Activation Link Does Nothing

I received my new iTunes U activation link this afternoon. When I click it, it launches iTunes but then does nothing. I don't see the setup page, it doesn't ask me for any other information, it just goes to iTunes and doesn't change pages or anything. Is it possible the link was sent before it was activated? Might it work tomorrow? Anything I can do? I'm at a loss, because it literally does nothing but launch iTunes.

Figured it out on my own. My default browser is Firefox, which apparently doesn't know how to handle the activation link. I copied the link and pasted it into Safari, which then opened the correct page in iTunes. I'm posting this solution because I imagine this will happen to other people and I've been unable to find a solution online.

Similar Messages

Using firefox, scrolling over a link does nothing, but using IE on the same link I see an .aspx file that I can open. How do I fix firefox?

Going to a state sponsored site I see a link (underlined and in blue), but scrolling over it while in Firefox does nothing. Clicking on the link also does nothing.
Changing browsers to IE, I then go to the same site and scrolling over link changes cursor. Clicking on the link opens a new page.
The link's address is an .aspx file.
How can I fix Firefox to view this link.

Thanks for the try, but no help.
I tried removing the "style", but it did absolutely nothing.
I did notice something odd.
Going to the state site:
http://ww2.doh.state.fl.us/IRM00PRAES/PRASINDI.ASP?LicId=295&ProfNBR=3101
there is a link "Going to complaint", when I scroll over this it reacts normally and clicking allows me to open a new page, BUT, the page is not in the browser, rather it appears to be a new window floating over the browser. This window has no address, it appears to be a separate document rather then a part of the website. In this window document there is a link, underlined and in blue, under the heading "case number". There is no way to remove style from this window, and clicking in Firefox does nothing, while doing so in IE leads me to a PDF document.
I am a neophyte computer user, but wonder if there is something additional needed so Firefox can handle the .aspx file.

Activation link does not work

When I click on the activation link (https://deimos.apple.com/WebObjects/Core.woa/Activate/montereylaw.edu/004d93af83 dc73e45cb47dc42255d0419e7c20295e55e41afe46dbbbdb28956715450886c5) I receive an error error message box that says, "We could not complete your iTunes store request. An unknown error occurred (-9812).
I tried the link from my work desktop, personal off network laptop (windows vista) and an iPad 1 and received error messages on all of them.
Any ideas?

The activation link appeared to work in our testing as expected, but for security purposes we have reset your site and sent a new site activation email. Site activation requires the iTunes application be present on the system in order to complete and it is not supported on an iPad.
-Thanks

M.youtube.com "Watch Video" link does nothing

I have a 8310 on AT&T running 4.5.0.110 OS. I have the BB browser selected with BB emulation and all option checkboxes selected. This was working but now when I click a link in m.youtube.com I get nothing. Nada. No reaction to the link being selected.
Thoughts?
thanks
john

just keyframe the y-position of the clip.
set the keyframe behaviour to linear.
Put another clip over the first one, do same... other direction.
A bit 'tricky'... but possible.

Firefox 5.0 for Linux: sometimes the middle button on a link does nothing, sometimes it opens the link twice - What can I do?

Hello,
I just updated Firefox from 4.x to 5.0 on Ubuntu 10.10 32bit.
Since then, the middle button of the mouse works erratically on links.
Sometimes the middle button opens a new tab with the link (which is correct), then replaces the current page with the link (which is not correct).
It was particularly annoying when I tried to bypass what looks like another FF5 problem: clicking on "next" or page 2, 3, 4... on a Google results page gives nothing. Clicking with the middle button opens the page in a new tab... but also replaces the current one. Refreshing the page after clicking "next" or a page number seems to work.
Is it a bug or a config problem? What should I do from now?

Right click on the hyperlink and select “Open Link in New Tab," that will open a new tab and keep you from getting a blank page like most people get. I don't know why they changed this option. If you don't want to do that every time you can change it in the config.
1. In Firefox, type about:config into URL Location bar.
2.Click on I’ll be careful, I promise! button.
3.In the filter text box, enter the following text string with no quotations :
''''''browser.tabs.insertRelatedAfterCurrent''''''
Alternatively, manually locate the preference name above.
4.The default boolean value for the browser.tabs.insertRelatedAfterCurrent is “true”. Double click on the browser.tabs.insertRelatedAfterCurrent to change its value to''' false'''.
5.Close the tab, and the change will take effect immediately.
Hope that helps some people..

Google is NOT WORKING with Firefox 3.6.8, you can type in & Search but clicking on next is a dead link; does nothing?

Google is NOT working on Firefox 3.6.8, suddenly today. You can type in search and get results on initial page. Clicking on 'next' link or any number links is dead. Yahoo & Bing seem to work. I do not have a Google toolbar. Very frustrating. This suddenly happened today. Please check into it.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

New password email link does NOT go anywhere. I still cannot login.

Have forgotten my Password. It asks for email address. It says it has sent an email with a link. After some hours I get an email with a link but the link does nothing.
I still cannot log in !!!!

Check: Settings - General - International - Calendar - Gregorian.

Clicking on link in dynamic document does nothing

Hello my friends,
I Add link to my dynamic document but when I press on the link it does
nothing. I create event handle class and connected it to the link and
it still did not work.
Please help me if you can, its urgent.
Regards,
Eitan Iluzz.

Try this: http://helpx.adobe.com/creative-cloud/help/launch-creative-cloud-apps.html

Clicking on links in Safari does nothing

Running OS 10.8.5 on desk top iMac. Lately, today, have found that clicking ona link in Safari does nothing. Simply stays on the same page I was viewing.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

Holding ctrl when clicking a link doesn't open it in a new tab; does nothing

When I try to open a link in a new tab by holding down ctrl while clicking, it does nothing. Doesn't open at all. Have tried restarting in safe mode with add-ons disabled and had no joy.
Also getting no menu when using right click, also tried in safe mode, also nothing.

Should add that holding ctrl works from the bookmarks toolbar, just not in webpages themselves

Does jDeveloper support activity links?

I have tried jDev 10.1.3.3 as well as 11g tech preview 4.
Does jDeveloper support modeling of activity links? I can't seem to find that anywhere. An example of how links are used:
<flow ...>
<links>
<link name="checkFlight-To-BookFlight" />
</links>
<documentation>
check availability of a flight, hotel and rental car concurrently
</documentation>
<invoke name="checkFlight" ...>
<sources>
<source linkName="checkFlight-To-BookFlight" />
</sources>
</invoke>
<invoke name="checkHotel" ... />
<invoke name="checkRentalCar" ... />
<invoke name="bookFlight" ...>
<targets>
<target linkName="checkFlight-To-BookFlight" />
</targets>
</invoke>
</flow>
An article http://www.it-eye.nl/weblog/2006/10/20/benefit-from-concurrent-flows-and-activity-links-in-bpel-ws/ mentions that "Oracle BPEL designer (JDeveloper plug-in) doesn’t support it yet, although it is supported run-time by the Oracle BPEL engine". The article is from 2006, is this still the case?

Yes. You just can't use the YouTube widget. You need to go to the Youtube page and get the embed code and add that to the standard HTML snippet in iWeb.
OT

When I try to access an active link from a website (usually a pdf file), the new tab opens and is labeled correctly; the word "done" appears at the bottom; but the page does not open or download. The same problem does not occur with Chrome.

Example: on the home page of the website http://www.dot.ri.gov
there is an active link entitled "Overview of all Iway changes - Fall 2010"
Clicking on it exposes the following url:
http://www.dot.ri.gov/documents/iway/Iway_Changes_Fall2010.pdf
However, the tab remains blank, even though it says "Done" in the bottom left corner.
When I use Google Chrome as a browser, I have no problem opening that url.
This has occurred numerous times over the past several days on several different sites--and usually the link that will not open is a pdf file.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

PRE 9--clicking on buttons in New Project screen does nothing

This is strange. PRE 9 had been working fine. Now, when I launch the program and the New Project window comes up asking me to type in a name, indicate where it is being saved to and to change whatever settings I must, I cannot do any of these. I cannot type in a name and clicking on the buttons does nothing. When I hover the cursor over the buttons, the color shade changes as if everything is active but nothing happens when I click on the button.
I uninstalled and reinstalled four times.
Has anyone seen this before?
Thank you very much.
Alan Silberlight

More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

Activation Link Does Nothing

Similar Messages

Maybe you are looking for