Activating EA-FS for ECC 6.0
Hello,
we want to activate extension set EA-FS (just on testsystem) - Does anybody know the effect for support packages also regarding year end packages?
And does anybody know if it is possible to deactivate it again?
Thanks for your help.
Best regards
Karin Höfer
Bill,
The EA component has various effects, some of them have been labeled as side-effects by the users (probably because they are recommended to be irreversible)!
Some of the incremental functionalities included in EA-FIN are (with relevant note nos.):
- Flexible Real Estate Management (RE-FX) (# 829676)
- Enhanced Bank Statement Processing (FEBAN) instead of the standard Bank statement processing (FEBA)
- Revaluation of Consumption (# 631395)
- Some corrections for RE-FX component (# 626056)
- Asset Financing & Leasing Solution (# 786590)
- Intercompany Reconciliation - t.code FB2E in SAP menu (# 823533)
- Accrual Engine (# 809831 & # 633924)
- New Depreciation Calculation (# 988238, # 1113840, # 1078619)
There are, of course, lots more. Some functionalities are as simple as making the menu paths available in SAP Easy Access menu (they are anyway available if you know the relevant T.Codes, but not accessible through the Easy Access Menu, till you activate the Extension Set).
I personally haven't come across any experience where activating the extension set would have had dramatic problems - except some minor hiccups, where the "old ways of working" don't work as expected, anymore! In fact, more often than not, the extension is activated after primary system is Productive !
If you've done your homework on SDN / OSS, I believe you should be good to take the plunge.
Like always, there are OSS Notes you'd need to apply immediately after you activate the extension (e.g., 1067468, for the new depreciation).
Hope this satisfies your appetite for information. I hope you'd have gone through # 1121965 (Documentation Enterprise Extension EA_FIN).
Remember to assign points if found useful.
Regards
Gulshan
Similar Messages
-
E-Recruiting - active on both central ECC + Standalone box and integrated?
Hi,
Can someone tell me if the following landscape is possible with E-rec? (we are installing ehp4)
a) Our central ECC system with the E-Rec component activated. Used for internal recruiting.
+
b) A standalone E-Rec box , connected and integrated via ALE to the above central ECC system. Used for external recruiting.
So we now have have E-rec activated on both systems with the standalone one integrated into the ECC6 one where E-rec is also active.
Will we have all the functionality of E-Rec/Talent Mangement availalble in this landscape? Will the manager via the Recruiter business packages and MSS be able to use all functionality seemlesly with all data merged between the systems? Do you think all BI reporting on E-rec will work as it suppose to?
We want to be able to integrate and use the data from both systems as a single unit with standard SAP functionality. We only want to physically seperate where the external and where the internal users log on to.
ThanksHello,
My suggestion to you would be to have the ECC server upgraded to EHP4, activate E-Recruiting and have it inside the firewall as the back-end server. Recruiters and Managers accessing through portal will access this system. You will have the other server as the front-end server with E-Recruiting. Candidates will update their information in this front-end server, which will in turn update the back-end server through an RFC. This can be achieved through configuration if you check in SPRO.
There is no such thing as external recruiting or internal recruiting to some extend. What you have is external and internal candidates in the same talent pool. It is when you post to candidates where you can select whether you want internal candidates only to apply or external candidates. The external will not see internal postings and vice-versa when they search for jobs. External candidates will login from the internet while internal candidates will login from the portal. Your candidate's information will be residing in both systems but the backend will be updated through an RFC.
In this case the BI will work as normal. I hope this will help you - but this is my opnion.
Best Regards, -
Unable to find any active legal regulations for determination proc. "TEST1"
Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
CarlHi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl -
Active business functions for IS-OIL Downstream
Dear all,
I have system NW701/ECC6, and upgrade EhP4.
Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS, I found a lot of business functions:
BUSINESS_FUNCTION_BASIS_COM Business Function Basis (COM)
COMMODITY_MGMT_&_BULK_LOGISTIC Commodity Management and Bulk Logistics
COMM_MGMT&BULK_LOG_1 Commodity Management and Bulk Transports
ISR_RETAILSYSTEM Other Enhancements for SAP Retail
LOG_COMMODITY_TRANSPORT_MGMT_4 Commodity Management and Bulk Transports 2
OIL_PRODUCTION Upstream Production Management
OIL_REVENUE_ACCOUNTING Upstream Revenue Accounting
REMOTE_LOGISTICS_MANAGEMENT Remote Logistics Management
Can any one help me, what business functions do I need to active for Downstream ?
Thanks all,
Thanh.I create customer message ask SAP and these are downstream functions need to active:
1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
3. COMM_MGMT&BULK_LOG_1 (EhP3)
4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
Thanh. -
Http RFC destination for ECC to PI Connection Error
Hi,
While doing the proxy runtime configuration http RFC destination for ECC to PI .
I configure the RFC destination as below ---
Target Host -- PI Host
Service No -- 50000
Path Prefix --- /sap/XI/engine/?type=entry
Login Security Details
User Id -- PI user id
Password --- PI password
While doing the Connection Test , I got the error "ICM_HTTP_CONNECTION_FAILED"
I checked T-code in ECC system SMICM and ICM is in green status and I checked the services are activated in SICF transaction.
Please let me know how to resolve this issue.
regards,
RohitHi Rahul,
I checked all service are activated in SMICM and I configured the FQDN also.
Now I cofigured the Service No --- 8000(http port no of PI) instead of 50000(J2EEport no of )
Target Host --- hostname
and did a Connection test...then I am getting a status as "http reponse 500" and status text as "empty http request received".
pls let me know is it correct configured or not.
regards,
Rohit -
LDAP Configuration for ECC 6.0 ( ABAP Stack only)
Hi,
Can any one guide me with the steps for the LDAP Configuration for ECC 6.0 ( Abap stack only).
Some of my observations are....
I can see the LDAP Support in the Installation master at the following path.
1. Additional Software Life cycle Tasks --> Application Server --> LDAP Support.
But the prerequisites for this task is given as "You must have extended the LDAP schema for the sap data types before.".
When i am goint thru service market place i came across the following note.
Note 888848 - Notes on schema enhancement with RSLDAPSCHEMAEXT.
Thanks,
TanujDear All,
We are trying to configure the LDAP using with active directory . In the
step of "Synchronization of SAP User Administration with LDAP
Directory"when executing the report"RSLDAPSYNC_USER" we are facing one
error.
Please find the trace file and error screenshot in the attachment.Please help us on
priority.
Please find the Trace log in the below:
RFC destination : LDAP_LDAPSE-01
Tracelevel : 8,704
F5: Shutdown F6: Clear list F7: Dump status F8: Refresh list
[Wed Jun 26 11:15:38 2013]
Slot 0 (WIPROTECH): >>> ldap_initU(host="abg-mumabc-dc1.abgplanet.abg.com", port=389)
[Wed Jun 26 11:15:39 2013]
Slot 0 (WIPROTECH): <<< ldap_initU() == <NOT NULL> := connected
Slot 0 (WIPROTECH): >>> ldap_set_option(version=3)
Slot 0 (WIPROTECH): <<< ldap_set_option() == 0
Slot 0 (WIPROTECH): >>> ldap_simple_bind_sU(dn="poornataad", password: not initial)
[Wed Jun 26 11:15:40 2013]
Slot 0 (WIPROTECH): <<< ldap_simple_bind_sU() == 0 := success
[Wed Jun 26 11:15:43 2013]
>>>>Required attributes table
Line 0: "CREATETIMESTAMP" (length 15)
Line 1: "MODIFYTIMESTAMP" (length 15)
Line 2: "SAPUSERNAME" (length 11)
<<<<Required attributes table
Slot 0 (WIPROTECH): >>> ldap_search_sU(base="CN=poornataad,CN=Users,DN=abgplanet,DC=abg,DC=com", filter="(&(OBJECTCLASS=user)(SAPUSERNAME=*))", scope=2)
Slot 0 (WIPROTECH): <<< ldap_search_sU() == 91
>>> ldap_msgfree()
<<< ldap_msgfree()
Slot 0 (WIPROTECH): >>> ldap_unbind_s()
Slot 0 (WIPROTECH): <<< ldap_unbind_s() == 0
Please find the error screenshot in the below.
Regards,
Dilip Sampath.CH
+91-9619735957. -
Activate Business areas for existing company (company code) for Ecc 6.0
Dear Experts,
I need to take a chance to ask about my requirement on Activating Business area for existing Company (one company code) in SAP Ecc 6.0, My client wants to open one more plant to do different business operations, he wants to see Trail balance and Financial statement individual business wise, hence this we need to activate Business areas to track Financial statement different business wise.
Note: Even though We are in ECC 6.0, client doesn't want to go Profit center wise segment accounting. he is mainly looking about Business area.
Kindly advice me to do this things in Ecc 6.0, Even I couldn't find T.codes for Business area adjustments through the path wise in SAP Easy Access screen Ecc 6.0. also what would I be taken precaution to do this scenario and what is the impact once i activate Business areas for existing company(one company code)
Thanks
Madhusudhan.BDear Experts,
Please look on this issue........!
I need to take a chance to ask about my requirement on Activating Business area for existing Company (one company code) in SAP Ecc 6.0, My client wants to open one more plant to do different business operations, he wants to see Trail balance and Financial statement individual business wise, hence this we need to activate Business areas to track Financial statement different business wise.
Note: Even though We are in ECC 6.0, client doesn't want to go Profit center wise segment accounting. he is mainly looking about Business area.
Kindly advice me to do this things in Ecc 6.0, Even I couldn't find T.codes for Business area adjustments through the path wise in SAP Easy Access screen Ecc 6.0 (A1FS). also what would I be taken precaution to do this scenario and what is the impact once i activate Business areas for existing company(one company code)
Thanks
Madhusudhan.B -
Unicode Compatability is a pre requisite for ECC 6.0
Hi all,
Can any body send me any link or any document which says tht Unicode Compatability is a pre requisite for ECC 6.0. its really urgent.
Regrads,
Ruchika sainiHi
see this
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji -
No active nametab exists for...
Hi,
I try to maintain BOM data by CSAP_MAT_BOM_MAINTAIN bapi. Everthing works ok when I use example code of this function module. But when it comes to terms deleting an item from BOM, I always get error :
"No active nametab exists for CI_STPO".
But it also deletes the item. Do you have any idea?
*---- BOM header data structure
data: begin of tstk2.
include structure stko_api02.
data: end of tstk2.
*---- BOM items table
data: begin of tstp3 occurs 0.
include structure stpo_api03.
data: end of tstp3.
DATA tstko TYPE stko_api01.
*---- Object dependencies table
* Basis data
data: begin of tdep2_data occurs 0.
include structure dep_data.
data: end of tdep2_data.
* Description
data: begin of tdep2_descr occurs 0.
include structure dep_descr.
data: end of tdep2_descr.
* Source
data: begin of tdep2_source occurs 0.
include structure dep_source.
data: end of tdep2_source.
* Sequence
data: begin of tdep2_order occurs 0.
include structure dep_order.
data: end of tdep2_order.
* Documentation
data: begin of tdep2_doc occurs 0.
include structure dep_doc.
data: end of tdep2_doc.
data: flg_warning like capiflag-flwarning.
*data : error_code type BAPI_MSG.
*- Initialize database log
call function 'CALO_INIT_API'
exceptions
log_object_not_found = 1
log_sub_object_not_found = 2
other_error = 3
others = 4.
clear tstp3.
tstp3-id_item_no = '0050'. "Item identification.
tstp3-fldelete = 'X'.
append tstp3.
*- Change BOM
call function 'CSAP_MAT_BOM_MAINTAIN'
exporting
material = MATNR
plant = PLANT
bom_usage = BOM_USAGE
valid_from = VALID_FROM
fl_bom_create = ' '
fl_new_item = ' '
i_stko = tstko
importing
fl_warning = flg_warning
o_stko = tstk2
tables
t_stpo = tstp3
exceptions
others = 1.
if sy-subrc eq 1.
*---- Error
* Please see log
ERROR_CODE = 'Tanu0131msu0131z hata. Baku0131m ekranu0131 açu0131k olmasu0131n?'.
endif.
if flg_warning eq 'X'.
*---- Please see log for information, warning messages, and success
* messages.
* MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
*WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
EXPORTING
msgid = sy-msgid
msgnr = sy-msgno
msgv1 = sy-msgv1
msgv2 = sy-msgv2
msgv3 = sy-msgv3
msgv4 = sy-msgv4
IMPORTING
message_text_output = ERROR_CODE.
Endif.CI_STPO is a customer include in which you can put some specific fields
probably you call a user-exit that is used to maintain fields of this customer include and it does try to find the structure of it (which does not exist) -
There are no active responsibilities available for this user
Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
BalIs the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini -
Transfer rules are not exist for ECC Quality source system in BI Dev
Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandraHi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks -
Help error on activation - No active nametab exists for SY
In ABAP web dynpro I create a SERVICE CALL. Everything looks ok, but when I activate this project,
it displays an error message as the following:
Web Dynpro Comp. / Intf. ZW_Test_BAPI, Web Dynpro Component Controller
No active nametab exists for SY
When I click on the error message, it brings my cursor to the import value of the component controller context.
What is going on here? Can someone help me?
ThanksChanged the type to something other than SY-datum
-
No active nametab exists for SY
Hi,
I have created a BAPI and it has IMPORT and EXPORT values. I have checked the REMOTE-ENABLED MUDULE redio buttoms.
This bapi works perfectly well for Java Web Dynpro.
I now create a ABAP web dynpro and create a SERVICE CALL. Everything looks ok, but when I activate this project,
it displays an error message as the following:
Web Dynpro Comp. / Intf. ZW_Test_BAPI, Web Dynpro Component Controller
No active nametab exists for SY
When I click on the error message, it brings my cursor to the import value of the component controller context.
What is going on here? Can someone help me?
Thanks
ASHi Anna,
I got the same problem with a customer of mine. I'm looking for a solution but I am unable to find anything at this moment.
I thought that regenerating objects from SGEN transaction would solve this problem. Also, I've checked inactive object in SE80 transaction but nothing yet.
Could you please tell me how did you solve this?
Thanks in advance,
Tomás Vírseda -
Enter a business location for ECC 6 EHP 5 (Taiwan)
Hi,
While releasing the billing doc to accounting we are getting the error Enter a business location
Message no. F5A192
We are working on ECC6 EHP 5 and this requirement is for Taiwan.
I have found the SAP Note; 376018, however this is valid for 4.6c ONLY.
Could you please check and advise is this note is valid for ECC 6 as well. Or do we need to apply any other notes.
Or any other suggestions.
Thanks & Regards,
Student.Hi,
Please check the below thread.
Error Enter a Business Location for Korea
Regards,
P Gomatheeswaran -
No Active Nametab exist for - while deleting master data
Hi,
We are deleting a master data record in production and while saving the master data we are getting an error like "No Active Nametab exist for". And while going back the screen it is giving an error as "Table /BIC/YZEMPLOYEE does not exist". How do we resolve this and is there any program to delete the master datAny help is greatly appreciated.
Regards
VijayHi,
Check this OSS Note 211492.
Hope this will resolve the issue..
Best Regards,
VVenkat..
Maybe you are looking for
-
What is "Error 42 at Print File.vi" in LabVIEW 3.1.1?
I have an ancient system running a LabVIEW 3.1.1 exe under Windows 3.1. It has worked for years, but now I get a popup "Error 42 occured at print file.vi" whenever it tries to print. I can click ok on this message and print the file just fine from
-
XI 3.0 and external Java client/web service
Hello, I'm desperately tryin' to get an external system to work together with XI 3.0. The setup is quite simple: The external system is nothing but a simple Java program sending SOAP-based requests to a webservice. It is based on AXIS and is running
-
How to invoke BPM object instance variable from interactive activity?
I have a screenflow with an automatic activity "A" followed by an interactive activity "B". "B" calls a BPM object "X" and uses a JSP presentation to show its attributes. Is there a way to use another BPM object, say type "Y", create an instance vari
-
Screen behaves strangely and the computer would freeze on wake up
Hi everybody. I have a problem. Sometimes after the starting chime and the apple logo grey screen, my mac would show for a few moments a strange screen with little white "rectangles" filling the grey space. (see image). Then, once that's what happen
-
How do I suppress scrolling of a ScrollPane via MouseWheel ?
Hi all! I'm trying to suppress the scrolling via MouseWheel if the user has pressed the control key at time of scrolling, but I'm not able to do it. It doesn't matter at which node I add the ScrollEvent handler. The problem is, the ScrollEvent handle