Activation error in ODS:URGENT

Hi All !
The data was loaded successfully to ODS but there was activation failure due to Communication error ( RFC call ) occured .
Moreover , it is saying ..Request REQU_1W740A2GOY7338IOPKOF2VC4F , data package 000001 incorrect with status 9 .
Could tell me the reason ? And some more details about status . Sometimes it is giving Status1 , 2 , 9 . What does this mean ?

Hi Rajib Goon
Just rerun the Activation Job Since its succesfull up to loading . If not just make
the Qm status in to manuall red though its in red and then just reschedule the
INfopak .Be fore rescheduling make just have a check reg RFC connectivity from u
r Basis Team.
Thanks & Regards
R M K
**Winners dont do different things,they do things differently**
> Hi All !
>
> The data was loaded successfully to ODS but there was
> activation failure due to Communication error (
> RFC call ) occured .
>
> Moreover , it is saying ..Request
> REQU_1W740A2GOY7338IOPKOF2VC4F , data package 000001
> incorrect with status 9 .
>
> Could tell me the reason ? And some more details
> about status . Sometimes it is giving Status1 , 2 , 9
> . What does this mean ?

Similar Messages

Activation Error in ODS

HI Gurus,
I have a typical scenario.
I am loading data into ODS.The data loads get completed but activation is failing.Giving no error.
At the same time data is getting reportable, but when I check into the active data table, the number of records is 0.
I tried to force it green so that I can carry out manual activation,but the status(both QM & Technical) is not changing.
I tried deleting & loading the data again.NO success.Is it some BASIS issue?If yes, then plz let me now the probable solution.
Plz help.

Hi,
when you go for manual activation
Go to ODS Manage screen
Click on activate button
you will get the POPUP
where you have the Button Job Overview
Select that and look for the Job log
try to find at which step it is getting failed
if you can solve it
Please past the Log here
we will try to provide the solution
Regards
Hari

Activation Error in ODS - Record mode 0 unknown (data record REQU_4DPGJKCKN

I created a generic extractor in R3 with a generic delta. In BW, my delta init loads with no errors but when I activate the data in the ODS, I get the activation error.
"Record mode 0 unknown (data record REQU_4DPQ31IK7WM9OTK26S5JMJ6LM/000001/"
I searched SDN but didn't found anything, and I searched help but only found general information about 0recordmode.
Can someone provide a solution and/or some more detailed information about the error message?
Thanks

Hello,
When you have created the InfoSource for the generic datasource, have you added field 0RECORDMODE to the InfoSource? When loading data to a ODS, 0RECORDMODE is essential.
The InfoObject is usually mapped to ROCANCEL (Indicator: Cancel Data Record) field of the extractor. This field is usually present in Standard extractors. But even if the field is not present in your extractor, add it to InfoSource Communication structure and leave it unmapped in transfer rules.
I think this might solve the problem.
Regards,
Pankaj

Activation error in ODS 0FIGL_O02

Hi,
I am facing one problem in my BIW that daily the activation of the ODS 0FIGL_O02 is failing. Daily I am activating the data using the program RSODSACT1.
It is included in the process chain.
Please help me to remove my manual work for activation tha data of the ODS.
Thanks,
Nitesh.

Hi,
You can give this a try:
uncheck the "Activate ODS object data automatically" setting in DSO, and include the DSO data activation step in the process chain. this will the serailize the process and hope fully solve your issue.
Hope this helps...
Regards,
Umesh

Activation error in BI, Urgent plz

Hi
I created the custom data source for RORQSTPRMS table in source system ECC 6.0 by selecting required fields in datasource and replicated to BI 7.0.
When i try to activate the data source it shows the error as
Field DATAPAKID ( Position 2 ): Invalid field name
Message no. RSDS039
Can any one provide the solution for it. I have seen the previous forums but i haven't found any solution.
Thank you.
Edited by: Srikanth.T on Nov 16, 2011 11:35 AM

Hi Srikanth
I tried below steps and was able to create and extract data from DataSource.
RSO2 --->Selected "Master Data Attributes " -
> Put a name "ZBI_TEST" --->Press Create button -
>Selected Applcation Component -
>Entered Short Medium and long description --->Put RORQSTPRMS in the "View/Table Name" field -
>Save.
I can see these steps are creating DataSource with Extract Structure.
Are you following these steps? When you say you have a Genereic DataSource , either it can be based on Table/View , InfoSet Query or Function Module? What you are using here?
Regards
Anindya

ODS activation error after the structure change

Hi all,
      I am getting a short dump with " "DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC " error when I am trying to activate an ODS after changing its structure. Do I need to change any setting before loading the data in to the ODS after adding few more fields to it. Exact error says
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"ACTIVATE_SIDS" "(FORM)"
Thanks

The above-described symptom is due to a program error during the transfer of error messages. The problem can occur, for example, if a hierarchy is activated during the activation of an ODS object.
If the indicator 'BEx Reporting' is set for the ODS object, entries are created in the SID tables of characteristics involved during the activation of requests for this ODS object. Newly-created SID values must then be inserted into hierarchy tables. This is not possible for reasons of consistency if a hierarchy is activated at this time. The RRHI_CHAVLS_REQUEST_TO_HIERA function module is used for inserting newly-created SID values in hierarchies.
To simplify the search for the cause of the problem, additional error messages are now displayed in the monitor. If the problem is triggered, for example, by the simultaneous activation of a hierarchy, the error message RH 14 is issued. As described in note 717967, this error message contains the name of the affected hierarchy. If the activation of an ODS object is cancelled due to a serious error, this now also causes additional entries in the log of transaction SM21 (Syslog). These entries start with the character string '> RSDRO':.
Solution
BW 3.0B
           Import Support Package 21 for 3.0B (BW3.0B Patch21 or SAPKW30B21) into your BW system. The Support Package is available whennote 0679665 with the short text "SAPBWNews BW3.0B Support Package 21", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 15 for 3.10 (BW3. 10 Patch15 or SAPKW31015) into your BW system. The Support Package is available when note 0601055 with the short text "SAPBWNews BW 3.1 Content Support Package 15" is released for customers.
BW3.50
           Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available when note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, is released for customers.

Error in ODS activation/export datasource

Hello Gurus,
When I am activating an ODS 0CFM_O01, it gives the foll error. can u pls guide. thanks in advance
DataSource 80CFM_O01 does not exist in source system BWCLNT700 of version A
Error when creating the export DataSource and dependent
Error when activating ODS Object 0CFM_O01
rgds

hi,
take a look oss note 597326-Activating ODS: Error when creating the export DataSource.
base on that note, the activation error coz dependent object(s)-infoobjects not active, to eliminate the error we have to first have all the objects active. you may try in business content installation, collection mode 'manual', put 0CFM_O01, grouping 'only necessary objects', right click 0CFM_O01 and choose 'install all below' then 'install'. hope this helps.
note 597326
Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

ABAP/4 processor: RAISE_EXCEPTION error while ODS Activation

Hi all,
We are facing the problem with ODS Activation.
While ODS activation, we are getting error - "ABAP/4 processor: RAISE_EXCEPTION" very frequently .
Could anybody please guide me why this error happened and how we can recover this error and is there any precautions to avoid this error.
Thanks & Regards,
Sudharsan

Hi Sunil,
Thanks for your reply.
I dont have much knowledge on ABAP and how can you please let me know how this error resolved by your ADMIN team.
Since we are facing this problem frequently, anybody tell me atleast, why this error happened?
Regards & Thanks
Sudharsan

ODS Activation Error:characteristic 0CALMONTH is not plausible

HI,All:
i have upload data from flat file to ODS successfully,but i am get following error when i try to activation data in this ODS.
- Error getting SID for ODS object ODS_DX01
- Value '000120' of characteristic 0CALMONTH is not plausible
- Error when assigning SID (details in long text)
- Activation of data records from ODS object ODS_DX01 terminated
How should i get rid of this error. Any idea would be appreciated.
Regards
Jerry

Hi Sandeep,
Appreciate if u dont copy other posts..and use it as ur own..!
ODS Activation Error
(u can freely post a link to other's posts..with due credit to the author)
Vishvesh
Message was edited by:
Vishvesh Bahirat

Error during ODS activation- request deletion

Hello Gurus,
We had a problem during ODS activation, could you please help?
We are on BW 3.1
Activation of an ODS failed with the message, "Fiscal year variant MC is not maintained for calendar year 2009u201D, u201CError getting SID for ODS object ZODS_O02u201D and u201CError when assigning SID: Action VAL_SID_CONVERT table 0FISCPER."
The expected data for 2009 didn't arrive, so the activation step in the proces chain has failed.
What I've done is, just deleted the request from the ODS.
But while this job was running, there was a short dump, and the same job was shown as cancalled under SM37. Though the request was successfully deleted from the ODS, it is showing as cancelled in SM37.
I've given below the log details of the job.
Job started
Step 001 started (program RSDELPART1, variant &0000000003334, user ID ABCD)
Delete running: ODS object ZODS_O02, from 310,818 to 310,818
Delete is scheduled; Selection conditions were substituted
Request REQU_4AZBURUGR09EXTAS8A9IRZUI4 successfully deleted from ODS object ZODS_O02
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled.
Could you please clarify the reason for the short dump and for the job getting cancelled?
thanks in advance,
Raj

Hi,
As an help i suggest you can first check the corresponding message for the "Message type X" in transaction se91.
Follow the below procedure for the same :
1.Execute ST22 > Double click on any entries
2.Go to Source Code Extract
3.Locate u201C>>>>u201D and you will see Message
i.e Message X041 (XX) in this example.
- XX is the message class
- 041 is the message class no. in the example above.
4.Now open SE91.Enter the details we found from Source
Code extract in ST22.Click Display
5.Find the corresponding message.
May be the message could much more elaborate your problem so it could be handeled properly.
Thax & Regards
Vaibhave Sharma

DBIF_REPO_SQL_ERROR short dumps while activating data in ODS

Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error          DBIF_REPO_SQL_ERROR
Date and Time          08.01.2008 13:01:08
     1. A printout of the problem description (short dump)
        To obtain this, select in the current display "System->List->
        Save->Local File (unconverted)".
     2. A suitable printout of the system log
        To obtain this, call the system log through transaction SM21.
        Limit the time interval to 10 minutes before and 5 minutes
        after the short dump. In the display, then select the function
        "System->List->Save->Local File (unconverted)".
     3. If the programs are your own programs or modified SAP programs,
        supply the source code.
        To do this, select the Editor function "Further Utilities->
        Upload/Download->Download".
     4. Details regarding the conditions under which the error occurred
        or which actions and input led to the error.
     Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
     Please check the entries in the system log (Transaction SM21).
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     use the following search criteria:
     "DBIF_REPO_SQL_ERROR" C
     "SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
     "CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
    SAP Release.............. "640"
    Application server....... "psapdb"
    Network address.......... "158.58.65.11"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "00CD615C4C00"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 22
    Short dump setting....... "full"
    Database server.......... "psapdb"
    Database type............ "ORACLE"
    Database name............ "BWP"
    Database owner........... "SAPBWP"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "Oct 29 2006 20:49:57"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
    Patch level.............. "155"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
    SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
    Client.............. 200
    User................ "R3REMOTE"
    Language key........ "E"
    Transaction......... " "
    Program............. "SAPLRSSM_PROCESS"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
     "CHECK_IF_ANALYZE_IS_NESSESSARY".
    The main program was "RSPROCESS ".
    The termination occurred in line 1143 of the source code of the (Include)
     program "LRSSM_PROCESSF04"
    of the source code of program "LRSSM_PROCESSF04" (when calling the editor
     11430).
    The program "SAPLRSSM_PROCESS" was started as a background job.
    Job name........ "BI_PROCESS_ODSACTIVAT"
    Job initiator... "RPRIYANKA"
    Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job:    BI_PROCESS_ODSACTIVAT / 02010102
Date       Time     Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05     SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.

The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem.

DSO Activation Error - While Installing BI Content

HI Friend,
    First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des

Process Chain: upload from PSA after activation of another ODS

Hi gurus,
i have a follow problem: for upload of ITM ODS i must before upload the HDR ODS. For the performance optimization of related process chain, the process:
1) upload of HDR ODS from 2LIS_02_HDR
2) upload of ITM ODS from 2LIS_02_ITM (ONLY PSA)
are PARALLEL process.
After activation of HDR ODS and upload of ITM PSA, with AND process, i upload data from ITM PSA to datatarget, but there is an process chain error:
"No ods activation process can be in front of process PSA read and update data target in the chain" !!
Could you help me?
Thanks in advance!
Bye!
Ferdinando

Hi,
Have you tried this format.
1. Upload HDR (PSA Only)
1. Upload ITM (PSA Only)
2. AND
3. Update HDR (PSA to DT)
4. Activate HDR
5. Update ITM (PSA to DT)
6. Activate ITM
With Regards

I am getting an activation error when trying to sign in to FAceTime

I am getting an activation error when trying to sign in to FAceTime

me too after upgrading into lion..

Error reading 'ods' passwd from wallet!!!!!

I did:
c:\>oidmon connect=hahldap start
(No errors).
C:\>oidctl connect=hahldap server=oidldapd host=192.168.1.100 instance=1 start
gsluwpwaGetWalletPasswd: Opening 2 file failed with error 11005
[gslusw]:Error reading 'ods' passwd from wallet
[gsdsiConnect]:Error reading 'ods' passwd from wallet
Could not connect to the Database.
What could be the reason??? I am running on WinXP Is it the problem?
Installation went fine for both Metadata repository and for the Oracle Internet Directory.
Note: I couldn't find the service OracleDirectoryService_xxx at all, does that mean the installation is incorrect?
thanks.

Any resolution here :
My listener is up
My DB is up and accessible, but when issuing the following command I get following error .
Any chance you can offer some advice ?
oidmon start
2006/03/01:12:58:32 * gsluwpwaGetWalletPasswd: Opening 3 file failed with error 11005
2006/03/01:12:58:32 * [gslusw]:Error reading 'ods' passwd from wallet
2006/03/01:12:58:32 * [gsdsiConnect]:Error reading 'ods' passwd from wallet
2006/03/01:12:58:32 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
Im on Unix

Activation error in ODS:URGENT

Similar Messages

Maybe you are looking for