Activating the EHP4

I have installed the ERP 6.0 (ECC - abap component) EHP4 ready , now while i am trying to activate the business functions using SOLMAN , the guide says that the system should be under ERP in SMSY instead of ECC , in SOLMAN the EHP4 ready abap system is already under the ECC components ...
How to change the specification or any other tasks are required to be performed.
Regards

Hello,
Please read carefully note 1122966. There is a reference to the procedure to change a system from ECC to ERP in SMSY.
Please note that even a system with ERP 6 as product version in the header data will have an instance called 'ECC server', don't get confused by that. The product version you have to look for is in the 'header data' tab.
Best regards,
Miguel Ariñ

Similar Messages

Switching on the EHP4 functionalities only for Procurement as a part of SRM

Hi Friends,
We are upgrading from 4.6C to ECC 6.0 EHP4, but the EHP4 functionalities are not activated. Further now we are planning to upgrade our SRM system from 5.0 to 7.0. As a part of SRM upgrade we wanted to switch on the EHP4 functionalities only for procurement. My doubt here is Can we activate only Procurement functionalities in EHP4, if yes would it affect the cross function modules.
This is crux for our further discussions, as lot of new functionalities being provided by SAP with ECC EHP4 when we integrate with our SRM system.
Could you please provide me some inputs about the activation of EHP4 Procurement functionalities and side effects for cross functional modules.
I will really appreciate for your quick response.
Thanks and Regards,
Ramesh Kyla

Hi
it is enhance pack. so definetly we do vigorous test whether it affects our existing functionality
even we do very rigorous testing to move one service pact to another service pack.
Definetly testing is required to test whether it affects our existing business functionality of existing business.
yes. since EHP4 - totally different behavior on two main things. You need to study the EHP4 functionality very well
for eg. in PDP scenario , w dont run any req transfer job to transfer PR to SC in the SRM and it automatically happens and it traverse via XI. but SRM 550 ECC 6.0 - we transfer via Batch job no XI required.
in Contarct management :- SRM 700 with EHP4 ECC 6.0 , CONTRACT from SRM to ECC via XI but SRM 550 ,contract comes from SRM to ECC via IDOCs .
so in EHP4 DEFINETLY HAS LOT OF BUSINESS OBJECT LEVEL CHANGES. EXTRA FIELDS IN CONTRACT. FOR EXAMPLE PAYTERM FOR EACH ITEM IN THE NEW CCTR.
many.. you need to study lot... and needs to go further deep study..
br
Muthu

Error while activating the DTP

Dear all,
We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
Error from PSA ****
Message no. RSAODS000
Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
Can experts throw light on this?
Regards,
M.M

Hi Magesh,
Please check the below solution:
you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
Note No: 968504
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
With Regards,
Ravi Kanth

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while activating the request of DSO upload

Hi all,
While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
Is it because no translation exists,if so what should be done for the same.
Thanks in advance,
Chintu.

hi Chintu,
it seems unit BBL not exist in your bw system,
you can update the unit master from r/3,
have you performed 'transfer global setting' ?
check in r/3 table t006a (t006*), if exist you can
rsa1->source system->right click r/3 source system
'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
this update should be scheduled periodic, menu program->run in background and schedule periodic job.
if BBL not exist in r/3, you can manualy maintain,
transaction CUNI.
hope this helps.

Activation the Standard reports for SAP CRM IN BW 3.5 Version

hi guys
I am working on SAP BW 3.5 version
I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5 Business Content
But I don't find the any single Standard Report in BEX.
I followed these Steps ;
BEX - Open - Queries - Info Area
If any One Knows please let me Know, Urgent Requirement
thanks in Advance
Suma

did u try to see that reports in metadata repository
login to bi system
enter RSA1
on the left panel select METADATA REPOSITORY
select LOCAL OBJECTS
then hit Query
TRY TO find ur REPORTS WITH TECHNICAL NAME
if it exists here than u shuld be able to seee in infocube.
if that doesnot make sense
go back to LOCAL OBJECTS SCREEN
hit INFOCUBE
locate ur infocube and select it
now everything with respect to infocube active and available is visible
all char catalog, keyfig catalog, queries etc....

We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now

to
We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now so we can possibly recover our laptop? Any one who can point us in the right direction that would be great and we would be very grateful. Thanks So Much

Lojack for laptops - if that is the product you purchased and installed, you will need to read the user manual or contact the manufacturer as it is 3rd party. You did file a police report right?

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

My ipad mini was stolen and i have activated the find my phone to lock it. how can i get the serial number off my itunes or icloud profile? and what are the chances that the find my iphone app works when someome erases the device?

my ipad mini has been stolen and i have activated the find my iphone to lock. now it is only a wifi device so what are the chances that a person can get hold of it and log onto wifi without the password of my device to unlock. does that not make the app rather less useful as i have to hope that the person is apt enough to log onto the internet but not enough to erase it and start afresh. is it possible to find my device even afte someone has erased it?

"Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
http://www.apple.com/icloud/features/#fmip

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

Error while activating the transformation for cube

Hi everyone,
I m working on BI7, & while activating the transformations the system trrows an error saying that 'amount infoobject is not assained' and 'unit of measure is not used' even though I hav assigned both the fields to Amount infoobject.
would plz explain in detail.
Thank you.

Hi,
Are you loading from the Flat File or from ECC?
If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
Then when you create the Transformation then the Rules will be created Automatically.
Regards,
rik

Error while activating the BSEG table

hi guys ,
today i joined SAP SCN . I have this error
First i appended a structure of 5 fields in BSEG table .Then i tried to delete this append structure.
But while deletiing it took nearly 20-25 minutes to process and timed out.So the structure is deleted
from BSEG table but those 5 fields are still present in view V_QCMBSEG .Because of this BSEG table
is now partially active .what should i do other than access key .

Dear Deepak,
welcome to SCN.
How did you append structure in BSEG without access key, if you had appended you must have done it will access key as it is a standard table.
secondly, the time out error is because BSEG is a cluster table, and the data volume in Bseg is very large as all the accounting document from various module is stored in this table, hence while deleting it system will check each line item wise before activating the table.
Now the workaround is to check with your basis team to increase the memory index so that time out dump is eradicted and BSG becomes Active.
Best practice: Don't append structure to standard table unless it is very crucial. if you are doing it for some report, kindly do a table join ( BSEG cannot be used as it is a cluster), you will get the same data in various secondary index table, by doing this the performance of the report will be better.
Regards,
M S Lokesh

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while activating the copy of the standard module

Hi,
I wanted to create a copy of the module material_read_all and so I copied the entire function group.
Now when I am trying to activate it , I am getting syntax error saying that the field does not exist in the global declarations. When I double click on the field name it takes me to another modules of the same function group where the said field is an export parameter.
I cross checked with the standard module and there also no explicit declaration is given. I also tried declaraing the variable again and then activating.But on doing it I got different results from both the modules for the same input and so I had to delete and create it again.
The same thing is happening with other modules also which I am trying to copy.
Can anyone please help me with this.
For copying the function group I entered the main program name in se38 and clicked on copy. It then asked me to copy the modules so I just added 'Z' before the modules to make a duplicate copy.
It is very very urgent.
Thanks in advance
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 11:50 AM

Hi,
I have tried activating all the includes individually and then the main program. But still I am getting the errors. While activating the includes on checking for the syntax error it showed error but on clicking on activating it got activated. But same thing sis not working for the main program.
I also tried with 'activate anyway' but even after that syntax errors are there with the field decalrations.

Error while Activating the Info Source.

Hi Gurus,
We are in BI7 & SP14.
Here I am Activating the Infosource "0CO_OM_OPA_2" which i already assign the datasource "0CO_OM_OPA_2" to "0OPA_C11"Cube.But i am getting the following error message "Data element for InfoObject KOKRS 0CO_AREA could not be created".
Here the whole flow i am doing in old version(3.5).
Any one can help me to solve this issue.
Thanks
Raju.k

Please check your Infoobject is active or not. Even it is active please reactivate and check once again.

Activating the EHP4

Similar Messages

Maybe you are looking for