Activating Communication Channel Monitor in PI 7.0

Hello all,
Can anyone tell me Detail  steps involved in <b>Activating Communication Channel Monitor</b>  I have tried assigning my User with following roles
A user needs the following role to query the status of communication channels:
&#9679;      xi_af_channel_admin_display
A user needs the following role to start or stop communication channels:
&#9679;      xi_af_channel_admin_modify
Is it correct ?
What are steps ?
regards
Prasad

Hello Sreeram ,
Thanks for the Reply.I am working on PI 7.0 SP06  in a SAP Note I have read that
it is from PI 7.0 SP8 i think because of the lower SP level iam not getting the
Communication Channel Monitor displayed.
Note 1000528 - FAQ: XI 3.0 / PI 7.0 Adapter and Channel Monitoring
Regards
Prasad
Message was edited by:
        prasad chintala

Similar Messages

  • Communication Channel Monitoring Error

    Hi...Experts,
    we r doing RFC-SOAP scenario with out using WSDL file,
    sender Communication Channel Monitoring getting error like this
    Error in processing caused by: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
    In the Receiver Communication Channel Monitoring, getting error like this.
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden.
    how can i rectify these errors, pls suggest me..
    regards,
    Pasi.

    Hello Pasi,
    Error: HTTP 403 Forbidden
    Description: The server understood the request, but is refusing to fulfill it
    Possible Tips:
    Path sap/xi/engine not active
    • HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
    • Because of Inactive Services in ICF –Go to SICF transaction and activate the services. Refer SAP Note -517484
    • Error in RWB/Message Monitoring- because of J2EE roles – Refer SAP Note -796726
    • Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. –Because of the URL is incorrect or the adapter is not correctly deployed.
    Go through Micheal's Blog..
    XI: Timeouts
    /people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
    Thanks,
    Satya Kumar

  • Communication Channel Monitoring not showing up Communication  Channels

    Hi All,
    PI 7.1 : I  have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
    And in ID I am getting below warning message for that Communication Channel.
    Message:  Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for  Adapter Engine is missing in SLD.
    Any idea? I appreciate your  quick help.
    Thanks,
    Carl

    Hi Abhishek,
    I have selected inID ,  File dapater software component  SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
    Thanks,
    Carl

  • Issue with RWB Communication Channel Monitoring

    Hi All,
              I am getting a error in RWB >> Communication Channel Monitoring.
    I deactivated the receiver JDBC adapter, and now when I activate it, in the RWB it shows <i><b>'Channel started but Inactive'</b></i> I tried to start and stop the channel and also activating and deactivating the channel. But no success, it keeps showing <i><b>'Channel started but Inactive'</b></i>. Pls advice....
    XIer

    Hi XIer,
    Ideally adapter status should be in green when it is up and running..
    if it not then..
    1. check the status in ID. It should  be in active state.
    2. check the status in RWB .It should be in green. I not check that your adapter got activated without any  cache error.
    3. Do a CPA Cache Refresh.

  • New channels in integration directory not displayed in communication channel monitoring

    Hi all,
    We configured recently new communication channels in the intgration directory (PI 7.0), and all changes were activated. But when we check in the communication channel monitoring, we cann't see them.
    Any idea please.
    Many thanks in advance

    Hi,
    Might be issue with cache.
    can you validate as per below thread?
    Communication channel not showing in CC monitoring
    Regards,
    muni.

  • Advance selection for source file-Error in communication channel monitoring

    Hi all,
    Referring to the link below:
    <b>/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    I have developed my scenario in the same way.But due to the values <b><NOTHING></b>
    in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
    Plase note that  our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
    Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
    Thanks & Regards,
    Sudhir Tiwari

    Sudhir,
    In the sender file adapter, you have an option called <b>"Processing Sequence"</b>.
    By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
    In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
    Regards
    Bhavesh

  • Error in Communication Channel Monitoring

    Dear All Experts ,
    we are getting the below error message while posting the transaction in the communication channel monitoring. Pls advise to resolve the same.
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=ae1e4075a0063170895328ec6f70c70d; at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId(AbstractLookupManager.java:173) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81) at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:461) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243) at com.sap.e
    Regards
    Machindra Patde

    Hi Machindra,
    Check if the channel name specified in sender/receive agreement is correct.
    If yes then delete the particular channel and create new one and specify that one in the agreement.

  • File to Proxy Scenario : Error in communication channel monitoring

    Hi,
    I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
    u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
    File will be picked from the FTP server.
    I have created File system in SLD of type "Third Party", Can this be the issue?
    Please guide me on this.
    Thanks,
    Chandravadan

    Hi!
    Check if the tcode SLDCHECK is ok!
    Check note #764176.
    Also, refer to link below and execute each steps from the links there MANUALLY.
    Wizard-Based Configuration:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
    Regards,
    Caio Cagnani

  • Page cannot be displayed error in Communication channel monitoring

    Hi,
    when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
    I am testing this for the for the first time in QA environment.
    But in development , CC monitoring works fine in the same Laptop.
    I have checked the hosts file and it has the IP address and system name present in it.
    i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
    we are using PI 7.0, windows XP and IE 7.0.
    Could anyone help to solve this problem?
    Thanks
    JJ

    I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
    This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
    instead of the FQDN you can also open the page using the IP address of the server.
    I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
    This may be because you did not mark the thread as a question
    Regards,
    Abhishek.

  • Sender Communication Channel Monitoring Error

    Hi....Experts,
    i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
    Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
    pls suggest me how can i rectify these errors..
    for helpful answers i will give points*********
    regards,
    Pasi.
    Edited by: pasi s on May 5, 2008 8:35 AM
    Edited by: pasi s on May 5, 2008 8:40 AM

    Hi Pasi,
       Check if you are using the same business service (under which u have created the Channels) at  sender side in configuration.
    You have to use the same business serivce for sender under which your communication channels are created...................
    Or
    Create a sender communication channel in the service that u have used at sender side.............
    So i think in your case there is a mismatch of using the diff sender service at diff stages.............
    Hope this will solve your problem
    Thanks
    Sai     
    PS: kindly reward points if helpful

  • Process not visible in the Communication Channel Monitor

    Hi there
    I have a scenario where I create multiple text files with my message mapping. First I created the scenario with a single file and tested it. It worked so then I changed the Interface Determination to Enhanced and the necessary occurrences to unbounded in my IM and MM. Now if I execute the scenario it shows a successful status in the SXMB_MONI but does not create the flat file. If I go to my Communication Channel Monitor it does not show it there so it did not reach it. Is there some other ting I needed to change for this multiple file scenario?
    Thanks,
    Jan

    Hi again
    I sorted out the issue but now I'm getting something weird. In my source Message Mapping I have:
    Destination
    --Name (0-Unbounded)
    Payload
    --Details (0-Unbounded)
    And my Target mapping I have
    Main_Structure (0-Unbounded)
    --FileDetails (0-1)
    So the Destination determines the number of files and the payload goes to the File Details.
    This does not work for some reason but if I change my mapping to a fixed number of files it works. For example: If I create a UDF that creates 2 arrays and map it to my Main_Structure it creates 2 files but it I map my Destination node with X amount of lines to my Main_Structure It shows fine in SXMB but does not show at all in the component monitor for the receiver CC and in my message monitor it shows "On Hold"

  • Communication Channel monitoring in PI 7.1

    Hi Folks,
        How to do the adapter monitering & Communication channel monitoring in teh sap PI 7.1.
    Regards,
      Santosh

    Hi,
    Have you searched in SDN,??
    there is no difference compare to other versions
    RWB-->ComponentMonitoring>Adapter Engine->Communication channel monitoring--->select communication Channel.fileter,then monitor it.
    Regards,
    Raj

  • Capturing the communication channel monitoring error into an alert.

    Hi,
    The following is my scenario:
    File adapter polls using file content conversion,if the source file is not in a proper format the file wont be picked up and communication channel will show error in channel monitoring.
    I have to configure an alert for the same.
    Can i capture the error message shown in communication channel monitoring and raise alert?
    Many Thanks,
    Pritish

    refer todays thread on the same issue;
    FILE ADAPTER ISSUE

  • Communication channel Monitoring

    Hi,
    we are in Pi 7.1 SP 8
    In communication channel monitoring under Cluster Node Details for Channel CC_XXXX i can see two nodes and both having same cluster node ID and short Log.
    one node in error and other node is success do i have to do any settings to have one node.
    when we compare sand box i have olny one node .
    pradeep A.

    >> can see two nodes and both having same cluster node ID and short Log.
    One should be server 0 and other should be server 1
    >>one node in error and other node is success
    This simply means that when one of the node was processing messages, there was an error message. If this error is resolved, it will turn green. You don't have to do anuthing for this separately.
    >>when we compare sand box i have olny one node .
    Purpose of this cluster is load sharing. Obviously in sandbox, such load sharing is not required.
    Regards,
    Prateek

  • Communication channel  monitoring did not record the processing detail

    Hi,
    I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel  monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
    Thanks in advanced!
    Meiying

    Hi
    Try opening directly
    tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
    http://<host>:<port>/mdt/channelmonitorservlet
    You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
    also refer
    No "Adapter monitoring" in runtime workbench

Maybe you are looking for