Activating Extract Structures in LBWE

Hi, I will be looking to activate my Inventory Controlling Extract Structures MC03BF0 and MC03UM0 with transaction LBWE.  I am doing this in my dev client 200.   I believe the system only allows me to activate the structures in client 200.  My data is located in client 220.    Once I activate the structure in 200 it prompts for a transport.  
Do I need to transport the activation to client 220 or should I just have authorization to activate the structures in 220 as I can in 200? 
Also, what would I do in production if I needed to deactivate and reactivate the structures?
Thanks for any help with this.

Hi,
I was having one such situation with Test system.there we were having 2 clients..we have to transport to two clients
it depends on how clients are configured. sometimes when you carry out development it should reflect in both the clients without transport. with next client you just have to load data..
check with basis how transport layer are configured ...
Thanks and regards

Similar Messages

  • Can I Add all the fields from POOL to EXTRACT Structure in LBWE

    Dear Experts,
    Our Client is asking to add all the fields in the POOL Table to EXTRACT STRUCTURE in LBWE that is he wants to add all the fields from Right Hand Side Table to Left Hand Side Table in the Maintenance of LBWE of all the SD Data Sources. For few fields there is no data even though they are saying that in the nearer future we are going to use all most all fields.
    Like wise they are asking to add all the tables like VBAP, VBUP, VBAK, VBKD, VBUK, etc.,
    My Questions are:
    1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
    2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
    Regards,
    Sai Phani

    Hi Sai,
    1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
    we can add all the fields from the POOL to Extract Structure, if really your business requires to pull all the data.
    2.2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
    Ofcourse, there will be performance matters, because we have to extract maximum number fields data to BI side. If we have data for all the fields in R/3, we may face performance problems like load takes long time.
    Hope this helps.
    Veerendra.

  • Error while enhancing the Extract structure in LBWE

    Hi All,
    When I am trying to change the extract structure os logistic extractors in LBWE, it is giving me an error saying "Entries for application 11 still exist in the extraction queue".
    Below is my scenario:
    I have 3 clients in the same R/3 system, Client 010, 020 and 030.
    Clients 020 and 030 are connected to my BW system. Client 010 will be used for all development while test loads can be done from clients either 020 or 030. Till now, I have tested my data flows only from client 030. Now, I have to add some extra field to the structure in LBWE but facing the above mentioned error.
    I went into LBWQ in both the client 020 and 030 and deleted the queue and then tried to change the extract structure in client 010 but still the same error.
    What else do I need to do to resolve this?
    Thanks,
    RPK.

    Hi Raki,
    We are still in development phase. I did all my developments(R/3) in client 010. Till now I did only full loads to BW from client 030 and haven't done any loads from client 020. My BW system is also connected to another sandbox client 100 but I haven't done any loads from that client aswell.
    As I have to add some extra fields to the extractor from LBWE, I did the follwing steps in R/3:
    1) I have deleted the setup tables from client 010, 020 and 030.
    2) Deleted the data from LBWQ from clients 010, 020 and 030.
    3) Trying to change the extract structure by clicking on "Maintenance" for the extractor in Client 010.
    At this point it is throwing an error.
    I thought that the client 100 might be a problem as I have transfer rules created in my BW system from this source system as well. As I do not need this source system anymore, I have deleted it from BW and tried changing the structure in LBWE but still the same problem.
    Any ideas would be highly appreciated.
    Thanks,
    RPK.

  • Error No. MCEX028 "You can not change the extraction structure" in LBWE

    Hi,
    I am getting this error when moving the fields from left to right...
    Thanking you in advance,
    Tarun Brijwani.

    Hi,
    Sorry for the wrong information..
    Actually the error is "Struct. from appl. 02 due to open V3 proc. not changed -> Long text"
    Data source name: 2lis_02_itm(unserialised v3 update)
    1.tcode LBWG and deleted the set up tables for application 02
    2..I went in rsa7(delta queue) but there are no entries in that queue...
            it is absolutely empty...
    2.I went in sm13 and put the client (all), user(all), and status radio button as 'all' and date as 01.01.2004 to current date,
    some entries were displayed but for all of them, in the status column is  "v2 processed" being displayed
    and some of them are using synchronous update adjacent to which STOP tatoo is displayed
    What do I do now..
    Thanking you,
    Tarun Brijwani.

  • No extraction structure active or no BW connected

    Hi All,
    While filling the setup Table in SBIW, we are getting Error
    <b>“No extraction structure active or no BW connected “.</b>  
    I have Activated extract structure in LBWE and also checked in ROOSOURCE table  and found the datasource is ACTIVE.
    Also, tried replicating and extracting Master Data, it works fine, it means that my connection is good. I can see this structure MC11VA0ITM  is Active in SE11.
    Getting same error message for all the datasources.  We are working on R/3- ECC 5
    And BW 3.5.
    Anticipating response at the earliest.
    Thanks
    Jashaik
    Points = Thanks

    Shaik
    Have you checked this thread
    "No extraction structure active or no BW connected"
    Hope this helps
    Thanks
    sat

  • Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

    Hi, Experts:
    I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
    In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
    I have done the following in client 200:
    - Activated datasources for for PM 2LIS_17_I3HDR in RSA5.  
    - Made selection in RSA6.
    - Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
    - I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
       No extraction structure for event I3: Messages active
       Message no. MCEX106
       Diagnosis
       You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
       System Response
       Data for event I3 is not transferred to the BW interface.
       Procedure
       First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
    - I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
    - I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
    Would anyone please help me with what to do to fix this?
    Thanks,
    Jenny
    Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

    Hi, thanks for the reply!
    Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
    Thanks,
    Jenny

  • Adding one more field in extract structure maintenance

    Hi Gurus,
    I have already extarcted data to BW using 2LIs_13_Vditm datasource and the deltas are also loaded.
    Initially when the extract structure(in LBWE) was maintained in LBWE, the field KTGRM-Acct.Assgnmt group was not selected from the POOL.Now there is a requirement to include that in the maintenance of extract structure.
    My question is, can i directly add the field to the datasource in R/3,without any coding in CMOD like in enhancements, and replicate again to BW without disturbing the existing data? OR Do I have to add the field in Trans.Stru, Update rules and cube and goahead loading data.
    Thanks in advance.
    Regards,
    Satya

    You can add any field listed in the pool of available fields directly to your LO datasource without enhancing the extract structure and coding in CMOD. But be aware to empty the delta queue and the extraction queue before, otherwise you can't change the extract structure.
    After replicating the changed datasource you have to update the relevant infoproviders, update rules and the infosource, because the new field was not known before.
    It is also recommended to reload the data from the source system in order to populate the new field for all data.

  • DataSources and extract structures generation

    Hi,
    How would I generate the DataSources and extract structures using transaction LBWE? It seems that there are no push buttons to say to generate the DataSources and extract structures from LBWE? Would clicking on the DataSources and extract structures and click on the continue button be enough?
    Thanks

    I check from LBWE maintenance structure column, and the fields are there on the left hand side for the selection criteria.
    How would I check "..<i>fields you have enhaced are ready to use</i>...." from LBWE.
    From RSA6, I would doubleclick on the LIS datasource, and I see no enhanced fields and therefore could not see if they are hidden.
    "<i>Did you check in LBWE if your strcutures have the fields ready to use?" </i>How would I do this? Maybe this is the problem.
    Thanks
    Message was edited by:
            NoNoNo ...

  • Extract structure is not active

    hello.
    try to activate datasource
    0RF_ARTHIER_ACT
    and got a error
    "Extract structure /BI0/ARF_DS0100 is not active"
    what have i do to activate this structure...
    its seems not like 2lis_03_bf, where 03 is number of application...
    help plz.
    thank you!

    Hi..
    In R/3 first transfer Business content application hier and come to RSA 5 and activate the data sources...
    Bw
    On source sysyetm replicate the data source ....proir to that you should have installed/activated that data source in Business content..
    Hope this helps...
    Ram

  • Extract structure /BIC/CE80CUSTOMERT is not active

    Hi,
    I have a datasource (080CUSTOMERT) in BI7.0  generated by 'Generate Export DataSource' for 0CUSTOMER Texts. When I tried to transport this into Quality system, I am getting the following error.
    Extract structure /BIC/CE80CUSTOMERT is not active
    The extract structure /BIC/CE80CUSTOMERT of the DataSource 80CUSTOMERT is invalid
    Has anyone faced similar issue and how to resolve this issue. Thanks in advance.
    -Ram

    u can try this.
    go to ur QA system and do a generate export datasource in the source sytem then replicate the datassource in the target system then try to transport the datasoure with infosource.
    chk this link also
    generate the export datasource

  • Extract structure not existing/not active

    Hello BWers,
    I have transported my Data Mart settings to the new BW prod environment (not yet in production). However I get an error message when importing saying:
    "The extract structure /BIC/CE8Z0PCA_C01 of the DataSource 8Z0PCA_C01 is invalid
    Message no. R8444
    Diagnosis
    An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view."
    I have checed and the structure doesn't exist. It automatically seems to have been added to dev package $TMP (local objects) and was therefor excluded from transport...
    Now, what I wonder, is how do I get this missing structure into my production system? I have the data sources, but the actual structure is missing...
    Best regards,
    Fredrik

    hi Fredrik,
    seems you post the same questions twice,
    as mentioned in your other thread, try 'generate export datasource' in your new production system.
    also take a look similar problem
    Export DataSource problem
    Trasport error while trasporting the Masterdata infosource
    hope this helps.

  • Append Structure to MCCOMP but not appear in Extract Structure (LBWE)

    Dear Experts,
    We are using the datasource 2LIS_04_P_COMP
    1) We append a field into MCCOMP and MCCOMPB, but that field doesn't appear in the pool of communication structure fields. Therefore, we cannot move from the pool (right side) to extract structure (left side)
    2) We need to add a field into MCCOMP, as we need to capture Delta for this field. Is there any user exit that can populate value for this structure?

    Hi,
    Follow the steps.
    1. Delete Setup tables in LBWG.
    2. Clear Q in SMQ1/LBWQ.
    3. Delete Q in RSA7.
    Then fine the ECC correct client for Customizing and there you can do the changes and activate it. If still it is not allowing and you want to add fields by using enhancements then goto SE11, and give MCCOMP and Append Structure and add fiels and write code in CMOD.
    Thanks
    Reddy

  • Problem in Add/Delete fields in Extract Structure.

    Hi All,
    When I want to delete some fields from the extract structure it gives me " " error.
    Steps:
    1. In R/3, T-Code LBWE -> Browse till DS ( ex: 2LIS_02_ITM)
    2. Inactive the DS by clicking on 'Active' under Update column
    3. Click on 'Maintenance' link under Structure column.
    4. Remove a field MCEKKO-KUNNR from left side to right side of the window.
    5. Click on continue button.
    It gives the below error while generating the extract structure.
    "MC03BF0" must be a flat structure. You can not use internal tables, strings,references, or structures as components.-
    Plz help how to handle this error ? The same error msg is displayed if I want to add few fields to the structure.
    Thanks in Adv

    refer steps here:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46

  • Structure maintenance not provided for Extraction structure MC02M_SCN

    Hi BW Experts,
        I am getting an error "Structure maintenance not provided for Extraction structure MC02M_SCN" while maintaining 2LIS_02_SCN datasource.I activated the datasource in RSA5 also.But i couldnt able to maintin this datasource.Can you please help me on this.
    Thanks in advance.
    Thanks,
    Ram.

    Hi,
    In LBWE for some of the DS Structure is not provided by the SAP.
    So For the mentioned DS "CGR" you can't see the structure from LBWE .
    Enhancement will be done based on extractstructure.
    Two ways 1. Through RSA6
                       2. TAKE THE EXTRACT STRUCTURE NAME OF " CGR" DS from RSA6 and append the fields in SE11.
                       3. Append the fields to the DS Extract strcuture " MC02M_0CGR" in se11
    Regards
    Ram.
    Edited by: Ramakanth Deepak Gandepalli on Dec 30, 2009 5:28 AM

  • Why do we de-activate the extract structure  in the LO extraction?

    Hi,
      plz let me know
    why do we de-activate the extract structure  in the LO extraction?
    what are preventive steps to be taken for duplicate records?
    Regards,
    Madhavi

    Hi,
    Why do you think that the deactivation is necessary step. Generally we donot activate the unrequired Extraction structures to avoid collecting of data in queues(in case of LO ). But we never deactivate the ES in any process intentionally. Ya, the ES turns into yellow(inactive) if we modify the ES in LBWE, but we make it active immediately as the part of process.
    With rgds,
    Anil Kumar Sharma .P

Maybe you are looking for