Activating PSE 4.0 After Installation
Hi, I'm trying to package Photoshop Elements 4.0 to be pushed out with Microsoft SCCM but don't want to activate it until after installation. Is there any way to skip activation until the first time PSE is run?
Any help would be greatly appreciated.
The above should have said like pse8 and pse 9 use.
I believe there were two versions of pse 4 for windows, one was the try and buy version
that you would get if one downloaded pse 4 from adobe and the other was the cd
version, which doesn't have a trial period, so i'm guessing there's not a way to install
without a serial number or delay putting the serial number in until after installation.
You can still download the try and buy version, but i couldn't tell you whether or
not it would accept your serial number.
MTSTUNER
Similar Messages
-
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
License Activation After Installation of an Windows 7 Image
I have a volume license installed on a image that I am deploying to machines in my office. After installation of the image on the computer I have to reactive the license. Is this normal procedure of is there someway I can ensure that the license
is activated after deployment so I can skip this step of the setup process?It is required that license activation occurs on each machine, after Windows is installed on each machine.
Every Windows license is individuated for every machine (a unique CMID is generated).
This is especially important for imaged/cloned machines. Are you using sysprep? Are you performing a rearm prior to image capture?
You can have the activation occur automatically. Are you using MAK or KMS ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Problems after installation with disp+work.exe
Hey guys,
i tried to find a solution, but didn't found one....after installation i had to find sapmmc. There was a error message after installation; after some adjustments in the service-file of windows now the message-server runs; but the disp+work still not....find the log attached:
Regards
Christian
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 5276
Fri Feb 01 15:35:19 2008
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5276) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Feb 01 15:35:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >christiank_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06330040, size: 4205552)
DpShMCreate: allocated sys_adm at 06330040
DpShMCreate: allocated wp_adm at 06331A28
DpShMCreate: allocated tm_adm_list at 063332E0
DpShMCreate: allocated tm_adm at 06333310
DpShMCreate: allocated wp_ca_adm at 066A35A0
DpShMCreate: allocated appc_ca_adm at 066A3A50
DpShMCreate: allocated comm_adm at 066A3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06724DB0
DpShMCreate: allocated gw_adm at 06724DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06724E20
DpShMCreate: allocated wall_adm at 06724E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Feb 01 15:35:29 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1708]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 10.10.0.10(christiank)
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 127.0.0.1(christiank.hidomain)
Fri Feb 01 15:36:14 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
ERROR => W0 (pid 5280) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4088) died [dpxxdisp.c 14318]
ERROR => W2 (pid 5020) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W3 (pid 4644) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W4 (pid 3080) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W5 (pid 5752) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W6 (pid 6040) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:24 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Feb 01 14:36:24 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5280 Ended no 1 0 0
1 DIA 4088 Ended no 1 0 0
2 DIA 5020 Ended no 1 0 0
3 UPD 4644 Ended no 1 0 0
4 ENQ 3080 Ended no 1 0 0
5 BTC 5752 Ended no 1 0 0
6 SPO 6040 Ended no 1 0 0
Dispatcher Queue Statistics Fri Feb 01 14:36:24 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
4
2000
5
5
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 7, udp 2 ( 28%), shm 5 ( 71%)
since last update total 7, udp 2 ( 28%), shm 5 ( 71%)
Dump of tm_adm structure: Fri Feb 01 14:36:24 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Feb 01 14:36:24 2008
=============================
Slots: 20, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:29 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >christiank_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3876) (SOFT_KILL)
Stop icman
killing process (3444) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3876 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3876 HANDLE:1556)
wait for end of icman
[DpProcDied] Process died (PID:3444 HANDLE:1572)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5276) [dpxxdisp.c 10333]
Good Bye .....
Edited by: C. Koch on Feb 1, 2008 3:35 PMDuring BW system copy, NW04S.
We do have simalr error message loosing our time to bring up the system:
[disp_dev]
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri May 2 19:35:54 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0088.qqq.nxst) took 6 se
conds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Fri May 2 19:35:55 2008
WLM Tag 'BD2/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri May 2 19:36:00 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1716]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[sapinst_dev.log]
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Softwar
e Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP and AS Java
> Central System( Last error reported by the step :<html> <head> </head> <body> An exception occurred while connecting to
the message server instance BD2/DVEBMGS00 on host nvdbw40, port 3900.<br>DIAGNOSIS: The original exception was: wapsmod.
ms.MsAttachFailed:
Connect to message server (nvdbw40/3900) failed: NIETIMEOUT..<br>SOLUTION: Make sure that the message server is started.
</body></html>). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log
</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log fi
les are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/. </p> </body></html>
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-05-02 23:54:49.854 [sixxcstepexecute.cpp:1004]
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_Syst
em|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start".
[dev_w0]
Fri May 2 19:35:56 2008
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [165.140.111.55] nvdbw40 (HOSTNAME)
2 : [127.0.0.1] loopback (LOCALHOST)
3 : [165.140.114.55] bnvdbw40 (NILIST)
Full qualified hostname = nvdbw40
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri May 2 19:41:30 2008
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17386]
M
- Need a help
Thank you -
I have 2 Apple ID"s, one for buying app's (since the first iPhone) in the store and another one for operating with iCloud things. Now, after installation/activation of my new iPhone 5s, the Touch ID is connected to the iCloud world. Conclusion, if I like to buy a new app. I still have to fill in the password for the other Apple ID. In the past I asked Apple to may join both, but that seems to be impossible.
Anyone a solution?I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.
-
Photoshop elements 11 just after installation in the editor the mouse does not even scroll top menu
HI guys
Very dissapointed so far by this adobe soft, that I just installed a few hours ago. At this point it is worthless and no way I can use it like that . After installation I went directly into the editor and right away I saw that the software was very sluggish with my cursor dragging . After clicking on a top menu (File) the menu bar open (5 sec.)and if I scroll it down I do not see the blue color following my cursor, and if I click at the location in the bar of my cursor it takes a few second before it respond. I am also using the following adobe softwares that works flawlessly : Photoshop CS5.5 extended; Bridge; Camera Raw; Lightroom 4.2. My computer uses an Asus P7P55-E Premium motehrboard with Win 7 pro 64 bits with an intel I 860 2.8 mhz and 8 gigs of RAM. All my adobe softs are 64 bits, except for elements 11. After seeing that, I installed the upgrades without any visible problems. Even after that nothing has improved.
I have to say that I have quite a few softwares installed that all work perfectly such has Topaz bundle; Photomatix pro, etc. In fact of all my softwares this is the only one that is giving me troubles.
I hope somebody has a solution for this extremely poor behavior.
Thanks
LucI think you are using Win7, if yes please try the following
Right click on the PSE icon and select Run as administrator
Now try to use it, check if there is any change or not.
Harshit -
Adobe Premiere Elements does not open after installation
Hello,
I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
I hope you can help me out!
Thanks!
IngeYes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
The Photoshop Elements worked.
I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
thanks
Inge -
Can't open Acrobat 9 Pro or Distiller after installation
All seemed fine:
Installation by Drag and Drop, done
Entering the Product key, Done
Entering Registration Informations, Done
But since that Acrobat 9 Pro does nothing. I only see the "buisy" mouse pointer, which is the turning watch, but Acrobat does not respond anymore, but takes about 60% of CPU.
In Finder I get the information message, that the programm does not respond anymore, so I only can kill that process...
Same with Adobe Distiller....
Any guess? THX
MacBook Black, 2,1 GHz, 2GB Ram and runnig Mac OS 10.5.6Well,
it wasn't a permission, it wasn't administrator... it simply was the company proxy server.
After installation, Acrobat allways wants to send the registration form by HTTP to Adobe.
Now the problem is, that our Proxy needs an authentification. Acrobat uses the entry in the keychain, but still cannont connect the port of Adobe, because this port ssems to be shut by our company system.
So I disabled all network ports on the system preferences, and restarted acrobat again. Now Adobe claims, that it is unable to send the registration, because of missing an active internet connection and want's a user choice, for send now, send later or cancel. I choosed send later and acrobat start up without any problems later.
Now I was going to the help menue, and disabled the automatical update process and automatical registration process.
Now Acrobat runs like a charm.... -
How to make my application icon ancor in task bar after Installation
I want my application icon to acor in the task bar after installation such that users can right-clik on it
do some changes to the applications. I want it in the active icons bar next to the timer (around there). How do I achieve thisJDIC project provides this type of functionality through JNI implementation - you can take a look here:
https://jdic.dev.java.net/ -
Runtime Error! after installation of Photoshop Elements 10
Yesterday I installed Photoshop Elements 10 and Premier Elements 10. After installation, whenever I log into my user account in Windows 7, I receive a Microsoft Visual C++ Runtime Library Runtime Error! It further says Program: C:\Program Files (x86)\Adobe... This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. In addition to logging into the windows account, the same error sometimes occurs when Photoshop Elements Organizer, editor and Premier Elements is started. My wife has another account in windows and does not get this error in any of the above cases. After clearing the error, I seem to be able to use the programs, but this occurs every now and then.
What can I do to repair the installation? I tried uninstalling and reinstalling, but the problem remains. Any help with this would be appreciated. Thanks.More information. I tried uninstalled PSE and then set up a new user account. Reinstalled PSE from the new account. Everything works fine in the new user account and my wife's user account. The account with problems continues to get the same error when logging in or starting PSE.
Checked the error using event viewer and found that the problem is with dynamiclinkmanager.exe. After logging in to the working accounts dynamiclinkmanager is running, but is not in the problem account. Cannot find any differences between the accounts. Below is the event viewer data. Any help is appreciated.
Log Name: Application
Source: Application Error
Date: 1/9/2012 5:50:34 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Desktop-VM
Description:
Faulting application name: dynamiclinkmanager.exe, version: 3.0.0.0, time stamp: 0x4e5e6ffc
Faulting module name: MSVCR90.dll, version: 9.0.30729.4940, time stamp: 0x4ca2ef57
Exception code: 0x40000015
Fault offset: 0x0005beae
Faulting process id: 0xdb4
Faulting application start time: 0x01cccf21115396c1
Faulting application path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\CAHeadless\32\dynamiclinkmanager.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4940_none_50916076bcb 9a742\MSVCR90.dll
Report Id: 56d13743-3b14-11e1-a1e8-bcaec523a610
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-01-09T22:50:34.000000000Z" />
<EventRecordID>48682</EventRecordID>
<Channel>Application</Channel>
<Computer>Desktop-VM</Computer>
<Security />
</System>
<EventData>
<Data>dynamiclinkmanager.exe</Data>
<Data>3.0.0.0</Data>
<Data>4e5e6ffc</Data>
<Data>MSVCR90.dll</Data>
<Data>9.0.30729.4940</Data>
<Data>4ca2ef57</Data>
<Data>40000015</Data>
<Data>0005beae</Data>
<Data>db4</Data>
<Data>01cccf21115396c1</Data>
<Data>C:\Program Files (x86)\Adobe\Elements 10 Organizer\CAHeadless\32\dynamiclinkmanager.exe</Data>
<Data>C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4940_none_50916 076bcb9a742\MSVCR90.dll</Data>
<Data>56d13743-3b14-11e1-a1e8-bcaec523a610</Data>
</EventData>
</Event> -
I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro retina???
There is a fix; I finally discovered how to clear the Windows 7 xx64 Device Manager's warning of a missing Bluetooth Peripheral device.
Thinking Boot Camp 4.0 would correct thid, I installed it ititially today only to have the warning remain.
The Bluetooth company called Broadcom (you notice the reference during the installation of Boot Camp) offers a BlueTooth "device finder" (my phraseology) that detects all BlueTooth devices in your Apple or PC but withing a Windows operating system; included are Windows 7 , Vista, XP and even 2000 operating systems.
So download the 3 MB file, from Broadcom.com. While your Bluetooth equipment is plugged in to the computer, run the program. The program searches for any BlueTooth peripheral activated equipment and BlueTooth devices that makeup your MacBook Pro, or other Apple or a plain PC computer having a Windows operating system installed. It then downloads the appropriate software required.
The company's URL address:
http://www.broadcom.com/support/bluetooth/update.php
In my case, I ran the program, rebooted my MacBook Pro (in Windows 7 x64 and with the new Boot Camp 4.0 installed) and the missing BlueTooth peripheral device indication was eliminated. It took 10 minutes to complete. -
i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me
That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
Application directory Partition, Reverse lookup Zone , after Installation of Tree Domain
I have multiple domains (Windows Server 2008 Enterprize, and funtional level 2008) in an exisiting forest
after installation of new Tree domain i am facing the problem in creating reverse zone in DNS
Error message
"the partition to replicate zone data top all dns server that domain controllers on the active directory ws not created. The application directory partition operation failed. the domain controller holding the domain naming master role is down or unable
to service the request or is not running windows 2003"
plz reply soon i am facing a trouble .
WajahatThe error message states that your domain naming master role holder is down or not responding.
First, you need to identify which one of your DCs is the holder of this FSMO role: You can use
netdom query fsmo command for that. If there is no DC that is currently holding this FSMO role then you need to size to one of them: https://support.microsoft.com/KB/255504?wa=wsignin1.0
If one of your DCs is holding the role then you need to check why it is not responding or unreachable. This could be checked by running
dcdiag on this DC to do a health check.
I would also recommend that you refer to recommendations I shared here: http://www.ahmedmalek.com/web/fr/articles.asp?artid=23
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Mac Pro will not restart after installation of Lion. Help!
Mac Pro will not restart after installation of Lion. Help
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
Archlinux fails to find lvm volumes after installation
Hi,
yesterday i installed archlinux on a logical volume, root and boot are both on this volume (/dev/mapper/volg-arch).
the filesystem is ext3. the setup recognized the volume group and activated all volumes, so the installation was no problem, but when i try to start the system after installation, no volume group can be found.
lvm2 was enabled during installation using USELVM="yes" in rc.conf and HOOKS="base udev autodetect pata scsi sata keymap lvm2 filesystems" in mkinitcpio.conf.
i use grub2 to boot the system with the following entry
menuentry "Arch" {
linux (volg-arch)/boot/vmlinuz26 root=/dev/mapper/volg-arch
initrd (volg-arch)/boot/kernel26.img
it boots, however it cannot find any volume groups and because of that cannot load the root-filesystem.
my other linux-system works great, which is installed on lvm2 and using grub2, too.
did i miss a configuration?yes, grub2 supports it., which is really great.
mkinitcpio was run after modifying mkinitcpio.conf automatically by the setup.
its really odd that it works during the setup but not later.
:: Running Hook [lvm2]
Scanning logical volumes...
Reading all physical volumes. This may take a while...
No volume groups found.
Activating logical volumes...
No volume groups found
:: Running Hook [filesystems]
then it fails with errors (because of course no root-device could be found) and the ramfs-shell is started.
i think lvm-support is enabled,
because it is scanning for volumes.
edit:
just tried to boot with the following entry
menuentry "ArchInstall" {
linux (volg-arch-install)/isolinux/vmlinuz root=/dev/mapper/volg-arch
initrd (volg-arch-install)/isolinux/initrd.img
this is the volume where i copied the install-cd to (i have no cd-drive and did a hdd-install) and installed the system from.
IT WORKS! but of course it takes too long to load this setup-initrd for using the system.
so my initrd, generated by the setup, is wrong :-/
any hints?
Last edited by Lazer (2007-10-18 16:08:47)
Maybe you are looking for
-
HT3951 how do I unlock my ipod touch
My children locked up my ipod and it is saying ipod disables connect to itunes..I am connected to itunes now but still nothing..Please help me
-
How can I pass the gt_outtab for cl_salv_table via a form parameter?
Hello, I have put everything displaying the alv into a form routine and want to pass the gt_outtab-table, which contains the data to be displayed, as a table parameter. Then I receice the error CX_SY_DYN_CALL_ILLEGAL_TYPE regardless if it is a typed
-
How can I import a class in my program?
In my program I want to use a class named "WordExtractor" that resides in a jar file named "poi-3.0.1-FINAL-20070705.jar". This jar file is stored on my computer under: D:\java_projects\Word Reader\poi-bin-3.0.1-FINAL-20070705\poi-3.0.1-FINAL\poi-3.0
-
Apples in Public Libraries Program Versus Advertising Campaign
One thing Apple does not seem to realize is that in many areas of the country, such as rural areas, there is no access to Apple computers for the general public. Even the local Best Buy don't have them in the store. The last time there were any Macs
-
Which application should I use?
The search function for this forum returns an error message (I've reported it), so excuse me if the answer would have been easy to find. I'm writing a book on living cheap. I want to make it available for donations. (I figure that the people who need