Activating ObjectKey's in change master with Release Key.

Hello Gurus,
I would like if SAP has come up with any solution for activating Object key for other objects apart from the standard BOM along with the release key.
Scenario:
I want my Engineering Record to create a change master with the Release key and use same the change master for making changes to Documents along with BOM. There is an OSS note 1767458 - WebUI: Object category enhancement for packages, release key for PLMWUI 746 and not for later versions of PLMWUI ( PLMUI 747).
Kindly advice.
Thanks & Regards
Jo

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

Change master with release key

Hello,
When change master is created with release key, changes to material master is not possible.
However changes to BOM are possible. If someone wants to make changes possible for material master with release key then how one can do that?
Thanks in advance,
jagruti

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Dear Friends,
We want to activate ECM for Material BOM as well as Master Recipe.
Scenario : ECR with Release Key.
We are able to activate for BOM only.
In object Screen, Master Recipe iline item is greyed out.
System : ECC 6.0 - Ehp4
Please guide.
With best Regards,
Raghu Sharma.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

About ECM's function with release key

hello,every expert.
Help me solve a problem.
current situation:
we use the tunction with release key in ECM,when we process the last step,release ECO,at first,set status ECOR,next,input release key 01,finally,save.
in this case,if don't input release key,still may save.
hope result:
after set status ECOR,if don't input release key,don't allow save.
how to achieve our hope result?
Best Regard.
YangTing PANG.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

Changing Master data table keys

Hello,
I have a custom extractor (built by someone else)on R/3 that gets data from table HRP1001. This extractor contains data I need to implement "job relationships" for HR in BW.
I am trying to extract the data into a master data object on BW. One job in the HRP1001 table (OBJID on R/3) can have multiple relationships (or object types, OTYPE on R/3). However, since the key of the master data for 0JOB is just JOB, OBJVERS, and DATETO (and does not include OTYPE), the load fails due to duplicate records.
Since to modify the master data table for 0JOB would be an SAP mod, I created my own "Z" object from 0JOB. I have been manipulating the /BIC/M, /BIC/P and BIC/Q tables to try to adjust the key to include at least the OTYPE. I can successfully change the key of the Z object's master data to appear as I want it, but the new objects I added as keys are "flagged" after the load fails due to duplicate records. (Checks of each /BIC table are okay and activated changes. Also performed SE14 adjustment of each table)
So my questions are 1) does anyone know of a business content item that for storing this type of data that I have missed? and 2) If not, can anyone recommend how I can correctly modify the key fields of a master data object?
Any assistance is greatly appreciated.
Thank you,
Kelley

Hello Kelley,
If you want to enhance the key of your master data table, include the infoobject in compounding. All the infoobjects included in compounding will be included in the key of master data table.
Hope it helps.
Regards,
Praveen

Bug? Can change swatches with arrow keys?

I use the Live Paint option and the Live Paint bucket often. It is really convenient to change the swatch I am using by using the left-right arrow keys to change my swatch chosen in the Swatch Palette. But in CS6, if I am doing so, and the next swatch chosen is a percentage tint of another color (for example, I have a swatch Blue, and a swatch Blue 85%, which is the Blue Swatch tinited to 85% in the color palette and then made into a saved swatch), the "select" box around the swatch disappears, and I can no longer change the swatch choice without re-clicking on it.
I can change easily between swatches that are not percentages of the original, with no problem. CS5 and all earlier versions that had this feature had no problem whatsoever.
Huh????

All swatches are CMYK creations by me, then I choose Global. So, I get swatches called things like, Skin Dark, Skin Med, Skin Light. Then, I want something a tint of one of these. So in the color Palette with a Swatch chosen, I slide tint to say 50%. Then I make a new swatch ("Skin Light 50%", global). Using the arrow keys, when I get to this new % swatch, it deselects, and I can't "scroll" through the swatches, as the "white outline" selection disappears and the swatch selection stays on this % swatch.

My workspace background changes color with every key stroke (black, gray, transparent)

In addition, when I use File>Place, the image comes in solid black until I accept the Free Transform. I am using Windows 8/PC.

Best guess is that there is an issue with your video card (most likely needs the driver updated). Go to Preferences > Performance and uncheck the "Use Graphics Processor" option in the lower right under Graphics Processor Settings. Relaunch Photoshop and see if you still run into the same issue.

Cannot quick change font with arrow key / mac

I have been using illustrator for years on windows and just recently switched to mac.
On the windows version of Illustrator CS5 you can preview different fonts on the desired text by just placing the cursor on the font selection bar and then simply press the up/down arrows keys. On mac it does not work that way.
Does anybody know how i can fix this?

I'm having the same issue on:
PC
Windows 7
Adobe Illustrator CS5
Also, at certain times I click in the font selection bar and type in the name of the font I want... or part of it and it shows up and when I hit the enter key it does not change the font but rather switches the selected font back to what it was originally on. Effectively doing nothing.

How to setup MM costing and drive for new parts before ECM release key is triggered?

Hi,
I am on the engineering side of SAP ERP where I create new materials, BOMs, etc. We do this with a change master without release key today. We are switching to a more controlled/managed process for engineering changes where we will use change masters with a release key and approval workflows for these tasks (ECM). The problem we are seeing is that the supply chain side of the business is not able to perform their tasks of costing materials and driving for new parts until the ECM workflows are complete, release key is active, and the changes are valid for production. There must be a way for supply chain to perform these tasks beforehand, so that when the release key becomes active, material costing is complete, new materials are already on hand (or at least been ordered), so that the process of procurement/production orders are not delayed. Can you point me to documentation that provides an overview, or summarizes what the best practices are for our supply chain when we start working with ECM release keys?
Thanks,
Joseph

the release key allows you to release the change for specific business functions. Please look at the options available in release key configuration. You will need multiple release keys to bring the changes in a more controlled manner.

How to Inactivate changes made by Change Master

Hi Guru's,
We use Change Master (no system status & release approach in use). If a BOM is changed with CM & data manager wants the change to be inactive (Planned Orders/ process orders should not copy the data of this CM), what could be the solution.
Thanks,
Kart.

Hi,
Create the CM with Release key so that with release key you can control. If you want to release the changes you can release at any time,but once released you con't revoke the same.
revert me if any issue
Regards,
Ravi

Change master CC01

Hi all,
we have created an alternaive BOM with a validiy date in the future & we have also created objects in the change master with tcode CC01. My problem is that the BOM and all planned orders lose their components on the date of the validation.
We suspect this problem occured after upgrading to ECC 6.0
Thanks in advance for your help
YAm

dear,
in CC01, Once you create a chnage master and create BOM using chnage number, then you need to release chnage number, then only it will be effective. In CC02, make the status as release, then it will work

Extracting changes from Change Master and importing to another BOM

Dear All,
Our client uses ECM and manages two BOM's the Engineering BOM and Production BOM.
The Engineering BOM s are changed through change number. We need to import these changes to the production BOM, (only the changes) through another change number
This means,
We have the Engineering BOM (No plant, usage 2) and Production BOM (Plant BOM with usage 1)with the same structure (BOM header is Z)
Header : Z
Position 1 :A Qty 1
Postion 2 : B Qty 1
Both initially had components A and B, each with Qty 1.
Now with a change number, the Engineering BOM is changed, a new component C is added, the quantity of A is revised to 2.
Now the Engineering BOM is
Header : Z, Plant ( blank) and Usgae 2
Position 1 :A Qty 2
Postion 2 : B Qty 1
Position 3 : C Oty 1
Our requirement is to extract the changes from the Change master, ie, the extract should say BOM header Z is changed,
New position 3 : C Qty 1,
Modified Position 1, Qty 2.
This should have only the changed information and we want to input this to the Production BOM, through another change number to change the Production BOM.
We want this process to be automated, in the sense, user enters the Production BOM header, Plant and usgae 1 and the new change number, then the BOM will be updated with the changes in the engineering BOM.
My Questions are
1- How to get an extract from the Change master with only the changes file, to a txt or xml or any format?
2- Apart from manually updating the Prodcution BOM by seeing the changes from Environment ->Reporting ->BOM changes of the Change master of the Engineering BOM, is there any other way to update the Production BOM only with the changes?
3- Ideally we want to import the changes to the Production BOM rather than deleting the items and again copying from Engineering BOM. What is best practice used in this scenario?
Any suggestions would be helpful
Regards,
Aby Thomas

Dear Mario,
Got ur point.. This is of course possible.. Practicallyboth the BOM's are not exactly identical. Tere is one more BOM apart from the Production BOM.
And there is a need to transfer the changes ( changes alone ) between BOM's.
Further more, there are interface from SAP to other systems, where they alos requires the BOM changes.. So the requirement arises, how to transfer the changes between BOM and also to other systems from SAP.,
If we do not have any interface from legacy PDM, how to extract the changes from the change master?
What is the general practise followed?
Regards,
Aby Thomas

ECO number with revision level and release key

Hi All,
I have a requirement from client with regards to Engineering change manangement.
The scenario is that we are maintaining BOM for materials.Whenever a change is required for BOM a ECO number is created with release key.
Once the BOM is changed against ECO number is created a workflow is triggered for approval.
Then it goes through a series of approvals in the heirarchy.In each level the reviewer will propose a new value for the changed line item.
All these changes have to be maintained in record.At the end the final approver reviews all the proposed changes and release the ECO number with the appropriate change.
I had a thought of implementing the above scenario with ECO with revision level and release key.
But I am unable to replicate the scenario due the fact that,when I select the ECO number with release key,I cannot select the material in Object type.
Its disabled.Its available when I create a ECR with release key.
Please suggest a way to create ECO number with release key and revision level for BOM.
Regards
Richie

Hi,
You create the revision level against the material (via MM02, basic data tab)) not against the serial. The serial number, by definition, would be unique to the combination of material and revision.
Regards

Release Key in ECM

Hi Gurus,
Can you tell me the importance of the Release key and Lock Change Number option given in the Set Up Control Data screen for the ECM.
Following Lock Change Number key options are there in SAP.
1) Global Release
2)Release for Costing
3)Release for Planning
4)Release for production.
Any detail document with ECM spro-configuration would have the full points in the basket.
Thanks,
Paddy

Hi Paddy,
In CC01 initial screen when choose "With Release key" option then no need to
attach an objects to the ECR/ECO, Tik/select only "Actv" "Object" MgtRec"
use the change number to change the object BOM/Routing, i.e. until you release the Change Number you don't see the change in Production order.
This is the relevancy of Release key in ECM.
When you lock the release key, i.e. you cannot make the changes affect in the production order or in OCM i.e order change management. So locking prevents you to make affect of changes in OCM.
similarly for costing, Planning & Global.
Regards
Rehman
Reward Points if Useful.

TS1424 At the time of activation I had given a master card. Now I want to change the visa card particulars to enable my purchases. How do I do it.

At the time of activation I had given a master card number. Now I want to change the visa card particulars to enable my purchases. How do I do it.

On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on your iPad then you could try tapping on your id in Settings > iTunes & App Store on and selecting 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918

Activating ObjectKey's in change master with Release Key.

Similar Messages

Maybe you are looking for