Activation date in February?
Given that I have only just placed my order for Infinity but I have been told to expect my service to be activated in February? This seems an exceptionally long wait.
Having just tracked my order I have found out that seemingly an engineer is not required at my new property; if this is the case then why is it going to take them >2 months to activate my telephone and Internet services?
I have uploaded a screenshot of my order tracking here to explain what I mean.
Kind Regards,
Sylett
They're a bit busy at the moment, what with demand, and Christmas.
But to get Infinity you need a working BT phone line and it looks like they're going to install the phone line first and then you will have to re-order Infinity.
Your screen shot truncated the planned installation date for Infinity.
To hide this sig go to http://community.bt.com/t5/user/myprofilepage/tab/user-preferences and uncheck 'View signatures in posts'.
Similar Messages
-
2nd activation date passed....still no broadband
After ordering broadband from BT we were originally given and activation date of Jan 26th. This was then pushed back to February 2nd and then, just hours later I received and email stating it would be the 5th.
The equipment was due to be delivered on the 2nd but actually turned up on the 3rd when no one was in so we had to pick.it up from a local post office. All of this was rather annoying but I could have lived with it if it had actually been activated on the 5th! I've spent an hour on the phone, banded about between different people just to be told it will be activated within.48 hours. How helpful. I definitely want my activation fee refunded and some kind of compensation but more than anything, I just want the broadband I'm paying for to actually work! It's now 15 hours after when I was told it would definitely be working by and still nothing!
I'd been with Virgin for years before this. Boy do I wish I'd stayed with them. What a joke.There is probably a technical problem.
Regarding compensation, the following page should explain it.
http://bt.custhelp.com/app/answers/detail/a_id/9394/~/customer-service-guarantee
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Error while activating data loaded into DataStore Object in BI 7.0
Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri. -
Error in Starting Oracle BAM Active Data Cache
I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nandahi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter
-
"#" in the ODS active data view
Hi all,
I have a question. I load data (text strings) into ODS object. Then I look into new or active data and I can see symbols "#" on the places in strings, where occurs any special character (for example from any language). I do not know wheteher it is stored in SAP (database) in this bad format or wheteher it is only represented in this bad format due to my different encoding ?? Normally special characters are represented in GUI well. Thanks
JJHi JJ,
as you can see them in the middle of the texts, it just the way BW displays these characters.
Siggi -
DSO upload and no data in Active data table
Hi Experts,
I have a strange problem.I have loaded data to DSO from DS in BI7. It has the further uplaod to cube.I have activated the DSO and it went sucessfull and had Request ID generated. It has added and transfer records available like 150000 records as I have done full upload. strangly I cannot see any data in Active data table.
Pls advise how can I check the data I am doing some mistake.I have data mart status for this DSO. the deletion of the DSO and reloading could that create the data not visible in DSO even after activation
Pls advise.
TatiHi,
I believe this got something to do with the display setting.. After displaying the data, get into the settings menu and look for Layout option --> display --> see if there is any default setting applied.. change this setting to something else.. create a setting with all the columns dragged & dropped.. These are the options you can try..
If this did not resolve.. please try displaying the data from SE16 transaction and post us the results..
Thanks,
Naren -
Data not going from active data table to new data table -DSO activation iss
Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is goingHi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
Please suggest.
Regards
Sudha -
Error while activating data in DSO
Hi Gurus, While activating I am getting these 2 messages "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER" and the other message is "Fiscal year variant K4 not expected" and in some other Data Packages I am getting "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER"
Kindly help in this matter.Hi,
Try these threads.
Error when activating data in 0FI_GL_04 ODS (SIDS)
Unable to activate data in DSO
Error when assigning SID : Action VAL_SID _CONVERT table
Can'T Activate ODS Data
FI error in rspc chain
Same issue as yours.
Hope this helps.
Thanks,
JituK -
Error while activating data source in BI
Hello Team
I am facing issues while activating data source. I followed following steps .
a)First i created my target
b)Then i made my Primary key as info provider
c)Then i created one source system under file.
d)Then i went to data source and created one application component
e)In this application component i created my data source
f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu -
Activation date just came, and went..
Hi all,
It's kind of ironic that I decided to come back to BT because I had had enough of Sky. Being increasingly disgruntled with the service that Sky was providing over the last year (I had both line rental and Broadband with them), I literally couldn't wait to leave and come back to BT. So, I signed up with BT on Jan 1st (Through Return to Donor). I wanted to take my phone number with me. I then phoned up Sky a couple of days later and cancelled. At this point, Sky put the cancellation date for January 13th, but my BT activation date was 17th Jan (I think her name was Emily at BT who told me that, and who advised me to get Sky not to cancel on that date, otherwise I would have to pay a connection charge).
I phoned Sky and got them to change the date (After a lot of pushing). BT changed the date to 21st January for activation and so the cancellation date with Sky was also January 21st. So here I am, expecting my Sky Line Rental and Broadband to stop today, and BT to provide the phone service (With me signing up for Broadband once I get paid at the end of the month). I phoned up multiple times prior to today to make sure that there were absolutely no problems. The guy I talked to yesterday said: "There are no problems, sir. Everything is going smoothly with the transfer." I was awake at 8am today, and around 9am, the broadband and phone stop working. Sitting there, I'm expecting the phone to start working sometime soon. 10am comes and goes. 1pm comes and goes. 5pm comes and goes. You get the picture. It's now 9.19pm and no service. But that's not what's irritating me. What's starting to annoy me is that BT have disconnected me on the agreed date as they told me to make in relation to Sky, but haven't reconnected me. And judging by other peoples' stories, that means I'll have to pay a connection charge when I'm not at fault and I did everything that I was asked to do. Also, I dread to think what will happen in relation to the phone number that I've had for a long time.
The phone number to call is 0800 800 150 if you're not connected by 8pm. Since that's long gone, I'll be phoning in the morning. What would you guys advise doing? Get out now? My father had the same problem - He phoned regularly to make sure there were no problems until the day itself, and still got blessed with no working phone line. It took him over 2 months to sort it out, and I'm at University so can't afford to take so long, nor do I have the money to correct problems where I'm not at fault. I'm actually thinking of cancelling the order - Is that possible? Even though I placed the order on Jan 1st, and activation was supposed to be today (21st Jan), no service is being provided.
Any advice would be greatly appreciated. Thanks in advance.Hi QuantumSanctum,
Thanks for the post and welcome to the forum. I am sorry for the delay in activating your BT phone service. I can help you.
Please drop me an email to the email address in my profile. (click on my name and you will find the address under the "about me" section). Include any order details that BT have provided and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Error while activating Data source
Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
BbeeHi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT -
Error while activating data from new table of DSO to active table
HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHYHi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM -
Invalid character error while activating data in DSO.
Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoopHi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
data: l_d_length like sy-index,
l_d_char type c,
l_d_index type sy-index,
l oopx like sy-tabix.
data : xinfobj(30) type c value 'RABC'. -> this is ur infoobject name
clear : result.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = tran_strucutre-XYZ -> object name in ur structure
importing
output = result.
l_d_length = strlen( result ).
do l_d_length times.
l_d_index = sy-index - 1.
l_d_char = result+l_d_index(1).
call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
exporting
i_chavl = l_d_char
i_iobjnm = xinfobj
I_S_COB_PRO =
I_T_COB_PRO_CMP =
exceptions
chavl_not_allowed = 1
others = 2
if sy-subrc <> 0.
result+l_d_index(1) = ' '.
endif.
enddo.
Regards;
Jitendra -
DBIF_REPO_SQL_ERROR short dumps while activating data in ODS
Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error DBIF_REPO_SQL_ERROR
Date and Time 08.01.2008 13:01:08
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
"CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
SAP Release.............. "640"
Application server....... "psapdb"
Network address.......... "158.58.65.11"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00CD615C4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 22
Short dump setting....... "full"
Database server.......... "psapdb"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:49:57"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
Client.............. 200
User................ "R3REMOTE"
Language key........ "E"
Transaction......... " "
Program............. "SAPLRSSM_PROCESS"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
"CHECK_IF_ANALYZE_IS_NESSESSARY".
The main program was "RSPROCESS ".
The termination occurred in line 1143 of the source code of the (Include)
program "LRSSM_PROCESSF04"
of the source code of program "LRSSM_PROCESSF04" (when calling the editor
11430).
The program "SAPLRSSM_PROCESS" was started as a background job.
Job name........ "BI_PROCESS_ODSACTIVAT"
Job initiator... "RPRIYANKA"
Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job: BI_PROCESS_ODSACTIVAT / 02010102
Date Time Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05 SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem. -
Error while loading to active data table in DSO
Hi,
please help me in resolving the issue with active data table . when i am activating the new data table the job gets cancelled with message as 'Error when assigning SID: Action VAL_SID_CONVERT table OCALMONTH'.
Thanks and Regards,
Prasad.Hi,
In the displaying error message tab of ODS activation, you will get error message and invalid value for the 0CALMONTH will be displayed. Search the NEW TABLE of ODS with the same value, identify the error records.
If you have PSA in the flow, delete (w/o making the status RED), correct data in PSA and reconstruct the data.
If you don't have PSA, you have to delete by making red, reload through PSA correcting the erroneous data in PSA.
Regards
Chandu
Maybe you are looking for
-
I recently updated to Itunes 12.0.1. Now, when I plug in my Ipod and go to the Music section, the Itunes Match option is unavailable. Which means that my music is taking up too much memory on my Ipod Touch. How do I re-enable the IMatch option so
-
Trouble burning DVD in Final Cut Pro X (stops at 66%)
I have been trying to burn a DVD on Final Cut Pro 10.1.4, but I find that it always stops the burning process at 66%. An error does not pop up; it just simply stops at the same place every time. I have tried burning different projects of different
-
Intel MacBook Pro Mac OS X 10.6.8 Firefox 8.0 (same problem occurred with version 7) Yahoo Mail shows same problem
-
Hi every one. i am trying to create a sales order with oracle adapter using an oracle API. but i am facing an error, <X_RETURN_STATUS>U</X_RETURN_STATUS> <X_MSG_COUNT>1</X_MSG_COUNT> <X_MSG_DATA>FND FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_PUB N
-
Multi-line=false is multi-line=false-almost?
How can you prevent users from entering line-breaks in text fields? I have multi-line set to off but it doesn't stop them from opening an editor and entering the line breaks there.