Activating Deleted component in CJ20N

Hi,
In project hierarchy material component is deleted. Is it possible to remove deletion status of component and make active agian.
Regards
Nilesh.

Hi anilkumar,
1. If all are activated, thats ok, not a problem.
2. go in CMOD,
   type your project name.
3. Then see COMPONENTS
4. In the output,
   there will be 2nd column
IMPL = IMPLEMENTED
5. U will see that
   there will be GREEN TICK
along side the FM, which u have code.
6. For rest, it will be BLANK.
regards,
amit m.

Similar Messages

Where can customize the screen of the component in CJ20N

now the user need to customize the component assigned to the Activity in CJ20N.
where can customize the screen of the component in CJ20N?
Please explain me all the steps to be required.
Thanks in advance!

Hi,
unfortunately there is no field configuration for components of networks.
Kind regards
Peter
PS: only possibility would be a modification -> see notes 114390 and 100180.
Edited by: Peter Kratz on Apr 23, 2009 9:38 AM

Report Cost of Operation Activity and Component

Hi Gurus,
Is there report to list cost of Operation Activity and Component in the same report (not in separate) ?
In our environment "operation activity" show Labor Cost and "Component" show material cost. If one by one of document we can see it in each document. The requirement is to see in a list of documents that contain labor dan material cost in the same report.
When use IW49N, only show cost of "operation activity" not include cost of material used.
Regards,
Tri W

duplicate.closed.

FM for deleting Component from Ibase Hierarchy

Hi,
Is there any FM for deleting Component from Ibase Hierarchy.
I have tried using the FM "CRM_IBASE_COMP_DELETE", it is anyway deleting the component from the hierarchy but not those component
whose is already assigned to a Contract.
I have read these similar thread of only deleting a component but it was not very helpful in my scenario.
In CRM, standard way of removing the component from Ibase Hierarchy is to "CUT" the component and save. The mentioned component will not
be seen in Ibase hierarchy.
So is there any FM which can actually remove or cut the component from the hierarchy even though it is assigned to any contract etc.
Awaiting for your expeditious help on this issue,
Thanks and Regards,
Jojy

Hi Naresh,
Thanks for your response,
Is there any way of doing the same from Std. FM apart from doing it manually.
Mine is Interface scenario in which the call will be instantaneous.
I have tried to dismantle the component also, but it will be remain present in Ibase hierarchy even though it is associated to any contract or not with dismantle sign in it's hierarchy .
I want to cut it so that it will not remain in Ibase hierarchy, it can be present in CRM system.

Deleted Component appearing in BOM

Dear Guru's,
I m facing a strange situation where i have a BOM of material with one component and then i came to knw that,that material is not required any more so i removed the component and deleted the BOM.
But when i am running the MRP it is showing the deleted component,i am not able to understand hw it is happening.
Kindly throw some light on this.
With Regards.

check in md04 of that bom component, is there any dependent requirement.May be mrp for that header material
was carried out earlier before your bom change and later you have run mrp for components individually.
Do one thing run mrp - single item multi level for your header material again with planing mode 3 - delete and recreate planning data.
Regards,
Dhaval

Run-time error '429':Active X component can not create an object

Hi Folks,
I am using some VBA code to run logic in BPC for Excel. When i try to click on VBA button, It's giving the below error.However when i am trying to execute same from server it is working fine. Accessing from BPC client only we are facing this problem.
Code have no issues. Is there any specific thing need to mentioned in client when we use VBA programming? Basically we used the VBA program to create the id's in BPC for Excel. So that it will automatically created on fly. Testing was fine interms of working in Server.
" Run-time error '429':Active X component can not create an object ."

Hi,
Are you trying to add a member into the dimension from excel? As you said that this has been already tested in the server and is working fine, I believe, you have taken care of everything.
Now, coming to the point, when you are adding a member in the membersheet, you need to process the dimension. This requires the admin rights. So, please check the task profile of the user ID, with which you are trying from your system. This user ID should be the primary admin.
Hope this helps.
Additionally, can you please elaborate on the steps on what you followed for adding a member from the excel directly?

Active desktop component

My java applet does not display on WinXP desktop on setting it as active desktop component. I have set the .html file containing the applet as active component.
Otherwise the browser shows the applet fine.
please somebody help me.

Well : Double-post can sometimes bring more results, but people generally don't like this point of view... Althought, I suppose you perhaps just failed to retrieve your own post ;)
Because I am still looking for a soluce to this damned problem too, there will be nothing more there, but in case of, here is your other post about this problem :
http://forum.java.sun.com/thread.jspa?messageID=3840323
I must add that I have myself written in a thread about this problem; the thread is initially about the conversion Image > BufferedImage and contains the code of the applet I am trying to make work as an active desktop...
http://forum.java.sun.com/thread.jspa?threadID=628534&tstart=240
Thanks to all those who begin to feel lost in all these threads : I hope we'll be more efficient the next time we'll have to ask for some help !

While deleting project from CJ20N entries are not deleted from table PRPS

Hi,
I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
Any deletion Flag should also be checked?
Thanks in advance!
Regards,
Jyoti

Hello,
Thanks for reply !
My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
Why they are appearing in PRPS table and how it can be deleted?
Thanks !

Active Form Component Rules

Active Form Component Rules
Hello,
Though we upgraded to 2008.3 last November, we haven't used AFC rules so far so i was just curious how AFC rules are coded/implemented ? Do they perform checks using client-side scripting of server-side ?
Thanks
Mihir

think of AFC rules as newScale writing javascript code for you. As a matter of fact its pushe dto the client as a .js file
You have both client and server side scripts (Data retrieval)

How to restor deleted component

Hi experts,
Help please, I'm new in CRM 7.0 and i accidently delete component IUICOBJD, when i was trying to delete an enhancement of this component, any body can tel me how to recover this component?
TKX.

Hi Napoliste,
I have not tried it myself since I'm too afraid to break the system, but here's something you can try:
When you have deleted the component, you have deleted the BSP application.
Go to trx SE95 (modification browser) and select tab Reset Objects, check the Deleted objects checkbox.
Go to either: Deleted Objects -> Web Objects
or
Without Modification Assistant -> Web Objects
There you should find your deleted BSP application, try to reset it to original (and the underlying objects as well if needed). When you're done you can choose refresh and if all went well the objects are gone from the list.
Let me know if it worked!
Cheers, Roel

I lost my Ipad 5 and requested delete all from find my phone, fortunately they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

I lost my Ipad 5 and requested delete all from find my phone, they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

The iPad should be asking you for the Apple ID and Password when you turn it on.

Run time error '429' Active X component can't create object

Hi,
After installation of BI+, when i am trying to start the Financial reporting studio, I am the error'429' " run time error Active X component can't create object.
I thought of stoping and stating the BI+ Core Services it is not allowing me to do that,
Could you please help me in the installation BI+
thanks,
sudhakar

Hi Johan,
BI core services up and running, but still it is giving " cannot connect to GSM server server name"
all the configaration went with green, Could please let me know other oprions or where I can find the error.
Please let us know possible mistakes, I will try that options,
thanks a lot John
thanks,
sudhakar

How to clear/delete component information(History) from Indd??

How to clear/delete component information(History) from Indd??

I think Jong was telling you that your question was very not clear.
(And I agree with him!)
I'm assuming you are talking about the document history available by
command/control clicking on "About InDesign" and/or plugin history.
The only way to clear out that data is by exporting as inx/idml...
Harbs

Active dektop Component

My applet is running fine in a browser window, but on setting it as active web component (in fact the html page containing the applet is set as active web component) on Win XP desktop it displays nothing more than a grey area. do we need some additional code here?
can anybody help me ?

The soluce I have found is due to you in a first time, and to this other post :
http://forum.java.sun.com/thread.jspa?threadID=611713&messageID=3369826
I will here explain in details all I have done to bypass the problem of displaying my java 1.5 applet on the active desktop of windows XP (pro sp2)
I was originally guessing the problem was due to some bad version of the JVM in the microsoft VM. I have then read some articles on Microsoft official website but in vain, they seems to be still in dark-age (huh !)...
I am now using JBuilderX ( JBuilder2005 looks like to me and my little java-level an odd update ) and as my applet uses packages and lot of directories, I wanted not to use "javac -target (...)" but instead find some options in Jbuilder. The only things was to change the JDK in use when compiling of the project... ( TOOLS >ConfigureJDKs... )
I have then prey the time to install JDK1.1 on my machine, and then, with new compilation, I have tried again to put my applet in Active directory.
READ THIS BEFORE : It does not work at all, please don't do or you will have to uninstall olds JDK !!!
Okay, no-matter, let's try something else : Compiling with the default-JDK of JBuilderX ( JDK1.4.02 ) and, with the "HTMLconverter.exe" found in the subdirectory "BIN" of this same JDK, converting my HTML file gave me some results : Now, adding my web-page in windows display-properties ( Desktop > Tunning... ) -AND NOT directly in choosing my HTML as background- was nearly working :
The grey rectangle was now away, and my applet was now displaying... but not refreshing !!! Well, my applet shows an analogic clock, and the refresh was done every five seconds instead of being done every seconds !
Well, before doing anything else (modifcate my code, etc... ), I wanted to retry the same thing with the last new JDK1.5.01...
And : COOL guys, it is now working like never before; the refresh is well done.
Some details about what I have done exactly :
I have installed new JDK ( Be careful : When it is upadting to JDK1.5.04, sometimes the directory JDK disapears : No, I am not joking ! I have had to re-install JDK 1.5.01 after updating to 1.5.04 because I was then only finding JRE and no more JDK (?!?!?!?) )
In the directory "BIN" of the JDK1.5.01 ( perhaps also for 1.5.04 with some luck... ) you will find "HTMLconverter.exe". Execute it, give it the path of your HTML-page and apply.
If you are using JBuilder or others programs ( Eclipse, etc... ) find the option to compile with new JDK1.5.01, and then re-compile your applet... If not, be sure to use JVM1.5 to recompile ! ( Read more on %PATH windows if you need )
Then finally, go to the properties-display ( see upper ) to (re-)apply your web-page to active-desktop. It should be nice.
Only to understand what has been done by HTMLconverter.exe, here are the old HTML code, and the nex HTML code :
the OLDest way to incorporate Applet :
<html>
 <head>
 <title>
 Page HTML pour inclusion d'une Applet Java (1.5) pour Active Desktop XP
 </title>
 </head>
 <body>
 <center>
 L'Applet clockeDesktop apparaîtra ci-dessous dans un navigateur Java...
 
 <applet
 archive= "TimingDesktop.jar"
 code= "horloge/Horloge.class"
 name="clockeDesktop"
 width="800"
 height="600"
 >
 IMPOSSIBLE d'afficher l'Applet : Votre navigateur n'est pas compatible java.
 </applet>
 </center>
 </body>
</html>
And then, the NEWest way to incorporate applet :
<html>
 <head>
 <title>
 Page HTML pour inclusion d'une Applet Java (1.5) pour Active Desktop XP
 </title>
 </head>
 <body>
 <center>
 L'Applet clockeDesktop apparaîtra ci-dessous dans un navigateur Java...
 
 

<object
 classid = "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
 codebase = "http://java.sun.com/update/1.5.0/jinstall-1_5-windows-i586.cab#Version=1,5,0,0"
 WIDTH = "800" HEIGHT = "600" NAME = "clockeDesktop" >
 <PARAM NAME = CODE VALUE = "horloge/Horloge.class" >
 <PARAM NAME = ARCHIVE VALUE = "TimingDesktop.jar" >
 <PARAM NAME = NAME VALUE = "clockeDesktop" >
 <param name = "type" value = "application/x-java-applet;version=1.5">
 <param name = "scriptable" value = "false">
 <comment>
 <embed
 type = "application/x-java-applet;version=1.5" \
 CODE = "horloge/Horloge.class" \
 ARCHIVE = "TimingDesktop.jar" \
 NAME = "clockeDesktop" \
 WIDTH = "800" \
 HEIGHT = "600"
 scriptable = false
 pluginspage = "http://java.sun.com/products/plugin/index.html#download">
 <noembed>
 IMPOSSIBLE d'afficher l'Applet : Votre navigateur n'est pas compatible java.
 </noembed>
 </embed>
 </comment>
</object>


 </center>
 </body>
</html>Try to edit manually your HTML if you prefer, but HTMLconverter.exe is easier and is a well done appli.
Last thing I have to write : If my applet now displays fine when I choose "Tunning" in the "Display-properties>desktop" options , it is doing errors when I try to use my web-page directly as the background.
It does not this with page using FLASH or SVG, then it comes from JAVA and msVM again ! Someone has an idea ?

Applet as active desktop component

My applet is running fine in a browser window, but on setting it as active web component on Win XP desktop it displays nothing more that a grey area. do we need some additional code here?
can anybody help me ?

Hello : Sorry but I cannot help you; I have the same problem with my own applet, and I am still looking for a soluce, like you : One thing is sure, it is possible to do it; In fact I have tried with some well known applets :
http://www.kylyria.net/kylyria_tutorial/tutorial.htm
( Snif : The code for the applets linked are not given ! )
I just still don't understand why theirs are working, and not ours...?
If I find something helpful, I will come back here and I hope you'll do so : )

Activating Deleted component in CJ20N

Similar Messages

Maybe you are looking for