Activating Message Overview Message Monitoring
Hello,
We recently moved our XI system (3.0) towards SP21. Now we want to activate new way of message monitoring using the message overview. As stated in http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
note 1031773 describes how to activate the message status overview. However when i search for that note. The note is not (anymore) available.
An SAP note with the number requested could not be found.
Somebody a clue where the note has gone? Or can somebody tell me what are the steps to take to activate message-overview monitoring?
Thanks in advance,
Emile
Hi,
It is better to raise a new OSS. Sometimes, with a new solution or incorrect solution , some of the OSS notes actually gets cleaned up or deleted.
Regards
Krish
Similar Messages
-
Adding alert activity in OSB message flow urgent
hi,
i added an alert activity in my OSB proj message flow to monitor the process . after deploying the proj in console, i gave inputs. but i am not able to see the alert in operations>dashboard>pipeline alerts . no alert has been written in dashboard.
i have mentioned the alert destination, for alert logging option i have selected yes. can anyone pls hlep he in this issue.
thanksDid you enable Pipeline Alerts in the Operational Settings tab of the Proxy? If yes, also select the appropriate level based on the Alert level you had set within the message flow.
Also check the in the SB Console > Operations > Global Settings , that the Enable Pipeline Alerting is selected.
Thanks,
Patrick -
How to delete the messages in message monitoring
hi all,
can anyone tell me is there any way to delete the messages in message monitoring.Hi,
Please Refer these Blogs
/people/prasad.illapani/blog/2007/03/08/performance-tuning-checks-in-sap-exchange-infrastructure
/people/prasad.illapani/blog/2007/04/20/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-ii
/people/prasad.illapani/blog/2007/04/27/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-iii
<b>Reward Points if Helpful</b>
Regards
sasi -
Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help
Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards. -
How to use *MonitorManager* to add custom messages in channel monitoring?
Hi experts,
How to use MonitorManager to add custom messages in channel monitoring for custom adapter development(Not in audit log).
like
Type Time Stamp Message ID Explanation
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing completed successfully
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message with ID 00199942-6e43-02df-96ca-8b538c63dd98 processed
6/25/11 6:39:46 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing started
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing completed successfully
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message with ID 00199942-6e43-02ef-96b1-7650f3495e03 processed
6/24/11 6:43:24 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing started
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing completed successfully
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message with ID 00199942-6e43-02df-9698-5be345a9ddf5 processed
6/23/11 6:45:50 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing started
6/22/11 6:43:30 AM 00199942-6e43-02ef-95ff-2c03493dc078 Message processing completed successfully
Edited by: SAP_PI_D on Jun 28, 2011 12:10 PMSolve by myself
-
Cannot see adapter engine messages in message monitoring
hi guys,
i cannot see my adapter engine messages in message monitoring for my http to RFC syncronous scnenario.
i can however see the integration engine messages and can also see the receiver RFC channel in communication channel monitoringHi
this link ll help u in it -
Adapter Engine monitoring is provided in detail. Try as mentioned
http://help.sap.com/saphelp_nwpi71/helpdata/EN/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Regards -
Audit log missing in message in Message Monitor
Hi,
I am facing a weird problem.
I found this in one of my scenario where we are using AS2 adapter and its an IDoc to file scenario.
When I go to details of messages in message monitor in RWB,sometimes the Audit log is empty.
It is happening randomly and not specific to any scenario as later on I found the same problem in some messages from other scenarios too.
I have never faced this problem till now and it was working fine before.
Can anyone please let me know what could be the reason for this as this is difficult for me in case I need to analyse a message and there is no audit log.
Thanks in advance.
Regards,
ShwetaHi Rajesh,
Doesnt work for me :(((
404 Not Found
The requested resource /messagingsystem/monitor/monitor.jsp is not available
Details: File [messagingsystem/monitor/monitor.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Thanks.
Regards,
Shweta -
Message Services Message Monitor not opening in MII.
Hi All,
We have deployed MII 14.0/ME 6.1 on Netweaver 7.3.
In MII, Message Services > Message Monitor link not opening and we get the following error message.
Has any one faced this issue? whats the fix for this.
Detailed Error Information
Detailed Exception Chain
java.lang.NoSuchMethodError: com.sap.xmii.ejb.messages.MessageService.count([Ljava/lang/String;Ljava/lang/String;[Ljava/lang/Integer;Ljava/lang/String;Ljava/sql/Timestamp;Ljava/sql/Timestamp;[Ljava/lang/Integer;)J
at com.sap.xapps.xmii.ui.admin.messages.messagesmodel.SearchResultObservableList.getSize(SearchResultObservableList.java:52)
at com.sap.xapps.xmii.ui.admin.messages.messagesmodel.SearchResultObservableList.<init>(SearchResultObservableList.java:33)
at com.sap.xapps.xmii.ui.admin.messages.monitorcomp.MessagesComp.search(MessagesComp.java:395)
at com.sap.xapps.xmii.ui.admin.messages.monitorcomp.wdp.InternalMessagesComp.search(InternalMessagesComp.java:243)
at com.sap.xapps.xmii.ui.admin.messages.monitorcomp.MonitorView.onPlugIn(MonitorView.java:702)
at com.sap.xapps.xmii.ui.admin.messages.monitorcomp.wdp.InternalMonitorView.wdInvokeEventHandler(InternalMonitorView.java:429)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:142)
at com.sap.tc.webdynpro.progmodel.window.ViewController.invokeInboundPlugHandler(ViewController.java:446)
at com.sap.tc.webdynpro.clientserver.cal.NavigationManager.processInboundPlugQueue(NavigationManager.java:305)
at com.sap.tc.webdynpro.clientserver.cal.NavigationManager.navigate(NavigationManager.java:320)
at com.sap.tc.webdynpro.clientserver.phases.NavigationPhase.execute(NavigationPhase.java:63)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:515)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:58)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1671)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1485)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:908)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessing(ApplicationSession.java:880)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:357)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:326)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:89)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:373)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:499)
at com.sap.tc.webdynpro.serverimpl.wdc.ForwardServlet.doPost(ForwardServlet.java:73)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:276)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Any help would be highly appreciated.
Thanks,Hi Shridhar,
Check if XMII and MII_ADMIN are from the same SP. That might happen if they are from different SPs.
Best regards,
Krasi -
I am trying to write a message to the monitor from the start routine of my update rules. I am using the below code:
MONITOR-MSGID = 'RSM1'.
MONITOR-MSGTY = 'I'.
MONITOR-MSGNO = 799.
MONITOR-MSGV1 = 'Load Error: '.
MONITOR-MSGV2 = 'No Material for Specification: '.
MONITOR-MSGV3 = wa_dp-ehs_spec.
append MONITOR.
However, the only message that shows up in the monitor is "***** Scheduler". I do not get the error message text that I specify to show up in the monitor. Any ideas on what I am doing wrong?Hello Mark,
Depending on the BW version and the supportpackage level, an error can occur when the monitor functions are used. This is described in SAP Note 886222 Note 859813 - MSGNO is not displayed in monitor.
The monitor entries are filled with the custom messages in the start routine but the values in MSGNO and MSGV1 of the message are not passed to the monitor and are not displayed. This note corrects a problem that was introduced with note 859813.
If the BW system is on the support package level described below, the problem can occur.
BW release 3.0 B
Problem occurs in SP 28
Problem solved in SP 29
BW release 3.1C (content)
Problem occurs in SP 22
Problem solved in SP 23
BW release 3.5
Problem occurs in SP 14
Problem solved in SP 15
Hope this helps
Cerillo -
No active correlations for message
Hi,
I am working on a BPM scenario. I Receive 3 different messages which I merge later in the process. I can see that the first received message is processed but the following messages get stuck in the inbound queue with a error message "permanent error in BPM" or something like that. Also I saw an error message which says "No active correlations for message".
My BPM steps seem alright. I activated the correlation in the send step and used it in the receive step. Also defined it in the block as Local Correlation.
sxi_cache status is "0". no problem there.
Do you have any idea what the problem is?
By the way after i tried it a number of times the inbound error throw another error.
"Warning: EM-Memory exhausted: Workprocess gets PR
IV / Permanent error i"
Why do i get this error?
ThanksHi Arman,
First of all,
Run SWWL transaction in order to delete all the Work items involved with you Integration Process.
Then,
Check your correlation.
If you recieve 3 different messages and you dont know the order they came, the correlation should be
activated with the first message (first reciver step). But in the other two message you need to indicate which correlation must be used. I think you should use a fork with three receiver steps and in these
reciever steps you need to activate you correlation and use the correlation.
Hope this helps you.
Carlos -
"Error check activation" is the message I get when pulling a book from the library. My computer is authorized (per the ADE screen) I have tried un-authorrzing and re-authorizing but nothing works. Please help
I am having the same problem, and my computer is authorized through my Adobe ID and I cannot open any books. I tried downloading a book from the university library, using my ID, the book is in ACSM format, and I cannot open the book because it keeps telling me
"error check activation" I am including screen shots to show my computer is authorized. -
Dear All,
I am facing a very serious problem that in the message overview or SAP Attributes tab of any message posted are coming blank for me.
If the ticket is posted from satellite the values are filled but
if the ticket is posted within solution manager by any way......the values of these two tabs is blank.
Please helpHi Markus,
We had the same issue. And I had ping pong too.. Finally we resolved problem.
Solution for this is, when assigning ticket to SAP, as mentioned in the document, select "info to sap" and type some info there and assign to SAP by clicking "Actions" with "engine icon" and then ticket will be assigned to SAP, message will be transfered and you will get the message number etc in "SAP attributes".
If this is not the issue.. pls ignore..
Cheers,
Krishna -
My iPad won't send my Messages in "Messages" app
Pretty much what my title says, I've never been able to send messages on "Messages"
why? Thank youUnable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
iOS 7: Understanding call and message blocking
http://support.apple.com/kb/HT5845
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Internal Message Code: MESSAGE G:N
Hi,
We have upgraded from 4.7 to ECC 6.0. We are executing the Code Inspector transaction to correct the syntactical Errors occuring in Programs. When we try to execute this transaction for User exit, i am getting the following message. Please help.
ObjectType FUGS Object name XPRM Include ZXPRMU01 Row 7 Column 0
Syntax check warning
After a structure enhancement, the semantics of the assignment or comparison may
change.
Internal Message Code: MESSAGE G:N
Appreiciate your quick response.
Regards,
ShankarHi,
This error can arise if the enhancement category in the table use may be set as 'Can be Enhanced'.
Structure Enhancements
Possibilities offered by structure enhancements
Problems with structure enhancements
Classifying enhancements in the ABAP Dictionary
Handling the enhancement in the program check
1. Possibilities offered by structure enhancements
Customers can subsequently enhance structures and tables, defined by SAP in the ABAP Dictionary, as follows: Customizing Includes
Customizing Includes:
Specified parts of a structure or table are already reserved for enhancements. The customer then creates the appropriate includes.
Appends:
The customer appends fields to the end of the structure or the table without any prior reservation having been made.
Enhancements of this kind affect not only the structures and tables themselves but also all dependent structures that take the enhancement as an include or substructure. For example, if an enhancement using an Append takes effect only at the end of the initial structure, it will affect all the dependent structures.
2. Problems with structure enhancements
In programs without an active Unicode check, structure enhancements can cause significant problems with type checks or if used in connection with deep structures, leading both to syntax and runtime errors. In programs with an active Unicode check, assignments, operand checks, and accesses using offset and length are also affected and problems can arise For example, if a purely character-type structure is enhanced by inserting numeric or deep components, it can lose its character-type nature. Enhancements cause further problems because they can change the fragment view and hence affect the checks (based on the fragment view) for assignments and comparisons.
3. Classifying enhancements in the ABAP Dictionary
So that the effects of structure enhancements are visible, you can classify structures and tables in the Dictionary under Extras ® Enhancement Category as follows:
Level
Category
Description
1
Not classified
The structure has no enhancement category
2
Cannot be enhanced
The structure cannot be enhanced
3
Can be enhanced (character-type)
All structure components and their enhancements must be character-type
4
Can be enhanced (character-type or numeric-type)
The structure and its enhancement cannot contain deep data types
5
Can be enhanced in any way
The structure and its enhancement can contain components with any data type
Character-type includes elementary types C, D, N, and T; numeric includes the elementary types F, I, P, and X. The deep types STRING and XSTRING are not supported.
For structures and tables with includes or substructures, the enhancement categories of these includes and substructures cannot be lower than those of the initial structure. For example, if the initial structure contains a level 4 include, that initial structure cannot be a more restrictive level 2 or 3 structure.
Structure enhancements in the Dictionary can also affect internal structures in ABAP programs if Dictionary structures are used as an include or substructure in the source code. These dependencies are implicitly taken into account in the ABAP program check. This also includes non-classified structures containing includes or substructures that can be enhanced.
4. Enhancement handling in the program check
The ABAP program check uses the structure enhancement classification in the Dictionary to indicate all points in the source code that can lead to problems in connection with structure enhancements. The warnings are separated into three classes, depending on the effects of the permissible structure enhancements
Class
Type check
Description
A
Syntax check
Every enhancement using the enhancement categories causes a syntax error
B
Extended check
Permissible enhancements can cause a syntax error, but not in every case
C
Extended check
No syntax errors, but semantic problems because program behavior has changed
All structure enhancement checks are only effective in programs with an active Unicode check. Only static checks are carried out and no checks at runtime. The check also includes non-classified structures and tables, as long as the initial structure contains includes or substructures that can be enhanced.
Regards,
Renjith Michael. -
When I send a message on MESSAGES using my iPad2, they do not show up on my iPhone or my MacBook Mountain Lion messages. Did I miss a setting on any of the devices as I thought iCloud took care of syncing all of my devices
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
http://www.macobserver.com/tmo/article/messages_why_your_chats_dont_show_across_ cross-device/
Maybe you are looking for
-
Does anybody else get this. Burn a play list to cd, when the finished CD mounts itself at the end the finder shows one CD with the burn list name and still shows the blank cd which is not there as i have one drive. To get rid of them i have to eject
-
If my desktop email is open iCloud picks and chooses emails to delete before I even read them
my emails are disappearing and it's driving me nuts. i hear the bing that i have email but when i go to check and open it it'll automatically be deleted and i can't figure out why. this never happened on mobile me and seems to be a new thing because
-
X86_64 10gR2 install on RHEL4 ES x86_64 fails
After getting the nice new x86_64 10gR2 release, I excitedly unpacked it and ran the installer (after just installing 10gR1 the other day). Everything went along nicely until it failed in linking 'INFO: - Linking liborasdkbase'. Operator error? It se
-
Alerts and Phantom No.s
I am facing 3 issues in my current project. 1. Alerts are working fine as required. When i check the alerts in alert monitor, it's showing 243 alerts, when i try to download to a flat file, iam getting only 93 alerts. Even i try to cut and paste,
-
HI CAN ANYBODY EXPLAIN ME IN DETAIL WHAT IS SAP FI/CO MODULE?HOW SAP ABAPER HELPS SAP FI/CO? SHAMIT