0' name='stopFirstResource'>
        <Action id='0' name='stop'>
          <expression>
            <block name='stop'>
              <invoke name='stopActiveSyncOnResource' class='com.waveset.session.SessionUtil'>
                <ref>displaySession</ref>
                <s>%%FIRSTRESOURCENAME%%</s>
              </invoke>
            </block>
          </expression>
        </Action>
        <Transition to='Process Errors'>
          <ref>WF_ACTION_ERROR</ref>
        </Transition>
        <Transition to='startSecondResource'/>
      </Activity>
      <Activity id='1' name='startSecondResource'>
        <Action id='0' name='start'>
          <expression>
            <invoke name='startActiveSyncOnResource' class='com.waveset.session.SessionUtil'>
              <ref>displaySession</ref>
              <s>%%SECONDRESOURCENAME%%</s>
            </invoke>
          </expression>
        </Action>
        <Transition to='Process Errors'>
          <ref>WF_ACTION_ERROR</ref>
        </Transition>
        <Transition to='end'/>
      </Activity>
This will stop the first one (after it has run) and start the second one.
Then, on the post process workflow of the second resource:
      <Activity id='1' name='stopSecondResource'>
        <Action id='0' name='stop'>
          <expression>
            <block name='start'>
              <invoke name='stopActiveSyncOnResource' class='com.waveset.session.SessionUtil'>
                <ref>displaySession</ref>
                <s>%%SECONDRESOURCENAME%%</s>
              </invoke>
            </block>
          </expression>
        </Action>
        <Transition to='Process Errors'>
          <ref>WF_ACTION_ERROR</ref>
        </Transition>
        <Transition to='end'/>
      </Activity>This stops the second one.

Activate a Scenario after go-live in new gl

Hello All,
We went live with New GL a year ago and we didnt assign any update scenarios for leading ledger hence no account assignments in new gl tables.Now if we update a scenario like profit center does it impact the transactions previously posted ?
or it just updates the transactions going forward?I have not recieved any error message doing this in development system till now.
I went through the forum and many OSS Notes but I still didnt come to a conclusion that there will be no issues if i do this,let me know if any one has faced this scenario and has any problems doing this.
Thanks,
Sai.

As per note 891144:
. You cannot change the ledger definitions subsequently, or deactivate
   an assigned scenario or a customer field temporarily, or activate an
   assigned scenario or a customer field subsequently (for example,
   assign FIN_UKV subsequently). The relevant fields (characteristics)
   are updated in the database tables of the general ledger (new) only
   after you assign a scenario to a ledger. When you activate
   subsequently, the account assignments for relevant characteristics
   are missing from the general ledger (new) for documents posted
   previously. This is of particular relevance if characteristics from
   this scenario are used in the document splitting.
it should be not critical for the system processing if you activate scenarion subsequently
in your production system.
But please be aware that the data that have been posted before the
activation will still not contain the values in the relevant fields, but
only the documents posted after the activation. Thefore the data will
not be complete.

Activating BW Process keys/new content after go live

Similar Messages

Maybe you are looking for