Activating project 2010 on windows 8.1

I bought a new computer with windows 8.1. I downloaded and installed MS project 2010. when I tried to activate the product it came back and said key had been used the set number of times. I got a new key but am unable to reenter it. How do I enter a new
key. I cannot find a way to do it. It keeps trying to activate with the bad key over and over again.
Thanks,
MASHAYINC

Hi,
Please try the following steps to enter a new key:
Go to Control Panel\Programs\Programs and Features\Project 2010\Right click\change\Enter a product key
https://support.microsoft.com/kb/2581695?wa=wsignin1.0
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Project Comparison with MS Project 2010

Hi to Everyone!
I'm working with MS Project 2010, and I'm trying to compare two different versions of the same project using the built in Compare Projects tool available in Menu -Project TAB -Reports.
The problem I have is, though I can finish the report the software only shows me the comparison table, doesn't show me the gantt chart; actually the gantt chart is empty and the timeline is automatically generated with the duration of 1 day.
I Don't know what to do solve this problem or maybe is a software bug.
I'll really appreciate if somebody can share any idea to solve this issue.
Thanks

Thanks for helping me.
In my case the comparison dates are shown in fields (TEXT 4, 5, 7, 8) and the Start/Finish fields 9 & 10 are empty, in each file. But they appears in the Comparison Report
In the comparison project Gantt chart it are not defined Task:Previous
and Task: Current.
At the end I added the definitions of the bars,
Task:Previous and Task: Current, to the Bar Stile Dialog box and everything appears
I don't know why I have this problem, maybe is because I'm using MS project 2010 in Windows XP Platform?
Thanks for your help, finally I can have graphically my comparison report!

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

MS Project 2010 Product Key Activation Error

Hello,
Our company purchased a version of MS Project 2010 a few years ago and it was installed on a laptop in our office and was working without any issues. However, that laptop recently had a virus issue and it needed to be completely cleaned off and rebuilt.
So now I am reinstalling all the software that was on that laptop. When I try to install the MS Project 2010 for that laptop it says that the Product Key is good and lets me install Project, but when I open Project it asks to Activate the version using
the Key online. When I say yes, it says that the Product cannot be activated because the Key is not valid.
Why won't it let me activate? It is the same version that was previously installed on the same laptop? Please let me know what I need to do to activate this software. Thank you.
- Sarah

smonville1,
I think this is an issue you'll have to resolve by contacting Microsoft directly. Have your key available when you talk to them.
John

Error saving Project 2010 files to network drive - doesn't see network drive

ANSWERED (11 April 2014):
So it seems the resolution to this is to simply create a new share with a different name. I used the existing folder (to retain NTFS permissions) and just select to Add a new Share (applying the same Share permissions as the non working Shares).
Deploying this new Share via Group Policy as a test resulted in staff being able to open files from Windows Search, save files through MS Project and the Share being accessible through browsing SMB.
All problems resolved by using a new share name for the existing folder. Seems to be a corruption in the namespace.
Note: I had previously deleted the share and recreated it. I had removed all NTFS permissions and readded (through both the GUI and icacls). This didn't make a difference.
Only changing the name of the share fixed the problem.
Original Question
Already
posted here... but Microsoft Support has not responded.
It seems some staff on some computers are having problems saving MS Project files to the network. This is only since an upgrade to SBS2011 (from SBS2003). The only difference now, is that network drives are mapped via group policy rather than a 'net
use' script.
This is affecting users on Windows 7 and Windows Server 2008 R2, with either MS Project 2007 or 2010. The users have full change access to the folders and can create new files and modifying existing files, just not a MS Project file. Other file tyes, e.g
Word .docx, Excel .xlsx, Adobe .pdf files, all work fine. These files can be opened, edited and saved normally without problem.
To replicate this:
The user opens an existing file or creates a new file on the network folder (either through Windows Explorer or MS Project). They then click File > Save in MS Project and receive the following error (see pic below):
An interesting symptom of this is that if you select File > Save As in MS Project, the Sae As dialog box doesn't remeber the path location of the network drive. MS Project instead prompts to save the file in the local users documents folder (see pic below):
If they browse back to the original folder where the file was saved and choose to save it there, they are of course, prompted to overwrite the existing file and they can save the file. But the same thing happens every time they open the file.
It seems the problem is that Project isn't seeing the path of the file or that the network drive is attached.
If a user closes the file without saving it, they are prompted to save the file and the prompt shows the drive path:
Do you want to save changes to "N:\... Projects\Active Projects\CC...\F4 Project Plan File\004 Programme\test project file.mpp"?
But choosing to save the file gives them the same result as Save As, they are prompted for a new location as if the original file location doesn't exist.
I have disconnected the mapped drive and connected it again using net use but get the same error.
I have reinstalled MS Project 201, installed Project 2010 SP2 and installed Windows updates and it does the same thing, exactly the same symptoms.
Further, if the user opens a file from the network drive, the file shows in the Project recent files list. If they try to open the file from the recent files list in project they get the following error:
"Project cannot open the file.
-Check that the file name and path are correct.
-Check that the file format is recognized by Project.
Project files saved in a version earlier than Microsoft Project 98 can't be opened...."
This is a test file that I created on the user's computer and network drive, This is being opened with the same version it was created in. If I browse to the folder in Windows Explorer I can open the file. Of course, I then can't save the file (I still get
the original error). I'm logged on with Domain Admin privileges.
I've checked these links from other threads (neither apply to my scenario):
http://support.microsoft.com/kb/983458/en-us|
http://social.technet.microsoft.com/Forums/en-US/excel/thread/2eeea140-7e6c-4cb9-a89b-06d2102bd9f7/
I've downloaded my TechNet version of he software and installed it with Sp2 and Windows updates and it does the same thing. This also happens on the Remote Desktop server (Server 2008 R2) using MS Project 2007.

Case 1
This error message appears when the document is open on two or more computers that are running different operating platforms. For example,
if the document is open on a Macintosh computer and you open it on a second computer running Windows or Windows NT, the error occurs when either user tries to save the document.
This problem stems from a difference between the ways Macintosh OLE and Windows OLE open files. As a result, you cannot save a file on two different operating platforms at the same time.
Case 2
This error occurs in Word 97 for Windows if you save to a MAPROOT type network drive connection on a NetWare server where spaces exist in
the file or folder name.
Case 3
This problem may occur if an anti-virus program running on a network has the ability to scan for macro viruses in documents in shared network
folders.
For example, if you have the following:
a shared folder on a network server
-and-
an anti-virus program is running on the network server that is set to monitor the shared folder,
when you attempt to save a document (across the network) to the shared folder, the anti-virus checker may cause the error to occur.
Case 4
This problem may occur on Novell networks when the AutoRecover files path is either blank or set to a network drive.
According each, please try the following workaround:
WORKAROUND
To work around this problem, use one of the following methods appropriate to your situation.
Case 1
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Save a copy of the
file with a different
file name, and work on the copy, either on your hard disk or on the server.
Case 3
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Do not use spaces in the directory or document names.
Method 3:
Do not use MAPROOT-drive connections. Map your drive connections to the volume-level only.
Case 4
Turn off the anti-virus protection on the network server and then try to
save the document. Contact your anti-virus protection software company for additional details and/or updates to their programs.
Case 5
Set the AutoRecover files path to your local drive. To change the AutoRecover path, use the following steps:
1.
On the Tools menu, click Options.
2.
On the File Locations tab, select AutoRecover files and then click Modify.
3.
Change the Modify Location dialog box to a
folder on your local drive and then click OK.
4.
Click OK to close the Options dialog box.
Hope that helps.
Smith

Creation of a Multi-Year Product Roadmap in Project 2010

I am looking to see if I can efficiently create a product roadmap using Project 2010. For a given business unit in our corporation I have product categories and under those categories I have products and/or projects I want to show on a timeline. I
was able to brute force this into a timeline but I would think there is an easier way to do this.
For example, I would like to be able to put the description of the product/project inside the bar on the ghantt chart but I get an error when I try to do that. I increased the bar height to allow for legible text but still no luck.
I want each entry for a given product category to automatically produce a bar of the right color with starting and ending symbols as needed based on the type of entry I add (product versus project).
Is there any way to add an outline to the bars of different colors to designate the difference between a sustaining, anticipated, active, and discontinued product or project?
Or would I be better served to go find an aftermarket piece of software that will do this type of work instead of trying to use MS Project for something it wasn't specifically designed?
Thank you for any feedback.
Andy

Hi Andy,
Here is a
tutorial that might help you coloring your bar style. This is based on the resource name but you could have a custom field with your product category which trigger a flag then the bar style will be formated
based on the flag.
Then about the description in the bar, I'm afraid this is not intended for this purpose. What about the note fields?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

MS Project 2010 with Outlook 2013 - "send as attachment" missing function / not working

Office 2013 Professional running on Windows 7 (64bit).
After Re-installing MS Project 2010 today the option under
File (alt-f) --> 'Save & Send' --> 'Send as Attachment' is shaded out / unavailable.
Is this a known integration gap between the older MS Project and Current Outlook ? Alternatively, does anyone have any recommendations to troubleshoot and / or enable the function within MS Project 2010?
Thanks for any suggestions , guidance or pointers.
p.s I have tried completing a repair on Office 2013 and the MS Project 2010 from within the control panel.
This functionality is working with all other Office 2013 applications in the suite (Excel, PowerPoint, Word, Visio etc.)

Julie ,
Kinda / sorta ... In Mid 2014 I had MS Project installed and working (I can't confirm if the Send as Attachment was working at that time...) A few days ago I was sent an '.mpp' (MS Project file) for review. When I attempted to open it MS Project
gave me a warning message that it needed to start in safe mode but then failed to start. This seemed weird and thus began two days of googling and investigation.
I elected to uninstall (which also failed) and reinstall (which also failed) the MS Project 2010 since I have the media at hand to do so. At this point I was really truly 'stuck' (p.c term for the younger audience reading this).
My course of action was to engage Microsoft Support (specifically the MS Office group). They verified some registry entries, confirmed installation of MS Project 2010 , confirmed files were installed , available and in the appropriate
spots (files etc.) , tried a few 'fixit' tools , made multiple suggestions that I spend $1000+ on upgrading to MS Project 2013. After ~90 minutes or so they were able to 'Force' the orphaned installation to uninstall. (although
they needed to install and use a 3rd party tool to do it) We then re-installed MS Project 2010 and verified it could start.
After using project a little bit I realized that 'Send as Attachment' option was non-functional. I spent a few hours trying to research (more google) and finally threw in the towel and cried out for help (i.e posted the message that started this
thread).
Thanks again for any suggestions or wisdom you are willing to share.

SCCM 2012 - Project 2010 Standard deployment failed with error 1603

Hi everyone,
I’m in the progress to roll out a software deployment via SCCM 2012, it’s to remove the current Project 2010 Professional we installed and reinstall the Standard version. We got a task sequence for the job, which is Reboot>Un-install Project 2010 Pro>Reboot>Install
Project 2010 Std.
The Un-installation process uses this command: setup.exe /uninstall PrjPro /config "PrjPro.WW\uninstall.xml"
The Installation process uses this command: setup.exe /adminfile project_silent_install.MSP
But the deployment result is quite random, some of the PCs would succeed without any issue, some of them with fail at the installation process with 1708/1603 error. As far as I know we use standard Win 7 64bits SOE across the environment, so everyone should
have same system baseline.
I reviewed some of the failed Project 2010 Standard installation logs as it shows the following:
Executing chained package: PrjStdWW
05/09/2014 20:16:14 Installing chained package: PrjStdWW
PERF: TickCount=530512 Name=Verify MSI local install source Description=Begin function
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
LIS: wait for package "{90140000-003A-0000-0000-0000000FF1CE}" to complete caching
LIS: package "{90140000-003A-0000-0000-0000000FF1CE}" caching completed
PERF: TickCount=530528 Name=Completed verify local install source Description=End function
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Use Shell UI transform : LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
Current transform is at path: LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
Using transform at path: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST
Catalyst Package Install...
Package: PrjStdWW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
Command Line: PATCH="\\SCCM2012\SMSPKGE$\PC100139\project_silent_install.MSP" ADDLOCAL=C.35347883.0E64.45B4.88A0.1881DE05E259,OSpp_Core,Project_PIA,SetupExeArpEntry,Office10Fix1,ProductFiles,InternationalSupportFiles_JPN,AceFiles,IMNFiles,OfficeIntlRDC,AceOdbc,OArt_DocTheme,OSetupController,WISPFiles,TCDRegistration,SetLanguageFiles,TCWorks7Files,ClviewFiles,VBAFiles,OfficeAppSupport,TextConverters,ProductNonBootFiles,dummy_Office_PIA,CAGOffice10,VSCommonPIAHidden,WebDiscussFiles,CAGCat10,CAGCat10Clips,MsoInstalledPackagesScoped,WxpFiles,SetupControllerFiles,Forms_PIA,dummy_MSCOMCTL_PIA,AlwaysInstalled,Gimme_OnDemandData,AceRepl,OISFiles,OfficeOLESupport,OfficeMSProof6,CAGFiles,InternationalSupportFiles_ArialUni,OSpp,Ace_PIA,GraphicsFiltersFile,WebDriveFiles,PROJECTFiles,ProductFiles_B2TR,SetupXmlFiles,OfficePostBoot,DocumentImagingUtils,VSTOCLR35,CAGCategoryFiles,ProjectCommon,VSTO,ProofingParent,MsoCommonShellHandler,OfficeDigitalSFiles,CARegistryFeature,OfficeCoreRDC,SetupExeAddRegistry,NonC2R_ProductFiles,MSSOAP3,TranslationCore,CAGOffice10Clips REMOVE=WISPHidden ARPENTRY_NOMODIFY="#0" ARPENTRY_MODIFYPATH="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /modify PRJSTD /dll OSETUP.DLL" INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SLD_OEMPIDKEY="0" ARPENTRY_NOELEVATEONMODIFY="#0" SETUP_REBOOT="never" COMPANYNAME=" " ARPENTRY_SKUCOMPONENTS="[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Proofing.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Project.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office64.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\PRJSTD\setup.xml[~]" ARPENTRY_HELPLINK="" ARPENTRY_DISPLAYICON="C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\OSETUP.DLL,1" ARPENTRY_DISPLAYNAME="Microsoft Project Standard 2010" ACCEPTEDEULA="1" ARPENTRY_DISPLAYVERSION="14.0.4763.1000" BRANDING_XML="C:\Windows\TEMP\Setup00001048\BRANDING.XML" SLD_SUPPORTSBYPASS="0" SLD_ACID="5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE" SLD_TRIALTYPE="0" ARPENTRY_PACKAGEREFS="[~]OfficeMUISet.en-us[~]OfficeMUI.en-us[~]Proofing.en-us[~]Proof.en-us[~]Proof.es-es[~]Office64MUISet.en-us[~]PrjStdWW[~]Office64WW[~]Office64MUI.en-us[~]ProjectMUI.en-us[~]Proof.fr-fr[~]" SLD_DPID="#xF804000004000000380032003500300033002D00300030003000390038002D003000300031002D003000300030003000310030002D00300033002D0031003000330033002D0037003600300031002E0030003000300030002D0031003200390032003000310034000000000000000000000000000000000000000000000000000000000000000000350064006300370062006600360031002D0035006500630039002D0034003900390036002D0039006300630062002D00640066003800300036006100320064003000650066006500000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000500072006F006A0065006300740053007400640056004C00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000A09E4657B64703B2F32E339838F004006FE4EEC0394DE6AB2D77DCABCBC8F1C3B8B617EF54ACB52805F38EE560D0B738230977F4AB92430B37CBF02B49DB7636DCF15CE7E175CCF354E009C7A02432315800310036002D0030003800300035003100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000056006F006C0075006D0065003A00470056004C004B00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000006C0074004B004D00530000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" REMOVESAMEVERSION="" SLD_LICENSETYPE="6" SETUPEXEINSTALLUICULTURE="en-US" ARPENTRY_SHELLUITRANSFORMLANGUAGE="en-US" USERNAME=" " ARPENTRY_CONTACT="" ARPENTRY_HELPTELEPHONE="" ARPENTRY_PRODUCTCODES="[~]{90140000-00B4-0409-0000-0000000FF1CE}[~]{90140000-002C-0409-0000-0000000FF1CE}[~]{90140000-003A-0000-0000-0000000FF1CE}[~]{90140000-002A-0000-1000-0000000FF1CE}[~]{90140000-001F-0C0A-0000-0000000FF1CE}[~]{90140000-001F-0409-0000-0000000FF1CE}[~]{90140000-001F-040C-0000-0000000FF1CE}[~]{90140000-0115-0409-0000-0000000FF1CE}[~]{90140000-006E-0409-0000-0000000FF1CE}[~]{90140000-002A-0409-1000-0000000FF1CE}[~]{90140000-0116-0409-1000-0000000FF1CE}[~]" ARPENTRY_INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SETUPEXE_DOARPWRITE="1" ACIDS="11B39439-6B93-4642-9570-F2EB81BE2238;5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE;B6E9FAE1-1A0E-4C61-99D0-4AF068915378" ARPENTRY_SPPSKUID="[~]5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE[~]" ARPENTRY_NOREMOVE="#0" SLD_PKU="0" SLD_PID="82503-001-0000106-49615" LICTYPE="ltKMS" ARPENTRY_UNINSTALLSTRING="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /uninstall PRJSTD /dll OSETUP.DLL" ARPENTRY_NOREPAIR="#1" ARPENTRY_URLUPDATEINFO="" ARPENTRY_URLINFOABOUT="" REMOVEPREVIOUS="" ARPENTRY_CACHELOCATION="C:\MSOCache\All Users" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\" ARPSYSTEMCOMPONENT=1 TRANSFORMS="C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST" ALLUSERS="1"
PERF: TickCount=530543 Name=MsiPackage::Install Description=Calling OMsiInstaller::InstallProduct for package file "C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Error: Failed to install product: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi ErrorCode: 1603(0x643).
Log level changed from: Standard to: Verbose
Rolling back chain
05/09/2014 20:18:47 Rolling back package: PrjStdWW
There appears to be no rollback work to do for package: PrjStdWW path: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
05/09/2014 20:18:47 Rolling back package: Office64WW
Package Office64WW was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64WW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\Office64WW.msi
Command Line: ADDLOCAL=AcePiaReg64,VSTO64,WordXmlEditVerb64,ExcelXmlEditVerb64,GrooveShellIntegration64,Project64Files,OSpp64_Core,ExcelPiaReg64,GraphPiaReg64,FormsPiaReg64,SmartTagPiaReg64,PPTXmlEditVerb64,MsoInstalledPackagesScoped,OfficeExample64bitFilesA,WAC_XmlEditVerb64SPD,SetupXmlFiles,WordPiaReg64,Outlook64Files,AlwaysInstalled64,VBEPiaReg64,VisioPiaReg64,Outlook64SearchShellReg,OneNote64Files,SetupControllerFiles,ProjectPiaReg64,SearchFilters64Files,OutlookPiaReg64,Gimme_OnDemandData,Visio64ShapeSearch,WAC_PIARegSPD64,ProductNonBootFiles64,XDocsPiaReg64,PublisherPiaReg64,OneNotePIAReg64,ProductFiles64,OfficeExample64bitFilesB,OfficePiaReg64,Visio64Files,TCDRegistration64,OSpp64,XDOCSFiles64,XDocsXmlEditVerb64,MsoCommonShellHandler64bit,AccessPiaReg64,PowerPointPiaReg64 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64WW ProductCode:{90140000-002A-0000-1000-0000000FF1CE}
05/09/2014 20:18:56 Rolling back package: ProjectMUI.en-us
Package ProjectMUI.en-us was installed in the chain... uninstalling as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Install Rollback (uninstall)...
Package: ProjectMUI.en-us
Product Code: {90140000-00B4-0409-0000-0000000FF1CE}
Command Line: REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back install of package: ProjectMUI.en-us path:C:\MSOCache\All Users\{90140000-00B4-0409-0000-0000000FF1CE}-C\ProjectMUI.msi
05/09/2014 20:19:00 Rolling back package: Proofing.en-us
Package Proofing.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proofing.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proofing.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proofing.en-us ProductCode:{90140000-002C-0409-0000-0000000FF1CE}
05/09/2014 20:19:04 Rolling back package: Proof.en-us
Package Proof.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.en\Proof.msi
Command Line: ADDLOCAL=FindAllWordFormsFiles_1033,Gimme_OnDemandData,SpellingAndGrammarFiles_1033,ThesaurusFiles_1033,MsoInstalledPackagesScopedIntl_1033,HyphenationFiles_1033,OCR_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.en-us ProductCode:{90140000-001F-0409-0000-0000000FF1CE}
05/09/2014 20:19:05 Rolling back package: Proof.fr-fr
Package Proof.fr-fr was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.fr-fr
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.fr\Proof.msi
Command Line: ADDLOCAL=MsoInstalledPackagesScopedIntl_1036,Gimme_OnDemandData,SpellingAndGrammarFiles_1036,SetupControllerFiles,FindAllWordFormsFiles_1036,TranslationFiles_1036,ThesaurusFiles_1036,HyphenationFiles_1036,SetupXmlFiles,OCR_1036 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.fr-fr ProductCode:{90140000-001F-040C-0000-0000000FF1CE}
05/09/2014 20:19:11 Rolling back package: Proof.es-es
Package Proof.es-es was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.es-es
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.es\Proof.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SpellingAndGrammarFiles_3082,OCR_3082,FindAllWordFormsFiles_3082,HyphenationFiles_3082,ThesaurusFiles_3082,MsoInstalledPackagesScopedIntl_3082,SetupControllerFiles,SetupXmlFiles,TranslationFiles_3082 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.es-es ProductCode:{90140000-001F-0C0A-0000-0000000FF1CE}
05/09/2014 20:19:12 Rolling back package: Office64MUISet.en-us
Package Office64MUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUISet.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUISet.en-us ProductCode:{90140000-0116-0409-1000-0000000FF1CE}
05/09/2014 20:19:19 Rolling back package: Office64MUI.en-us
Package Office64MUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUI.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUI.msi
Command Line: ADDLOCAL=OfficeExample64bitFilesBIntl_1033,OfficeExample64bitFilesAIntl_1033,Gimme_OnDemandData,Outlook64SearchShellRegIntl_1033,ProductFilesIntl64_1033,MsoInstalledPackagesScopedIntl_1033,OneNoteToLinkedNotesIEAddin64Intl_1033,GrooveFiles64Intl_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUI.en-us ProductCode:{90140000-002A-0409-1000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUISet.en-us
Package OfficeMUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUISet.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUISet.en-us ProductCode:{90140000-0115-0409-0000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUI.en-us
Package OfficeMUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUI.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUI.msi
Command Line: ADDLOCAL=MetricConverterIntl_1033,AlwaysInstalledIntl_1033,MSTagPluginStockFilesIntl_1033,WebDiscussFilesIntl_1033,GraphicsFiltersPNGFilesIntl_1033,EquationEditorFilesIntl_1033,GraphicsFiltersEPSFilesIntl_1033,MSTagPluginNamesFilesIntl_1033,TCWP5FilesIntl_1033,CAGOffice10Intl_1033,OISFilesIntl_1033,WxpFilesIntl_1033,XDOCSEditorFilesIntl_1033,CAGFilesIntl_1033,WISPHiddenIntl_1033,CAGCat10Intl_1033,SetLanguageFilesIntl_1033,OSetupControllerIntl_1033,MsoInstalledPackagesScopedIntl_1033,TCRecoverFilesIntl_1033,SetupControllerFiles,ClviewFilesIntl_1033,GraphHelpFilesIntl_1033,ProductNonBootFilesIntl_1033,MSTagPluginPlacesFiles_1033,VisioPreviewerIntl_1033,ProductFilesIntl_1033,AceReplIntl_1033,GraphicsFiltersCGMFilesIntl_1033,GraphicsFiltersWPGFilesIntl_1033,Gimme_OnDemandData,TCWP6FilesIntl_1033,GraphicsFiltersGIFFilesIntl_1033,GRAPHFilesIntl_1033,MSTagPluginDateFilesIntl_1033,WebDriveFilesIntl_1033,LOBiFilesIntl_1033,LISTFilesIntl_1033,UICaptionsCompanionIntl_1033,SetupXmlFiles,AceFilesIntl_1033,TOOLSFilesIntl_1033,MSSOAP3Intl_1033,VBAHelpFilesIntl_1033,GraphicsFiltersPICTFilesIntl_1033,OfficeDigitalSFilesIntl_1033,VBAFilesIntl_1033,GraphicsFiltersJPEGFilesIntl_1033,QueryFilesIntl_1033,SetLanguageHelpFilesIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUI.en-us ProductCode:{90140000-006E-0409-0000-0000000FF1CE}
Error attaching to OSE, error 0x00000000
Stopping running ose
LIS: start uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
Error attaching to OSE, error 0x00000000
Stopping running ose
SystemRestore : Attempting to cancelling System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
SystemRestore : Successfully cancelled System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
Not showing completion dialog because it was not requested.
Catalyst execution finished: 05/09/2014 20:19:25. Return code: 1603.
PERF: TickCount=722128 Name=RunSetup Description=End function
Can onyone enlighten me what's went wrong, and why did I get this inconsitent installation behaviour?
Thank you very much!!!

1603 means there is a fatal error during installation process.
Take a look at the article below. It may help on finding cause.
Hi Juke,
I did do fair a bit of Googling before I started the post. I have increased the logging level on one of the machines failed on the installation. Apparently Project installation log doesn't throw the "return value 3", I think it's pointing to a particular
updating item, anyone knows what is it?
Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed.
The following is the detailed installation log.
MSI (s) (8C:B4) [20:31:33:122]: Executing op: SetTargetFolder()
MSI (s) (8C:B4) [20:31:33:122]: Executing op: FontRegister(Title=Arial Unicode MS (TrueType),File=ARIALUNI.TTF)
MSI (s) (8C:B4) [20:31:33:122]: SHELL32::SHGetFolderPath returned: C:\WINDOWS\Fonts
MSI (s) (8C:B4) [20:31:33:122]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)
MSI (s) (8C:B4) [20:31:33:122]: Error in rollback skipped. Return: 5
MSI (s) (8C:B4) [20:31:33:746]: Entering MsiProvideAssembly. AssemblyName: Policy.12.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:746]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:777]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:777]: Entering MsiProvideAssembly. AssemblyName: Policy.11.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:777]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:808]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:808]: Entering MsiProvideAssembly. AssemblyName: Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:808]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:840]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:840]: Note: 1: 2318 2:
MSI (s) (8C:B4) [20:31:33:840]: No System Restore sequence number for this installation.
MSI (s) (8C:B4) [20:31:33:840]: Unlocking Server
MSI (s) (8C:B4) [20:31:33:980]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Note: 1: 2262 2: InstallExecuteSequence 3: -2147287038
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed. Error code 1603. Additional information is available in the log file C:\WINDOWS\TEMP\MSI1f79e.LOG.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed an update. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Update Name: {35347883-0E64-45B4-88A0-1881DE05E259}. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Note: 1: 1708
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 -- Installation operation failed.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed the product. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: MainEngineThread is returning 1603
MSI (s) (8C:24) [20:31:34:011]: No System Restore sequence number for this installation.
MSI (s) (8C:24) [20:31:34:011]: User policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:24) [20:31:34:027]: Restoring environment variables
MSI (s) (8C:24) [20:31:34:027]: Destroying RemoteAPI object.
MSI (s) (8C:48) [20:31:34:027]: Custom Action Manager thread ending.
MSI (c) (F4:1C) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (F4:1C) [20:31:34:027]: MainEngineThread is returning 1603
=== Verbose logging stopped: 7/05/2014 20:31:34 ===

Project 2010 SP1 Installation Crashes

I'm trying to create a package that will handle both brand new installations for Project 2010 as well as upgrade installations for those running Project 2007, the latter of which represents a large population in our environment.
I basically followed the same process I used when creating packages for Office 2007, Office 2010, Project 2007 and Visio 2007, all of which work today:
run setup.exe /admin
create a new .msp
make my adjustments (very few)
save into Updates directory
customized PrjPro.WW\config.xml (after first creating a backup!)
run setup.exe
I'm testing the package on a machine that previously had Project 2007, but after running for a short time, setup crashes. I thought maybe the problem was with the config.xml so I undid the changes one at a time, then moved up to restoring the orignal
config.xml file but it continues to crash.
There's a setup log in %temp% that contains what may be the core issue
PERF: TickCount=2427515 Name=OBootStrapper::Run Description=Begin function
Operating System version: 6.1.7601 Service Pack 1. Platform ID: 2
Running 32-bit setup on a 32-bit operating system.
Command line: "\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\setup.exe"
No command line arguments given
Verify file signature in "\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\setup.exe"
\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\setup.exe is trusted.
Verify file signature in "\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\PrjPro.WW\OSETUP.DLL"
\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\PrjPro.WW\OSETUP.DLL is trusted.
Using setup controller dll at [\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\PrjPro.WW\OSETUP.DLL].
PERF: TickCount=2428342 Name=OBootStrapper::Run Description=Calling RunSetup
PERF: TickCount=2428342 Name=RunSetup Description=Begin function
Catalyst execution began: 03/07/2014 13:30:43.
Setupexe Resiliency Mode is set to [PerformIfApplicable]; thus Resiliency is [disabled] for the [InstallExecutionMode]
Searching for updated versions of resource files under the 'updates' folder [\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\updates].
Found [0] resource files under the update folder.
Searching for default versions of resource files under the folder [\\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660].
Found [1] resource files under the default folder.
Running in [InstallExecutionMode]. Run from TEMP folder at [C:\Users\myuserid\AppData\Local\Temp\Setup00001fb8].
Loaded resource file [C:\Users\myuserid\AppData\Local\Temp\Setup00001fb8\OSETUPUI.DLL] (CultureTag=en-US).
Loaded Dll : \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\PrjPro.WW\OSETUP.DLL.
Catalyst version is : 14.0.4755.1000
JobExecutionMode is InstallExecutionMode.
Check if Office is supported on Windows 6.1.7601
Checking if CLSID_DOMDocument60 can be created.
Checking the version of MSXML6.
MSXML version check passed. Minimum required version is [6.10.1129], installed Version is [6.30.7601.17988].
LIS: start parsing setup xml
LIS: finished parsing LIS package "{90140000-0115-0409-0000-0000000FF1CE}"
LIS: start parsing setup xml
LIS: finished parsing LIS package "{90140000-0116-0409-1000-0000000FF1CE}"
LIS: start parsing setup xml
LIS: finished parsing LIS package "{90140000-003B-0000-0000-0000000FF1CE}"
LIS: start parsing setup xml
LIS: finished parsing LIS package "{90140000-00B4-0409-0000-0000000FF1CE}"
LIS: start parsing setup xml
LIS: finished parsing LIS package "{90140000-002C-0409-0000-0000000FF1CE}"
LIS: start parsing setup xml
LIS: finished parsing LIS package "{90140000-0010-0409-0000-0000000FF1CE}"
Product: PRJPRO
AddOnGroup Culture: en-us
AddOnId: OFFICE.EN-US
AddOnId: PROJECT.EN-US
AddOnId: PROOFING.EN-US
No upgradable applications found
Parsing config.xml at: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\PrjPro.WW\config.xml
Preferred product specified in config.xml to be: PRJPRO
Parsed setting: SETUP_REBOOT with value: Never in config.xml.
Logging type verbose specified in config.xml.
Log directory: C:\Users\myuserid\AppData\Local\Temp specified in config.xml
Log file template: Microsoft Office Project Professional Setup(*).txt specified in config.xml
COMPANYNAME specified in config.xml.
USERNAME specified in config.xml.
Product Deployment Mode: PerMachineManaged
Target Deployment Account Security Identifier: S-1-5-18
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\Office.en-us\OfficeMUI.xml
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\Office.en-us\OfficeMUISet.xml
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\Proofing.en-us\Proof.es\Proof.xml
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\Proofing.en-us\Proof.fr\Proof.xml
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\Proofing.en-us\Proof.en\Proof.xml
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\Proofing.en-us\Proofing.xml
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\Project.en-us\ProjectMUI.xml
Loading package metadata: \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\PrjPro.WW\PrjProWW.xml
Reading value of unintialized setting!
BRANDING: Parsing Branding Data...
BRANDING: Parsing Branding Data...
Pidkey specified in config.xml or setup.xml file. Skipping PidKey view.
Kicking off chained install...
PERF: TickCount=2434333 Name=Job::DoCacheWork Description=Begin function
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE is avaliable at C:\Program Files\Common Files\Microsoft Shared\Source Engine\OSE.EXE
This OSE has version: 12.0.4518.1014. Skip using this version of OSE because its version is too low.
Running Source Engine process detected
Running version: 12.0.4518.1014
Error checking already running ose version. Error code 0x00000000
Stopping running the problematic Source Engine process
Error attaching to OSE, error 0x00000000
Cannot start standalone OSE. from \\path\to\Microsoft Project 2010\SW_DVD5_Project_Pro_2010w_SP1_W32_English_MLF_X17-76660\PrjPro.WW\ose.exe. Error code: 0x80070102
Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
Error: Unable to select Source Engine process to start, see debug level logs for detail Type: 88::UnexpectedError.
Catalyst execution finished: 03/07/2014 13:32:07. Return code: 30088. Exception caught: UnexpectedError.
PERF: TickCount=2511881 Name=RunSetup Description=End function
I've checked a few things but I can't figure this out
restored config.xml
used no msp
Office Source Engine (OSE) service startup type is set to 'Manual'
copied ose.exe again from DVD
copied entire DVD over again
I'm beginning to wonder if there's an issue with the existing Project 2007 installation, or the way it was uninstalled [by the Project 2010 setup] - but maybe its something altogether different.
Any advice is greatly appreciated.

My point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Cannot programmatically select a task in Team planner - Office MS Project 2010

Hi,
I'm using Visual Studio 2010 32 bits, MS Project 32 bits on a windows 7 64 bits environment.
I created a MS project 2010 addin in Visual Studio. I can do many things with this addin, add ribbon, create tasks,
change colors in gant view...
However I cannot selected a task in the team planner view !
I use SelectTPTask in the application instance as referenced (http://msdn.microsoft.com/en-us/library/ms474284.aspx).
After this selection I want to change the color of the task by using SegmentFillColor method but nothing happens.
If I manually click on a task then SegmentFillColor works and the task color is changed.
Here is the code of the action:
private void buttonPriority_Click(object sender, RibbonControlEventArgs e)
var app = Globals.ThisAddIn.Application;
var pj = app.ActiveProject;
//create Tasks
Task newTask = pj.Tasks.Add("First task");
newTask.Duration = "3";
newTask.ResourceNames = "Resource A";
newTask = pj.Tasks.Add("Second task");
newTask.Duration = "4";
newTask.ResourceNames = "Resource B";
//Change color of the assignments
foreach (Task t in app.ActiveProject.Tasks)
if ((t != null) && !(bool)t.Summary)
bool b1 = app.SelectTPTask(t.UniqueID);
bool b2 = app.SelectTaskAssns();
bool b3 = app.SegmentFillColor(0xFFFFFF);
Is it a bug or I do not use it properly,
Thanks,
Alex.

Working solution (MS Proj 2013) for similar task is:
Sub ChangeTaskColorBasedOnCondition()
    Application.ViewApply Name:="Team Planner"
    For Each task In ActiveProject.Tasks
        Application.SelectTPTask (task.UniqueID)
        Application.SelectTaskAssns
        If (InStr(task.Name, "t"))
Then
            SegmentFillColor Color:=192
        Else
            SegmentFillColor Color:=0
        End If
        Application.SelectTPTask
    Next
End Sub

Error opening Project 2007 file after using project 2010

This is the second time I'm experiencing this problem.
Created a file (say Rev 1) in Project 2007 at work and took it home and updated it using Project 2010. When I finished updating using Project 2010, I saved the file in Project 2007 format. Came to work the next day, opened the file using
Project 2007 and did a "Save As" so that I have another revision of the file (Rev 2).
After updating Rev 2 in Project 2007 I closed it but when I came to work the next day I couldn't open Rev 2 file again either in Project 2007 or 2010. This has happened to me with 2 different files.
The error message I get is
An unexpected error occured during command execution.
Try the following:
Verify that all argumen names and values are correct and are of the correct type.
You may have run out of memory. To free up available memory, close programs, projects, or windows that you aren't using.

It seems to me that it has to do something with invalid characters in the file name of the timeline. Or it could be anything from an '&' to two concurrent spaces, mulitple '.' or even a dash (-). Stick with single spaces, letter and
number combinations and you should be fine. The problems arise based on how the file has been opened. Here’s one thread like yours. It could be useful for your, read http://www.filerepairforum.com/forum/microsoft/microsoft-aa/project/625-project-error-“an-import-error-occurred”

No content imports to Capt 6 from PPT 2010 on Windows 7

Hi,
This is my first post to a forum. I will try not to violate etiquette - please be patient.
I am using Captivate 6 and PowerPoint 2010 on Windows 7.
I have a PowerPoint presentation that contains just one slide. The slide has animation. The slide starts with an unanimated photo already on the screen; text and additional photos appear in a timed sequence.
I am trying to import this single-slide PowerPoint file into a Captivate 6 project.
To do the import, I have tried:
Using both programs in Administrator mode and non-Administrator mode.
Using File > Import > PowerPoint Slides; Import > PowerPoint Slide; and while on the Library tab, I have clicked the Import icon.
Selecting the Linked option and de-selecting it
Selecting the High Fidelity option and de-selecting it (when I select High Fidelity, I also select Slide Duration)
Advance on click and advance automatically
PPT as the format being imported and PPTX as the format being imported.
After the import completes, Captivate has created a new slide for the imported content and, if I selected to have the slide advance on mouse click, it puts in a click box over the slide. (If I selected for the slide to advance automatically, the click box does not appear.)
Nothing comes in from PowerPoint.
In the Library, when I right click on the imported file and select to edit it in PPT, it opens fine and all content appears. Also, the Use Count for the imported file shows as 1.
If anyone has any suggestions, I would love to hear them.
Thank you.

I was just able to validate with these simple instructions that finally worked!!
Navigate to:
C:/Windows/System32/Drivers/etc
Open the 'etc' folder and locate the file 'Hosts' (without quotes).
Copy the 'Hosts' file to your desktop.
Open the copied 'Hosts' file in Notepad.
Delete everything below the line '# ::1 localhost' (Again, no quotes) Save and close the copied 'Hosts' file.
Go back to the 'etc' folder and rename the original 'Hosts' file to 'Hostsold'. You may get an error message that you shouldn't do that....do it anyway. Now you have preserved the original 'Hosts' file if you have to go back to it.
Copy the 'Hosts' file from your desktop to the 'etc' folder.
Close all windows and, being sure that you are connected to the internet, launch LR6.
You should now be able to complete the validation process.
As to the export issues: it is very random. I will get the exact message and add it here when it happens again. Thanks!

Project 2010 Filter Selector (+/-) Not Displaying

Hello all.
I'm using Project 2010 and am having a problem with the "filter selector" - the "+" or "-" symbols which allow you to roll-up or expand sections.
I first noticed this with Summary Tasks in my project file not displaying the small boxed in "+" or "-" symbols. I've hunted around for a setting option that could affect this but haven't come up with one.
Now I've noticed the same thing when using the "Group by:" function and choosing "Critical." The tasks do group by Non-Critical and Critical - but there's no "+" or "-" symbols Critical: No or Critical:
Yes lines and thus I can not collapse them or expand them.
Complicating things is when I create a project schedule of my own in order to test things and those "+" or "-" symbols appear and function as expected. The project file in which they are lacking seems to lack them on other
computers than mine so it doesn't seem to be a particular hardware issue.
Is there some setting in Proj 2010 that I'm missing?
Is this an indication that the Project file itself is corrupted?
While a somewhat low level problem, this is reducing the functionality within that file and if the file itself is corrupted them that could lead to other problems.

Madoc,
There is a setting, (now hidden in Project 2010), that turns on and off the outline symbols and that setting is saved with the file. There are various ways to correct the issue but let me show you where to find the setting so the next time, if there is a
next time, you will be prepared.
1. Right click in the ribbon area to bring up the "customize the ribbon" item
2. On the right side of the Project Options window, hit "New Tab" and then "New
3. Under that new tab you will see a "New Group". Select it
4. On the left side chose "Commands not in the ribbon"
5. Find the Outline Symbols and select it
6. Hit "Add" to put that into your new group under your new tab
7. Hit "OK"
Now select your new tab on the ribbon and you should see the Outline Symbols option unchecked (for this particular file). Check it and close.
You might want to peruse the list of other commands not in the ribbon that you've been racking your brain to find and add those to your new tab. I did.
If the Outline Symbols option is already checked for this file then the file is probably corrupt. In that case save to XML and re-open in Project. Note, you will lose any custom formatting.
If this answers your question, please mark it as the answer.
Hope this helps.
John

Why does Project 2010 Pro crash on cut and paste operation, among many other problems?

I guess my question has more to do with this: I'm trying to find a hotfix, patch or update for this. Can you advise?
Thanks,
Aldo

Hi, Mike,
Thank you for your very informative reply. Please accept the comments below in the interest of understanding the problem a little better. I will read your articles and comment on them, if applicable.
What I think you are suggesting is basically for me to provide more information. Perhaps you could advise on how my concern could best be addressed. It's a simple matter of copying and pasting lines until it crashes, which I can't understand why I would
want to avoid, particularly when the actions of the interface clearly support it. So, from a UI design perspective I have to ask, if this is a valid task for an Excel spreadsheet why is it not for a Project spreadsheet?
Please bear in mind that the issue here is not related to the effective use of the product, but quite plainly why doesn't this stuff work out of the box on a simple paste operation?
By "Adding", in my previous comments, I mean go to the "Project" ribbon, and select the "Subproject" button. Following is a very detailed set of steps.
1. Open Microsoft Project 2010 Professional, in either 64 bit or 32 bit mode.
2. About Microsoft Project displays (14.0.4751.1000) MSO (14.0.4760.1000), by going to the quick access tool bar, selecting "Customize quick access tool bar", selecting "More commands", selecting from the pull-down "Choose commands
from" the option "All commands", and then the "About" option in the list view right below it. Press the "Add" button in the middle of the form. Press the OK button. You will see the about button on the quick access bar. Press
the button to see what version of the software this is. If you need additional information to help troubleshoot the issue, please let me know.
3. On the currently open default blank project, first save the project by pressing the save button on the quick access tool bar. I've named this file "Project1.mpp", and the physical file location is the Documents folder on Windows 7. The task
name becomes "Task 1". I then click outside the row.
4. Select the entire row by clicking on the number column to the left of the spreadsheet. Press the "C" key while holding down the "Control" key. Now select the next row and press the "V" key, while holding down the "Control"
key. Do it again if it makes you feel better.
5. Press Ctrl-S to save. Now close the project by clicking on the "File" menu and selecting the close button.
6. Create a new Project file, by selecting "File", then "New", then "Blank project", then "Create". Repeat steps 3 through 5 but this time name the project "Project2.mpp"
7. Click on an empty row on the spreadsheet. This will serve as the placement location of the sub-project. Click on the project tab, Click on the "Subproject" button on the left of the ribbon and select Project1.mpp. Your original Project1
will appear as a sub-project. Select a row in this subproject and copy and paste this row onto the previous project. Everything should work fine and your rows should paste.
8. Now try pasting onto the same subproject on the row below. The application crashes.
Thanks again for your reply,
Aldo

Project 2010 Gantt Bar Edit error

I am writing some Project 2010 VBA, and I have a section that deals with Gantt Bar settings. I run into an "Arugment is not valid" error at this line when running my module:
Application.GanttBarStyleEdit Item:="Task", From:="Start", To:="Finish", MiddleColor:=pjMaroon, MiddlePattern:=pjMediumFillPattern, LeftText:="Start", RightText:="Finish"
All of that should be valid. So, why is there an error?

Mr. Lee,
Actually if you look at the Gantt Bar Styles Edit window you will see that there is no "Start" and "Finish", hence the bad argument error. Instead use "Task Start" and "Task Finish".
Hope this helps.
John

Activating project 2010 on windows 8.1

Similar Messages

Maybe you are looking for