Activation of an event in R3 after a file is posted

Hi experts,
I have some scenarios FILE to FILE (from Legacy to R3).
In order to process the data in target system, we used to schedule a job just after the file reached R3.
However we want to automatize the process.
So my question is: is there a way to raise an event (or whatever) in R3 from XI in order to let the program get the file without scheduling a job at any particular time?
And if so, how?
Maybe, 1 sender file adapter, 1 receiver file adapter and 1 receiver RFC adapter?? would it work?
Could you please send me some steps to do this?
Thanks in advance and kind regards,
David de Miguel

Yes... this will work,
There exists a few EVENTRAISE* function modules you could use.
If you can't get the BAPI one to work, you'd have to write your own RFC, call it from XI, then call the non-bapi one.
1) Setup the technical & business systems in the SLD for your R/3 system
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm</a>
2) Implement a version of the following ccBPM to call your RFC or the BAPI to raise the event... instead of BAPI_COMPANY_GETDETAIL
<a href="/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit:///people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Doug -

Similar Messages

Ical loosing events / reappearing later after Lion upgrade

Hi all,
This is a new one for me - now that we've upgraded our computers to Lion, we're seeing some weird activity on iCal. A newly added event will suddenly dissappear, then reappear later, and maybe go again again. We've got our calendars sync'd to Mobile-Me, and it's been working fine for quite awhile. Now suddenly we're seeing strange behavior - my wife spotted it first, adding an event she needed for the next day, then not spotting it a few hours later. She added it again, and then after awhile, BOTH appeared. For me, I've got an app that adds events automatically, and I actually watched it appear on iCal, and less than 20 seconds later, it vanished! I hit refresh, and refresh all, to no avail. THEN I added the event again, and after a few seconds, BOTH appeared.
Anyone else seeing such weirdness? We sync both our computers, iPhone, and iPad via Mobile me. I searched this and other forums, and though I found a few similar threads with sync problems with external calendars (google, et.al.), nothing shows for all-mac problems.
many thanks,
dm

Rob -
doesn't always work for me - yesterday i added an event, then modified it (title and set all day) then done, and it vanished. added another and IT vainished too quickly to edit. BusyCal showed both, mobile-me showed both (syncd on ipad/iphone showed both) just having problems on my local machine where i generate the events. same with my wife's computer, her events vanish, but show up on mine.
it's infuriating, since our business relies on these calendars. we've gone back to using paper ones until this gets fixed.
the scary thing is that it doesn't seem to be iCal - more the database iCal uses, calendarStore - because an app that lookes at that shows them missing, too.
Restarting the computer brings back the missing ones.

IPhoto events view broken after import, images missing

I'm running the latest iPhoto on a 10.8.2 Retina MacBook Pro and experience some strange import problems since the end of last month.
My library holds more then 26.000 images right now and whenever I try to import some new images by dragging them from Finder to the iPhoto library the images (and videos) get imported... but when I try to view the event afterwards it doesn't open and the scrolling of the complete events view is broken. The scrollbar moves but thumbnails of events don't! I'm not able to use the events view anymore after a try to open such broken event.
When I use the regular photos view (the 2nd item in the left menu) I can see and use these new images... until I quit and restart iPhoto. Afterwards many images are missing – see http://cl.ly/JrjF for an example. I can delete those broken events... but not empty the trash afterwards. It just hangs while purging all entries.
Has anyone experienced this already?
I'm importing iPhone images uploaded to the DropBox "Camera Uploads" folder. But I can't believe it has to do with anything related to this.
I've also disabled the Photostream feature (not the shared ones) in iPhoto because I got tired of splitted events due to Photostream missing some images now and then. Maybe it has to do with that disabled feature. I'll try to reenable it after restoring my 5 days old backup (120GB) a second time now.
Thanks for your help... let's hope I can solve this.

This sounds like a damaged database.
Try this test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it's not then back to your main Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Need BOR & event which triggers after vendor master change.

Hi all.
Can you pls let me know the BOR & event which triggers after vendor master change. (Xk02). I used tcodes SWELS (evetn trace) , and SWEL and changed vendor adress using XK02. but I could not find any event or BOR in the trace. Pls help me out.
Cheers,
sam.

Hi
when we change the vendor details we dont have the event which is automatically triggered by the system so we create an zbusinessobject as subtype for the vendor(LFA1) as supertype.
and create a new event in that z business object .
change document for the vendor is KRED you can check it in the CDHDR table by giving tcode name.
after finding changedocument object go to SWEC and create a newentry specifying your changedocumentobject name and BO name and event name and click on radiobutton onchange.
and now you can check whether an entry is getting in swels or not when changing the vendoor details.
Thanks.

How do I uninstall SyncMate Server, Activity Monitor shows it still there after appzapper uninstall of SyncMate app? Killing in AM proceeds with a SyncMate Server startup again??

How do I uninstall SyncMate Server, Activity Monitor shows it still there after appzapper uninstall of SyncMate app? Killing in AM proceeds with a SyncMate Server startup again??
Mavricks, MacbookPro, typical config of everything and standard business user, no heavy graphics, animation or media editing. MS Office, web apps, etc.
I have the same issue with Logmein, which I installed a trial, uninstalled with appzapper, which I thought does a good job of untangling the components of apps but for these 2 it doesn't. Any help would be greatly appreciated.
Thx,

Usually applications like these have their own uninstallers, either build into the installer ( ! ) itself or as a separate uninstaller app. Check the site of the software provider for instructions.
Here's the instructions for SyncMate: http://wiki.eltima.com/user-guides/syncmate-mac-os/uninstall.html
And LogMeIn: http://help.logmein.com/SelfServiceKnowledgeRenderer?type=FAQ&id=kA030000000DGF1 CAO&kw=

HT4623 i have sim activation problem in my i phone after updating

i have sim activation problem in my i phone after updating

If the phone was unlocked by anyone other than Apple or the carrier it was locked to (that is, unlocked by hacking) then it will become locked to the original carrier when you update it.

EVENT FIRST COMMAND AFTER SELECT

Dear friends
I'm now using Gemalto Developer's Suite and I want to test this event. However, I try different ways but fail to accomplish my test.
Do you know any materials, or just anything about this event? I searched throughout various sources, materials but all I have now is a small piece of information in GSM 43.019
Upon reception of the first command received by the GSM application after it has been selected or after the ATR if it is the default application, and before the Status >Word of the processed command has been sent back by the GSM application, the toolkit framework shall trigger all the toolkit applets registered to this event.
If the first command received by the GSM application is a toolkit applet triggering command (e.g. TERMINAL PROFILE), the toolkit applets registered on the >EVENT_FIRST_COMMAND_AFTER_SELECT event shall be triggered first.
The ProactiveHandler and the ProactiveResponseHandler shall not be available at the invocation of the processToolkit method of the toolkit applet on the >EVENT_FIRST_COMMAND_AFTER_SELECT event.From this material, I think it's quite vague to understand clearly this event.
Thanks in advance,
Jason
Edited by: Jason Gosling on Oct 19, 2011 7:29 PM

hi Jason.
This is automatic event that was born by OS instead mobile.
When OS received the first command "00 A4 04 00 00 0xXX + AID APPLET GSM" from User, OS will look in the ToolkitApplet Registry table and find the applet with EVENT FIRST COMMAND AFTER SELECT, then OS call method "process toolkit" of this applet.
the called applet will do something that it want. Maybe send data to ME.
When method done, OS continue action normally.
This is for GSM applet on JavaCard. And the GSM applet is not default program.
For the case: GSM is default, that mean OS automatic select GSM APPLET when it starts, no need to any command form ME or User, OS auto create this event and look toolkitapplet to run processToolkit method.
hope this is fun !!

If the flash object is placed in 0px div, the creationComplete event is fired after a long wait time

<Problem>
My requirement is to hide flash object on browser. However, If the flash object is placed in 0px div, the creationComplete event is fired after a long wait time. Is this a bug of Flex? (or Flash Player?)
<Sample Code>
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
          initialize="app_initialize(event);" creationComplete="app_creationComplete(event);" >
<mx:Script>
        <![CDATA[
        import mx.events.FlexEvent;
    private function app_initialize(evt:mx.events.FlexEvent):void
              ExternalInterface.call("alert", "application initialize.");
    private function app_creationComplete(evt:mx.events.FlexEvent):void
              ExternalInterface.call("alert", "application creation complete.");
    private function button_creationComplete(evt:mx.events.FlexEvent):void
              ExternalInterface.call("alert", "button creation complete.");
        ]]>
    </mx:Script>
    <mx:Button id="testButton" label="button" creationComplete="button_creationComplete(event);"/>
</mx:Application>
<Steps to reproduce>
1) Dowload the following samples
MySwf-src.zip
https://files.acrobat.com/a/preview/c6b7a191-c6c4-486f-9345-e2b5c21a4c0b
TestSwf.zip
https://files.acrobat.com/a/preview/98e613e1-63b1-4b2f-93f3-f6e4f4a27f24
2) Unzip TestSwf.zip.
3) Copy MySwf.swf, TestInvisible.html, and TestVisible.html to "c:\inetpub\wwwroot\". (Need to install the IIS.)
4) Visit "http://localhost/TestVisible.html" via IE. notice the creationComplete event fired after initialize event immediately. -- Correct
5) Visit "http://localhost/TestInvisible.html" via IE. notice the creationComplete event fired a long time after initialize event. -- Incorrect
<Environment>
Win8.1x64+IIS8.5+IE11+Flash player(13.0.0.182)
<Note>
If the flash object is placed in 1px or larger div, the creationComplete event is fired immediately.
The problem occurs with other browsers(IE9,IE10,FF,Chrome) too.

Thank you for your response. The computers are indeed running Flash Pro CC 13.1.0.226. I tried to generate a minidump file on four different computers where Flash Pro hung, but was not able to do so on any of them as Flash Pro makes the entire system unresponsive. I get the spinning circle cursor and then the GUI of all apps greys out and fails to update. I don't actually get any sort of error message; everything simply stops responding.
I was probably unclear above; even if I can alt-tab I can't really interact with any other programs once Flash Pro hangs beyond one or two mouse clicks. So on some computers I could right-click on the process in Process Explorer and choose to create a minidump, which then froze, or I might right-click on the process and have it immediatly freeze. I've experienced about two dozen crashes and I've never been able to really use another program or even kill the Flash process in task manager. I also have to power off the computer by holding down the power button, since while I might be able to open the Start menu I can't reach the point of being able to shut it down without it freezing.
From what I was able to see in Process Explorer, Flash Pro was using <1% CPU and 120M private / 170M working memory.

Cancellation Error during Internal Activity Allocation in Event Management

Hi,
we use Internel Activity Allocation in Event Management.
The User wanted to cancel a document, so he did.
But now the status is (red-lihted) "Error in doc. cancellation 1".
Our systems, R/3 and HR, are located on the same server.
How could I cancel the document now?
Do I have to post the same negative worth in CO?
Greetings,
Philip Beilharz

Hi,
I have resolved the above error. it was due to master data maintainence.
But now while posting i am getting an error that " Activity type XYZ can not be allocated to 2008"
Can someone help with this?
Regards
TS

My calendar events are dropped after the month is over. How can I stop that from happening?

My calendar events are dropped after the month is over. How can I prevent this from happening?

Settings > Mail, Contacts, Calendars > [scroll way down to the Calendars section] Sync = "All events"

[svn:osmf:] 15527: Fix bug FM-696: Capability change events being dispatched after the trait to which they refer has been modified .

Revision: 15527
Revision: 15527
Author:   [email protected]
Date:     2010-04-16 17:21:06 -0700 (Fri, 16 Apr 2010)
Log Message:
Fix bug FM-696: Capability change events being dispatched after the trait to which they refer has been modified. Updated unit tests.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-696
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayer.as
    osmf/trunk/framework/OSMFTest/org/osmf/media/TestMediaPlayer.as

Major Update: The G-Keys can now be edited without recompiling by editing shell scripts at "/usr/share/g15daemon/macros/"
Each button has it's own script file named by it's label (e.g. to edit the functionality of G1, open the script named G1.) The button will try to execute the scripts as programs, so make sure they are executable (chmod +x) and as long as the name remains the same, if you want to replace the files with something different, know that the arguments currently given to the files ($1 and $2) are ($1)on/off and ($2)0-2 (where 0 is M1 and 2 is M3)
To download the updated sources, go here (only the g15daemon source/patch was updated). This thread's OP has been updated.
Last edited by rabcor (2015-02-12 04:46:48)

How to tackle the dataflow problem when Value Change event always triggers after another GUI event

We know that Value change event always triggers after another GUI event. Eg, the user modifies string control, the user clicks on a boolean control. Then event boolean clicked is triggered before event string control value change.
Now suppose somehow the GUI event that must happen to subsequently trigger the Value change event can potentially affect the data that Value change event is supposed to work on. How can we tackle this problem ?
For example, in a mockup application that the grand purpose is to have user entered values in a textbox logged to a file (no missing information is accepted, and there is a boolean to determine how the information is logged).
There are 2 controls, boolean A when clicked (mouse down) will load random number in text box B. Text box B is designed with event structure VALUE change which saves whatever values user enters into text box B to a log file.
There are 3 problems when instead of clicking anywhere on the front panel after modifying text box B, the user ends up clicking on boolean control A.
1. Event mouse down on Boolean control A will execute first, modifying text box B content before the user entered values in B get saved.
2. The value of boolean A can potentially affect how textbox B is loggged.
3. The value of boolean A affects how the file is logged and this is indeterminate. Somehow when running this VI with no Highlighting, the textbox B Value change event executes -before- boolean A value is updated (F to T). When running this VI with Highlighting, the boolean A value is updated (F to T) (because we click on it) -before- textbox B value change event occurs. Why is it like this ?
Now the situation I made up seems non-sense, but I believe it resembles one way or another a problem that you might run into. How would you solve this problem elegantly ?

You can set the string control to "update while typing".
Are you sure appending the log to itself is reasonable? Wouldn't it grow without bounds if the users keeps entering strings or pressing the ingore button?
Why isn't the "constant" a diagram constant instead of a control. Is the user allowed to change it?
To reset just write empty strings or a false to local variables of the controls (renit to defaults" seems a bit heavy handed).
All you probably need is a single event case for "ignore:value change" and "String" value changed", no need for the local variable..
Also add a stop button and an event for it.
You don't need the timeout event.

Account locked out events are not getting in active directory security event logs

Account locked out events are not getting in active directory security event logs for some users. I can see that the user is locked and when i tried to find out the event in sec log at DC but couldnt able to find. It is only happening for some users.
not for the all users.

In addition.
Check the ADDS Audit.
Active Directory Services Audit - Document references
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

Active Directory user passwords on mobile account with File Vault

Hi all,
I enabled file vault when I moved to my MacBook Pro. I joined the computer to the domain (after enabling file vault), and logged in with my domain account, creating a managed, mobile account so that I could use the computer when not connected to the domain.
Active Directory has forced a change in my password for the domain account but I cannot get the password on the Mac to change the password and sync with the domain.
My account (the one with the changed network password) on the Mac is a standard user account. When I open system preferences, go to Security & Preferences, General, click on the lock to unlock and allow change and then click Change Password ..., I receive the following error message after going through the steps to change the password:
The password for the account "user" was not changed. There was a problem with your password. It's possible your system administrator doesn't allow you to change your password. Contact your system administrator for help.
For Old Password, I used the old network password, the one that I use to log into the Mac. For New Password, I used my new, current password.
The same result happens when I attempt to change the password from the Users & Groups section of the System Preferences.
I have logged out and logged in with the user account that is identified as the admin and get a similar (same ?) error when attempting to change the password.
Any suggestions? How do I get the passwords to be one so that I can forget the old password?

Thanks for your insights.
The Tech Tool report happened after AppleJack, and never showed up before that. Restarting again just now, it showed up again.
I had not emptied the trash, but did now, and the 'get info' on my hard drive still shows that I have used nearly all of my 160 GB.
Re Disk Warrior: I do have it and just ran it. I emptied trash again and checked to see available disk space: I have 2.47 GB, so the problem still exists.
Here is the disk warrior report for the first part of its tests:
DiskWarrior has successfully built a new optimized directory for the disk named "Hildegarde." The new directory is
ready to replace the original directory.
There is not enough contiguous free space for a fail-safe replacement of the directory. It is highly recommended that
you create 204 MB of contiguous free space before replacing the original directory.
All file and folder data was easily located.
Comparison of the original and replacement directories indicates that there will be changes to the number, the
contents and/or the attributes of the files and folders. It is recommended that you preview the replacement
directory and examine the items listed below. All files and folders were compared and a total of 14,627,488
comparison tests were performed.
• Errors, if any, in the directory structure such as tree depth, header node, map nodes, node size, node counts, node
links, indexes and more have been repaired.
• 1 folder had a directory entry with an incorrect custom icon flag that was repaired.
Disk Information:
Files: 552,652
Folders: 131,014
Free Space: 2.47 GB
Format: Mac OS Extended
Block Size: 4 K
Disk Sectors: 321,410,736
Media: HDT722516DLAT80
Time: 11/28/08 6:54:19 PM
DiskWarrior Version: 4.1

Trigger a background job immediately after a file is placed in App Server

Hi all,
I have a program ZPGM1 that needs to be executed in background when a file is placed in an application server.
I know i can schedule ZPGM1 to trigger in background after an event say ZEVENT1.
Also i know i raise the event ZEVENT1 using FM BP_EVENT_RAISE but my problem is who would raise the event.
The file is being dropped in application server at random time by 3 party vendor. I need to execute my ZPGM1 immediately after the file is placed in Application Server.
Is ther a way that this can be achieved. Let me know
Thanks
Kajol

You will need to develop a custom, non-SAP "listener" program or a script. This program/script will need to check if the file is present (e.g. by using an OS-level event) and, if so, start SAPEVT.EXE program with corresponding parameters.
SAP Help on raising events externally:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e6b543b11d1898e0000e8322d00/frameset.htm
There is also third-party software available, but it is very expensive:
http://www.redwood.com/

Activation of an event in R3 after a file is posted

Similar Messages

Maybe you are looking for