Activating data sources in r/3

hai,
when i tried to activate a data source in r/3, it says an information ."warning has occurred (see log)"with the messege number R8281,whereas other datasources are activated ....can you tell me what does it mean and how to correct it please...
Edited by: siva perumal on Jan 30, 2008 11:10 AM

Hi
You can just ignore the warnings.It will not impact on any results.
Regards'
Chama.

Similar Messages

Error while activating data source in BI

Hello Team
I am facing issues while activating data source. I followed following steps .
a)First i created my target
b)Then i made my Primary key as info provider
c)Then i created one source system under file.
d)Then i went to data source and created one application component
e)In this application component i created my data source
f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Error while activating Data source

Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
Bbee

Hi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT

Table for List of Active Data Sources

Hello All,
I have a requirement like, to collect List of Active Data Sources from which extractions are happening for the past one year.
Actually i have many Data sources which are in Active State but extractions are happening only on some of the Active Data Sources.
I can collect List of Active Data Sources from Table RSOLTPSOURCE, but how to collect Active Data Sources from which extractions are happening for the past one year.
Is there any such table which satisfies my requirement?
Thanks in Advance!!

Hi Srikanth,
I had similar kind of requirement in my project and I used following approach,
1) We already had a list of all the process chains which extract data from source system. So you also need to get such list if you don't have then goto RSPCLOGCHAIN and get the list of all the active chains.
2)after that goto table RSPCCHAIN and for all of your chains or for a single chain you can put the TYPE as "loading" and you will get list of all the infopackage.
3) Once you get the list of all the infopackages which are loading data from your source system.
4) goto table RSLDPIO and put all your infopackage name and source system you will get the list of all the datasources in OLTPSOURCE field.
Regards,
Durgesh.

Error in activating data source

Hi Gurus,
I'm facing error when generating data source stating "THE OLTP SOURCE STILL HAS ERRORS"
when i activate my structure in "se11" it is activating .
could you tell me how to get rid of this error............
Regards,
Vijay.

HI Siva,
I faced this problem with refernce fields...........
I've given wrong refernce so this was encountered......
Check u'r refenc fields..................
regards,
Vijay.

Warning while activating data source 0BBP_TD_CONTR_2

Hi Friends,
We are installing some business content data source from SRM system and while activating the data source of purchasing contracts (0BBP_TD_CONTR_2) we are getting the below warning message
"The even-numbered length of the DEC field PS_TH_AVAIL_AMT can lead to problems".
We have checked the field PS_TH_AVAIL_AMT and found its having the length of 20. Also it seems to be an standard field its not allowing us to change the size
Though we can consider its an warning we have received only 0 records in the extractor (RSA3) even the data source is in active state in RSA6.. Data is not being fetched due to the above warnings?
Please suggest and help us on this if someone have faced the similar kind of issue..
Regards,
Saravanan.M

That warning not causing as of now.
Ask your source team to maintain some data and later do the extraction at RSA3.
But in future it may cause if your field PS_TH_AVAIL_AMT value is more length than defined.
So ask your source team and find what is the maximum length of that value going to use/enter at source side.AS i know source team may enter the value as per the limits. But if you fill that field thru any calculations that may causes you.
Even there itself it mentioned SAP note. so please go thru that and use it in future if caused field PS_TH_AVAIL_AMT length.

Time out while activating Data Source

Hi All,
I am faced with a problem. I am trying to load a cube from a flat file Data Source. I create the data source and save it, but when i try and activate it...it just keeps running for a long time and gives a timeout error.
I have created Info Objects and even a Info Cube...i am able to save and activate them without a problem, its only the data sources that give me this problem
Can somebody throw some light on this issue.
Thanks
Ravi.

Hi,
can u plz paste ur error here .. It helps us to answer in a better way .
from ur posted message .. try this ..
change parameter icm/keep_alive_timeout .. but u need to bounce the system as it not dynamic parameter.
Thanks

Data source activated in RSA5 but error in RSA3

Hi,
I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction Message no. RJ012").
Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
Thanks
Arunava

Bhanu,
Thanks again for your super fast reply. This really solved my issue.
However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
I would really really appreciate.
Thanks
Arunava

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error while deleting data source : Message RSO414

Hello Guys,
We have activated data source 2LIS_04_PKKANBAN and entire standard BI content . When i tried to extract data, i got 0 records initially and after that i came to know that some functions needs to be activated in ECC to extract KANBAN data.
We activated some function and deleted & filled setup tables for KANBAN and i can see data in RSA3 (368 Records). Then i tried to extract data into SAP BI. it took me 20 minutes but ended with error. "Data Source needs to be activated again as it was changed (We just activated one function only) nothing changed to data source" I activated data source again in ECC and replicate on SAP BI side but i am not able to get it in activated mode.
I tried to activate it manually and it takes 20-25 minutes but i am not able to activate it and getting error "Error when activating DataSource : MESSAGE NO RSO414 " "Error when resetting DataSource 2LIS_04_PKKANBAN to the active version". i also can't delete data source as when i try to delete it, i get the error "ERROR WHEN DELETING DATA SOURCE : MESSAGE NO RSO414" . What to do in this situation ?
Regards,
Komik Shah

Hi Rahul,
I tried it but it didn't help me.
Also there is no FM in SAP BI called RS_DATASOURCE_ACTIVATE_ALL. I have activated data source in my ERP system and replicated same on BI side as we don't have standard Transfer Rules or Transformation, i can't use RS_TRANSTRU_ACTIVATE_ALL .
Regards,
Komik Shah

Data source inactive in the quality system

Hi all,
I transported R/3 datasource from DEV to QA and replicated datasource in to BWQ but the datasource in QA is inactive eventhough it is in active mode in R/3 QA system. When I checked the RSOLTPSOURCE table there is no entry for my datasource. When i try to transport the transfer rules it is giving error 'DataSource xxxxxxxx does not exist in source system XYZ of version A'. How to activate the datasource in BW quality system.
Could any one help me to resolve this issue.
Thanks in advance.
Mandadi

Hi,
Firstly nly the active data sources in the source system will be available for useing in the bw.
R/3 check whether the datasource is active or not. If not active activateit.
If active , on the bw side replicate that particular datasource. and activate it again through program <b>RS_TRANSTRU_ACTIVATE_ALL</b>
Hope this helps
Janardhan Kumar

Data source Replica

Hi Gurus,
How to collect Data source Replica in a trasport request
iand what is 'Data source Replica'
how i can see the 'Data source Replica' under a transport request
Please ...........
Thank you

Hi,
When you activate the data source on the r/3 side, you end up capturing it in a transport request.
However on the BW side you go on and replicate the activated data source. On most times you are not prompted to enter the transport request when you replicate the data source. However if prompted, capture the data source where you capture the transfer rules. You will not find anything like data source replica under that request, but you will find data source and your data source will be under it.
hope this helps.
thanks,
rahul

Inactive data source

hi,
how can i make an active data source as inactive in lbwe.
plz help me.
regards,
SK

Hi Yunus,
Just goto LBWE.Search for your datasource.If your data source is Active you will find "Active".Just click on that.It will turn into Inactive.
Hope this helps
Regards
Karthik

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Active version of BW Data Source Dev Appears inactive in Q

Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PM

Hello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

Activating data sources in r/3

Similar Messages

Maybe you are looking for