Activating the standard information structures

Hi all,
I was trying to check the standard report for customer sales (MC+E).... I have entered many transactions for various customers but when I try to see the standard report the system displays the following message:
"No data exists for chosen selection".
I think I need to activate the structure in customizing but do not know how to do it. Also the system does not show the exact SIS number.
How to get the SIS number & activate it.
With best regards,
Niyaz Sayyed.

Hi niyaz
Go to OMO1 to activate the info structure. Now check in t.code OVRP wheather the combination of sales area , material statistics grp , cust statistics grp , sales document type statistics grp , item category statistics grp with the Update group has been maintained or not .
Now if it is not assigned then assign and then generate the report . you will get the data .
Regards
Srinath

Similar Messages

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

I have activated the standard datasource in r/3? how to identify active?

Hi All,
i have activated the standard datasource in r/3 ? and i have replicated the same in the bw system and in the source system of r/3 i have replicated it and i can find the data source there ? but how to identify whether the datasource is active in the bw system or not ?
i cant see a tick mark on the data source does it determine it is active?
Pls guide me on this?
thanks
Pooja

Hi all,
I am working on 3.5
And where can i find the datasource is green or not? it is not assigned to the source system i can identify it?
i am not able to rightclik on the datasource and see the active version.
When i right click on the data source i can see this option:
1. assign infosource
2. maintain datasource in the source system etc?
Thanks
Pooja

Activation the Standard reports for SAP CRM IN BW 3.5 Version

hi guys
I am working on SAP BW 3.5 version
I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5 Business Content
But I don't find the any single Standard Report in BEX.
I followed these Steps ;
BEX - Open - Queries - Info Area
If any One Knows please let me Know, Urgent Requirement
thanks in Advance
Suma

did u try to see that reports in metadata repository
login to bi system
enter RSA1
on the left panel select METADATA REPOSITORY
select LOCAL OBJECTS
then hit Query
TRY TO find ur REPORTS WITH TECHNICAL NAME
if it exists here than u shuld be able to seee in infocube.
if that doesnot make sense
go back to LOCAL OBJECTS SCREEN
hit INFOCUBE
locate ur infocube and select it
now everything with respect to infocube active and available is visible
all char catalog, keyfig catalog, queries etc....

Activating the standard transport system in BI Dev system.

Hello All,
We have a debate going on like whether we need to activate the standard transport system or not in BW Development.
Our user is asking to enable some functionality from a Web Template using the
Save As command. This command enables a user to slice a report and
then save this view as a Portal Favorite. This functionality appears to be
blocked when the transport system is active(Switched on) but he is able to save it when transport system is switched off.
I know that it has to be switched on in order to collect the changes in transport requests in Dev other wise will be collected as Local obects in $TMP.
Also let me know the pros and crons of activating the transport system.
Appreciate if you could throw some light on this and solution to the above problem.
Regards,
Hari

Hi,
It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
Thanks,
Swapna Priya.

Restricting the user options in the sales information system

Hi,
We use user information system for sales managers. We use T-code MCSI and the we choose customized information system S904.
Our goal is to restrict the options of each sales manager because we want that the sales manager only have access to his own information.
We try with the Parameter_ID VKB (sales office) but in this case the field is previosly filled but the sales manager can change it.
We use Authorization Data also but the sales manage still also can access to the sales of the others sales manegers.
How can i solve it?
Best Regards
João Fernandes

hi.
Please find the answer below :
"In addition to the type of update, you can also define the period unit to be used in the updating
process.
The period unit specifies the intervals in which the statistical data is to be cumulated. You can
choose from the following periods:
Day
Week
Month
Posting period (you may also need to specify a fiscal year variant)
You can determine the period unit of the update for every standard information structure.
In the SAP standard system, the default period unit for updating all the information structures in
the Sales Information System is month."
Hope this will help you .
Regards,
Krishna O

How to find out the standard info stucture for a customized IS in LIS

Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
Saddy

Hi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy

How to change the standard purchase order ???

Hi,
i am trying to change the output form of standard purchase order.for that i copied the standard script/form to my own created script/smart form.i modified it as per user requirement and i have given the same name in NACE>EF>output type>NEU>processing routine..in place of the standard one.and i have also activated the standard program i.e. SAPFM06P.but when i am going to me22n and print preview the previous form format is coming...
if i will create my own smartform then it is difficult for mapping all the fields to me22n...user can not input other fields in me21n if i am giving my print program name in NACE...
can anybody please help me...????
pls reply soon,....
Regards
Amayika

Hi,
Are you sure you have set it for medium 1 (print output) and specify the program, FORM routine, and the Form/Script correctly?
Another reason is the output type is not set up yet at the PO. Go to ME22N and click Messages button (next to Print preview button) and check whether your output type is already there. If it is not, then create one.
Please also check that you have copy client the form/script from development client to test client (SAPScript need this but no need for Smartform) using T-Code SCC1. And the config is configured properly in test client.
Regards,
Teddy

OCI Punchout - Standard Call Structure - Creates new session each request

Hello all,
I am having trouble with a customer attempting to do OCI Punchout with the Standard Call Structure. I have other customers successfully punching out in this same system. Here is a breakdown of what is happening. Our catalog is a combination of classic ASP with VB6 Com objects
1 - The user POSTs their call structure to our /ocilogin.asp page and we set a session variable after successfully log in
2 - The user is then redirected to our /MainFrameLoad.asp page which houses our catalog.
3 - The problem occurs here because the Session_OnStart method in the global.asa file is called again, which should not happen because session has already been established. The logic in this method checks for the session variable created in /ocilogin.asp but it does not exist.
4 - It looks for a username/password via querystring and does another login, which then redirects them again to /MainFrameLoad.asp and the infinite loop begins.
I'm convinced that their system is creating new unique requests each time which is causing the session variable to disappear. I've tested their ability to accept cookies, which would also effect session variables, but that seems to be fine on their end.
My question is how can I tell if their system is properly handling cookies/requests? I have plenty of example of people punching out with the exact same call structure, but its just their system that seems to have the issue.

Hi,
SRM 7.0 catalog integration differs from previous releases, the reliance on OCI 4.0 compliance is much stricter, please see the note [1287412 |https://service.sap.com/sap/support/notes/1287412]for more details on the required settings in the SRM system, perhaps let your customer also know about this note.
Regards,
Jason

Standard Extract Structure Data to SAPXI

Hi
I am looking for some possibility where standard extract structures can be used from R/3 system and they can directly transfer the data to SAP XI system in some way or the another.
This means unlike you replicate the data source in BW System and transfer the data there, I wish to utilize the already present standard extract structure which is delta enabled to transfer (Master Data/ Transaction data to SAP XI) system.
I know there are standard Idoc/RFC and also proxy is a way, but wish to know if we can the standard extract structure to pass data to SAPXI.
Best Regards
Paresh

Hi:
The extract structures and the S-API technology in place for transferring data to BI are different from EAI technology. Essentially, the extract structures required extraction, a job to read the data and transfer it; XI expects an inbound message. Thus, you need an "extractor. So to answer your question directly, "no", a direct technique to accomplish a direct R/3 - data exchange that is delta enabled and uses the existing extract structures is not readily available.
Your best bet in this scenario is to utilize the ETL (extraction transformation and load) technology that is already available with your BI system and the S-API, as an intermediary.
The following paper should be quite helpful for you:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
Thanks for any points you choose to assign.
Best Regards -

Delete the standard workflow version .

Hi Experts,
How can we delete the workflow versions created after activating the standard workflow .
Or you can say how can we bring it to the same state as if should be in the fresh R/3 system .
thanks in advance,
Naval Bhatt

Hi please refer to this thead .
actually i am trying to replicate the workflow , but i think cause i have already saved and activated it thats why its not getting replicated thats why i want to delted the workflow versions .
please tell me if you know any way to delete it .
Standard workflow not visible
thanks ,
Naval Bhatt

Archive Information Structure purging

Hi All,
We have a requirement to automate the Archive Information Structure (AIS) purging.
Currently its been done manually from the transaction SARI.
The Suggested solution involves recording (SHDB) the above manual process and write a Call Transaction program for purging multiple info structure.
Are there any alternatives for purging AIS other than using recorded SARI transaction?
Can this be accomplished by calling some function modules?
Thanks & Regards,
Abhijith P.K

hi,
Thank you so much,that's just what I want,however the transaction may be MCSX.
Lance

Package Check Error while activating the Appended Structure

Hi CRM Gurus,
A structure is appended to a standard structure. while activating the appended structure its throwing Error called-
<b>Package Check for Table/Structure ZCDPR_BW_BUPA_LINKS</b> .
<b>The object TABL ZCDPR_BW_BUPA_LINKS uses SQLT DPR_BW_BUPA_LINKS</b>.
plz help me to get the solution in this regard.
Regards,
Gokila

Hi
   were you able to solve your problem?
   If so please update us. We are also facing same issue while activating the table.
   let us know the solution if you have solved the problem that will help us a lot.
Thanks and regards,
Amit

Information structure SAP_DRB_MM_EKKO: the index ID '' is not permitted

Hi,
When i'm activating archive infostructure "SAP_DRB_MM_EKKO".I'm getting the following error
Information structure SAP_DRB_MM_EKKO: the index ID '' is not permitted
Please can anyone give solution for this.
Regards
Subhash

see OSS note 1111785 - Wrong variant/index in archiving customizing

QM , Working with Information structure and standard Analyses

I have created a Information structure S950 copying Information Structure S068.I have fews issues in the newly crerated information structure.
1) When I generated standard analyses and assigned the transaction code for it.
The descrption present in the transaction code is not shown on the selection
screen. Can anyone let me know how do Change the description on selection
screen of the standard analyses. Or how do we create "Analysis" for Standard
Analyses.
2) When I run the MCVA transaction (Standard Anaylses for Vendor - Info structure S068) I can see few Rate fields being caculated .Ex: Rejection rate . This fields are not stored phisically in the S068 but coming dynamically. I want the same fields in my transaction as it is the copy of S068. I believe this calculation are made in Supplementary Key figures. Can anyone let me know where is this supplementray key figure OR how do we set the supplemetary key figure in Custom information Structure.
I will really appreciate if any one could help me on this.

I have created a Information structure S950 copying Information Structure S068.I have fews issues in the newly crerated information structure.
1) When I generated standard analyses and assigned the transaction code for it.
The descrption present in the transaction code is not shown on the selection
screen. Can anyone let me know how do Change the description on selection
screen of the standard analyses. Or how do we create "Analysis" for Standard
Analyses.
2) When I run the MCVA transaction (Standard Anaylses for Vendor - Info structure S068) I can see few Rate fields being caculated .Ex: Rejection rate . This fields are not stored phisically in the S068 but coming dynamically. I want the same fields in my transaction as it is the copy of S068. I believe this calculation are made in Supplementary Key figures. Can anyone let me know where is this supplementray key figure OR how do we set the supplemetary key figure in Custom information Structure.
I will really appreciate if any one could help me on this.

Activating the standard information structures

Similar Messages

Maybe you are looking for