Activating two or more inspection types to a raw material

Hi Gurus
In this scenario how these three inspection types will work.
Scenario:
For a raw material i am assigning three inspection types 01(Goods Receipt Inspection For Purchase Order),02(Goods Issuse Inspection Inspection) and 08(Stock Transfer Inspection) and i am activating the three inspection types. So, i want to know who these inspection types will trigger.
When i was trying 01 is working and after that when i was issuing material to production material is not going to quality stock. So, Please can you brief me how inspection types will trigger one after one.
Thanks in advance
Regards
SURESH.M

Hello Suresh,
There is some special rules when using this inspection type 01.
You can find these rules here:
http://help.sap.com/erp2005_ehp_06/helpdata/en/2d/351a26448c11d189420000e829fbbd/content.htm?frameset=/en/be/00bbd8ca5311d2961800a0c930e04c/frameset.htm&current_toc=/en/89/9bb43418e43b4ae10000009b38f83b/plain.htm&node_id=9
BR,
Natália

Similar Messages

Setting Inspection Type value automatically during material creation

Hi Experts,
I want to set the Inspection Type field ( MM01/MM02->Quality view ->inspection set up ) value depending upon plant .
Lets say for plant 0100 Inspection Type- GR100
for plant 0110 Inspection Type - GR110
Can this be done through SPRO or if we need to implement it through User exits/ badi .
Thanks in advance

Hi,
I guess defaulting is not possible. Copy the existing material and create a new one so that the inspection type is also copied.
Check the link
http://forums.sdn.sap.com/thread.jspa?messageID=9803039#9803039
Regards
Ayyallas
Edited by: ayyallas on Feb 22, 2012 12:51 PM

How MRP Run exclude QI Stock Type of a Raw Material SLOC?

Dear all
Fact:
All of our raw materials must be subject to quarantinee upon GR. We have Storage Location of Raw Material: RMSL
In Material Master of that Raw Material
We are using the "SLOC of EP" (MRP View 2) to put the defaulted GR SLOC. And we also make use of the "Post to QI Stock" in View: Purchasing.
Upon GR:
During GR, the Raw Mat SLOC (RMSL) will be copied from "SLOC of EP" of the material master data, and it will be posted to the stock type "QI STOCK".
Problem:
However, when the MRP Controller run MRP, it will take the QI Stock Type of Raw Material SLOC into account.
Is there anyway we can exclude the QI Stock Type of Raw Material SLOC from MRP Run?
I have read from some threads to suggest to post it to the Quarantinee SLOC. We prefer not to create another Quarantinee SLOC (QISL) which will be filled in SLOC of EP and then after passing QC, we perform Transfer Posting from SLOC: QISL to SLOC: RMSL. We have a few Raw Material SLOCS and we do not want the Warehouse guy to get confused which Raw MAterial SLOC to choose upon GR. Rather, we prefer it to be defaulted in the "SLOC of EP" in the material master.
Please advise.
Edited by: Daimos on Jul 13, 2009 1:16 PM

Hi,
Generally MRP consider stock from all the storage location when run the MRP for Plant level for material.
However we can exclude the particular storage location from MRP Run, for those following settings to be done.
Go to MRP-2 View of material master and select the storage location to be excluded from MRP. (Press Shift +f1 ex .sloc2) As per your case it should be RMSL
In that MRP view go to Storage location MRP Tab.
And assign u201CSLoc MRP indicator = 1 (Storage location stock excluded from MRP)u201Dand save.
Now run the MRP, stock from sloc2 will not be considered to create-planned order.
Please try this and revert back.
Cheers,
Kumar.S

Mass creation of Inspection types

Dear QM gurus
How to create the inspection types in mass processing?
For example I have to assigne inspection type 05 for 100(with activation of Inspection Type indicator) materials (the material masters are already created )
is there any method?Without using BDC or LSMW can i do it by MASS or MM17?
Thanks
MK

There is std T code available for activation of Inspection type in SAP-QM
Use T code QA08
Enter Material & plant and Inspection type with mass processing.
Regards
Sujit

Inspection lot for inspection type 08

Hi Eperts,
Please tell me following:
Inspection lot does not create when transfer material from plant to plant.
Created STO PO in plant 1000. Issueing plant is 2000.
MMR maintained in both plant with inspection type 01,08 activated in both plant.
As per me system should create inspection lot after GRN takes place against STO PO in plant 1000.
What could be problem.
Regards,
Raja

Hi Raja,
In your previous posts you referred to performing a 101 movement to try get an inspection lot of type 08, this is incorrect.
For movement type 101 you need to activate inspection type 01 and place a block on the q-info record against the vendor in order to get an inspection lot of type 01.
In your scenario, you are wanting an inspection lot of type 08. This is an internal stock movement and wont work with a 101 movement as this is for incoming stock. You should activate inspection type 08 on the material master and use a movement type such as the 322 to move stock to quality inspection. This will create an automatic inspection lot of type 08 as long as you have set QM not active = ' ' for mvt type 322 under SPRO -> Quality Management -> Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements -> deactivate quality inspection for a movement type.
Regards,
Roderick

2 inspection types

Hi, we want two inspections at the same stage of reciving / manufacturing, say, during receiving we want one inspection by our internal team and another inspection by third party. i have enetred 01 in qm view of mat master. while enetring secone time (01), it is giving the meassage that insp type is already exists. pls advise how to handle this.

You can not activate same inspection type twice in a material master.
also remeber you can not create two lots for same inspection type.
Here you have to use either different inspection type or manual lot with same inspection type 01.
1.One solution cen be use 103-105 mvt types.
during 103 you can create a manual lot of 01.(by internal team)
then do 105 which will trigger 01 inspection lot Automatically.(External team/third party)
2.Use 101 mvt type.01 inspec lot will create( .(by internal team).Post this to say X storage location.
Now activate 08 inspection type for material.Using MB1B -->311 mvt type move material from X to Y storage Location.
08 inspection lot will be created.(External team/third party)
Regards
Sujit

Inspection Type and Inspection Setup

i want to check whether the inspection setup is active or not..and also whether inspection type is active or not.. if it is active than for which inspection type it is active...
for all my plants
please can any one tell me the solution
thanks in advance
Edited by: ravi@mm on Mar 2, 2012 7:25 AM

TQ30 table is the configuration table for the inspection types. It will not show material level data.
Use SE16 and look at the QMAT table.
You can use SQVI to generate a report from this table if needed on a regular basis.
If there is a check in field QMAT-AKTIV the inspection it active.
FF

Inspection type 08 restricted by SLoc

Hi All,
I have a scenario in which various Storage locations like A B C D are dedined in plant X.
Now the user wants the inspection to happen only when the goods are transfered from any SLoc to SLoc A while for any other stock transfer, no quality inspection should as the QA department is only present at SLoc A.
Now if i activate inspection type 08 for a material,it will be inspected at all stock tranfers within that plant.Is it possible to restrict inspection by SLoc?
Pls guide

Go to
SPRO - QM - Quality inspection - inspection lot creation - insp. for goods movements
here u select "Deactivate Quality Inspection for a Movement Type"
Now deactivate quality insp. for all the unwanted movement types
here u activate the inspection only for the mov. type 311with respective settings
hope this will help
Regards
sandip

Update inspection type in material master

Dear Experts,
Can anybody please tell me how I can activate inspection type 09 in all material master for all plant in one shot.
And how I can extend material to another plant in one shot. e.g We have 450 material created for plant 1000 & now we want to extend all that material for plant 1200.
Regards,
Raja

Can anybody please tell me how I can activate inspection type 09 in all material master for all plant in one shot.
use QA08, which is spcific designed as mass maintenance transaction for this purpose
Edited by: Jürgen L. on Aug 2, 2010 11:26 AM

How to delete inspection type assigned in material on mass level

Hi Team,
How to delete inspection type assigned in material on mass level. This inspection type is assigned in material master with indicator set as"Task List", however we are using "material specification". This inspection type is assigned to material type using t-code QA08.
I can deactivate this inspection type using QA08, but I want to delete this record from material master first. So that it would adopt my config. next time when I will assign again insp.type in QA08. I have set this indicator in config. of insp. type as default to "material specification".
Pls suggest me solution to delete this insp. type record from material master.
Thanks

hi
if Material speciiication and task lists are checked -- then no need to do anything,
but only task list checked and u want to do based on mat.spec -- then you need to deactivate and reassign same inspection type using QA08.
no other way, ensure ur stocks are not in QI
thanks
Sami

Inspection Type for Material

Hi
I want to know wt are all Inspection types are created for Material...
Can any body help me wt is the Table name to get Inspection type Details?
Regards
Smitha

check this Link: [Link|http://forum.saptechies.com/viewtopic.php?t=1973]

Quality Inspection not cominf for a material code

Hi!
              For a particular material code,already there a quality view in material master.but it is not coming for inspection in QA32.what i have to proceed further for bringing the material for quality inspection?
-M.Suba

Hi Suba,
Try this.
1.     Go to MM02
2.     Put material code and press enter
3.     Go to QM view
4.     Click on Insp.setup. (It looks like solid rectangular tab)
5.     Assign inspection type 01 if the material comes from vendor, else 04 for final inspection.
6.     Ensure that you tick on u201CActiveu201D checkbox.
7.     Save
Do fresh GR. System will generate lot this time.
Regards,
Anand Rao

REg raw material inspection.

Hai experts,
In raw material inspection, we are getting raw material from vendor.we cant able to check 100%.So invoice will be cleared.
We cant able to use immediately.
If I use after two months,IT seems 5% will be rejected in producion line (raw material).
How to retrun these material with respect to vendor.
How the payment will react..
Regards
bhuvan

hI
we cant able to check 100%.So invoice will be cleared.
We cant able to use immediately.
As per my suggestion.
Either You have design payment system( payment term in PO) like payment will not happen immediately at least 2 months.
or
Do 100 % inspection during Inspection lot creation & usage decision.Then do 122 mvt from UD screen.Also in Qm view use Control key as "Invoice block"
I hope this suggestion will add some value.
Regards'
Sujit

Reg raw material & line inspection

Hai experts,
In raw material inspection, we are getting raw material from vendor.we cant able to check 100%.So invoice will be cleared.
We cant able to use immediately.
If I use after two months,IT seems 5% will be rejected in producion line (raw material).
How to retrun these material with respect to vendor.
How the payment will react..
Regards
bhuvan

Hi,
This is some what common scenario in most of industries, for that process is like that
production person transfers the rejected material back to store with 311 movt and store or purchase person returns back that material to vendor with 122 movt.
In case of payment already cleared to vendor u have issue debit note with finance department.
Regrads,
Shekhar

Inspection type for STO with delivery and billing , two step procedure

Dear All,
We've STO scenario between two company codes, plant '1000' of company code '1000' supplies goods to plant '2000' of company code '2000' using STO. We'd like to evaluate the supplying plant for vendor evalution with respect to receiving plant,
Please suggest , which inspection type '01' or '08' needs to be activated in the material master in receiving plant '2000' in order to consider the supplying plant ' 1000' for vendor evalution. and kindly let know me that whether the functionalities of QM procurement (Checking receipt of certificate while posting MIGO) can be used in STO scenario similar to normal procurement scenarios,
Here, we are going for STO scenario of two step procedure with outbound delivery & billing.
Thanks & regards,
rajesh

The inspection type '08' is used for stock transfer order process.
In SAP standard you can't evaluate the supplying plant but external vendor only.
Also the functionalities of QM procurement can influece or control it when materials are procured from external suppliers.
If you want to use the functionalities of vendor evaluation and QM procurement, I would suggest you implement normal procurement process, not stock transfer process.
Regards
Luke

Activating two or more inspection types to a raw material

Similar Messages

Maybe you are looking for