Activating multiple licenses in one zone

I am brand new into PM 11 and was given the task of setting up one central Zone that will be proving PM for several individual School districts.
Does anyone know how I can activate the licenses from each school district into just one Zone?
Thanks in advance for your assistance.
Scott

Smurray,
contact Novell - [email protected] is a good start, then they can
merge your license entitlements into one.
Shaun Pond

Similar Messages

  • Activating multiple iPhones with one or many Apple IDs?

    I'm wondering whether its possible to activate an iPhone with an iTunes Store account that is not the one the phone will be used with. I'm centrally activating a dozen iPhones and loading a configuration profile onto them but I need to know if I'll need to take the staffs Apple ID's off them in order to do that?
    Equally they're all going to be on a company plan but I don't want them to be able to sync their phones and have access to the same account that was used to pay for the contract, otherwise they could go nuts on the company card! (I know there are some safeguards but it only takes one to read the password upside-down off the bosses desk and then...)
    Is it possible to complete an activation without logging into an iTunes Store account and if not then how do you avoid either:
    a) getting all the staff's personal information (and that is not something I would give out to anyone, they could post a silly question!)
    b) giving the staff access to a single company account. I don't even know whether its allowed to activate a dozen phones on one Apple ID
    I have an iPhone myself but I can't remember at what point I had to put in my information and the videos and tutorials I've seen either don't specify or are completely useless (the O2 one is my personal favourite http://shop.o2.co.uk/FAQ?category=iPhone&question=FAQHOW_DO_I_ACTIVATE_MYIPHONE given that you could re-write that whole page as just, "use iTunes")
    Also, am I missing something basic, I thought this would at least be in the Enterprise activation guide as I'm sure I can't be the first one to ask this question?
    Any help/thoughts appreciated

    Ah excellent, so I can activate the phones on the company account and hand them over to each member of staff to sync with their own iTunes accounts. So I'll also be able to get the free apps on the company account and then give them over to the staff to sync with their own iTunes accounts. It means I'll have to update them manually but that's manageable at this scale.
    Does anyone know if the ability to pre-load non-commercial apps is going to be a feature of the configuration utility at any point? Or at least have a post installation script which uses their account to download the apps (with appropriate dialogues requesting permission or whatever) so that you can ensure app deployment without knowing their Apple ID's?
    Must remember to delete that initial text message too, if there is still one, as that'll have the account login details!
    I've already got the iPhone Configuration Utility configured to set them up with Passcodes but I've not applied any restrictions, parental control wise. After all there's no point in having the iPhone if you can't have fun with all the features.
    A second question but related, if you take the iPhone backup file and save it on another machine (having swapped it out for one that may already have been there) and then plug the phone in, will it sync? Does it still work if the phone backup is encrypted?
    I'm thinking of backup solutions and the inevitable hardware failure that'll take the iPhone backup with it. I'll probably be trying to ChronoSync or RSync the User/Home/Library/Application Support/MobileSync/Backup folder to a server location where it'll be rolled into our regular backup procedure but will I be able to restore that backup to another machine, the .../MobileSync/ folder and get the iPhone to work again? How have others handled this?

  • Multiple licenses

    When purchseing multiple licenses from one company account do all usrs then require the password to the one company account in order to use and continue to use the cloud based applications.

    Adobe currently has a Team Ready offering for customers interested in a volume license for Creative Cloud. This is a TLP volume license to Master Collection CS6 and includes licensing for Lightroom and Muse. Customers with this will transition to Creative Cloud Team once available later in 2012. Team Ready only uses a single serial number and Adobe ID and is not the same as Creative Cloud Membership, like what is currently available for single subscribers. Team Ready is sold through Adobe authorized resellers. If this sounds like something you would be interested in, please contact a local Adobe Reseller for more information.
    This link has more info:
    http://www.adobe.com/products/creativesuite/companies.html
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativesuite/compa nies/pdfs/ccteam-ready-overview.pdf
    This link can help someone find a reseller in NA
    http://partners.adobe.com/resellerfinder/na/reseller.jsp?nav=all
    -Dave

  • Multiple FCPX licenses on one app store account

    Hi all,
    I am trying to figure out if it's possible to run multiple FCPX licenses on one appstore account.
    Searching the web gave me multiple options, but none of them really answered my question.
    It's only two licenses (for two machines) so we aren't capable of volume licensing since that's only availabe when running more than 20 machines.
    anyone an idea? would be great!
    Thanks in advance

    I'v got the same problem.
    According to FCPX license one licens can be usen on one computer in the same time.
    If You need to run in the same time more then one instance You need more license.
    I bought one and i need three more.
    Apple support in poland sending me to 'mac app store support form' on apple site... but this support sending me to Apple support in poland with this problem.
    As far, for Poland there is no edication licenses and we need (i'm working at university) to but the same number of FCPX licenses like the number of computer on which we want to use them during classes... but mac app store aplication don't have button which allows me tu buy anoyher licenses... it claim that i got one olready....
    If any one know how to buy another licenses on the same ID tell us.

  • ISE 1.2 Active Base License

    We are using ISE 1.2 for authentication on wireless and have noticed that base licenses are being consumed and show as an active endpoint for devices that attempt to connect to the SSID.  Is a license consumed for any type of radius authentication request, even if it is a failed request?  Does this mean that repeated requests to connect  to the wireless network assocaited with ISE will use an active license?
    There are currently no active enpoints at the moment yet I see 31 active base licenses used.

    The Cisco ISE license is counted as follows:
    •A Base or Advanced license is consumed based on the feature that is utilized.
    •An endpoint with multiple network connections can consume more than one license per MAC address. For example, a laptop connected to wired and also to wireless at the same time. Licenses for VPN connections are based on the IP address.
    •Licenses are counted against concurrent, active sessions. An active session is one for which a RADIUS Accounting Start is received but RADIUS Accounting Stop has not yet been received.
    Once you reach the license count/limit, you will start getting an alarm messages. license traps and alarms are just informational and not enforced. While the alarm is generated when the soft limit of endpoints is crossed and there is not functional impact on the users. To avoid service disruption, Cisco ISE continues to provide services to endpoints that exceed license entitlement. However there are plans to implement a hard limit on this soon.
    Regards,
    Jatin Katyal
    *Do rate helpful posts*

  • If I buy the single user version of the standard software, can I add multiple licenses later?

    We need to install in about 5 seperate computers in my office, and not sure exactly how to go about purchasing the software.
    Thanks.

    For multiple licenses, that is usually done through Adobe for a special multiple activation license. The price apparently is based on the number of installations that are expected. I am not sure of the exact process, but that is what I have heard over the years. So please contact the Adobe folks to see if you can get pricing information. Be sure to have an esitmate of the number of seats that you require. I would recommend the Pro version and not the Std version. However, that may be where you buy one Pro license and then a multiple license for Std.

  • Can there be multiple accounts on one id?

    can there be multiple accounts on one id?

    Unfortunately you can't do the logical and convenient thing of authorizing a computer with multiple Adobe IDs that are active simultaneously.
    You can authorize accounts from different vendors; one account per vendor.
    If you have multiple operating system users set up on the computer,  you can register different OS users as different Adobe Account users.

  • Advise on using DBMS_XA with multiple branches under one global transaction

    Dear all
    I need some advise on using DBMS_XA from PL/SQL with tightly coupled multiple branches under one global transaction. Basically, I've successfully written some PL/SQL code that in 3 different sessions attaches to 3 different branches of one global transaction and before ending each branch they can see each others uncommitted data. So far so good.
    However, I'm not sure I completely understand how each branch must call xa_end, xa_prepare and xa_commit correctly using two phase commit and my calls result in errors like:
    ORA-24767: transaction branch prepare returns read-only (XA error code 3 = Transaction was read-only and has been committed)
    ORA-24756: transaction does not exist (XA error code -4 = XID is not valid)
    ORA-02051: another session or branch in same transaction failed or finalized
    This is the structure of my programs (3 SQL*Plus sessions):
    main: Uses xid 123|0 (branch 0 of global transaction 123). This should be the coordinator that commits using two phase commit across the 3 branches
    m1.xa_start tmnoflags
    m2.DML
    m3.Wait for thread A + B to manually be started and run xa_end
    m4.xa_end tmsuccess
    m5.xa_prepare
    m6.xa_commit false
    thread A: Uses xid 123|A (branch A of global transaction 123)
    a1.xa_start tmnoflags
    a2.DML -- thread A can see main and thread B's data
    a3.xa_end tmsuccess
    a4.xa_prepare -- required?
    a5.Should we also call xa_commit false?
    thread B: Uses xid 123|B (branch B of global transaction 123)
    b1.xa_start tmnoflags
    b2.DML -- thread B can see main and thread A's data
    b3.xa_end tmsuccess
    b4.xa_prepare -- required?
    b5.Should we also call xa_commit false?
    The failing steps are:
    m5
    m6
    a4
    a5
    b4
    b5
    Before starting calling xa_end I see 3 rows in V$GLOBAL_TRANSACTION, eg (hex 7B = decimal 123):
    FORMATID GLOBALID BRANCHID BRANCHES REFCOUNT PREPARECOUNT STATE FLAGS COUPLING
    203348753 0000007B 00000000000000000000000000000000 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000A 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000B 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    Thanks a lot in advance.
    Cheers
    Finn

    OK, I've figured it out. This is poorly documented as it's not well explained how to handle the various return codes. Turns out that all but the last xa_prepare calls return dbms_xa.xa_rdonly (tightly coupled branches are combined -- "read only" optimization), the last one returns dbms_xa.xa_ok and this is when you should call xa_commit.
    Now my next problem is that DBMS_XA doesn't work from within jobs (DBMS_JOB and DBMS_SCHEDULER), which makes it very difficult to use DBMS_XA. My purpose of using DBMS_XA is to coordinate work across multiple sessions in one transaction but if I can't easily create the multiple sessions, I'm stuck.
    When called from a job, xa_start throws:
    ORA-24789: start not allowed in recursive call
    on Oracle 11.2. In Oracle 11.1 it works, but xa_end fails with
    ORA-25352: no current transaction
    so I guess in fact the xa_start call didn't really work either, even though it returned tm_ok.
    I'm now trying to find a workaround on how to use DBMS_XA from within jobs, please comment if you have any suggestions. Or if you have any suggestions on other means of establishing the concurrent sessions (I wouldn't like to resort to external programs that need username/password to connect as password management would be a security issue).
    Thanks in advance.
    Cheers
    Finn

  • Multiple ipads on one account

    I need to manage several iPads. Can I use one account for all in terms of downloading apps?

    Hi Guy3a,
    Legally, if different users are using your group of iPads you will need to use multiple Apple IDs to download apps, or sign up for Apple's Volume Purchase Plan (VPP). For multiple users like in schools or businesses you need to use VPP to purchase multiple licenses (can't share one Apple ID for 10 devices used by 10 students). http://www.apple.com/business/vpp/
    APP STORE PRODUCT USAGE RULES
    ( i )If you are an individual acting in your personal capacity, you may download and sync an App Store Product for personal, noncommercial use on any iOS Device you own or control.
    ( ii ) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license.
    If you are an educational institution or business you will want to enroll in Apple's Volume Purchase Program (VPP) which allows a single Apple ID to purchase multiple licenses of an app. Most developers will offer a 50% discount on their app when 20 or more VPP licenses are purchased in a single transaction.
    There is a free OS X program called Apple Configurator that you can use to distribute the VPP codes to your fleet of iPads. Apple Configurator uses a single Apple ID to install apps on your iPads. Configurator will also allow you to install free apps on multiple iPads using a single enterprise Apple ID. See http://help.apple.com/configurator/mac/1.0/ for details.
    Hope this answers your question!
    ~Joe

  • How to implement multiple queues in one circular buffer?

    Spoiler (Highlight to read)
    Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
    However, there is only one circular buffer allowed in one project for one data type.
    I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
    The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
    So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?   

    LawrenceChong wrote:
    Spoiler (Highlight to read)
    Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
    However, there is only one circular buffer allowed in one project for one data type.
    I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
    The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
    So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?   
    THe last time I wrote a multi-subscriber cirular buffer was in LV 6. Since then I have found that polymorphic queues perform much better so I now use multiple queues. One queue for each subscriber of the data. The subscribers are then responsible for maintaining their own histories.
    So just use multiple queues.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Can I authorize multiple accounts on one computer?

    Can I authorize multiple accounts on one computer?

    Unfortunately you can't do the logical and convenient thing of authorizing a computer with multiple Adobe IDs that are active simultaneously.
    You can authorize accounts from different vendors; one account per vendor.
    If you have multiple operating system users set up on the computer,  you can register different OS users as different Adobe Account users.

  • ITunes library synchronization across multiple users on one computer

    I've got a PC running MS XP/Home, with a separate user account for each family member. I also repointed all the iTunes library file pointers to the SAME file on the "D" hard drive (taking all that pressure off the "C" drive, which is filling up!)--so each iTunes incarnation for each user points to the same (master) file.
    But when I download music from the Music Store into the library from my user account, it doesn't show up in the iTunes library listing when my daughter logs in using her account--and she can't download it to her iPod.
    Why? I bought it for her; why should she have to download it? It's all on one computer!
    Is it that iTunes really can't handle multiple users on one computer??????? I don't get it...this isn't any copyright or license issue.
    I'd appreciate any tips to get the iTunes on one user's account to "restudy" the library to see if it's been changed by another user. We're all one family on our one computer!
    --DaveTh
    VAIO   Windows XP  
    VAIO   Windows XP  

    See this thread for answers: http://discussions.apple.com/message.jspa?messageID=1285867#1285867
    Post back here with questions if you have any.

  • How can I have multiple users on one apple id?

    How can I have multiple users on one apple ID?
    ie: I have my apple ID with my own credit, how can I set up credit for my son under the same apple ID, so that he can still access the same apps I've already downloaded and paid for?

    I've been trying to figure out a clean way to do this too. I think you may need more than one Apple ID – one that is shared and used to purchase "sharable" items and then "individual" Apple IDs for you and your son. That's the idea that I'm pursuing for the moment.
    It seems that there must be a way to do this, App Store purchases for the Mac are licensed across multiple machines. iPhone app purchases have "all your devices" licensing. Makes me think that Apple has a process in mind for sharing an account (or associating a device with multiple accounts).
    Other things I've learned:
    - Apparently you can't merge Apple ID accounts. I asked about this once at an Apple Store and was told that there was no way to do it.
    - If you share an Apple ID the Messages app behaves in a somewhat surprising manner. It must use your Apple ID to decide where messages should be sent because all users get all messages. This can make it very hard to organize a surprise party :-)

  • Can you have multiple users on one apple Id and utilize iCloud?

    My family shares an apple Id and we each have multiple Apple devices. When we use iCloud we "cross pollinate" each others devices with contacts, calendar events, etc.  is it possible to manage multiple users on one apple Id with iCloud activated or are separate ID's required?

    iCloud isn't designed as a multi-user service. Either you all have the same ID, and all your data is available to everyone, or you all have separate IDs and keep your data separate. You can share calendars, so that for example you could all have your own calendars but have one which is common to everyone:
    http://help.apple.com/icloud/#mm6b1a9479
    If you want to share contacts you will have to do it manually. If you want to do file transfer you will have to find a third-party alternative.

  • Can multiple PCs access one remote panel at the same time?

    I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
    "LabVIEW:  Serial port receive buffer overflow.
    LabVIEW:  The network connection was refused by the server."
    My question is: Can multiple PCs access one remote panel at the same time?
    Thanks in advance!
    Y

    Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

Maybe you are looking for