Activating ODS errors

Please tell me how to correct the error 'Invalid source system name ZBPS222 entered' and 'Error when creating the export DataSource and dependent Objects'
while activating ODS.

Dear Vaishali ,
Go to Infosources , in the Menu Bar you can find Settings --> Display Generated Objects --> Show all Generated Objects . Select this and refresh the Entire Screen for Infosources, Then press Cntrl + F , to search your Data mart 8(Techname of ODS ) .
Note : all this applies only if your Myself system is properly connected, So just Goto Source Systems and Check the Connection for your BW System which is indicated with as Myself Connection .
Thanks,
Krish
*Assigning points is way of saying Thanks in SDN
Hope it helps.
Thanks,
Krish.

Similar Messages

Errors when activating ODS

Hello,
i am trying to activate freshly installed ODS from business content.
it gives following errors:
RFC connection to source system BWDCLNT210 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Please suggest...
regards,

hi Aby,
try if right click source system BWDCLNT210 'restore'
check threads
RFC connection to source system Damaged
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
help.

ODS error

Hi all,
Iam getting error while activating ods.
error is - your client is not defined.
due to this ods is not activated.
but iam creating info cubes with the same client.
iam not getting any errors.
iam facing errors only when iam activating ods.
iam enable to understand the error.
so pleasehelp me in forward.
thanks in advance.

hi,
go to your source systemselect your source system(myself bw system). context menucheckif it's activated means no problemotherwiseright click it-select restoreit will ask restore and activatego with it--it will take some time to install. then check it out.
if your extracting from r/3 means check that particular source system and check it out.
if helpful provide points
regards
harikrishna N

Error while activating ods

Hi all,
i have the following errors turning up while activating ods.
1. creation of export data source failed
2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
3. error when activating ods object
Can anyone let me know how to rectify it.
regds
hari

Hi,
The problem is with ur Source Sys connection..
Above problems will be solved by restoring Source System Connection... Ask your Basis team to restore SS.
Thanks

Error While Activating ODS in BW

Hai Experts
While Activating the ODS the following errors are occurs
The creation of the export DataSource failed
RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
I am using IDES BW 3.1C.
Kindly suggest me a solution.
Balaji VK
09342501065
Error when activating ODS Object SALEODS

hi,
also take a look this
Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met

Error while Activating ODS data

Hi Experts,
I am getting following error while Activating ODS Request.
Job started
Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
Activation is running: Data target ZINV_MAT, from 7,883 to 7,883
Data to be activated successfully checked against archiving objects
SQL: 10/17/2005 21:04:17 lsingh
ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE
STATISTICS
SQL-END: 10/17/2005 21:04:17 00:00:00
SQL: 10/17/2005 21:04:17 GOELA
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 10/17/2005 21:04:17 00:00:00
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled
It's giving DBIF_RSQL_INVALID_RSQL error.
I am loading full upload to the ODS first time.
Any answer will be greatly appreciated.
Regards,
LS

hi LS,
yes contact basis is the right way
try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted.

Error while activating ODS Object (urgent)

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki.

Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.

Error coming while activating ODS

Hi,
While loading data in datasource there is a field item text in which a small box is coming due to which error is coming while activating ODS. When i check line item of datasource it shows me '#' instead of that box.
So i wrote a code in ECC to remove special characters. But still it is not deleting that small box and sending me error in ODS.
The data comes same in the table also with that small box.
Please tell me how to solve that problem as i cant do it manually as there are a lot of records. Do tell me how to remove it.
Roma

Hi Roma,
Actually all the invalid characters in the error message are displayed by small square box only. So you might not get which actual character it is.
Check the below given article for removing special character. In this article they have mentioned one standard FM to remove the characters which you can use in update rule or transformation for filtering invalid characters.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0cdc928-5e2d-2e10-e1bb-ec77bcb5cbfd?QuickLink=index&overridelayout=true]
Regards,
Durgesh.

Error ODS activation - sql error when accessing a table.

Hi,
sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
-RSMPC 128, datapacket 3 is wrong, with status number 9
-RSMPC 131
-RSDRO 108 - communcation error (sql error when accessing a table)
In sm21>
-sql error when accessing a table
-The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
either                                                      caught nor passed along using a RAISING clause, in the procedure <b>"UPDATE_ATAB"</b>   "(FORM)"
Since the caller of the procedure could not have expected this exception
   to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
I have BW 3.5.
Thank You very much.

There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource.   You seem to indicate that you don't have this.
Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
You could be loading from two different datasources to the ODS at the same time.
If any of these are true, I would look at bumping the INITRANS setting up. Your DBA will probably need to do this for table and its indices. There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered.
You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps.
Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
Pizzaman

Error in activating ODS--Most Urgent

Hi Experts,
I am facing error when activating ODS. THe load was succesfull and activation failed. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message
"Error when assigning SID: Action VAL_SID_CONVERT table 0WS_VALUE"
"Error getting SID for ODS object"
"Activation of data records from ODS object 0WS_O01 terminated "
"Value ' 4 5 6 7 8 9 ' (hex. '20002000090034002000200009002000200020000900350020') o "
And under others also it is showing same message.
Can any one please suggest how to solve this issue. Its very urgent.
Waiting for appropriate solution...

Hi,
The string you provided contains multiple TAB symbol (' 0900' ). They are not acceptable by ODS. You need to remove or replace them.
Here
Re: Removing the carriage return / Tab during data extraction
you can see some code examples on how to do it.
Though, as I can see your system is on UNICOD - you'll need to make some adjustment to the code you'll choose.
Best regards,
Eugene

Error activating ODS-Inconsistency DD - DB ?

Hi BW Gurus,
My requirement is to change the field length of one InfoObject used in ODS object(ODS_T) from Numeric 3 to Numeric 4. When doing the activation of ODS, the system prompt for continue with Activate and Adjust Database in SE14. However, some error occurred during adjusting the databse. After i corrected the error, i resume the adjustment of databse but still ended with error in Step 6. Therefore i delete the ODS Object(ODS_T) and recreate a new ODS using the same name.
When i try to activate the ODS, ODS Object couldn't be activated, below error returned:
The dictionary activation module could not activate all objects.
/BIC/AODS_T00: Inconsistency DD <-> DB (check table with analysis tool)
A table called /BIC/AODS_T00 exists in the database
No active nametab exists for /BIC/AODS_T00
Termination due to inconsistencies
Table /BIC/AODS_T00 (Statements could not be generated)
DDIC Object TABL /BIC/AODS_T00 hast not been activated
Error when activation ODS Object ODS_T
How can I correct this error? Please advice.
Thanks in advance.

Hi,
Try Tcode RSRV.
Run RSRV check on the DSO. If you found any error repair it.
RSRV is a diagnostic tool in BW, System will automatically corrects if there are any inconsistencies with the BW objects
It is used for Analysis and Repair purpose of BW objects like:
1. Master Data Consistency Checks
2. Transaction Data Consistency Checks
3. Size of Dimensio tables
4. Checking SID values
5. PSA duplicate record check
6. Checking Aggregates
7. Partitions of Info cuses etc...
You can check everything.
Just expand it > drag n drop the required test to the right panel and give the object > execute.
thanks,
JituK

Facing error when activating ODS

Hi All,
i am facing error when activating ODS. THe load was succesfull. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message
1.Activation of data records from ODS object ZOPA_8 terminated
2.Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
3.Error getting SID for ODS object ZOPA_8
"And under others also it is showing same message.
Can any one please suggest how to solve this issue. Its very urgent.
Waiting for appropriate solution...
thanks
kamal

Hi,
Check the following.
1. 0MATERIAL might be the reference char for ZOPA_8.
2. If so, then need to check conversion routines are same for both.
3. Then check the data (In PSA) under ZOPA_8 and check if it has any special chars or failing due to conversion routine.
4. Correct data and load it again.
Hope it works.
Regards,
Aditya

Error in Activation ODS - Version BIW 3.5

Dear
I have created infosource,info objects,application components & I have assigned data source & the Transfer & Communication structure was also established.
I Have created ODS in the Info provider & Saved. But when I am activating ODS Object, the following error messages are coming :
" STDO: Log could not be written on output device T" & " The creation of the export DataSource failed"
Kindly

Hi,
Usually Activation takes huge space. When you check the system when there is no activation in the system , you may feel that there is enough space. Check the note mentioned in:
Re: ODS Activation Error
With rgds,
Anil Kumar Sharma .P

ODS data Activation with error BRAIN060

Hi guys,
I have the next situation with the data activation in a ODS. The ODS have the extraction completed, but when I try to do the manual activation a error BRAIN 060 is caused:
1st.:
Error getting SID for ODS object ZPUR_OP
Message no. RSM1187
2d:
Value 'AYD CALPDS' (hex. '415944A043414C504453') of characteristic 0COORDER contains invalid characters
Message no. BRAIN060
Diagnosis
The following standard characters are valid in characteristic values as default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 415944A043414C504453).
3st:
Error when assigning SID (details in long text)
Message no. RSDRO303
System response
Request: REQU_4C4G67RXIW7C3PV88B1BMB4ZX
Data package: 000795
Data record: 12.153
InfoObject: 0COORDER
The error is the master data and the assigment SID; but the extraction did without PSA; only datatarget. With this I can´t modify the data erroneus.
Is possible force the activation or I can apply other correction that not be repeat the extraction?
Please,I need your quick collaboration.
Regards,
Jeysi

Hi Jeysi,
You can make the changes in ODS. If this request is not activated yet, in this case this data is available in your New Table of the ODS. You can make the changes in this data directly in this new Table.
After doing this changes it will allow to activate this request. Also you can find this New Table in object configuration.
Or
Go to Manage of ODS -> Go to Contents TAb-> In this Button at bottom with New Data. Please go through this and make the changes in New Data.
But prior doing this changes please check / analyse the reason correctly as per business requirement. Suggest them to take care of this in future to end users.
This will deffinately helps you.
Regards,
Mahesh

Activating ODS errors

Similar Messages

Maybe you are looking for