Activating standard queries from BI content

Hi Guys,
      Can u give me the step by step process to activate standard queries from the BI content with all its related objects.
Thanks in advance...

Hi,
To install Query:
RSA1->Business Content->first choose 'Collection Mode' Start Manual Collection.
Click 'Source System Assignment' button and tick R/3 source system or other source system related (Normally this setup will be done if someone already installed business contents before).
Then left window choose 'Object Type' -> middle window choose 'Query Elements->Query' and double click 'Select Object' -> find the Query you want to install, and click 'Transfer'.
Query will be transferred to right window, click Grouping and choose option 'Only Necessary Objects',
After objects collection is done, click 'Install'-> Install (you can do simulation here, check the help for details).
Thanks & Regards,
SD

Similar Messages

  • Queries from business content

    Hi,
    When we install the out of the box business content queries from business content where are we able to see those queries. ( Like when we install infocube and dataflow before and we will be able to see it all in modeling area, same way where can we see the queries).
    Also when we install the queries will the objects like structures,variables, restricted key figures and calculated figures will also get installed.?
    Thanks for all the help in advance.

    Well the queries will always be attached to an InfoProvider, so you can easily see a list of queries under each InfoProvider. You can see this in the Open Dialog in Bex, or in the BW system you can do this in RSRT. Just F4 on the query text box and lookup up the queries by InfoArea. You can get a whole list of the queries, but then that would mean going to tables and deciphering the query GUIDS.
    Another way is to go to the Metadata Repository and looked at queries within the Local Objects (Activated objects).
    Hope this helps...

  • Error while activating 0FIAR_O03 DSO from Business content

    Hi,
    While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
    Thanks,
    RAJ

    Hi raj,
    The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
    do the following... try to activate the DSO once again ... you will get the message again
    now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
    if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
    Regards
    KP

  • Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

    Hello Friends,
    I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
    My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
    Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
    Could you share some of your rich experience and possible resolution. Thanks for your help.
    Gabeesh Mishra
    [email protected]

    Friends,
    Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
    I am communicating with Basis Team and they are aware of this problem.
    In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
    Thanks,

  • PPPI - Process Management - activating standard settings from SAP

    System data ECC 5.0
    I am trying to use process message category PI_ORDCO. The destination is not assigned. I think the destination should be PI14. PI14 is not listed in the dropdown list.
    My guess is the system does not have the current standard settings from SAP "activated". Please help with activating SAP predefined destinations, characteristics, categories, instructions, etc.
    Thanks.
    (moved by to what I hope is the appropriate forum to get an answer to this)
    Message was edited by: Marilyn Pratt

    Hi
    Please try this ->
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm</b>
    Regards
    - Atul

  • How to find the standard queries in business content

    hi
    pls explain how to find the standard queries in a business content
    assign full points

    Hi,
    Incase you want to know details about the standard queries, then the best source would be the help documenations on BI content:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • How to install cubes and queries from Business content in BI 7

    Hi all,
       Could you please help regarding how to install Info Cubes and Querries from Business content in BI 7.0
         And pl send some OSS notes on BW Statistics in BI 7.0
    Thanks in advance

    And also you can go thru the following link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
    Regards,
    Gattu

  • Activating 0PUR_O01 DSO from Business Content

    Hi,
    Iam looking for more info around How to Activate the BC DSO 0PUR_O01.
    Iam planning on Activating 0PUR_O01(Purchaing Line Items) DSO from the Business Content.
    I read in help.sap that it sources data from 4 different Info Sources
    2LIS_02_ITM: Purchase Order Items
    2LIS_02_SGR: Allocation - Schedule Line with Goods Receipt
    2LIS_02_CGR: Allocation - Confirmation with Goods Receipt
    2LIS_02_SCN: Allocation Schedule Line with Confirmation
    My questions are,
    1.While activating the 2LIS_02_ITM Info Source,some of the objects like 0CM_CDT1 are coming up with a warning that the IO 0CM_HIEID is not added as attribute or Compounded(whil in reality it is present as compounded object)
    2.Do I need to use the 3.5 Data source/Info Source or can I migrate to 7.0?
          If I migrate to 7.0, then How do I convert the update rules & Routines which are collected during the collection of objects for the "Data Flow Before option)"
    3.If I need only data required coming from 2LIS_02_ITM data source, can I simply activate only this Data source& DSO  and keep loading the subset of data from this Data source?
    4.Pls send me any documentation about this DSO/Data sources and How to use them/Activate them etc...
    janjir ATTHERATE OF yahoo.com
    Thanks
    Jagadish

    hi,
    1.While activating the 2LIS_02_ITM Info Source,some of the objects like 0CM_CDT1 are coming up with a warning that the IO 0CM_HIEID is not added as attribute or Compounded(whil in reality it is present as compounded object)
    if the object is found compounded and only warning messege, then u can ignore it
    2.Do I need to use the 3.5 Data source/Info Source or can I migrate to 7.0?
    If I migrate to 7.0, then How do I convert the update rules & Routines which are collected during the collection of objects for the "Data Flow Before option)"
    that depends on ur requirement, at any point of time u can migrate to 7 data flow. but you have to create ur own transformations, u cannot migrate the update rule/transfer rules
    3.If I need only data required coming from 2LIS_02_ITM data source, can I simply activate only this Data source& DSO and keep loading the subset of data from this Data source?
    yes u can
    4.Pls send me any documentation about this DSO/Data sources and How to use them/Activate them etc...
    BI Content
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    All SAP related info
    http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
    Ramesh

  • Error while activating process chains from Business Content

    Hi All,
    I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
    1.Delta Upload : MTTR / MTBR   (0PM_DELTA_P02)
    2.Initialisation  :   MTTR / MTBR  (0PM_INIT_P01 )
    And they are failing with the error
    "Object  0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
    Message no. RS_EXCEPTION280"
    "Message Text
    Object  0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
    Technical Data
    Message type__________ E (Error)
    Message class_________ RS_EXCEPTION (Exception Messages)
    Message number________ 280
    Message variable 1____ 
    Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
    Message variable 3____ 
    Message variable 4____  "
    In the collected objects, these two infopacks are not present also.
    Can you please let me know how to proceed?
    Many Thanks in Advance,
    Vineeth

    Hi
    Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
    Check these links.
    http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
    Chandu.
    Edited by: Chandu on Jan 22, 2009 2:24 PM

  • Queries activated from BI Content not opened in 3.x Bex

    Hi All,
    I am trying to activate standard queries from BI Cont 7.03 and when I am opening in 3.x Bex, it is giving me error.
    It is obvious that 7.0 queries are not editable but there must be some way to achieve this.
    As BI server has been upgraded techincally from 3.5 to 7.0, but still the 3.5 functionalities are being used.
    Please let me know, how to open BI cont queries in 3.x Bex.
    Regards.

    Hi,
    It is not possibe to open BI 3.5 queries in 7.0.
    SAP says it but its not happening anywhere:)
    Just see if you are at highest patch for BW350 and then give it a try.
    Thanks
    Ajeet

  • 0MATERIAL(Info Object) Activation Error from BI Content.

    Hello Experts,
    0Material activation failed..... for below reasons...
    When I am trying to activate 0material from BI Content it is showing errors -
    1. Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding.
    2. Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
    3. Attribute 0CM_CTAR from characteristic 0CM_CDT1 not (actively) available
    4Attribute 0CM_SHAR from characteristic 0CM_CDT1 not (actively) available
    It is having error messages like point 3 & 4 up to 0CM_CDT7.....
    5. Attribute 0CM_CDT1 from characteristic 0RT_SEAROLL not (actively) available
    6. Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
    7. Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
    8. Hierarchy characteristic 0CM_CDT2 of characteristic 0MATERIAL is not active
    9. Hierarchy characteristic 0CM_CDT3 of characteristic 0MATERIAL is not active
    Please suggest me the solution of this error.
    Thanks
    Kshitij D.

    Hi Ashish,
    Thanks for quick reply
    0UNIT_DIM & 0AREA_UNIT is active in BI System.
    But when I am trying to activate the 0CM_CTAR & 0CM_SHAR then is showing following error.
    Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
    Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
    Activation was terminated
    Please suggest for the same.
    Thank you
    Kshitij D.

  • Hiding standard search and standard checkin form from UCM content UI

    Hi ,
    We want to hide standard checkin and standard search from content ui .
    Is this possible ? How do we achieve this?
    From the admin UI we can do this by enabling the component HideStandardCheckinAndSearch component.
    But how do we do it from Content UI?
    Thanks,
    Bharath

    Hi
    It depends on what you're trying to achieve. If your users do not want to see standard check-in option in the displayed user interface then you'll have to customize the ADF UI to do so. Implement some sort of ruling feature to display menus. Link suggested by Jiri is good starting point and standard way to customize ADF UI as per documentation.
    Regarding implementing filter or any customization on server-side can be viewed as 2 different parts
    1. implement profile rule and hide menus - this works for native UI and not content UI. Since content UI is a different EAR deployed on weblogic and page generation is not controlled by CS or any of its configuration parameter.
    2. implement filter or other custom option - this kind of feature will help you to prohibit feature execution; but, user will still be accessible to access the search option. This implementation will be not user-friendly. Once users enter some value we display message that feature is not supported. So this option should be your last resort.

  • Error while activating the infoprovider 0PS_C04 from BI content

    Hi,
    We are trying to activate Infoprovider 0PS_C04 from BI content and getting following error. We have applied OSS Note 493422 and also tried several options by granting appropriate authorizations to the RFC user BID_CUA_200 being used for the extractors.  However, we are still getting following error message. Unfortunately we have been experiencing this problem for most of the Infoobjects
    Kindly throw some light on this please. I will certainly reward full points.
    Best Regards
    Venkat. P
    "Error when creating transfer structure /BIC/CCBA0CURTYPE_TEXT in source system ECDCLNT200
    Message no. R3104
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCBA0CURTYPE_TEXT as an IDoc segment in source system ECDCLNT200 .
    System Response
    The action was terminated. No data was changed.
    Procedure
    Use the generation log in source system ECDCLNT200 to identify the error, and remove the cause.

    And also check whether there are any dumps in ST22.
    Khaja

  • Problem while installing a query from Business Content

    Hi all of you,
    I am trying to install this particular query Inventory Turnover from the cube 0IC_C03 (Material/Stock Movements) from Business Content. Now in the third pane in Business Content under Active version available column across the name of this cube there is a calendar symbol.
    a.     So does it mean that the cube 0IC_C03 (Material/Stock Movements) is installed along with all the objects that are dependent on the cube and all those objects on which the cube is dependent. (NOTE: I had selected the grouping option as “In data flow afterwars”)
    b.     When I collapse Query Element I find that some of the queries are not installed. So I expanded Inventory Turnover query, right clicked on it and selected Install All Below.
    c.     I am getting this error, “Abort system error in program SAPLRRI2 and form LI_SETZEN-01-“ when I execute the query Inventory Turnover. However in Business Content when I installed the report Inventory Turnover under the cube Material Stock/Movement I didn’t get any error anywhere. Everything was activated successfully without any errors.
    Please tell me how do I install this Inventory Turnover from business content and how do I execute this report from BEx.
    Thank you.
    TR.

    Hi Arun,
    Thank you for that quick reply. I want to activate only the query and not the cube. I did as you advise me but still I am getting the same error when I run the Inventory turnover report from BEx.
    I am able to run other reports from the cube IC_C03. But not this report Inventory turnover. I have also checked the cube and there is data in the cube.
    Kindly adivse what to do.
    Thank you.
    TR.

  • Error facing after installing a template from BI Content.

    Hi,
    I installed a web template '0TPL1_SR_GL_DASHBOARD'  from BI Content. In Grouping tab I selected 'only necessary objects' and clicked on Web Template becoz I already have queries activated in BI.
    But While checking that in WAD I could see the template name but Web Items are not dispalying.and an error message
    'Template Include Item TOP_INCLUDE unresolved or empty. Close and reopen template.' is dispalying.
    Need your help in this regard. Please let me know if I missed anything while activating.
    Thank you.

    Hi,
    A default template is designed to be executable with any query or query view.
    Consequently, the data provider definition in these templates contains an empty data provider tag, which is then filled via the URL that provides a query or query view id.
    So, it is natural that a data provider of these templates can neither be found nor instantiated.The behaviour is perfectly fine as it is.
    Please apply the latest SPS and test the issue again.
    https://websmp104.sap-ag.de/patches
    Support Packages and Patches
    SAP NetWeaver
      SAP NETWEAVER
       SAP NETWEAVER 7.0 (2004S)
        Entry by Component
         BI Java
          BI BASE SERVICES 7.00
           #OS independent
           << (check for latest) >>
    and
          BI WEB APPLICATIONS 7.00
           #OS independent
           << (check for latest) >>
    Hope this helps,
    Colum

Maybe you are looking for