Activating the standard transport system in BI Dev system.

Hello All,
We have a debate going on like whether we need to activate the standard transport system or not in BW Development.
Our user is asking to enable some functionality from a Web Template using the
Save As command. This command enables a user to slice a report and
then save this view as a Portal Favorite. This functionality appears to be
blocked when the transport system is active(Switched on) but he is able to save it when transport system is switched off.
I know that it has to be switched on in order to collect the changes in transport requests in Dev other wise will be collected as Local obects in $TMP.
Also let me know the pros and crons of activating the transport system.
Appreciate if you could throw some light on this and solution to the above problem.
Regards,
Hari

Hi,
It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
Thanks,
Swapna Priya.

Similar Messages

Error in Query View Saving -The standard transport system is active.You can

Hi,
I have a query in Dev system which is moved to production and i am able to edit the query in dev.But my problem is when i tried to create a view on that query and save the view, it is throwing me a error
"The standard transport system is active.You cannot save"
Any pointers on this.
Regards,
Pra

Hi
Did you get any feedback on this one?? Im facing the same message when saving a query view..
Thanks
Willem

Error in Portal: The Standard transport system is active.You cannot save

Hi Experts
In Portal,I am trying to save a BW Query as view in 'Favorites' or 'BEx Portfolio' or 'My Portfolio',I can't able to save it as i am getting
"The Standard transport system is active.You cannot save" msg
Please update me what is the reason and how to resolve this error
Thanks in advance

Hi,
SAP Note : 356018 might be handy.
Regards,
Sandeep Tudumu

The standard transport system is active. BI querry on Poral

Hi All,
I am getting the error when saving the querry in BI ie when I click "Save As" button a dialog window opens and in "favourite" tab
i give description (any text ) and click Ok button. Then i get the following error :
The standard transport system is activeYou cannot save
This is carried out in portal.
Please help
Regards

Hi,
It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
Thanks,
Swapna Priya.

Transport an Query without the standard transport system

Hello Experts,
is there a function (similar to the report-painter-reports) to transport a query via pc to an other system?

Jurgen,
As pointed out , it is not possible to transport from production to another system without using the transports , however the query would be under a request in production , you could then use that request to transport the query into another system either by specifying a transport connection or manually importing the data and co files...
Arun
Hope it helps...

Warning "Standard Transport System is Active"

I have just installed the 710 GUI patch 11 and the 801 patch on the BI 7 tools. When I run the Report Designer or Web Application Designer against our development BI system, I get the following warning: "Standard Transport System is Active. SAP GUI connection is not activated for current connection to BI system. Do you want to reconnect to BI system and activate SAP GUI connection?" A connection dialog box appears and I put my credentials in and am connected.
Does anyone know why this warning appears on on certain systems and with certain tools? For example, I do not receive this warning running these tools against our QA BI system. How can I "fix" it so it no longer requires a second log in? I thought it was in the config on the BI side but my BI guy says "no, it's a GUI issue".
Thank you!
Jodi

Bex Pop up message - Standart transport system active - how to supress
Regards.

I have activated the standard datasource in r/3? how to identify active?

Hi All,
i have activated the standard datasource in r/3 ? and i have replicated the same in the bw system and in the source system of r/3 i have replicated it and i can find the data source there ? but how to identify whether the datasource is active in the bw system or not ?
i cant see a tick mark on the data source does it determine it is active?
Pls guide me on this?
thanks
Pooja

Hi all,
I am working on 3.5
And where can i find the datasource is green or not? it is not assigned to the source system i can identify it?
i am not able to rightclik on the datasource and see the active version.
When i right click on the data source i can see this option:
1. assign infosource
2. maintain datasource in the source system etc?
Thanks
Pooja

Can any bady send me the standard transportation (configuration) doc.

Please send me the standard transportation configuration step by step doc.

Hi Goutam,
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Logistics  Logistic Execution  Transportation Transportation Planning  Create  Single document
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Logistics  Logistic Execution  Transportation Shipment cost  Create  Single document
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select hte line item and double click it.
Go as main menu: Itme --> Acc. assignment, You enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Reward points if it helpful
Regards
Govind.

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Activation the Standard reports for SAP CRM IN BW 3.5 Version

hi guys
I am working on SAP BW 3.5 version
I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5 Business Content
But I don't find the any single Standard Report in BEX.
I followed these Steps ;
BEX - Open - Queries - Info Area
If any One Knows please let me Know, Urgent Requirement
thanks in Advance
Suma

did u try to see that reports in metadata repository
login to bi system
enter RSA1
on the left panel select METADATA REPOSITORY
select LOCAL OBJECTS
then hit Query
TRY TO find ur REPORTS WITH TECHNICAL NAME
if it exists here than u shuld be able to seee in infocube.
if that doesnot make sense
go back to LOCAL OBJECTS SCREEN
hit INFOCUBE
locate ur infocube and select it
now everything with respect to infocube active and available is visible
all char catalog, keyfig catalog, queries etc....

Activating the standard information structures

Hi all,
I was trying to check the standard report for customer sales (MC+E).... I have entered many transactions for various customers but when I try to see the standard report the system displays the following message:
"No data exists for chosen selection".
I think I need to activate the structure in customizing but do not know how to do it. Also the system does not show the exact SIS number.
How to get the SIS number & activate it.
With best regards,
Niyaz Sayyed.

Hi niyaz
Go to OMO1 to activate the info structure. Now check in t.code OVRP wheather the combination of sales area , material statistics grp , cust statistics grp , sales document type statistics grp , item category statistics grp with the Update group has been maintained or not .
Now if it is not assigned then assign and then generate the report . you will get the data .
Regards
Srinath

No request has been set up as the standard transport request for BEx object

Hi gurus,
I have this error in a query . Have someone any ideea what is this?
Thanks,
Ramona

Hi,
Before you create a query you have to assign a global request to Bex application.
To do this goto Transport connection of RSA1, In the tool bar you will see a icon Bex (Create transport request for Bex). Assign a request for it. After doin so, you error will be resolved.
-- Selva

BW standard transport

Hi,
Which is better... standard transport switched off in BW or switched on? If it is switched off how will we move the work done in one environment to another? Could someone help me what is the main use... so that i can understand this.
~rahul

Hi Rahul,
Using the standard transport system in a BW system is a little problematic, or in SAP words: "The standard transport system doesn't take into account specific BW functionality". This means that due to locking problems, you won't be able to save (and change) different queries in different change requests if they use the same calculated/restricted key figure for example.
I'm not familiar with the option that Mike mentioned ('at this point you have the option to enter a transport request or skip it'). We use BW 30B and if I'll choose to skip the step that saves the changes in a change request I'll loose all the changes (there's no $TMP or Bex transport option).
So, as I see it, you don't really have the option to use the 'standard' method (for BW <=30B) since it does not work for BW objects.
btw, if anyone knows I'm wrong or knows that the problem solved as of NW4, I'll be more than happy to hear since we could really use this method.
Shiri

Delete the standard workflow version .

Hi Experts,
How can we delete the workflow versions created after activating the standard workflow .
Or you can say how can we bring it to the same state as if should be in the fresh R/3 system .
thanks in advance,
Naval Bhatt

Hi please refer to this thead .
actually i am trying to replicate the workflow , but i think cause i have already saved and activated it thats why its not getting replicated thats why i want to delted the workflow versions .
please tell me if you know any way to delete it .
Standard workflow not visible
thanks ,
Naval Bhatt

How to change the standard purchase order ???

Hi,
i am trying to change the output form of standard purchase order.for that i copied the standard script/form to my own created script/smart form.i modified it as per user requirement and i have given the same name in NACE>EF>output type>NEU>processing routine..in place of the standard one.and i have also activated the standard program i.e. SAPFM06P.but when i am going to me22n and print preview the previous form format is coming...
if i will create my own smartform then it is difficult for mapping all the fields to me22n...user can not input other fields in me21n if i am giving my print program name in NACE...
can anybody please help me...????
pls reply soon,....
Regards
Amayika

Hi,
Are you sure you have set it for medium 1 (print output) and specify the program, FORM routine, and the Form/Script correctly?
Another reason is the output type is not set up yet at the PO. Go to ME22N and click Messages button (next to Print preview button) and check whether your output type is already there. If it is not, then create one.
Please also check that you have copy client the form/script from development client to test client (SAPScript need this but no need for Smartform) using T-Code SCC1. And the config is configured properly in test client.
Regards,
Teddy

Activating the standard transport system in BI Dev system.

Similar Messages

Maybe you are looking for