Activating Yard Management

Hi,
We need to activate Yard Management in our ECC 6.0 system.
There is no option to do it in SFW5...do we need to activate some BC sets to get the relevant nodes in SPRO?
Please help...
Thanks,
Saba.

Hi,
Thanks for your input.Had already suggested the same but we were not able to process because of audit requirements. More over these Goods receipts are as old as early 2007 .
Thanks
Ajay

Similar Messages

Yard Management and Handling Unit Management

I am configuring yard Management in ECC6.0 for a LSP business. Ecc 6.0 is standard and not LSP sepcific industry.
Requirement is :
Track the Container once unloaded at the Port with its content - This I have mapped as HU management.
Recieve the Container at the Freight Forwarder (FF) Whse and perform Check In activity. .
Ability to issue Gate Pass once vehicle arrives at the ,FF whse.
Keep track of inventory of Containers by Shipping Line.
Recieve Empty containers from Shipping line.
Know the container as to how long it has been at the FF Whse to bill the Shiping line for Storage charges of the Container.
Solution concept:
I am thinking that this will be used with HU management and Yard Management. Only doubt I have is that whether Yard Management will track my Containers or Not. The Gate Pass Issued by Yard Management is for the Vehicle and not the Container.
Any inputs will be highly appreciated
Thanks
Raj

Hi Rajeev,
Thanks for the Answer. yes, I need reports to Track the Container by Freight Forwarder ie if a Container belongs to P&O Nedlyod shipping line then I should get the details of teh same . Also Empty Container comes in and then its loaded with Outbound delivery. I am putting the container number in the Container field when we do the check in and putting the forwarding agent as the respective shipping line that way I will know how many container of different size of Forwarder is in my Yard.
Also client wants a way to create a Container Master ie The shipping line gives a list of Empty containers which are lying at the Port. Only when the client needs the containers , he will ask for the same with the shipping line.Not sure is there any standard way of handling this in Yard Management. I am more inclined to make a Z Table to store this data.
Also in the process once I have the container in the Yard , I need to stuff this container with Deliveries. I am planning to Pack the Delivery goods on a Pallet and then Pack this Pallet on to the Conatiner. I am doing this via VL02n transaction . I was somehow unable to locate the Container by Conainer ID when I need to stuff the same in VL02N. Maybe I am missing something or is the data not available? If not , then I plan to get the same by means of some user exit on the HU side ie Check for a HU which is Empty and has the type 20 feet or 40 feet as the case may be and show a Pop up of the same and let user select the COntainer in which he needs to pack the Pallets.
Any pointers will be highly appreciated.
Regards
Rajendra

WM cross docking and yard management

Dear Gurus,
Any body here could explain me step by step configaration of WM--Cross docking and Yard Management.
Any help will be rewarded.
Regards,
SAP.

Hi,
hum, this is a bit huge to reply.
Yard is working as cross-docking with a single WM.
Cross-dock needs :
A WM configured
WM movement types to be dedicated
More tricky, it needs to have the Goods receipt sequence to be modified. The goods receipt must be setup to be done before the TO gets created
Yard is more straight forward.
Yard site related to WM
Define the Yard map: The doors, parking spaces... (nota: Maintain the yard doors from the WM customizing. It is a WM location before all.)
some vehicles (Material group, ...)
Some master data. The trucks, the trailers...
To keep in mind:
a truck is an handling unit.
The relation between a delivery and a truck is done with handling units.
The relation between CD and Yard: At CD Decision time, a Yard scheduling activity will be created. Therefore a WM door will booked.
Hope this provides a starting point to you
BR
Alain

Re: WM cross docking and yard management

Is there a way to stop automatic scheduling in Yard Management.
Can someone explain how you can schedule a vehicle without first check-in in Yard management.

Hi,
hum, this is a bit huge to reply.
Yard is working as cross-docking with a single WM.
Cross-dock needs :
A WM configured
WM movement types to be dedicated
More tricky, it needs to have the Goods receipt sequence to be modified. The goods receipt must be setup to be done before the TO gets created
Yard is more straight forward.
Yard site related to WM
Define the Yard map: The doors, parking spaces... (nota: Maintain the yard doors from the WM customizing. It is a WM location before all.)
some vehicles (Material group, ...)
Some master data. The trucks, the trailers...
To keep in mind:
a truck is an handling unit.
The relation between a delivery and a truck is done with handling units.
The relation between CD and Yard: At CD Decision time, a Yard scheduling activity will be created. Therefore a WM door will booked.
Hope this provides a starting point to you
BR
Alain

Yard management:: error when scheduling a vehicle TSTR_SHIFTS_LOG_NO_BREAKS

Hi,
When trying to schedule a vehicle in yard management I get the error message : Generation error in TSTR_SHIFTS_LOG_NO_BREAKS
Message no. T9506
Diagnosis
An error has occurred in the generation program for the time stream
Does anyone know what causes this error?
Thanks a lot,
Joris

Hi Joris,
The factory calendar is passed from the ERP to the APO system during
ATP check.
In your system, please do the following:Goto SPRO transaction.
Goto the menu: General settings->Maintain calendar.
Open the calendar '01' for example. Here you can see that the calendar is maintained
until 2010 only. Can you pelase extend this calendar into the future
and the error will not occur.
Hope this helps
Ramana

Error in Interfacing Project Invoices to AR - No Active Project Manager

I am getting an error while transferring a projects invoice to AR.
I am running concurrent program 'PRC: Interface Invoices to Receivables' program from a responsibility that was created as per the client project security requirements.
The output gives an error message - 'No Active Project Manager Found'.
Note:
- The project manager is active on the project.
- The person record of the project manager is active with an active HR assignment.
- The project manager role is not end dated.
When I run this same program from the standard Project Implementation Super User responsibility for the same project, the invoice gets interfaced to Receivables without any error.
Why does this happen ?
Is this concurrent program dependent on any menu / function / profile option ? If so, which one ?
Regards,
Prakash

Hi Prakesh,
Were you able to generate Invoice and AR Invoice Number in PJB?
Try run Oracle Projects Invoice Data Collection Test n Oracle Projects (PA): Security Health Check
check.
Regards
Raghavender K

Active Ingredient management error in valuation

Dear gurus,
We have a business process involving active ingredient management system, the process is as follows.
1, PO creation
2, GR against PO with automatic batch creation in Migo (with out entering characteristics)
3, Material After tested the characteristic values for the batch are updated in MSC2N.
4, MIRO for PO
Now my problem is lets say i have maintained in Proportion/Product Unit tab "Plan value " for a characteristic as 95.
We have batch wise split valuation and payment processed according to this batch. In PO we have maintained a OPU same as that of the characteristic.
Since we are not maintaining any characteristic value in GRN the Qty in PO price unit in MIgo doc is updated according to the Plan value in material master which makes MIRO value to calculate wrongly.
Please advice to solve this issue
Regards

Hai,
The problem is if i enter the Characteristic value in migo then all the calculations are coming correct. But our business process requires to enter the characteristic value in MSC2N because of which calculations are incorrect.
Regards

Cashflow statement with out activating cash management

Dear Friends,
With out activating CASH MANAGEMENT how to get cash flow statement, please suggest me how to define and get cash flow statement with some example and transaction codes. In my project there is no cash management active. My client is asking me how to get cash flow statement

Hi,
Cash flow statement can be prepared using the report painter and linking the financial statement version to the same.
In this case we need not ativate the cash management.
Thanks,
Shilpa.

Vehicle stuck in Yard Management - Is there a way to change the HU Status?

Hi Everyone,
I'm trying to remove a vehicle that's stuck in Yard Management (under a warehouse) but I had no luck so far. The problem is that the Handling Unit was set to deleted and I haven't been able to change its status through HU02 or even using HUMO. The system status right now is DLTD. When I try to delete the vehicle in YM, it says that I can't because of the status that's in right now.
Is there a way to change the system status back to 'PLND' for example?
Also, if I could find a way to set the user status, would it prevail over the system status?
If more information is needed, I'll gladly provide it.
Thanks everyone!

Hi Petr,
Thanks for replying.
I tried using this transaction but I don't think it's implemented in my company's SAP version.
I think I found what the problem is. In VEKP, the status field (VEKP-STATUS) is set to '0001' (Planned) instead of 0060 (Deleted). But if I display it using tcode HUMO, it shows up as 'DLTD'. Maybe the issue is that both status are not in sync with each other and that's why I can't remove the vehicle from Yard Management.

Active Directory Management Gateway Service installation error

Hey,
When I attempt to install the 32 bit Server 2008 package from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2852 I get an error saying that it's not the correct version. Just in case I tried the 3 other versions, but as
expected they give the same error. Any ideas?
Thanks In Advance,

Hi,
Based on the description, we can try to contact Microsoft Customer Support Services to obtain the hotfix to see if it helps.
A hotfix rollup package for Active Directory Web Service is available for the .NET Framework 3.5 SP1
http://support.microsoft.com/kb/969166
Besides, the following thread focused on the similar issue with ours and can be referred to for more information.
Active Directory Management Gateway Service - install problem
http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_install/active-directory-management-gateway-service/d02c3ee7-ee4d-e011-8dfc-68b599b31bf5?tab=question&status=AllReplies
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Runtime Error due to activating Fund Management

Hi,
I had activated Funds Management in SAP. I started getting Run Time Errors. I deactivated the Fund Management. But still the Run Time Error is there. I am attaching the file for your reference.
I enquired with the Basis consultant who is telling this is a Functional problem, hence I need to solve this. I checked all the configurations, but could not find the exact problem.
Can anybody tell me how this can be resolved.
Note: This error is showing in Quality Server. There was a copying from Production to Quality.

In the error I see the statement before the dump comes is PERFORM exit--entry_from_table | | 1039| IN PROGRAM (-callback_report)
That sounds like an user exit from a table that is not there.
You say you had a copy from production. It could be that a user exit which was not implemented yet in production and therefore not in the exit table. is now also not present anymore in your Q system after the copy. Were there any changes about to go to production ?
Also in the dump I read the comment:
| 1063|* version and guid are used by strategy -> further params for generated | | 1064|* routines. guid is only used for reference purposes and not returned at | | 1065|* the moment
That could possibly mean that this is a generated program. Maybe you need to regenerate it.
I also see: STEP--METHOD_DRULE
That could mean that these have something to do with rules that have not been maintained.
You could ask a programmer to debug the program and see where SAP tries to get the rules and exit information from (which table) .
Maybe that give you a clue what is going wrong.
If you have a table name start SM30 and click customizing. If it opens a customizing transaction then that is where you need to maintain entries.

Active Session Management adds space border around Template

Hi, Does anyone know why flagging the template attribute "Active Session Mgmnt" adds a border around the template? We designed our dashboard to exactly fit into 1024X768 and when we added active session management it is adding a border of space around our template when presented in the web...
Any ideas? Thanks!

Hi Kenneth,
take a look into the source and you will see, that the webpage has been inserted into a html-frame.
Managing the pages in frames is necessary releasing the connections to the server, since if you leaves the page b.e via link a JavaScript-Call is been processed.
If you want to omit these handling, but you want to use the functionality of the resource-release-management, copy the JavaScript-Function into yur source, switch off the "Active Session Management" and try calling the function by an onunload in the <body>-tag....
... or (more simple) switch off displaying the frames in the IE.
Ralf

Active Ingredient Management

Hi SAP experts.
We want to activate Active Ingredient Management.
But before moving further, would like to know:
1 What processes are affected after activation (Ingredient Managementis necessary only for some materials)? For, example
* there will be fields obligatory for filling
* it will be necessary to create additional objects or documents in system
* etc.
i.e. how strong the current business processes will be affected
2. The content of ingredient in each new delivery a miscellaneous, but receiption to do only in one batch. The amount of ingredient will be an average? Issue will be average amount of ingredient?
For example.
* 101 movement type:
2 pieces contain 200 grams of ingredient (1 = 100)
1 piece contains 130 grams of ingredient
therefore
in system 1 piece will contain 110 grams?
* 261 movement type
2 will contain 220grams of ingredient?
Thanks for answers.

Hi,
In Bom you are bom qty is 10 Kai that time system do not know what are the result for batches avalable.
If you keep 10 KG in BOM then if you determine material of 90.00 % then in that case avtual potency you will get it 9 KAI only..
So when you determine the batches in process order it will pick qty in KG by converting in result.
If you are same problem again then check again your MIC for which class charecteristic attached.also see in MIC reference charecteristic on.
Boss I am using this concept regularly in my project its running fine.
So please revert me back.
Regards
SANIL
One more setting in QS61 select your materail & ente. .Where you can see all charecteristics assign in class which is used in your material.master.In this screen select all charecteristic line item except your potency.charecteristic ,delte all selected line item
Now with only your desire charecteristic potency save the screen.
Here actually you are assigning class charecteristic to material.
Regards
SANIL
Edited by: Sanil Vadke on Apr 15, 2010 4:42 PM

How to install / activate 'Yard Management' and BC sets

Hi everyone
I've been asked to look into how to install/activate
'Yard Management' for business warehouse. From what I've found so far online/in SDN forums, it looks like you need to activate it under Logistics Execution in SPRO. But it's not there... so looks like I need to install the necessary 'BC sets' ??
I've found a spreadsheet for 'W70 Yard management' with some
technical names for these BC sets, like
/SMB30/LYYRD_V_B031_D70, /SMB30/T30B_V_B032_D70 etc.
Any idea what these are / whether and where you can get them
(downloadable from SAP??) what transaction you use etc???
Thanks!
Ross (Basis guy)
Edited by: Ross Armstrong on Jun 18, 2008 9:13 AM
It seems we need this on a 4.7 SAP system, whereas this other docs/installing via Best Practices seems to be for ECC5 onwards... any ideas anyone?

You should activate 0ANALYSIS_PATTERN (and all necessary objects). Use this as starting point for customizing your own template. Then use SPRO transaction RSCUSTV27 to change fields "Broadcasting" and "Ad Hoc Analysis" to your customized templates.
Activate and customize 0QUERY_TEMPLATE_BROADCAST_PDF if you need to broadcast PDF's. There's no place SPRO that I know of where you can configure this to use a custom template.
You don't need 0QUERY_TEMPLATE_BROADCASTING70. It's labeled 70 but in fact it's a 3.5 web template.

Implement Activity Based Management

I am currently working with a client that wants to implement Activity Based Management. I am looking for any information on how to approach this type of implementation within the Oracle eBusiness Suite. The client is currently running OTL, HRMS, Projects, GL, PO, AP, AR. I am currently researching the ability to do this with OTL and Projects. Has implemented the Activity Based Management Module?

Just wondering if you have got any info to share from your research. I have a similar predicament. I am trying to retrieve timesheet details of ex-employees from OTL. Tried to link hxc_time_building_blocks, hxc_time_attribute_usages, hxc_timecard_summay, hxc_time_attributes, pa_project_assignment, pa_resources_denorm, pa_project_subteams, pa_project_subteam_parties, per_people_f etc.
But in vain. Do you have inputs on how the self service timecard inquiry retrieves the timecard details of active current employees. I believe it is dynamically populated via some APIs. Any thoughts shared is highly appreciated.
Thanks
uds

Activating Yard Management

Similar Messages

Maybe you are looking for