Activation/Deactivation issues with CS 6 install on new PC

I wish to install my CS 6.0 application onto a new workstation. It is currently installed on a PC that will be retired as a back-up machine should my new one need repairs. Since my work will now only be done on the new workstation do I need to "Deactivate" the CS 6.0 application on the retired PC? I understand that the application can be installed on two computers as long as they are not using the application at the same time but not sure how this works with your "Deactivation" and "Activation" procedure.
Also, in November 2012 I upgraded my CS 6.0 to a monthly subscription plan for $29.99 via the Creative Cloud program to make sure my suite was up to date. Will this complicate how I install the CS 6.0 application onto my new workstation?

Actually, it will make it easier. Just install the apps you need from creative.adobe.com. Sign in there with your Adobe ID and then click on the download center.
All of the CS6 and newer CC apps will be available to you.

Similar Messages

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Issue with Generate Create Script in new ODT 11.1.0.6.10 beta

I've tried this on several tables in my database. I choose Generate Script to ... a file, for a given table it gives me the error message "An error occurred while writing to fil: \nValue was either too large or too smal for an Int32."
(It doesn't matter if I'm in a Oracle database project or some other project.)
Trying to Generate Script To Project... when I'm in a Oracle Database Project, Visual Studio (2005) crashes. It appears to be some overflow exception according to crashinfo:
EventType : clr20r3 P1 : devenv.exe P2 : 8.0.50727.762 P3 : 45716759
P4 : mscorlib P5 : 2.0.0.0 P6 : 461eee3d P7 : 407b P8 : a3
P9 : system.overflowexception
(With ODT 11.1.0.5.10 beta it worked fine dispite the issue discussed in thread: Re: Issue with Generate Create Script in new ODT 11.1.0.5.10 beta
/Tomas

Tried to debug this error and got these exception details. Hope it helps!
/Tomas
System.OverflowException was unhandled
Message="Value was either too large or too small for an Int32."
Source="mscorlib"
StackTrace:
Server stack trace:
at System.Decimal.ToInt32(Decimal d)
at System.Decimal.op_Explicit(Decimal value)
at Oracle.Management.Omo.TableSpaceQuotaDetails.FillTableSpaceQuota(OracleDataReader reader)
at Oracle.Management.Omo.User.FillTableSpaceQuotas(OracleDataReader reader)
at Oracle.Management.Omo.Connection.GetUserCollection(Boolean refresh)
at Oracle.Management.Omo.Connection.GetUsers(Boolean refresh)
at Oracle.Management.Omo.TableSQLGenerator.GetCreateSQLs(OmoObject obj, ArrayList& typeAndNames, Boolean checkRequired, Boolean appendSchemaName)
at Oracle.Management.Omo.TableViewBase.GetCreateSQLs(Boolean appendSchemaName)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScript(OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScriptAsyncMethod(IntPtr ppvObj, OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType, ICollection& scriptText)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateScriptAsyncMethodDelegate.EndInvoke(ICollection& scriptText, IAsyncResult result)
at Oracle.VsDevTools.OracleUILDBProjectServices.OnGenerateScriptAsyncCompletion(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)

Previous computer crashed without my Adobe CS3 Design Standard for Macintosh application being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help!

Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.

CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.

Having issues with phone calls on my new phone.

Having issues with phone calls on my new phone. Other user is hearing echoes or nothing at all. This seems to be a common issue on here. VERY annoying! Anything seem to fix this problem?

I had similar issues - Turns out it was a hardware problem or bad antennae - Call the tech support number and they can do some testing to determine the issue. They might be able to give you a replacement if you do it quickly.

[SOLVED]Some issues with fresh arch install.

I freshly installed arch after a pretty long period of time of using other distributions and forgot how many issues I have to deal with when using it.
Alsamixer does not detect my headphones when i plug them in...(does not mute / unmute automatically speakers / headphones)
And another issue with the xorg server i think, I have a notebook and after every reboot i have to look up after touchpad with xinput --list then --setprop <id>. How can I make it permanent? It's annoying.
Last edited by dede24ever (2014-12-27 22:11:08)

Add a command to toggle the auto-mute with the same key, perhaps?
Anyway, that command in my i3 set up does not effect the auto-mute mode so there may be something else going on in your system.
Ooops -- my mistake, my system does that as well...
Maybe something to do with pulseaudio -- I didn't have pulseaudio when I used i3 and I didn't notice that problem then.
EDIT: It might be wise to open a fresh thread for this specific problem -- be sure to use a descriptive title to get the attention of the sound experts (not me!).
Last edited by Head_on_a_Stick (2014-12-27 20:26:11)

Issue with OEM 11g Install in Windows 2003 server - Urgent help Required !!

Hi All,
I am encountering the following issue while installing the OEM 11.1.1.0 with Oracle WLS 10.3.2 with WDJ7 Patch installed and DB-11.2 and OS-Windows Server 2003.
I have dropped the schema sysman and sysman_mds as specified in the install guide and did all the necessary prerequisites as specified.
the Exact error is as follows : I am getting this error at OMS Configuration step of OEM Installation..
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: Setting demo trust
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: Setting CACERTS
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: Inside Fresh install
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: response file params not null, invoking the init method
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::lock consoleTRUE
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::lock upload:TRUE
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter processParam
FINE: OMSWLSAdapter::Node manager port is7401
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::EM console port7788
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Checking EM console port duplicate7788
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Checking duplicate EM upload https port:4906
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Admin host is abc.xyz.com
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter processParam
FINE: OMSWLSAdapter::EM instance home isC:\Oracle\gc_inst
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter processParam
FINE: OMSWLSAdapter::Webtier home is C:\Oracle\OEMHome\oms11g\..\Oracle_WT
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Checking EM duplicate upload port:4895
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Checking if admin https is duplicate port
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Admin https port is0
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Checking duplicate port for console https port7799
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::EM instance host isabc.xyz.com
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter processParam
FINE: OMSWLSAdapter::Domain name value is GCDomain
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter processParam
FINE: OMSWLSAdapter::MS Https port is7301
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::Repository connect string(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=abc.xyz.com)(PORT=1521)))(CONNECT_DATA=(SID=ORCL)))
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter processParam
FINE: OMSWLSAdapter::Checking duplicate msport 7201
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initCommon
FINE: OMSCAConfigMode::fetching username
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.framework.OMSCAConfigMode initBase
FINE: Initializing omscacontext
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter init
FINE: OMSWLSAdapter:: Webtier instance name isinstance1
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter init
FINE: OMSWLSAdapter:: OHS Comp name isohs1
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter init
FINE: OMSWLSAdapter:: Initializing the adapter
Aug 1, 2011 11:36:37 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter init
FINE: Configuring node manager directory as ..C:\Oracle\OEMHome\WLSERV~1.3\common\emnodemanager20110801113637
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.framework.OMSCAFreshInstall execute
FINE: Doing the pre requisite check
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.framework.OMSGenericAdapter doPreRequisiteChecks
FINE: Invoking the preReqChecks
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil checkHost
FINE: Name: abc.xyz.com
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil checkHost
FINE: Addr: 10.136.126.133
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil checkHost
FINE: Name: abc.xyz.com
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil checkHost
FINE: Addr: 10.136.126.133
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil checkPort
SEVERE: Exception:
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:365)
at java.net.ServerSocket.bind(ServerSocket.java:319)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil.checkPort(CoreOMSConfigAssistantUtil.java:2251)
at oracle.sysman.omsca.framework.OMSGenericAdapter.doPreRequisiteChecks(OMSGenericAdapter.java:173)
at oracle.sysman.omsca.framework.OMSCAFreshInstall.execute(OMSCAFreshInstall.java:90)
at oracle.sysman.omsca.framework.OMSConfigAssistantDriver.main(OMSConfigAssistantDriver.java:210)
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.framework.OMSGenericAdapter doPreRequisiteChecks
FINE: Unable to resolve EM https upload port
Aug 1, 2011 11:36:42 AM oracle.sysman.omsca.framework.OMSGenericAdapter doPreRequisiteChecks
FINE: Repository connect string is is (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=abc.xyz.com)(PORT=1521)))(CONNECT_DATA=(SID=ORCL)))
Aug 1, 2011 11:36:44 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil checkRepository
SEVERE: Exception:
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:406)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:399)
at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:799)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:368)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:275)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:206)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:156)
at oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil.checkRepository(CoreOMSConfigAssistantUtil.java:2353)
at oracle.sysman.omsca.framework.OMSGenericAdapter.doPreRequisiteChecks(OMSGenericAdapter.java:189)
at oracle.sysman.omsca.framework.OMSCAFreshInstall.execute(OMSCAFreshInstall.java:90)
at oracle.sysman.omsca.framework.OMSConfigAssistantDriver.main(OMSConfigAssistantDriver.java:210)
Aug 1, 2011 11:36:44 AM oracle.sysman.omsca.framework.OMSGenericAdapter doPreRequisiteChecks
FINE: Repository username and password invalid
Aug 1, 2011 11:36:44 AM oracle.sysman.omsca.framework.OMSGenericAdapter doPreRequisiteChecks
FINE: Repository database version is null
Aug 1, 2011 11:36:44 AM oracle.sysman.omsca.framework.OMSGenericAdapter doPreRequisiteChecks
FINE: Checking MDS schema with devMode? FALSE : FRESH_INSTALL
Aug 1, 2011 11:36:44 AM oracle.sysman.omsca.framework.OMSGenericAdapter doPreRequisiteChecks
FINE: MDS Schema is there
Aug 1, 2011 11:36:44 AM oracle.sysman.omsca.framework.OMSCAFreshInstall execute
SEVERE: ERROR: Pre req checks of EM failed.
Aug 1, 2011 11:36:44 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: Got resultfalse
FYI : Query Results for sysman schema and sysman_mds in DB are :
SELECT COUNT(*) FROM ALL_USERS WHERE
USERNAME='SYSMAN' -----> No Rows
select * from SCHEMA_VERSION_REGISTRY where COMP_NAME='Metadata Services' and owner like '%SYSMAN_MDS%'; - No rows
(Note : I have a seperate schema defined as Dev_MDS present in the same DB where i m installing OEM, which i think would not effect)
I request to suggest some good working solution for this issue asap.
Regards,
Ram

Hi,
could you tell me how to check the "MOS tech note"You can check MOS tech notes @ htttp://support.oracle.com --> need to have valid CSI
Do I need to configure the enivornment parameter of ORACLE manually?
such as ORACLE_HOME, ORACLE_BASE, ORACLE_SIDSet all these env. parameters (ORACLE_HOME, ORACLE_BASE, ORACLE_SID) manually and give a try.
thanks,
X A H E E R

Network issues with Leopard fresh install

I have an iBook that I was running Leopard on with no issues yesterday. It is no longer my main computer, so I wanted to wipe everything and start from scratch with a fresh install of Leopard. The install went smoothly. I did an Erase & Install setup from a Leopard Upgrade disc (but already had Leopard on my system so upgrade verified OK). When I booted up for the first time, it appeared everything was working normally.
I went online, downloaded a couple pieces of software I frequently use, and then started to set things up. This is when I ran into issues. I could browse the web without a problem. I could set up email with POP access, but not IMAP. AIM with Adium connects just fine. Tweetie won't connect. Dropbox won't connect. It's like some ports are being blocked, but others aren't, and I can't figure out why.
I have tried/verified:
OSX firewall is off
Restarted router/cable several times
iBook is in router's DMZ- outside of router firewall
Repaired permissions
Reset PRAM
Anyone have any suggestions or other troubleshooting ideas?

Here are the steps to selling*:
http://www.macmaps.com/selling.html
Mac Pros that shipped with Leopard should install from the Mac Pro labelled discs. Those that came with pre-Leopard, you should still include the Mac Pro discs, though if you desire to install Leopard on them, you should also include the Leopard discs that are retail. Leopard retail looks like * and do not say Upgrade, DropIn, or OEM.
- * Links to my pages may give me compensation.

What happens if i boot with windows an install a new version of windows on mac book pro ?

I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?

majid khalili wrote:
I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
Give your previous partition layout, you cannot install Windows via Bootcamp, unless you are willing to give up all your extra partitions and go back to EFI, OS X and RecoveryHD only configuration.
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?
1. Windows installer will not work and you will end up with driver issues.
2. No.
3. You cannot, but if you could, the Apple Bootmanager would be your Boot Manager/Loader.

HUGE issues with I Pod Touch and new software

Christmas Day I opened I tunes to load some new CD's for my hubby and I. It said I needed the new I Tunes, so I downloaded it. Procedeed to get CD's loaded and plugged in hubby's I pod (it's about 6 years old and wheel style) it synced and was done in no time. I then plugged in my 3 year old I pod Touch, the system said it too needed an update, so I procedeeded with the IPod update. Towards the end, it said it was unable to complete the update (error 1602 and again later error 1604). It then locked up the Ipod and wiped it out. I have spent 2 days doing ALL the various steps I can find ANYWHERE to fix the error. The forums ALL say it's my computer and USB issues. I have done ALL the steps numerous times to "repair" the issue with NO luck it still says error 37 when I try to install the USB driver ( the port is an "enhanced" 2.0 port). I took the same cord and I pod downstairs to my daughters comuter that is running a version of Itunes 10.5.1 I think, It restored my I pod to the factory settings and it now turns on and has all the information to start to configure it again. So, took it BACK to my computer thinking that now the restore/update is complete that my computer should "see" the I pod again. NOPE! It still has the SAME problem. I have tried to install an older version of Itunes and it will not let me as the library has been "created by a newer version of I tunes". I am NOT a computer person at all and all the items I've tried have NOT worked. It is obviously NOT my comupter having USB issues as my daughters much older computer not only found the Ipod, but was able to restore/update it. I HAS to be the new ITunes 11.1 version. I have over 2500 songs on my I pod and depend on it at work as I have no radio reception.
I am at my wits end and very angry.
I run Windows XP on an older computer, but as I mentioned, my daughters older version of I tunes not only found the I pod, but restored it and updated the software. I want MY Library back on MY I pod so I need to use MY computer.
Any SIMPLE easy to follow ideas to fix this once and for all would be greatly appreciated. I have done all the USB steps and uninstalled/reinstalled and did the recovery mode and all those steps so many times. It still won't read the "driver" on the I Pod touch.
Thanks for any help.

I guess it's 4th Generation, I have no idea, it's a 32G and I've had it 3 years now.
Her computer runs Windows XP as well. It's an even older computer, the ONLY difference is that I did NOT update ITunes to her computer. Problem is, MY library is on MY computer.
I know it's an issue with I Tunes itself based on the fact my husbands older I pod will sync just fine to our library after th new I Tunes updates. It is JUST my Ipod touch.
I cannot go back to an older version of Itunes either because the library was "created in a newer version"

Issue with running redistributeactivedatabases.ps1 in new-pssession

Hi,
I am stuck with the issue to run redistributeactivedatabases.ps1 in new-pssession.
Is there any best pratice or some other script to redistribute the mailbox databases using new-pssession

Hi Jrv,
I am sorry for not being very clear.
Also i know what i am trying is not very sane but i cannot help it as i got order that i have to achive this.
Below are the exact suitation.
We have JP1 server (Automation) which we use to reboot/failover/failback.
I have to automate failover and failback scripts. I am able to achive failover part as it is simple command
Move-ActiveMailboxDatabase -server servername
and it is working.
For failback and automatic rebalance mailbox database according to the activation preference i am using below script which i have to run using cmd.
$mbxs =
Get-MailboxDatabase
| sort name
ForEach($mbx
in $mbxs){
    $MBdb=$mbx.Name
    $ServerHosting=$mbx.Server.Name
    if($mbx.activationPreference.value
-eq 1)
        If
($ServerHosting -ne $ActivationPreference.Key.Name){
            Move-ActiveMailboxDatabase $MBdb
-ActivateOnServer $ActivationPreference.Key.Name
-confirm:$False
But the problem i am getting is that script is not working when i am running this in cmd or in powershell.
But if i run the same script on Exchange server using Exchange Management shell then there are no issues.
So, i need your help so that i can run above script using cmd in new-pssession.
Hopefully i am able to make some sense now.

Issue with Generate Create Script in new ODT 11.1.0.5.10 beta

So I'm trying to determine if there's an issue with the Generate Create Script option in the new ODT 11.1.0.5.10 beta (when you right click on a table in Server Explorer).
The SQL create script that it generates lacks the slash between lines. For example I generated the create script for my User table and this is what was generated:
CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
BEFORE
INSERT
ON "DEV"."SYSTEM_USER_TB"
FOR EACH ROW
begin
select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
end;
In my new Oracle Database Project, if I right click on the script and select "Run" or "Run On", the script fails saying:
Connected.
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ERROR at line 2:
ORA-00922: missing or invalid option
If I then add, a slash between lines, the script runs successfully and creates the table/trigger and whatever else just fine. For example, I changed the above generated code to look as follows:
CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
BEFORE
INSERT
ON "DEV"."SYSTEM_USER_TB"
FOR EACH ROW
begin
select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
end;
So, does anyone know if this is a bug? Could I be missing an option to add in the slashes to the generated code? Is there an option to not require the slashes? Could there be another way to execute these scripts?
Seriously, I think I'm having deja vu from the last release of the Dev Tools: Generate Create Script creates scripts that won't run: ORA-00922: missing..
...except this time the documentation says I should be able to use the "Run" and "Run On" commands in the Oracle Database Project (see page 8): http://www.oracle.com/technology/tech/dotnet/pdf/ODT11_whatsnew.pdf
null

There are 2 issues in the generated script :
1. Missing semicolons at the end of the create stmts
2. Missing slashes
Both of these fixes will be available in the ODT 11.1 release.

Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

Photo Stream only handles images and your videos are not uploaded or shared with other devices.
Use iPhoto to import from your device. It can bring in the videos and image files.

Has Anyone experienced a problem with trying to install a new app or reload a purchased app? After I had upgraded my ipad to 6.01 started having problems with updating my apps. Kept getting unable to Purchase. Please try again later.

Any Help would be appreciated.

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Reader causing issues with dropped underscores in courier new font

When converting a microsoft word document in 2013 or 2007 to a PDF is causing issues with dropped underscores. It only seems to happen in courier new. For instance if I have _someCode, when converting this over to a PDF file I will sometimes see _someCode and sometimes I will see someCode. If I open this file in a different pdf reader then it looks correct 100% of the time. If I copy and paste into another application then the underscore shows. This is a major issue for people putting code into a PDF document as underscores are important and courier new is what we often use.

I love how quick you are to throw Microsoft under the bus. Often it is their fault. In this case I believe you are 100% wrong and absolutely short sighted to ignore this. As I said in my original email, which you apparently missed, I have tried this in multiple PDF viewers and Adobe Reader is the ONLY reader that misses the underscores. Foxit, PDF Exchange and Sumatra all render it perfectly. Adobe reader missed 6 underscores in my document that has 18 underscores. 30% of the time in this document Adobe Reader makes the underscore invisible. And if I switch the zoom to 100% instead of 148% (which is the default for me for some reason) then Adobe Reader misses 7 of them. This doesnt occur in the other readers. Blame Microsoft all you want but the simple fact is that Adobe Reader has issues reading courier new's underscores. It needs to be fixed.

Activation/Deactivation issues with CS 6 install on new PC

Similar Messages

Maybe you are looking for