Activating SNC in SAP
Hi everybody,
First of all, please excuse me if I'm not posting in the right group. If
so, could you please redirect me to the appropriate forum?
Ok, so here's my problem...
I'm trying to activate SNC on a IDES SAP ERP 2005 (NW04s) system (running on a Solaris 10 x64). I followed the documentation inscructions and
added the following parameters to my SAP instance profile (using the
RZ10 transaction)
snc/enable = 1
snc/data_protection/min = 1
snc/data_protection/max =13
snc/data_protection/use = 1
snc/accept_insecure_gui = 1
snc/accept_insecure_cpic = 1
snc/accept_insecure_rfc = 1
snc/accept_insecure_r3int_rfc = 1
snc/r3int_rfc_secure = 0
snc/permit_insecure_start = 1
snc/gssapi_lib = /usr/lib/snckrb5.so
snc/identity/as = p:[email protected]
My GSS-API library successfully passed the tests done by the sap test
tool.
When I restart my SAP system I get the following error in the Syslog:
Initialization SNC Failed, Return Code -000004 or Initialization SNC Failed, Return Code -000001
This error is repeated several times, then the server terminates.
Does anyone have an idea of what I'm doing wrong?
Thanks for your help,
Hi,
Can you recheck Parameters
snc/data_protection/max =13
snc/data_protection/use = 1
snc/gssapi_lib = /usr/lib/snckrb5.so
For more helpful you can check with the following link
http://help.sap.com/saphelp_nw04/helpdata/en/19/164442c1a1c353e10000000a1550b0/frameset.htm
Cheers
Soma
Similar Messages
-
I am trying to enable SNC on SAP Server. I have downloaded the SAP Cryptographic library and installed it as per in the instructions in http://help.sap.com/saphelp_erp2004/helpdata/en/96/709b3ad94e8a3de10000000a11402f/frameset.htm
Using STRUST transaction I created a PSE for SNC.
I have modified with the instance profile (using RZ10 transation) and specified the following values
snc/enable - 1
snc/accept_insecure_rfc -1
snc/accept_insecure_gui - 0
snc/accept_insecure_cpic -1
snc/permit_insecure_start -1
snc/data_protection/min - 2
snc/extid_login_diag -1
snc/extid_login_rfc - 1
and restarted the SAP Server.
I got the following error
trc file: "dev_w7", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Nov 16 18:44:31 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 5840
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 7 5840) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F90040, size: 3192688)
M DpShMCreate: allocated sys_adm at 05F90040
M DpShMCreate: allocated wp_adm at 05F91B58
M DpShMCreate: allocated tm_adm_list at 05F94478
M DpShMCreate: allocated tm_adm at 05F944A0
M DpShMCreate: allocated wp_ca_adm at 0623B0E8
M DpShMCreate: allocated appc_ca_adm at 06240EA8
M DpShMCreate: allocated comm_adm_list at 06242DE8
M DpShMCreate: allocated comm_adm at 06242E00
M DpShMCreate: allocated vmc_adm_list at 06289AD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06289AF8
M DpShMCreate: allocated wall_adm at 06289B00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Nov 16 18:44:32 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 43
C patchcomment View with literal containing (0x60) (786638)
C np:(local) connection used on SAP50UNI
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:33 2007
C Provider Release:08.10.1830
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:44 2007
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes
C Using shared procedure name cache SAP50UNI_EUCEUC_EUC_MEM initialized by another process.
C Connected to db server : [SAP50UNI] server_used : [np:(local)], dbname: EUC, dbuser: euc
C pn_id:SAP50UNI_EUCEUC_EUC
C Not using MARS (on sql 8.0)
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20071116 184432 SAP50UNI
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I
I Fri Nov 16 18:44:52 2007
I MtxInit: 7 0 0
M SHM_PRES_BUF (addr: 0A650040, size: 4400000)
M SHM_ROLL_AREA (addr: 5F030040, size: 159744000)
M SHM_PAGING_AREA (addr: 0AA90040, size: 72089600)
M SHM_ROLL_ADM (addr: 0EF60040, size: 1595440)
M SHM_PAGING_ADM (addr: 0F0F0040, size: 525344)
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F180040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 08060040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 7, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 140600C8, size: 30000000, end: 15CFC448)
B dbtbxbuf: Buffer TABLP (addr: 15D000C8, size: 10240000, end: 166C40C8)
B dbexpbuf: Buffer EIBUF (addr: 166D00D0, size: 4194304, end: 16AD00D0)
B dbexpbuf: Buffer ESM (addr: 16AE00D0, size: 4194304, end: 16EE00D0)
B dbexpbuf: Buffer CUA (addr: 0FC300D0, size: 3072000, end: 0FF1E0D0)
B dbexpbuf: Buffer OTR (addr: 16EF00D0, size: 4194304, end: 172F00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/32/32)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): Trying builtin default as a
N gssapi library name: "sncgss32.dll".
<b>N SncInit(): snc/gssapi_lib UNDEFINED in profile!
N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
<b>M *** ERROR => DlLoadLib: LoadLibrary(sncgss32.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
N [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded</b></b>
N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 223]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 225]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 7
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 7 5840) [dpnttool.c 357]
I am unable to connect to SAP Server using SAP GUI.
Any help on this is appreciated.
Thanksyou have two problems (read the log):
> C Failed to initialize provider SQLNCLI. See note
> #734034 for more information.
> C Using provider SQLOLEDB instead.
> C OpenOledbConnection: Failed to set MARS property.
Check the mentioned note.
> SncInit(): Trying builtin default as a
> gssapi library name: "sncgss32.dll".
> ncInit(): snc/gssapi_lib UNDEFINED in profile!
> N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
> <b>M *** ERROR => DlLoadLib:
> LoadLibrary(sncgss32.dll) Error 126 [dlnt.c
> 237]
> Error 126 = "The specified module could not be
> found."
> *** ERROR => SncPDLInit():
> DlLoadLib("sncgss32.dll")=DLENOACCESS
> [sncxxdl.0340]*** ERROR =>
> SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll
> not loaded</b></b>
> N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
> N sec_avail = "false"
> M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001)
> [thxxsnc.c 223]
> M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT)
> [thxxsnc.c 225]
> M in_ThErrHandle: 1
> M *** ERROR => SncInitU (step 1, th_errno 44, action
> 3, level 1) [thxxhead.c 9413]
the log clearly sais, what to do... what is unclear?
Markus -
BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina JoshiHi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
-- Hardware Sizing
-- Preparation of Data Centres
-- HANA Hardware preparation
-- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
-- House Keeping activities on BW system (data clean up, etc)
Post Installation:
-- Sanity checks / Preparation and License checks
-- JAVA Configurations
-- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
-- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
- ZBW_HANA_COCKPIT Tool
- ZBW_HANA_CHECKLIST Tool
- ZBW_ABAP_ANALYZER Tool
- ZBW_TRANSFORM_FINDER Tool
- SIZING Report
- System Clean up Activities
- Impact of 7.4 on source system checks
- Java Upgrade for portal
# DMO Stages
- Preparation & Pre Migration checks
- Execution / Migration
- Post Migration Activities
# Testing Phase
- Source system checks/Activities
- System and Integration Testing
- End to End Testing
- Performance testing
- Reports
- BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren -
Clipboard activity coming from SAP ERP in an interaction record
Hi, do you know if it's possible to have activity created in SAP ERP to be linked to an interaction record in CRM? As an exemple; A customer call, interaction record is started, the rep modify something for that customer in SAP ERP (IS-U). Is it possible to see in the clipboard for that interaction record the object that was modified in the ERP? Thanks
Sijo thank you so much for your reply. I guess thats the way we are heading towards as we found there's nothing you can do from the config. Now we are trying our luck through customer development.
Thank you so much for your reply.
Cheers
Jack -
SNC between SAP BO and SAP BW for MS Advanced Analysis
Hy experts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
No applicable data found.
On the SAP BW system, on ST22 there is this runtime error:
CALL_FUNCTION_SEND_ERROR.
An error occurred when executing a Remote Function Call.
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
What happened?
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
An error occurred when executing a Remote Function Call.
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "SNC (Secure Network Communication)"
Place................ "CPIC (TCP/IP) on host ANDREA_13"
Version.............. 5
Error code........... "-12"
Error text........... "SNCERR_INVALID_FRAME#A received frame is
invalid/truncated or is no SNC-frame"
Description.......... "SncProcessInput"
System call.......... " "
Module............... "sncxx.c"
Line................. " "
The error reported by the operating system is:
Error number..... " "
Error text....... " "
User and Transaction
Client.............. 100
User................ 00000015
Language Key........ "E"
Transaction......... " "
Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
Program............. "SAPLRSBOLAP_BICS_PROVIDER"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."C:\Program Files\Microsoft Office\Office1"
Function Module..... "BICS_PROV_GET_INITIAL_STATE"
Call Destination.... "GBP_boe_Default"
Source Server....... "ANDREA_13"
Source IP Address... "10.101.3.80"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
"BICS_PROV_GET_INITIAL_STATE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1
of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
Could you help me?
Thank's a lot and best regards.
Andrea MaravigliaCiao Andrea,
just a couple of hints:
- Did you already tried to skip logon to BOE and instead directly select BW system? this should avoid to involve snc and then BEx query should be accessible. This would be a further confirmation that issue is the SNC, even if the log you posted is pretty clear about that.
- Do you have snc installed even in local PC running MS Advanced Analysis? I Think it is necessary for the described workflow (page 24 of Admin Guide):
"With SAP BusinessObjects Enterprise as the BI platform, single sign-on works if the following conditions
are true:
u2022 BusinessObjects Enterprise XI 3.1 is configured correctly for single sign-on. For more information,
see u201CConfiguring SAP authenticationu201D in the Integration for SAP Solutions Install and Admin Guide
at http://service.sap.com/bosap-instguides SAP BusinessObjects Business Intelligence (BI) >
Integration for SAP Solutions > XI 3.1.
u2022 Secure Network Communications (SNC) is installed on each client PC. For more information, see
SAP Help Portal at http://help.sap.com SAP NetWeaver > SAP NetWeaver Library > SAP
NetWeaver by Key Capability > Security > Network and Transport Layer Security > Secure
Network Communications.
u2022 Each end user has a user account in the connected BW system."
Furthermore, if I rember correctly, there could be restriction in license using SAP Cryptographic Library (client connection is not supported: SAP notes 597059 and 397195), so you should check your SNC software.
Hope it could hep.
Regards.
Roberto. -
Hy esperts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
No applicable data found.
On the SAP BW system, on ST22 there is this runtime error:
CALL_FUNCTION_SEND_ERROR.
An error occurred when executing a Remote Function Call.
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
What happened?
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
An error occurred when executing a Remote Function Call.
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "SNC (Secure Network Communication)"
Place................ "CPIC (TCP/IP) on host ANDREA_13"
Version.............. 5
Error code........... "-12"
Error text........... "SNCERR_INVALID_FRAME#A received frame is
invalid/truncated or is no SNC-frame"
Description.......... "SncProcessInput"
System call.......... " "
Module............... "sncxx.c"
Line................. " "
The error reported by the operating system is:
Error number..... " "
Error text....... " "
User and Transaction
Client.............. 100
User................ 00000015
Language Key........ "E"
Transaction......... " "
Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
Program............. "SAPLRSBOLAP_BICS_PROVIDER"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."C:\Program Files\Microsoft Office\Office1"
Function Module..... "BICS_PROV_GET_INITIAL_STATE"
Call Destination.... "GBP_boe_Default"
Source Server....... "ANDREA_13"
Source IP Address... "10.101.3.80"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
"BICS_PROV_GET_INITIAL_STATE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1
of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
Could you help me?
Thank's a lot and best regards.
Andrea MaravigliaHi Ingo,
the runtime error occurs in this scenario:
1) Launch MS Advanced Analysis
2) Logon on SAP BO
3) Select the System connection for SAP BW where the SNC has been configured
4) Select the bex Query
5) The system response with this message: No applicable data found.
On ST22 , on SAP BW, there is the runtime error: CALL_FUNCTION_SEND_ERROR with the message:
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame".
Thank's a lot.
Best Regards.
Andrea
Edited by: Maraviglia Andrea on Jan 24, 2011 6:02 PM -
Activity Creation in SAP from MSP ( Micro Soft Project )
Dear All,
Regarding activity cretaion in SAP from MSP, I have one query....
I know that we can definitely create internal activities from MSP , but there is a requirement to create extrenal / service activities. So just want to know whether external / service activity can be created from MSP or not.
Please share your views...
Regards,
Ashok SangalHi,
Yes it is possible.
Under settings of OPENPS use more control keys as defined in IMG contomizing.
The control key determines whether the activity is processed internally or externally.
Regards,
Harsh. -
Service activity creation in SAP from MSP (Microsoft Project)
Dear All,
As we are planning to integrate SAP & MSP, I have one query regarding service activity creation in SAP from MSP.
In case of service activity in SAP we have to assign respective services also otherwise it does not get saved.So when we transfer service activity from MSP (after maintaining the respective control key in MSP ) how we will manage with all services because we can not define these service in MSP.
Apart from that we have some procurement parameters also like material group, purchasing org, price, outline agreement....we have nothing in MSP for these...so how we will manage with this.....
Please just share your valuable input to deal with this....Thanks..
Regards
Ashok SangalHi Harsh
Thanks for your quick reply......
I agree with you that by flexible field mapping we can do but my concern is that service activity should have services also defined in MSP because when this will come to SAP , it will ask for services & if services are not available then this will fail.
Please suggest your opinion ..
Regards,
Ashok Sangal -
Creating CRM 7.0 Activity from ISU SAP GUI (CIC0)
Hello Guys!
I need to create CRM 7 Activity from ISU SAP GUI cic0 screen using actiion box. Can any one please help me out what would be the best way calling CRM 7 activity from ISU SAP GUI, with my understanding the CRM 7 would not support sap gui and have to use webclient technology.
My scenario: Creating activity in CRM 7.0 from ISU GUI.
Existing process is creating an activity in CRM 4 from ISU SAP GUI, now business would like to move from CRM 4 to CRM 7. I need to find out or give suggestions to business what would be the best approach or solution to create CRM 7.0 activity from ISU point of as business would not like to use CRM WebClient screen to create activities. I need help on how i can suggest the busines.
Please help me out as i am new to ISU and hope you have understood my requirements.
Thank you in advance
Regards
shankarHi ,
Kindly use the Transaction launcher service using the Customization :
SPRO > CRM > UI Framework > Technical Role Definition > Transaction Launcher > Configure Transaction Launcher
SPRO > CRM > Interaction Center WebClient > Basic Functions > Transaction Launcher > Configure Transaction Launcher (Wizard)
Kindly read help documentation next to it for details.
Hope this helps.
Regards,
Anup -
Please update me migration activity plan in sap mm point of view
Hi,
In our company, we have two company codes have two plants each one, Now management decided to these two plants in to one company code existing, please update me migration *** Merger activity plan in sap mm point of view?
Padma
Edited by: padmap on Apr 14, 2010 7:08 AMI guess it can be done. You need to cut all links of plant to the existing company code in ENTERPRISE STRUCTURE, and then reassign the said plant to the other company code.
Edited by: Afshad Irani on Apr 14, 2010 11:23 AM -
Add users from several Active Directories in SAP BPC
Hello everybody,
Does anybody know if you can add users from several Active Directories in SAP BPC??
In affirmative case, how can you add several Active Directories in SAP BPC??
Thank you very much.
Best regards,
FernandoHi,
We almost have same issue to add users from several Active Directories.
BPC server is in Domain A. We perform to add users from Domain B. Our trusted relation between AD is Domain B approve Domain A (unidirectional).
We cannot get one user which is able to browse both AD. So we install BPC with a user which has rights to browse Domain A and we use another user in COM+ component (OsoftUSerManage) which has right to browse Domain B.
But it is not working : we encounter an issue (access denied) in web administration by adding users from Domain B.
Any idea ?
Env. : BPC 5.1 SP6 -
CRM Activity Replication to SAP R/3
Hi,
We have extended CRM Activity and have added the 'Customer Screen' tab. The data gets populated through the PPF BADI.
We have a scenario for which we need to replicate this 'Additional Data' along with some standard information from CRM Activity to SAP R/3.
I am planning to do following....
1. Extend BDoc BUS_TRANSACTION_MESSAGE --> Segment BUS_TRANS_MSG_ACTIVITY to accomodate new fields.
2. Implement another 'Z' function module which will be called at MOA,MOB,MOC flow context for the bdoc. The purpose of this function module will be to populated the newly added fields of the segment from database.
3. Change Adaptor Object BUS_TRANS_MSG to have CRM to R3 Mapping function module. This will be a 'Z' function module. The purpose is to map the mBDoc data into BAPIMTCS format.
4. Register this function module in table SMW3FDCUST.
5. Create a Receiver 'Z' fucntion module. The purpose of this function module is to convert the BAPIMTCS format into the format required by R/3.
6. Register this function module in CRMSUBTAB.
Can anyone please confirm that the steps I have mentioned are correct and that's the way it should be done.
Any help/suggestions are most welcome.
Thanks,
Amitok,
Might be easier using EEWB (business activities are included, but haven't tried it yet)
1. Extending of the bdoc: I cannot find the segment you're refering to. I would think that you'll have to enhance segment activity_h, structure bad_activity_h_mess.
2. The flow context is used to process the bdoc, not to fill it. Maybe the fields are automatically filled when you enhance the bdoc (move-corresponding), but I wouldn't count on it.
--> You'll have to update the fields in the bdoc from memory before you actually complete the LUW of saving the activity.
3.4.5. The adapter object is used for initial loads, filtering, sync loads and ...
If you want to send your fields to R/3 in the BAPIMTCS table, you'll have to fill this table either in a user-exit (like smoutil3) or add a function to the flow context (and call an R/3 RFC yourself).
--> It might be easier to just add a function to the flow context and pass the data from this function to an RFC in R/3.
Grtz,
Michael. -
DSO Activation error in SAP BI 7.0
Hi all,
I am trying to activate a DSO which is created by me in SAP BI7.0.When I save the DSO it didn't placed any error even when I clicked Check it dispalyed as consistent.But When I clicked activate it placed an error saying the DSO cannot be actvated.
1.The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
2. Error when opening an RFC connection
Message no. RSAR051
3.Error when creating the export DataSource and dependent Objects
Message no. RSDODSO169
4. Error when activating DataStore Object
Message no. RSO404
I have tried to check the RFC connection in SM59 but I didn't find anything.If we need to create an RFC connection then please let me know the steps.This activation of DSO is very important as it is stopping all the work.Please suggest me what Steps need to be taken now as this is very important.
Regards
Din SM59 double click your XYZ destination,might have to correct the IP address in SM59
perform a "test connection"
if not fine then check the target host, system number and name/ip and modify them accordingly; don't forget that this is MyBW system you have to maintain actually your XYZ host details.
if the test went through, the next is to test authorizations: menu test, authorizations. Check tab logon/security settings; you should use ALE as user... you need to know this pwd if you change it!. Check if this user is not locked.
Hope it Helps
Chetan
@CP.. -
Portal Activity Reporting and SAP Business Warehouse
Hi,
Does anyone out there know if SAP has or plans in the near future to deliver Portal Activity Reporting content via SAP Business Warehouse?
I would have thought BW would have been the ideal solution to enable some "out of the box" Portal Content in terms of extracting the data from the tables used for the Portal Activity reports, and then extracting them to BW for slicing/dicing & Presentation.
The current standard Portal Activity reporting does not supply what we need. We don't want to spend time and money developing this ourselves if SAP has plans to deliver it in the near future.
Any news please?
Cheers, Phil G.Hi,
Check this blog which tells about the future of Activity Reporting..
The Final Word (Hopefully) on the Portal Activity Report
John -
How to use the activation library on SAP J2EE Engine
Hi my friends:
This post is referent to a note and their solution, but the solution is not clearly:
Symptom:
One wants to use the activation library provided together with the j2ee engine from an own library.
Reason and Prerequisites:
One wants to use the activation library from an own library but a ClassNotFound Exception or a NoClassDefFoundError keeps showing up.
Solution:
For J2EE Engine 6.30/6.40:
To avoid the above mentioned exceptions one has to specify circular references between the activation library and the specific resource. When the engine's classloading system sees such references it creates a common loader for these resources and avoids the issue.
Some one knows how to do circular references in my program????,
i can use web applications or web dynpro with SAP Developer Studio Kit.
thnsk Forum
JoshuaHi,
This is the info from help.sap.com on libraries and how provider.xml sjould look like:
http://help.sap.com/saphelp_nw2004s/helpdata/en/16/df813e77d46245e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/2ade3fc6c6ec06e10000000a1550b0/content.htm
this is the dtd:
http://help.sap.com/saphelp_nw2004s/helpdata/en/09/5d963be736904c96cbdfe93793eb42/content.htm
The file itslef is located in the library archive in server folder usually.
I hope this helps.
Greetings, Myriana
Maybe you are looking for
-
Remote desktop to laptop running Window 7 from laptop running Windows 8.1 on same network
I am trying to remote desktop into my Windows 7.1 laptop with my Windows 8.1 laptop. They are both connected to the same network and I can ping each other with their dns names. I can even use Windows Explorer to explore the file system of each lapt
-
I need to build a flash based menu and want to learn how to do the same cool functionality that I see on the http://grandcentral.com website. Notice on the "features" menu how when you click on an item the arrow will scroll down to that menu item. I'
-
I'd like to use a multilevel Jtree as a navigation tool in a JClient. I read in this forum that the navigation model of Jtrees is incomplete. I'd like to know (from the JDev team) if I'm right and ,in this case, the release I've to wait for. Thanks M
-
Layers Appear, but are not selectable
I receive PDF files from Engineers & Architects which I presume were created from AutoCAD (or similar) software. Many of these files appear to have individual layers. I.E.: when I open them, I see a split-second delay between certain lines appearin
-
I am about to deploy a Solaris 10 server for exporting iSCSI shares on an HP DL. Is there any advantage to using HP's provided network driver over the module included? Will it actually perform any better? Thanks!