Activation après maintenance de Windows (8)

A chaque fois que je réalise des opérations de maintenance sur mon ordinateur (Windows 8), comme le nettoyage de la base de registre ou la reconstruction d'une grappe RAID, mes logiciels adobe CC me demande à l'ouverture d'accepter à nouveau le contrat de licence en me connectant. Ceci me pose un problème dès que je veux utiliser un logiciel et que je n'ai pas de connexion internet !!! Par avance merci de bien vouloir me communiquer une solution durable.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Similar Messages

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

LabWindows blocage applicatif après portage sous Windows XP

Bonjour,
Nous avons porté une application réalisée en 2004 avec LabWindows/CVI 6.0 et qui tournait sur un PC sous Windows 2000, sur un PC plus récent sous Windows XP SP3.
L'application non modifiée s'est bloquée plusieurs fois (écran figé sur un bouton de l'interface encore enfoncé) avec un des deux microprocesseurs occupé à 100%.
Je précise que j'avais installé et activé LabWindows/CVI 8.5.1 sur cette machine XP alors que la machine initiale Windows 2000 ne contenait que LabWindows/CVI 6.0
J'ai donc recompilé l'application avec LabWindows/CVI 8.5.1 et aussi converti les fichiers UIR en utilisant le format texte intermédiaire (fichiers TUI), et toujours ces phénomènes de blocage après stimulation des objets de l'interface.
Ce type de problème est-il connu et que faire dans ce cas ?
Pour info, l'application utilise aussi un module FieldPoint classique qui date de 2004 aussi, et pour l'interfacer sous Windows XP j'ai installé le CD Field Point Explorer 6.0.1
Cela dit pas de message d'erreur lié au module d'entrées/sorties et lecture correcte des entrées TOR et codeur, par exemple.
Merci de m'indiquer une voie de progression, car même en mode debug l'application se plante, et lorsque je fait un "break execution" je me retrouve systématiquement sur l'appel "RunUserInterface ()".
Je n'ai donc pas de piste pour comprendre le problème dans cet environnement Windows XP.
Evidemment nous avons produit d'autres logiciels avec LabWindows/CVI 8.5.1 et qui fonctionnent sous Windows XP SP3 sans soucis.
Merci par avance de vos idées et indications.
Franck Dubreuil

Bonjour,
Avez-vous essayé d’installer le run time de LabWindows 6.0 ?
http://joule.ni.com/nidu/cds/view/p/id/77/lang/fr
Voici un lien qui vous informe des compatibilités.
http://sine.ni.com/np/app/flex/p/docid/nav-110/lang/fr/fmid/6322/
Cordialement
Samuel G. | Application Engineer Team Leader
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Active directory recycle bin in Windows STORAGE server 2008 R2

I'd like to find a tool that helps me to monitor deleted server files. I understand that this tool is called Active directory recycle bin. I can't enable it. I can't even open lpd.exe. I'm using Windows storage server 2008 r2 essentials. Could someone
help me with that? Thanks in advance.

In that case you must use a solution which combines Auditing
and Backup solutions. Just to know who has deleted a file or folder does not really help you. You must be able to restore the deleted file or folders.
If you need to find out at what time who deletes what file you should use auditing. Normally organizations enable auditing on sensitive data and folders to keep track who touches the stuff. Auditing is enabled in windows and by the administrator. Take a
look at the below links if you want to enable auditing on files and folders:
Use auditing to track who deleted your files
However do not forget that you need to have backup solutions in order to restore a deleted file in case someone accidentally or intentionally deletes a file or folder. Using System Restore with Previous Version feature may comes handy if you are dealing
with small number of computers. Otherwise you need to prepare yourself for a backup plan using Data Protection Manager as Denis mentioned or Windows Backup role (WBadmin) including in Windows Server 2008. More info on links below. I have included a video of
how to recover lost data using previous versions for you.
Recover lost or deleted files (Video)
Windows Server Backup Step-by-Step Guide for Windows Server 2008
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Windows Azure Platform Support: "Prompted for "Windows Activation" when logging onto a Windows Azure Role Instance using RDP"

Symptom
When a user interactively logs (using RDP client) on to a Windows Azure Role Instance running Windows Azure Guest OS 1.11, they see a “Windows Activation” dialog box.
Action
The user can ignore this dialog box by simply clicking either “Cancel” or “Activate Later” button on the “Windows Activation” dialog box. This pop-up window is just an UI issue in Guest OS 1.11 and no OS functionality
issue. All Role instances running any version of Windows Azure Guest OS has valid volume licensing key and are already activated. There is no need to provide any activation key to validate the OS.
Please don’t try to activate Windows Azure Guest OS using your Windows Server OS Key, this will cause unexpected downtime and will require a reboot. Activating Windows Azure Guest OS is not a supported scenario.
Workaround
Use the next available OS or any previous version of OS (e.g., 1.10) to work around this issue.
Other forum references:
RDP on Webrole with newest guestOS: why is it asking for windows activation
Windows Azure Platform Support - If you found this post useful, let us know by clicking "Vote as Helpful". - #wapsupport

this is still an issue and the work around did not work

Active-Passive Failover cluster in Windows Server 2008 R2

Hi,
As per the client requirements, I build an active-passive Oracle 11g R2 database cluster in Windows Server 2008 R2.
(Used Microsoft cluster as Client don't have Fail Safe licence)
As per the configuration, I follow the below mentioned steps:
a)OS vendor configured Active-Passive Windows Cluster
b)Installed Oracle 11g R2 on both the nodes with same ORACLE_HOME name
c)Create Listener and configured it with cluster IP in Node1
d)Create Database from Node1. Physical files location are all in Storage
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2
f)Configure Listener with the same Oracle SID.
g)Test database failover from Node2 with Listener registration
h)Open the Windows Failover Manager to configure the Oracle Database and Listener Service in the Cluster Group
Now I am facing problem by moving Cluster Group movement. Whenever trying to moving the group, Listerner service is not getting up by Cluster Manager as quorum is not included in the group and that quorum disk is not moving in the failover node with the Oracle Cluster Group. As per my understanding Quorum having information of Cluster IP which has been configured with Listener.
But when I am shutdown one node, then in the other node all the resources successfully moving and cluster able to online all the resources. I guess at that time Quorum is also moving and thus cluster can able to make Listener online.
Please suggest how to resolve this issue. Means how can I make Listener up instead having any dependencies with Quorum in the fail over node?
Thanks a lot for your help.

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

OAM and MS Active Directory Integration on Non-Windows Server envrionment

I will start by saying that I am dealing with a heterogeneous environment here where multiple systems are run by different levels of management. Our Oracle systems chose to go all *nix (Oracle Solaris and Red Hat Linux) and hence we do not have a single Windows Server in our Oracle services area and would really like to keep it that way as we prefer to keep a uniform platform across our Oracle servers. However, the desktop side of our department has chosen to use Microsoft Active Directory and now we wish to integrate and perform authentication against it for our OAM protected sites. We are in the initial setup phase but we have no desire to implement a critical server such as OAM on the Windows platform and would rather tie OAM running on a Red Hat Linux server to Active Directory. We will also be using OID as we run Portal but do not want to use it as our authentication authority for Oracle Products (local policy is that Active Directory is the only valid credential authority on site as we are moving to true Single Sign On across our desktops and web applications). I have a few questions.
1. Can it be done natively or would we have to run the Windows version of OAM?
2. If you must run OAM on Windows to use AD for authentication, Is there some way to setup the Windows version of OAM as sort of an interface for our main OAM server running on Red Hat Linux to do the AD Auth?
3. Can it be done using some sort of an interface such as Oracle Virtual Directory to interface with the LDAP interface to MS Active Directory?

Hi David,
Answers in-line
1. Can it be done natively or would we have to run the Windows version of OAM?
You can run all of the OAM Servers on *nix, and simply point to AD as an OAM data source on the machine:port that AD is running on. There is no need for the OAM components to be on Windows.
2. If you must run OAM on Windows to use AD for authentication, Is there some way to setup the Windows version of OAM as sort of an interface for our main OAM server running on Red Hat Linux to do the AD Auth
As above, this is not necessary.
3. Can it be done using some sort of an interface such as Oracle Virtual Directory to interface with the LDAP interface to MS Active Directory?
Yes, this is entirely possible. Even though it is not necessary in your situation, it often provides more flexibility to front-end the user store with OVD, for example when adding/renaming Windows domains, or specifying specific branches for users and so on.
Regards,
Colin

Installing and Activating Studio MX 2004 on Windows 8 64-bit - Astonishing Method

Not being a professional, but having been a "hobbyist" webmaster (now retired from that hobby), I have to build a web page for someone, so I installed Studio MX 2004 on Windows 8.
This was an upgrade from Dreamweaver 4. I had the serial numbers for both and I entered them appropriately and got a green checkmark on both. Then it wouldn't activate over the internet since that server, I later learned, has been discontinued. The 800-number on the installation screen was no longer valid, so I came to Adobe.com and finally found a phone number for activation. So I tried activating over the phone, but the were asking for things I didn't see, so I gave them what I saw and that didn't work. So I came to the Adobe website and then I found this page:
http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
And what I saw there was actually quite astonishing. It gave me a different serial number to enter into Dreamweaver, and voila! It was activated and ready to go, and there was no need for the serial number from Dreamweaver 4.
So my first question is: What is going on here? Is my old serial number just no longer any good at all, or are they just giving out free serial numbers for outdated software nobody wants to use anymore, except me?
Message was edited by: Phanes7 (Removed Homesite 5 from the title -- it won't recognize my license number, but I don't really need it anyway.)

Yes, all of what you described was obvious. I was just asking how the software is authenticated as something that's been paid for with what seems to be a "wild card" license number.

Verizon Employees Actively Discouraging customers from Buying Windows Phones

My wife and I both decided to buy Windows phones this time around. We had previously been Android people but wanted to try something different. We walked into our local corporate store (somewhere in TX) and when we told the salesman what we wanted (weren't interested in, but WANTED) he told us "you don't want those". We tried for a few minutes to convince him that YES, we did want those and when that didn't work we eventually had to go and get a manager in order to actually purchase the things we came in for.
After looking at all of the forums outside of Verizon it seems that this is the normal experience.
This is unacceptable. I don't care if you want to buy an iPhone, a Nexxus, an Icon, or an HTC One M8. There is no excuse for this kind of behavior. VZW needs to take a good look at their culture and remind their employees that they are a vehicle for delivery to the public, not gatekeepers. We need to let the CEO know about what is going on in his stores.
You can contact Mr. Daniel S. Mead (CEO) by going to www.verizon.com/about/leader/contact/73.
Maybe if enough of us say something they'll try to at least pretend they appreciate our money.
Also, it would be really great if he would consider releasing the WP 8.1/Cyan update which is already sitting in VZW's hands at some point.

Yea, I've posted about this very thing before. As the techie in the family and for all my friends, everyone comes to me before they purchase any tech gear (as well as having me for their free support hotline. ) When I take people into Verizon and discuss the pros and cons of each of the phone operating systems as well as the devices themselves, I give the individual the choice as to which device they purchase. But if the person chooses a Windows Phone, almost every time the Verizon staff actively tries to push them towards Apple or Android. There's even been times that Verizon told us that there is no such thing as a Windows Phone. Just a few days ago, I took someone in and they wanted the Icon. The clerk said there was no such thing. I took them over to the wall and showed it to them. They became quite angry and unprofessional. I grabbed the manager and she didn't care. The person still wanted the Icon and when they brought out the phone, they brought out the iPhone and tried to set us up with that.
Unfortunately, it's not isolated to one store or one city. I personally know many people around the USA where the Verizon store staff have shown the same animosity towards Windows.

How to remove Internet Explorer Maintenance with Windows 8

In order to edit group policy preferences for Internet Explorer 10 and newer, we are editing group policy exclusively with GPMC installed on a Windows 8 computer. I have the understanding that once you edit group policy with a newer OS, it shouldn't be edited
with an OS prior. Now we are ready to remove policy settings using Internet Explorer Maintenance by clicking "Reset Browser Settings" for that policy node. However, IEM is not visible with Windows 8. Is it safe to go against best
practice and edit group policy with for example GPMC installed on a Windows 2003 server just to remove IEM policy? Is there a better way to accomplish this task?
Thank you

In order to edit group policy preferences for Internet Explorer 10 and newer, we are editing group policy exclusively with GPMC installed on a Windows 8 computer. I have the understanding that once you edit group policy with a newer OS, it shouldn't be edited
with an OS prior. Now we are ready to remove policy settings using Internet Explorer Maintenance by clicking "Reset Browser Settings" for that policy node. However, IEM is not visible with Windows 8. Is it safe to go against best
practice and edit group policy with for example GPMC installed on a Windows 2003 server just to remove IEM policy? Is there a better way to accomplish this task?
The DLLs for IEM are removed when a computer is upgraded to IE10/IE11 (or if it ships with IE10/IE11).
This means that you can't remove the IEM settings from a GPO, unless you have a machine that has an older (IE9 or less) browser.
You can either;
a) delete the GPOs which you already know do contain IEM settings (here's a tip on how to find those:
http://deployhappiness.com/tracking-down-rouge-cses-ie-maintenance-addition/ )
b) use a computer which has an older browser, with GPMC/RSAT on it, to do the "IEM Reset".
I would not use WS2003 for this, since WS2003 doesn't understand ADMX, and you might have already used a newer OS to author settings into that same GPO. I would use WS2008R2 or Win7 to do this (ensuring that the browser on that computer is IE8 or IE9 and is
not IE10 nor IE11)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

License Activation After Installation of an Windows 7 Image

I have a volume license installed on a image that I am deploying to machines in my office. After installation of the image on the computer I have to reactive the license. Is this normal procedure of is there someway I can ensure that the license
is activated after deployment so I can skip this step of the setup process?

It is required that license activation occurs on each machine, after Windows is installed on each machine.
Every Windows license is individuated for every machine (a unique CMID is generated).
This is especially important for imaged/cloned machines. Are you using sysprep? Are you performing a rearm prior to image capture?
You can have the activation occur automatically. Are you using MAK or KMS ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Downloading CS3 on new computer and its asking from my CS2 old Downloading CS3 on new computer and it asking from my CS2 activation code? I no longer have thactivation code? I no longer have the CS2 code I just have the CS3 activation id? I have windows 8

Downloading CS3 on new computer. The new Windows 8 won't let me download without my CS2 activation code? I no longer have the CS2 code I just have the CS3 upgrade activation id? What do I do?

You will need to contact Adobe support thru chat to see if they can help resolve the problem.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Product activation failed office 2013 at windows 8.1

when i update my windows 8 laptop to windows 8.1 i was shocked when i open my office 2013 and it says product activation failed though it was activated, when my laptop is running windows 8, through kmsnano
what should i do in order to reactivated it

Hi,
Which Office version did you use? Office 2013 RT ,home or other? Please follow the link to activate Office 2013:
http://office.microsoft.com/en-in/support/activate-office-2013-programs-HA102819770.aspx
Regards,
George Zhao
TechNet Community Support

HT201358 Can ARD3 work with the Active Directory setup on a Windows machine and without the need of Open Directory

We need the 'Golden Triangle' setup to work with ARD3 running on a Mac server with client Mac details retrieved from a Windows Active Directory. In this system, the ARD3 will be used to install packages from a Mac OS X server, where the client Mac list is gathered directly from a Windows Active Directory, which is already in place.
So, please guide me whether Apple Remote Desktop 3 is capable of getting client machine details from an Active Directory without the need of re-creating the client Mac list in the Mac server running ARD3.
If ARD3 can not be used in this case, do you recommend any other tools that can resolve our issue.
Thank you in advance.
Sudheesh.

ARD cannot directly obtain client information from Active Directory, no. It may be possible to create a script that would get such information and be able to put it into ARD, but I wouldn't begin to know how to write such a script. You may also be able to bind your OS X Server to ARD and create groups there. This article is obsolete for 10.6 or later but may provide some clues as to how to proceed:
http://support.apple.com/kb/TA24276
There are a number of third-party systems that can manage Macs that may be able to draw information from AD, such as Casper, LANDesk, and others. Which if any would meet your needs depends on many factors including how many devices you need to manage, whether you're looking for a cross-platform tool, your budget, etc. This is a difficult issue to address in a forum like this since there are so many variables to be considered.
Regards.

Activation après maintenance de Windows (8)

Similar Messages

Maybe you are looking for