Activating Contribute on a new PC

Hi. Any help appreciated. I have an old version of Contribute
that was loaded, and working fine, on my previous laptop before it
died. I'd previously transferred Contribute onto the laptop from my
old PC. Have attempted to reinstall on the new laptop, by
downloading from the orginal disk then trying to activate, but my
serial no. is no longer recognised. Tried phoning the technical
help at Adobe but they just referred me here! Can't attempt to
transfer the licence from my old machine as a) it died completely
and b) I no longer have it!
Chris

No.
(64350)

Similar Messages

  • Need help in activating CS5 on a new (3rd) computer.  Old laptop is inoperable.

    need help in activating CS5 on a new (3rd) computer.  Old laptop is inoperable.

    Hi,
    see >>> http://helpx.adobe.com/creative-cloud/help/install-apps.html here >>> How many computers can I install on
    I quote: You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
    Hans-Günter

  • Can't get Contribute to Create New Page

    Can't get Contribute to Create New Page
    --Have 'tried' all options for 'new page' - button, File>,
    and Ctl + N
    --Have tried via each of my different websites
    --CAN Edit existing pages!
    --Established myself as Administrator, and Publisher
    --Downloaded "Update" & ran "Repair" option
    STILL Can't open a "New Page"!!!???!!!
    Can anyone help?

    I don't suppose you ever found an answer to this problem?
    I've got exactly the same on a laptop: Desktop is absolutely
    fine.
    As in your case the software works 100%, but you simply can't
    create a new page (across all sites). Crazy - no error message, no
    nothing.
    I did make the fatal error of installing a demo version of
    the software before buying the real software, so I did have to go
    through 6 pages of A4 instructions to try to get the read software
    to install... perhaps this is a vestige of that???

  • Activating NM on a new computer

    I am trying to activate NM on a new laptop. I have a paid license for NM and I have the key from the original install. When I try to activate I get a message stating that the key is invalid. I followed the instructions in item 10 of the NM FAQs in the Advisor and it still will not activate. 

    Thanks Hal but I do not have it on the computer any longer.
    Hal P Anderson <[email protected]> wrote:
    Hal P Anderson http://forums.adobe.com/people/Hal+P+Anderson created the discussion
    "Re: Activating LR on a new computer"
    To view the discussion, visit: http://forums.adobe.com/message/4040202#4040202

  • Oracle event alert not activated after fndload to new environment

    Hi,
    Oracle event alert not activated after fndload to new instance, it works in the development instance, checked that the SQL should return row, any hints please.
    Thanks,
    CY

    Please post the details of the application release, database version and OS.
    What was the command used to download/upload the alert?
    Please see if the following docs help.
    Alert Is Not Working After Uploading By FNDLOAD (Doc ID 1087572.1)
    How to transfer alert definition from One Instance to another instance using cmdline script (Doc ID 400295.1)
    How can you move an Oracle Alert from one instance to another from the Operating System level? (Doc ID 376891.1
    Thanks,
    Hussein

  • Activating LR on a new computer

    I have purchased LR2 and updated to LR3. I now am trying to activate LR3 on a new computer. I downloaded the free trial and when it asks me for a serial number I put it in and it accepts but also says It is a upgrade # and needs the original serial number which I do not have. Is there anything I can do?

    Thanks Hal but I do not have it on the computer any longer.
    Hal P Anderson <[email protected]> wrote:
    Hal P Anderson http://forums.adobe.com/people/Hal+P+Anderson created the discussion
    "Re: Activating LR on a new computer"
    To view the discussion, visit: http://forums.adobe.com/message/4040202#4040202

  • De-activating CS6 from a new laptop which is NOT in my possession

    I recently bought a new Toshiba laptop and de-activated Photoshop CS6 from my old laptop and re-activated it on the new laptop.  The new laptop is faulty - at the moment it is with a Toshiba Agent, who can't repair it.  Toshiba is refunding the cost of this faulty laptop.  They are wiping the drive clean next week.
    My problem is;  how do I de-activate CS6 from the new faulty laptop, which I no longer have?  Also, I don't know whether to re-activate it on the old laptop, or wait until I can purchase a new laptop again.  Is there a limit to how many times CS6 can be de-activated and re-activated?  This software is already on my desktop, so the enquiry is about the software being on 2 machines.
    Regards
    Pam J

    For problems like that you need to deal with Adobe Customer Support.  This ias a user forum site not Adobe support.  Adobe support is not all that it should be however they are set up to handle problems like yours.   Disk crashes are common and I have had to deal with Adobe support for a couple of Head crashes over the years.  Each of my activation problems were handled with one phone call  to Adobe customer support.  The hardest part these days is to find the Phone number.  Adobe.come does its best to make it hard to find.  Google knows the number start there.
    Install CS6 call Adobe during the activation process they can help you activate the install.

  • How to I register Contribute to my new computer?

    how to I register Contribute to my new computer? 

    Hello Jim
    Thanks for replying. Yes, I have Lightroom 5 installed on my current (old) iMac computer. I have just purchased a new iMac and wish to download Lightroom 5 to it.
    The serial number of my copy of Lightroom is: 116040019422909841438915.
    I also had the program installed on a Mac Book Pro which had an unfortunate encounter with a spilled glass of Coke. Somehow, I got in touch with an Adobe technician in India who sent the program via the internet to be installed in a replacement laptop computer. Hopefully, the same can happen for the new iMac.
    Looking forward to your reply,
    Tim Johnston

  • Data not going from active data table to new data table -DSO activation iss

    Hi Experts,
    Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
    There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
    Apart from that..to  DSO 2 there are 4 other DSO sending data.
    I tried to send single record and saw that data is going

    Hi Experts,
    Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
    There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
    Apart from that..to  DSO 2 there are 4 other DSO sending data.
    I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
    Please suggest.
    Regards
    Sudha

  • Error while activating objects copied into new namespace.

    I am receiving the following error when I am trying to activate objects copied from an existing namespace to new namespace.
    What could be the reason ?
    Activation of the change list canceled Check result for Message Mapping MM_BBP_ESI_ERP_CONTRACT | http://frictionless.esource.com/v2.1:  Namespace http://frictionless.esource.com/v2.1 is not defined in the software component version FCI, 1.0 of frictionless.com   Namespace http://frictionless.esource.com/v2.1 is not defined in the software component version FCI, 1.0 of frictionless.com

    Hi,
    How about activation namespace objects in tab "Change List"?
    Regards,
    Jakub

  • How do I install Contribute on a new laptop (2nd workstation)?

    I have updgraded to Contribute 6.5 on my desktop (main) computer.  I need to be able to use it on a new laptop as well.  How do I go about doing this?

    You would do it the same way you did on your desktop. You'll need to transfer the install file to the laptop so you can run it.
    If that isn't what you are referring to, could you give more detail about what you have (install file, CD...etc) and what you've tried already?

  • Postings are made to old activity type but not new in Process Order.

    Hi friends,
    We have created old activity type and assigned. However, the postings are made to old actity type.  There is no plan price for new activity type.
    So please suggest whether I missed any thing here.
    Thanks,
    Venkata Raju
    Edited by: venkata raju khottari on May 14, 2009 11:35 AM

    Your information is very vague, and incomplete.
    I assume you created a new acivity type, and not an old one? Where did you assign it? KP26, KP06, C203?
    Did you recalculate your plan activity prices? KSPI. Download new qties? KSPP....

  • Clicking on 'ADF Calendar Component activity' should navigate to New page

    Jdeveloper Version - 11.1.2.0.0
    We implemented the ADF calendar component and it displays fine. However, we have a requirement that by clicking on the activity, it should navigate to another new page. For an activity, there are options like contextMenu, acitivtyHover, activityDetail etc.., where all shows the details in popup of the same page. We want to navigate to new page by clicking on the activity. Is it possible?
    Thanks in Advance.

    Hi,
    I don't think it is possible.
    All the facets you mentioned support only af:popup as child to them.
    http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_calendar.html
    -Arun

  • Query on DNS setup for Active Directory for a new data center

    I have third party DNS appliances providing DNS Service for Active Directory (Windows 2008 R2) and there are also secondary DNS servers, which are MS DNS server with a secondary zone configured, for redundancy. I have to setup a new data center
    and move servers/services to this data center. In this scenario, can I install a new Microsoft DNS server with a secondary zone and use this as the primary DNS Server for all the member servers at this new location ? I am aware that this new DNS server will
    not be able to make any updates to the secondary zone and for that purpose, is there anyway to redirect such requests to the DNS appliances in my current data center across the WAN ? I am trying to avoid purchasing a new DNS appliance for the new data center
    and want to know what are the alternatives I have.
     

    im not entirely sure by your setup, as normally you would use AD integrated zones for DNS in an AD environment - although there are other options as you have already setup.
    the fact the zone is a secondary zone in DNS server terms doesn't mean you can't point your clients to it as their primary dns server. They will quite happily resolve names using a secondary server.
    so as long as your dns devices are correctly setup to support the additional secondary zone I see no reason why you couldn't do this.
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • Active Dataguard switchover puts new standby in real time query

    Hi Gurus,
    If using Active Dataguard ,after swicthover/failover using dg broker and observer does sthe new standby will be put in real time query mode(ADG) or manually have to open the db in read only mode.
    Please let me know.
    Thanks

    Yes it does:
    [uhesse]$ dgmgrl sys/oracle@prima
    DGMGRL for Linux: Version 11.2.0.1.0 - Production
    Copyright (c) 2000, 2009, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    Connected.
    DGMGRL> show configuration
    Configuration - myconf
      Protection Mode: MaxAvailability
      Databases:
        prima - Primary database
        logst - Logical standby database
        physt - Physical standby database
    Fast-Start Failover: DISABLED
    Configuration Status:
    SUCCESS
    DGMGRL> show database physt
    Database - physt
      Role:            PHYSICAL STANDBY
      Intended State:  APPLY-ON
      Transport Lag:   0 seconds
      Apply Lag:       0 seconds
      Real Time Query: ON
      Instance(s):
        physt
    Database Status:
    SUCCESS
    DGMGRL> switchover to physt;
    Performing switchover NOW, please wait...
    New primary database "physt" is opening...
    Operation requires shutdown of instance "prima" on database "prima"
    Shutting down instance "prima"...
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    Operation requires startup of instance "prima" on database "prima"
    Starting instance "prima"...
    ORACLE instance started.
    Database mounted.
    Database opened.
    Switchover succeeded, new primary is "physt"
    DGMGRL> show configuration
    Configuration - myconf
      Protection Mode: MaxAvailability
      Databases:
        physt - Primary database
        prima - Physical standby database
        logst - Logical standby database
    Fast-Start Failover: DISABLED
    Configuration Status:
    SUCCESS
    DGMGRL> show database prima
    Database - prima
      Role:            PHYSICAL STANDBY
      Intended State:  APPLY-ON
      Transport Lag:   0 seconds
      Apply Lag:       0 seconds
      Real Time Query: ON
      Instance(s):
        prima
    Database Status:
    SUCCESSKind regards
    Uwe Hesse
    http://uhesse.wordpress.com

Maybe you are looking for