Activation of BEx History failed during SPRO setting

Hi,
I was getting error message saying that "Activation of BEx History failed".While configuration setting in SPRO
After upgrade system from BW 3.x to BI 7.0
I was getting the error message during setting in SPRO
Please some one would provide me answer.

The error is due to authorization.
You must ask your BASIS guy to open up the server to allow changes.
Once the BASIS did that, just rerun the TCode and it will works correctly.
Hope it helps.

Similar Messages

Error when activating the BEx history

Hi,
When I am trying to activate the BEx history through transaction 'RS_PERS_ACTIVATE', I am getting the error saying 'Activation of BEx History failed'. Then when I checked the DSO '0PERS_BOD' it is inactive also the corresponding table '/BI0/APERS_BOD00' not exists in data dictionary table. Because of this I am getting Error message while opening the BEx analyzer saying 'serious error occured while reading history folder'. So kindly suggest me in making the DSO '0PERS_BOD' active. I hope this will solve the problem.
Thanks in advance,
Steve.

Hi,
'Version A of DataStore object 0PERS_BOD does not exist' is not the estimate message.
1. RSA1
2. BI Content
3. Object types
4. grouping -> only necessary objects
5. data store object -> select object
6. search to "0pers_"
7. mark "0PERS_BOD", "0PERS_VAR" and "0PERS_WTE" -> Transfer Selection
8. Install
Sven

Activation of BEx Web History Failed

Hello All,
I am currently performing the BI-JAVA Portal integration.
I am faced with an error while running the report RS_PERS_ACTIVATE. I got this error message:
Job started
Step 001 started (program RS_PERS_ACTIVATE, variant &0000000000000, user ID DDIC)
STDO: Log could not be written on output device T
Replication completed successfully
Communication Structure /BIC/CS80PERS_BOD activated
Activation of BEx History failed
Job cancelled after system exception ERROR_MESSAGE
The system is open for modifications and I have the SAP_ALL authorization.
Do you have ideas how to correctly activate the BEx History?
Thank you.
Best Regards,
Julius

Hi ,
Just have a look at these notes hope they may be helpfull.
Note 744009 - RS_PERS_ACTIVATE has incorrect initial display
Note 775214 - Personalization is not applied.
Regards,
Rahul.

What shall i do my iphone showing activation failed during startup?

what shall i do my iphone showing activation failed during startup?

Hi funkeyankey,
It sounds like your phone is not activating correctly when you are trying to set it up. I would recommend the troubleshooting from the following article named:
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
Restart the iPhone.
Try to reach the activation server another way, then try to activate.
Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
Try connecting to iTunes if you can't activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
Thank you for using Apple Support Communities.
All the very best,
Sterling

An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.

in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/

How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)

How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)
active-passive SQL server cluster setup failed due to some steps missed in initial cluster setup,
now i have unistall sql instance from nodes,
Your help will higly appriciated.
Regards,
Anish
Asandeen

Hello,
Please refer to the following link about remove a node of SQL Server Failover Cluster Instance:
http://msdn.microsoft.com/en-us/library/ms191545.aspx#Remove
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

HT201210 New iPad can't reach activation server during initial set up

During initial set up my new iPad could not reach the activation server

I wouldn't say that it is a common problem but it happens.
Are you using the cable and a connecting to iTunes? If the iPad2 came with iOS 5 on it then OTA activation is possible.
How are you trying to activate?

Loading Modules and Mounting Local Filesystems failed during boot

Hi all,
since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process).
[gianluca@gianluca-laptop ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
[ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
[ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
[ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Acer Aspire 1810TZ/JM11-MS, BIOS v1.3314 08/31/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7b8a0000 - 7ba50000
[ 0.000000] Allocated new RAMDISK: 3764e000 - 377fdbda
[ 0.000000] Move RAMDISK from 000000007b8a0000 - 000000007ba4fbd9 to 3764e000 - 377fdbd9
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 7bb8d000 00040
[ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1092MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bc00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ba60
[ 0.000000] 0: 0x0007babf -> 0x0007bb80
[ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
[ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 506587
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f66d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2185 pages used for memmap
[ 0.000000] HighMem zone: 277190 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502626
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 8109824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x98/0xb0()
[ 0.000000] Hardware name: Aspire 1810TZ
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
[ 0.000000] BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-ARCH #1
[ 0.000000] Call Trace:
[ 0.000000] [<c1046112>] warn_slowpath_common+0x72/0xa0
[ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c10461a2>] warn_slowpath_fmt_taint+0x32/0x40
[ 0.000000] [<c11e3dd8>] warn_invalid_dmar+0x98/0xb0
[ 0.000000] [<c14cba32>] check_zero_address+0x57/0x12b
[ 0.000000] [<c12250cd>] ? acpi_get_table_with_size+0x59/0xb3
[ 0.000000] [<c14cbb18>] detect_intel_iommu+0x12/0x78
[ 0.000000] [<c14ad67e>] pci_iommu_alloc+0x35/0x5a
[ 0.000000] [<c14b92c3>] mem_init+0xe/0x26d
[ 0.000000] [<c14c3396>] ? __alloc_bootmem_node_nopanic+0x72/0x98
[ 0.000000] [<c1342afc>] ? printk+0x1d/0x1f
[ 0.000000] [<c14c5183>] ? page_cgroup_init_flatmem+0x8f/0xbc
[ 0.000000] [<c14a85cc>] start_kernel+0x1a0/0x357
[ 0.000000] [<c14a81bd>] ? loglevel+0x18/0x18
[ 0.000000] [<c14a80b3>] i386_start_kernel+0xb3/0xb9
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
[ 0.000000] Memory: 1993572k/2027520k available (3376k kernel code, 32776k reserved, 1390k data, 512k init, 1117500k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.656 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.36 BogoMIPS (lpj=4322186)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003415] Security Framework initialized
[ 0.003422] AppArmor: AppArmor disabled by boot time parameter
[ 0.003458] Mount-cache hash table entries: 512
[ 0.003763] Initializing cgroup subsys ns
[ 0.003768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003772] Initializing cgroup subsys cpuacct
[ 0.003793] Initializing cgroup subsys memory
[ 0.003809] Initializing cgroup subsys devices
[ 0.003813] Initializing cgroup subsys freezer
[ 0.003816] Initializing cgroup subsys net_cls
[ 0.003819] Initializing cgroup subsys blkio
[ 0.003876] CPU: Physical Processor ID: 0
[ 0.003879] CPU: Processor Core ID: 0
[ 0.003883] mce: CPU supports 6 MCE banks
[ 0.003894] CPU0: Thermal monitoring enabled (TM2)
[ 0.003899] using mwait in idle threads.
[ 0.005672] ACPI: Core revision 20110316
[ 0.016682] ftrace: allocating 15225 entries in 30 pages
[ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056606] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073511] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100013] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
[ 0.100017] Booting Node 0, Processors #1
[ 0.100021] smpboot cpu 1: start_ip = 9a000
[ 0.006666] Initializing CPU#1
[ 0.196688] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203327] Brought up 2 CPUs
[ 0.203331] Total of 2 processors activated (5188.93 BogoMIPS).
[ 0.204780] devtmpfs: initialized
[ 0.204780] PM: Registering ACPI NVS region at 7bb80000 (258048 bytes)
[ 0.206812] print_constraints: dummy:
[ 0.206898] NET: Registered protocol family 16
[ 0.207056] ACPI: bus type pci registered
[ 0.207200] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.207205] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.207209] PCI: Using MMCONFIG for extended config space
[ 0.207212] PCI: Using configuration type 1 for base access
[ 0.207951] bio: create slab <bio-0> at 0
[ 0.211250] ACPI: EC: Look up EC in DSDT
[ 0.214102] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.217442] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.218088] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.218783] ACPI: Dynamic OEM Table Load:
[ 0.218788] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.219036] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.219702] ACPI: Dynamic OEM Table Load:
[ 0.219706] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.237115] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.237838] ACPI: Dynamic OEM Table Load:
[ 0.237843] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.246829] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.247515] ACPI: Dynamic OEM Table Load:
[ 0.247520] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.257074] ACPI: Interpreter enabled
[ 0.257081] ACPI: (supports S0 S3 S4 S5)
[ 0.257124] ACPI: Using IOAPIC for interrupt routing
[ 0.265711] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.265982] ACPI: No dock devices found.
[ 0.265985] HEST: Table not found.
[ 0.265991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.266509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.267544] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.267549] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.267553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.267560] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.267579] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.267613] DMAR: Forcing write-buffer flush capability
[ 0.267616] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.267647] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.267668] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.267681] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.267691] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
[ 0.267738] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.267756] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
[ 0.267863] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.267945] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
[ 0.268041] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.272125] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
[ 0.296690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.296698] pci 0000:00:1a.7: PME# disabled
[ 0.296734] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.296759] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
[ 0.296845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.296852] pci 0000:00:1b.0: PME# disabled
[ 0.296883] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.296968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.296974] pci 0000:00:1c.0: PME# disabled
[ 0.297011] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.297098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.297105] pci 0000:00:1c.3: PME# disabled
[ 0.297148] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.297230] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.297313] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.297391] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.297471] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.297552] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.297646] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.302125] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
[ 0.328820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.328828] pci 0000:00:1d.7: PME# disabled
[ 0.328858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.328949] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.329112] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.329145] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
[ 0.329159] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
[ 0.329172] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
[ 0.329185] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
[ 0.329199] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.329212] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
[ 0.329268] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.329274] pci 0000:00:1f.2: PME# disabled
[ 0.329302] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.329328] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
[ 0.329362] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.329486] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
[ 0.329519] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
[ 0.329537] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
[ 0.329645] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.329653] pci 0000:01:00.0: PME# disabled
[ 0.333336] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.333343] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.333349] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.333360] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.333454] pci 0000:02:00.0: [8086:0083] type 0 class 0x000280
[ 0.333498] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
[ 0.333662] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.333671] pci 0000:02:00.0: PME# disabled
[ 0.340004] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.340011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.340018] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.340028] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.340121] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.340128] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.340135] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.340145] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.340150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.340154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.340158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.340163] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.340186] pci_bus 0000:00: on NUMA node 0
[ 0.340192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.340631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.340734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.340832] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.340835] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.348405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.348693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.348788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.348886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.348981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.349075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.349214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.349232] vgaarb: loaded
[ 0.349386] PCI: Using ACPI for IRQ routing
[ 0.349389] PCI: pci_cache_line_size set to 64 bytes
[ 0.349500] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.349504] reserve RAM buffer: 000000007ba60000 - 000000007bffffff
[ 0.349510] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
[ 0.349514] reserve RAM buffer: 000000007bbe2000 - 000000007bffffff
[ 0.349518] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
[ 0.349695] NetLabel: Initializing
[ 0.349698] NetLabel: domain hash size = 128
[ 0.349700] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.349720] NetLabel: unlabeled traffic allowed by default
[ 0.349740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.349748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.349756] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.359999] Switching to clocksource hpet
[ 0.363178] Switched to NOHz mode on CPU #0
[ 0.363276] Switched to NOHz mode on CPU #1
[ 0.370116] pnp: PnP ACPI init
[ 0.370143] ACPI: bus type pnp registered
[ 0.370722] pnp 00:00: [bus 00-ff]
[ 0.370727] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.370731] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.370735] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.370739] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.370743] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.370747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.370751] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.370755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.370759] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.370763] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.370767] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.370770] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.370774] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.370778] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.370782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.370786] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.370790] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.370794] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.370798] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.370911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.371140] pnp 00:01: [io 0x002e-0x002f]
[ 0.371144] pnp 00:01: [io 0x004e-0x004f]
[ 0.371148] pnp 00:01: [io 0x164e-0x164f]
[ 0.371151] pnp 00:01: [io 0x0061]
[ 0.371154] pnp 00:01: [io 0x0070]
[ 0.371157] pnp 00:01: [io 0x0080]
[ 0.371160] pnp 00:01: [io 0x0092]
[ 0.371163] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.371167] pnp 00:01: [io 0x0063]
[ 0.371170] pnp 00:01: [io 0x0065]
[ 0.371173] pnp 00:01: [io 0x0067]
[ 0.371176] pnp 00:01: [io 0x0600-0x060f]
[ 0.371180] pnp 00:01: [io 0x0610]
[ 0.371183] pnp 00:01: [io 0x0800-0x080f]
[ 0.371186] pnp 00:01: [io 0x0810-0x0817]
[ 0.371190] pnp 00:01: [io 0x0820-0x0823]
[ 0.371193] pnp 00:01: [io 0x0400-0x047f]
[ 0.371196] pnp 00:01: [io 0x0500-0x053f]
[ 0.371200] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.371203] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.371211] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.371215] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.371218] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.371222] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.371225] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.371229] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.371232] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.371236] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.371273] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.371372] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.371377] system 00:01: [io 0x0610] has been reserved
[ 0.371381] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.371386] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.371390] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.371394] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.371399] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.371405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.371410] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.371414] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.371419] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.371424] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.371429] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.371434] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.371438] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.371443] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.371448] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.371453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371471] pnp 00:02: [io 0x0000-0x001f]
[ 0.371474] pnp 00:02: [io 0x0081-0x0091]
[ 0.371478] pnp 00:02: [io 0x0093-0x009f]
[ 0.371481] pnp 00:02: [io 0x00c0-0x00df]
[ 0.371485] pnp 00:02: [dma 4]
[ 0.371537] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371576] pnp 00:03: [io 0x0070-0x0077]
[ 0.371630] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.371735] pnp 00:04: [irq 0 disabled]
[ 0.371750] pnp 00:04: [irq 8]
[ 0.371753] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.371809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.371828] pnp 00:05: [io 0x00f0]
[ 0.371835] pnp 00:05: [irq 13]
[ 0.371889] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.371907] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.371965] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.371991] pnp 00:07: [io 0x0060]
[ 0.371995] pnp 00:07: [io 0x0064]
[ 0.372003] pnp 00:07: [irq 1]
[ 0.372061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.372090] pnp 00:08: [irq 12]
[ 0.372150] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
[ 0.372300] pnp: PnP ACPI: found 9 devices
[ 0.372303] ACPI: ACPI bus type pnp unregistered
[ 0.409749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.409755] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.409764] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.409772] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.409782] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.409787] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.409795] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.409802] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.409812] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.409815] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.409823] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.409829] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.409853] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.409861] pci 0000:00:1c.0: setting latency timer to 64
[ 0.409875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.409881] pci 0000:00:1c.3: setting latency timer to 64
[ 0.409891] pci 0000:00:1e.0: setting latency timer to 64
[ 0.409897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.409901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.409905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.409909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.409914] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.409918] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
[ 0.409922] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[ 0.409927] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.409931] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
[ 0.409935] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[ 0.409940] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.409943] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.409947] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.409952] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.410023] NET: Registered protocol family 2
[ 0.410132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.410465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.411087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.411362] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.411366] TCP reno registered
[ 0.411370] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.411381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.411559] NET: Registered protocol family 1
[ 0.411580] pci 0000:00:02.0: Boot video device
[ 0.440052] PCI: CLS 64 bytes, default 64
[ 0.440120] Unpacking initramfs...
[ 0.493687] Freeing initrd memory: 1728k freed
[ 0.494435] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.494439] Simple Boot Flag at 0x44 set to 0x1
[ 0.494754] apm: BIOS not found.
[ 0.494943] audit: initializing netlink socket (disabled)
[ 0.494958] type=2000 audit(1312551622.493:1): initialized
[ 0.495391] highmem bounce pool size: 64 pages
[ 0.495398] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.498715] VFS: Disk quotas dquot_6.5.2
[ 0.498846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.499018] msgmni has been set to 1714
[ 0.499314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.499357] io scheduler noop registered
[ 0.499361] io scheduler deadline registered
[ 0.499380] io scheduler cfq registered (default)
[ 0.499553] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.499624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.499729] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.499792] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[ 0.500070] intel_idle: MWAIT substates: 0x22220
[ 0.500074] intel_idle: does not run on family 6 model 23
[ 0.500082] ERST: Table is not found!
[ 0.500103] isapnp: Scanning for PnP cards...
[ 0.857044] isapnp: No Plug & Play device found
[ 0.857122] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.060716] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.068400] i8042: Detected active multiplexing controller, rev 1.1
[ 1.071789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.071804] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.071809] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.071813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.071818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.072099] mousedev: PS/2 mouse device common for all mice
[ 1.072185] rtc_cmos 00:03: RTC can wake from S4
[ 1.086817] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.086852] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.086887] cpuidle: using governor ladder
[ 1.086890] cpuidle: using governor menu
[ 1.087261] TCP cubic registered
[ 1.087265] NET: Registered protocol family 17
[ 1.087276] Registering the dns_resolver key type
[ 1.087307] Using IPI No-Shortcut mode
[ 1.087437] PM: Hibernation image not present or could not be loaded.
[ 1.087445] registered taskstats version 1
[ 1.087957] rtc_cmos 00:03: setting system clock to 2011-08-05 13:40:23 UTC (1312551623)
[ 1.088039] Initializing network drop monitor service
[ 1.088128] Freeing unused kernel memory: 512k freed
[ 1.088469] Write protecting the kernel text: 3380k
[ 1.088507] Write protecting the kernel read-only data: 1028k
[ 1.093885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.106227] udevd[54]: starting version 171
[ 1.236052] SCSI subsystem initialized
[ 1.269724] libata version 3.00 loaded.
[ 1.282619] ahci 0000:00:1f.2: version 3.0
[ 1.282637] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.282703] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.282767] ahci: SSS flag set, parallel bus scan disabled
[ 1.282814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.282820] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
[ 1.282828] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.301035] scsi0 : ahci
[ 1.301194] scsi1 : ahci
[ 1.301318] scsi2 : ahci
[ 1.301438] scsi3 : ahci
[ 1.301557] scsi4 : ahci
[ 1.301679] scsi5 : ahci
[ 1.301772] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 42
[ 1.301778] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 42
[ 1.301782] ata3: DUMMY
[ 1.301784] ata4: DUMMY
[ 1.301788] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 42
[ 1.301793] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 42
[ 1.496710] Refined TSC clocksource calibration: 1296.749 MHz.
[ 1.496717] Switching to clocksource tsc
[ 1.786699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.787736] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
[ 1.787741] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.788946] ata1.00: configured for UDMA/133
[ 1.789123] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[ 2.106690] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.426689] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.746690] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.760584] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.760671] sd 0:0:0:0: [sda] Write Protect is off
[ 2.760676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.760709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.798506] sda: sda1 sda2 sda3 sda4
[ 2.799028] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.310879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.653828] udevd[228]: starting version 173
[ 4.958869] ACPI: acpi_idle registered with cpuidle
[ 4.959125] Monitor-Mwait will be used to enter C-1 state
[ 4.959159] Monitor-Mwait will be used to enter C-2 state
[ 4.959167] Marking TSC unstable due to TSC halts in idle
[ 4.959208] Switching to clocksource hpet
[ 5.052561] fuse init (API version 7.16)
[ 5.094399] acerhdf: Acer Aspire One Fan driver, v.0.5.24
[ 5.094431] acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, please report, aborting!
[ 5.377790] Linux agpgart interface v0.103
[ 5.381930] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.382452] ACPI: AC Adapter [ACAD] (off-line)
[ 5.389644] wmi: Mapper loaded
[ 5.390172] iTCO_vendor_support: vendor-support=0
[ 5.532413] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.532424] ACPI: Power Button [PWRB]
[ 5.532507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 5.548014] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 5.550648] acer_wmi: Brightness must be controlled by generic video driver
[ 5.554953] ACPI: Lid Switch [LID0]
[ 5.555062] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.555072] ACPI: Sleep Button [SLPB]
[ 5.555166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.555173] ACPI: Power Button [PWRF]
[ 5.560994] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.569140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.569153] ACPI: Battery Slot [BAT1] (battery present)
[ 5.570951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 5.573564] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 5.573653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.602755] usbcore: registered new interface driver usbfs
[ 5.602793] usbcore: registered new interface driver hub
[ 5.606733] usbcore: registered new device driver usb
[ 5.623405] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.659329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.659373] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.659401] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.659407] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.659455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.670065] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.673944] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 5.673971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
[ 5.690924] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.691336] hub 1-0:1.0: USB hub found
[ 5.691345] hub 1-0:1.0: 2 ports detected
[ 5.691477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.691508] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.691514] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.691528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.702271] cfg80211: Calling CRDA to update world regulatory domain
[ 5.706752] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.710655] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.710683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
[ 5.723379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.723603] hub 2-0:1.0: USB hub found
[ 5.723610] hub 2-0:1.0: 6 ports detected
[ 5.724256] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 5.724463] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.725927] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 5.726502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 5.802604] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.802687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.802702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.802709] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.802732] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.813675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
[ 5.814571] hub 3-0:1.0: USB hub found
[ 5.814580] hub 3-0:1.0: 2 ports detected
[ 5.814712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.814725] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.814730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.814748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 5.823482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 5.824221] hub 4-0:1.0: USB hub found
[ 5.824230] hub 4-0:1.0: 2 ports detected
[ 5.824360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.824373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.824378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.824392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.836745] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 5.836988] hub 5-0:1.0: USB hub found
[ 5.836995] hub 5-0:1.0: 2 ports detected
[ 5.837118] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.837130] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.837135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.837148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.846757] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
[ 5.846997] hub 6-0:1.0: USB hub found
[ 5.847004] hub 6-0:1.0: 2 ports detected
[ 5.869833] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.909784] [drm] Initialized drm 1.1.0 20060810
[ 5.926221] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.926238] atl1c 0000:01:00.0: setting latency timer to 64
[ 6.014499] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 6.022590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.022599] i915 0000:00:02.0: setting latency timer to 64
[ 6.033370] usb 2-5: new high speed USB device number 2 using ehci_hcd
[ 6.045183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 6.045188] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 6.045269] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.045281] iwlagn 0000:02:00.0: setting latency timer to 64
[ 6.045314] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 6.066230] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
[ 6.066236] iwlagn 0000:02:00.0: Device SKU: 0X9
[ 6.066240] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 6.066261] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 6.066513] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
[ 6.071614] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.071623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.071626] [drm] Driver supports precise vblank timestamp query.
[ 6.167372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.236519] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
[ 6.236889] Registered led device: phy0-led
[ 6.309104] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.435863] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 6.480908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[ 6.507822] Linux media interface: v0.10
[ 6.580021] Linux video capture interface: v2.00
[ 6.591629] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
[ 6.608274] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 6.608368] usbcore: registered new interface driver uvcvideo
[ 6.608371] USB Video Class driver (v1.0.0)
[ 6.624890] fbcon: inteldrmfb (fb0) is primary device
[ 6.671041] Console: switching to colour frame buffer device 170x48
[ 6.678170] fb0: inteldrmfb frame buffer device
[ 6.678173] drm: registered panic notifier
[ 6.679734] acpi device:03: registered as cooling_device2
[ 6.679988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.680104] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 6.680793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.680937] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.680975] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.802470] hda_codec: ALC269: BIOS auto-probing.
[ 6.803832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 6.833736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.833855] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.406870] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.676079] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.886041] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
[ 12.277210] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 12.600410] /dev/vmmon[897]: Module vmmon: registered with major=10 minor=165
[ 12.600421] /dev/vmmon[897]: Module vmmon: initialized
[ 12.646908] /dev/vmci[905]: VMCI: Driver initialized.
[ 12.647204] /dev/vmci[905]: Module vmci: registered with major=10 minor=58
[ 12.647209] /dev/vmci[905]: Module vmci: initialized
[ 12.827251] ppdev: user-space parallel port driver
[ 13.786476] /dev/vmnet: open called by PID 979 (vmnet-dhcpd)
[ 13.786488] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 13.786521] /dev/vmnet: port on hub 1 successfully opened
[ 13.801438] /dev/vmnet: open called by PID 981 (vmnet-netifup)
[ 13.801452] /dev/vmnet: port on hub 1 successfully opened
[ 13.854670] /dev/vmnet: open called by PID 983 (vmnet-dhcpd)
[ 13.854683] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 13.854720] /dev/vmnet: port on hub 8 successfully opened
[ 13.915864] /dev/vmnet: open called by PID 987 (vmnet-natd)
[ 13.915881] /dev/vmnet: port on hub 8 successfully opened
[ 13.936302] /dev/vmnet: open called by PID 988 (vmnet-netifup)
[ 13.936317] /dev/vmnet: port on hub 8 successfully opened
[ 38.702663] NET: Registered protocol family 10
[ 38.704338] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.704788] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.752832] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 40.413933] EXT4-fs (sda4): re-mounted. Opts: commit=600
[ 48.976756] vmnet8: no IPv6 routers present
[ 49.523376] vmnet1: no IPv6 routers present
[ 105.125369] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
[ 105.127031] wlan0: authenticated
[ 105.137382] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
[ 105.140390] wlan0: RX AssocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
[ 105.140396] wlan0: associated
[ 105.144018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 105.447100] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 105.447115] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 105.447150] /dev/vmnet: port on hub 0 successfully opened
[ 105.447175] bridge-wlan0: device is wireless, enabling SMAC
[ 105.447181] bridge-wlan0: up
[ 105.448675] bridge-wlan0: attached
[ 107.324643] wlan0: deauthenticating from 00:15:e9:27:b5:38 by local choice (reason=3)
[ 107.400201] cfg80211: Calling CRDA to update world regulatory domain
[ 107.423712] bridge-wlan0: disabling the bridge
[ 107.440034] bridge-wlan0: down
[ 107.440043] bridge-wlan0: detached
[ 107.440111] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 107.440124] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 107.440157] /dev/vmnet: port on hub 0 successfully opened
[ 107.440172] bridge-wlan0: device is wireless, enabling SMAC
[ 107.440177] bridge-wlan0: up
[ 107.440182] bridge-wlan0: attached
[ 107.860411] bridge-wlan0: disabling the bridge
[ 107.869871] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
[ 107.872071] wlan0: authenticated
[ 107.872466] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
[ 107.875411] wlan0: RX ReassocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
[ 107.875417] wlan0: associated
[ 107.876696] bridge-wlan0: down
[ 107.876705] bridge-wlan0: detached
[ 107.904358] /dev/vmnet: open called by PID 971 (vmnet-bridge)
[ 107.904374] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 107.904409] /dev/vmnet: port on hub 0 successfully opened
[ 107.904423] bridge-wlan0: device is wireless, enabling SMAC
[ 107.904428] bridge-wlan0: up
[ 107.905917] bridge-wlan0: attached
[ 118.910106] wlan0: no IPv6 routers present
This is the output of /var/log/boot
Fri Aug 5 15:40:30 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Loading Modules ^[[71G [BUSY] ^[[71G [FAIL]
Fri Aug 5 15:40:30 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
Fri Aug 5 15:40:30 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190178/480496 files, 1530694/1921775 blocks
Fri Aug 5 15:40:30 2011: /dev/sda4: clean, 49123/14761984 files, 38814365/59034858 blocks
Fri Aug 5 15:40:30 2011: /dev/sda1: clean, 30/26104 files, 19115/104388 blocks
Fri Aug 5 15:40:30 2011: ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:30 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
Fri Aug 5 15:40:31 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:31 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: INIT: Entering runlevel: 5
Fri Aug 5 15:40:32 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:32 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:33 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: :: Restoring ALSA Levels ^[[161G [BUSY] ^[[161G [DONE]
Fri Aug 5 15:40:34 2011: Starting VMware services:
Fri Aug 5 15:40:34 2011: VMware USB Arbitrator^[[71G done
Fri Aug 5 15:40:34 2011: Virtual machine monitor^[[71G done
Fri Aug 5 15:40:35 2011: Virtual machine communication interface^[[71G done
Fri Aug 5 15:40:35 2011: VM communication interface socket family^[[71G done
Fri Aug 5 15:40:35 2011: Blocking file system^[[71G done
Fri Aug 5 15:40:35 2011: Virtual ethernet^[[71G done
Fri Aug 5 15:40:36 2011: Shared Memory Available^[[71G done
Fri Aug 5 15:40:36 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
What could be the problem?
Thanks

Wed Aug 10 08:49:11 2011: :: Adjusting system time and setting kernel timezone ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Starting UDev Daemon ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Triggering UDev uevents ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Loading Modules ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Waiting for UDev uevents to be processed ^[[119G [BUSY] ^[[119G [DONE]
Wed Aug 10 08:49:11 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190755/480496 files, 1567027/1921775 blocks
Wed Aug 10 08:49:11 2011: /dev/sda4: clean, 39914/14761984 files, 39001242/59034858 blocks
Wed Aug 10 08:49:11 2011: /dev/sda1: clean, 29/26104 files, 19024/104388 blocks
Wed Aug 10 08:49:11 2011: ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
Wed Aug 10 08:49:11 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:11 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:12 2011: INIT: Entering runlevel: 5
Wed Aug 10 08:49:12 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:13 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:13 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
Wed Aug 10 08:49:14 2011: :: Restoring ALSA Levels ^[[161G [BUSY] Found hardware: "HDA-Intel" "Intel Cantiga HDMI" "HDA:10ec0269,1025029b,00100004 HDA:80862802,80860101,001000
Wed Aug 10 08:49:14 2011: Hardware is initialized using a generic method
Wed Aug 10 08:49:14 2011: ^[[161G [FAIL]
Wed Aug 10 08:49:15 2011: Starting VMware services:
Wed Aug 10 08:49:15 2011: VMware USB Arbitrator^[[71G done
Wed Aug 10 08:49:15 2011: Virtual machine monitor^[[71Gfailed
Wed Aug 10 08:49:15 2011: Virtual machine communication interface^[[71Gfailed
Wed Aug 10 08:49:15 2011: VM communication interface socket family^[[71Gfailed
Wed Aug 10 08:49:15 2011: Blocking file system^[[71Gfailed
Wed Aug 10 08:49:15 2011: Virtual ethernet^[[71Gfailed
Wed Aug 10 08:49:15 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
Ok, I still have that fail during the 'Mounting Local Filesystems'.
If there isn't the swap partition it should be something else from my fstab..
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
UUID=1b52b0c4-5b56-4bee-8966-65bcaffbf2ee /home ext4 defaults 0 1
UUID=22475d68-29e5-4a22-8942-38cb30110d30 swap swap defaults 0 0
UUID=2bef0cce-027d-44fa-a086-056c390cd847 / ext4 defaults 0 1
UUID=59d811ed-2920-45c1-a5cc-e0675e212721 /boot ext2 defaults 0 1
UUID=325220A852207331 /media/MyPassport ntfs defaults,nofail 0 2
UUID=FDC0-6FEA /media/CowonIvana auto defaults,nofail 0 2
UUID=7AEB-F44F /media/CentralEurope auto defaults,nofail 0 2
UUID=287B-C290 /media/CowonGian auto defaults,nofail 0 2
UUID=3F9D788B3774630C /media/SanDisk ntfs defaults,nofail 0 2
But I can't find anything that looks unusual into my /etc/fstab

Query execution failed for data set

Hi,
We are using SQL 2005 server for generating reports.When we ran the reports it taking so much time after some time it shows this error:---
ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set ---> System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
Can you help me out.
Thanks,
--Amit

My team is also facing similar problem. The RS trace logs report:
w3wp!processing!13!9/26/2007-15:31:23:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'msdb'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'msdb'. ---> System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
Operation cancelled by user.
In our system, Report Server and Database are on different machines. Report Server access database using a service account who has stored proc execute permissions on database.
Problem comes only if the query execution time exceeds 5 mins. Otherwise the report gets generated successfully.
I suspected this to be some timeout issue. But I have checked that all timeout settings in rs config files are as default.
Any pointers?
Thanks
puns
[email protected]

MDT 2012 - Image failing during system restore - C:\LTIBootstrap still there. Autologin not happening.

Hello,
I'm hoping someone can assist. I have an image that was working but the builtin admin account was disabled. I went into the image and enabled the account and set a password. I ran sysprep and capture. Now, when i try to deploy either
image, it installs the OS, reboots and then sits at a login (does not go into the admin account to continue). I login and i notice that LTIBootstrap.vbs is sitting on the root of c along with the Minint folder and other MDT folders. I have MDT
on 2 servers and they both do the same thing. Unattend.xml in c:\minint has the correct local admin/password
Customsettings.ini:
[Settings]
Priority=Default
Properties=MyCustomProperties
[Default]
DeployRoot=\\ourserver\D$\DeploymentShare$
ComputerBackupLocation=Network
Home_Page=http://home
OSInstall=Y
SkipAdminPassword=YES
SkipApplications=YES
SkipAppsOnUpgrade=YES
SkipBDDWelcome=YES
SkipBitLocker=YES
SkipComputerName=YES
OSDComputerName=HDQ-%SerialNumber%
SkipComputerBackup=YES
SkipDeploymentType=YES
SkipDomainMembership=YES
JoinDomain=OurDomain
DomainAdmin=xxxx(Account with Join domain rights)
DomainAdminDomain= Our Domain
DomainAdminPassword=Password for account
SkipAdminAccounts=YES
SkipFinalSummary=NO
FinishAction=Reboot
SkipLocaleSelection=YES
KeyboardLocale=en-US
UserLocale=en-US
UILanguage=en-US
SkipPackageDisplay=YES
SkipProductKey=YES
SkipSummary=No
SkipTaskSequence=NO
SkipTimeZone=YES
TimeZoneName=Eastern Standard Time
SkipUserData=YES
EventService=http://OurServer:9800
[Settings]
Priority=Default
[Default]
DeployRoot=\\OurServer\D$\DeploymentShare$
UserID=account to join to domain
USerDomain=Our Domain
UserPassword=Account password to join domain
Any help would be greatly appreciated.
Thanks
Rick
BDD.LOG
<![LOG[ZTINextPhase COMPLETED. Return Value = 0]LOG]!><time="14:10:58.000+000" date="01-13-2014" component="ZTINextPhase" context="" type="1" thread="" file="ZTINextPhase">
<![LOG[ZTINextPhase processing completed successfully.]LOG]!><time="14:10:58.000+000" date="01-13-2014" component="ZTINextPhase" context="" type="1" thread="" file="ZTINextPhase">
<![LOG[Event 41001 sent: ZTINextPhase processing completed successfully.]LOG]!><time="14:10:58.000+000" date="01-13-2014" component="ZTINextPhase" context="" type="1" thread="" file="ZTINextPhase">
<![LOG[Command completed, return code = -2147021886]LOG]!><time="14:10:58.000+000" date="01-13-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property LTIDirty is now = FALSE]LOG]!><time="14:10:58.000+000" date="01-13-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[If there is a drive letter defined, make sure we clear it now so we can *force* recalcutation.]LOG]!><time="14:10:59.000+000" date="01-13-2014" component="LiteTouch" context="" type="1" thread=""
file="LiteTouch">
<![LOG[Property OSDTargetDriveCache is now = DIRTY]LOG]!><time="14:10:59.000+000" date="01-13-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[LTI initiating task sequence-requested reboot.]LOG]!><time="14:10:59.000+000" date="01-13-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Event 41017 sent: LTI initiating task sequence-requested reboot.]LOG]!><time="14:10:59.000+000" date="01-13-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

Hi Rick,
To my understanding, sysprep and to be more specific the "gerenalize" step will make sure all personalized information will be removed before entering the capture mode.
I'm aware additional created account's will be preserved, but I can't tell you about the built-in administrator account.
The first thing that comes to mind is that, your Build task sequence uses a Unattend.xml, just the same as your Deploy task sequence does this.
Assuming that you don't do anything you haven't mentioned with the account in the task sequence, like renaming the admin account or setting a different password during the task sequence. Cross checking both your Unattended.xml would be a good place to start.
Also, it is known, that Windows allows the machine to be auto logged on, a couple of times. So please check if this isn't also the case. See this link for more info: http://support.microsoft.com/kb/324737
Lastly if all else fails, you can set the account enabled, and a password by commandline, but this should only be done as a temporarily work around. See these links for more information: http://support.microsoft.com/kb/251394 and http://social.technet.microsoft.com/wiki/contents/articles/3040.enable-disable-the-local-hidden-built-in-administrator-account-in-windows-7.aspx
Good luck!
If this post is helpful please click "Mark for answer", thanks! Kind regards

EAP-TLS or PEAP authentication failed during SSL handshake

Hi Pros,
I am a newbie in the ACS 4.2 and EAP-TLS implementation, with that being said. I face an issue during a EAP-TLS implementation. My search shows that this kind of error message is already certificate issue;However, I have deleted and recreated the certificate in both ACS and the client with the same result. I have deleted and re-install the certchain as well.
When I check my log in the failed attemps, there is what I found:
Date
Time
Message-Type
User-Name
Group-Name
Caller-ID
Network Access Profile Name
Authen-Failure-Code
Author-Failure-Code
Author-Data
NAS-Port
NAS-IP-Address
Filter Information
PEAP/EAP-FAST-Clear-Name
EAP Type
EAP Type Name
Reason
Access Device
Network Device Group
06/23/2010
17:39:51
Authen failed
000e.9b6e.e834
Default Group
000e.9b6e.e834
(Default)
EAP-TLS or PEAP authentication failed during SSL handshake
1101
10.111.22.24
25
MS-PEAP
wbr-1121-zozo-test
Office Networ
06/23/2010
17:39:50
Authen failed
[email protected]
Default Group
000e.9b6e.e834
(Default)
EAP-TLS or PEAP authentication failed during SSL handshake
1098
10.111.22.24
25
MS-PEAP
wbr-1121-zozo-test
Office Network
[email protected] = my windows active directory name
1. Why under EAP-TYPE it shows MS-PEAP not EAP-TLS? I did configure EAP-TLS....
2. Why sometimes it just shows the MAC of the client for username?
3. Why it puts me in DEFAULT-GROUP even though i belongs to a group well definy in the acs?
2. Secondly, When I check in pass authentications... there is what i saw
Date
Time
Message-Type
User-Name
Group-Name
Caller-ID
NAS-Port
NAS-IP-Address
Network Access Profile Name
Shared RAC
Downloadable ACL
System-Posture-Token
Application-Posture-Token
Reason
EAP Type
EAP Type Name
PEAP/EAP-FAST-Clear-Name
Access Device
Network Device Group
06/23/2010
17:30:49
Authen OK
groszozo
NOC Tier 2
10.11.10.105
1
10.111.22.24
(Default)
wbr-1121-zozo-test
Office Network
06/23/2010
17:29:27
Authen OK
groszozo
NOC Tier 2
10.11.10.105
1
10.111.22.24
(Default)
wbr-1121-zozo-test
Office Network
In the output below, it says that the user is authenticate and it puts the user in the right group with the right username, but the user never really authenticate. Maybe for the first few seconds when I initiate the connection.
Before I forget, the suppliant is using WIN XP and 802.1x is enable. I even uncheck not verify the server and the ACS under External User Databases, I did check ENABLE EAP-TLS machine authentication.
Thanks in advance for your help,
Crazy---

Any ideas on this guys?? In my end, i've been reading some docs... Things started to make sens to me, but I still cannot authenticate, still the same errors. One more thing that catch my attention now is the time it takes to open a telnet session to cisco device which has the ACS for auth server.
My AD(Active Direct) and the ACS server are local same subnet(server subnet). Ping to the ACS from my desktop which is in different subnet is only take 1ms. To confirm that the issue is the ACS server, I decided to use another server in remote location, the telnet connection is way faster than the local ACS.
Let's brain storm together to figure out this guys.
Thanks in advance,
----Paul

EAP-TLS PEAP FAIL DURING SSH HANDSHAKE

Hi Pros,
I am a newbie in the ACS 4.2 and EAP-TLS implementation, with that being said. I face an issue during a EAP-TLS implementation. My search shows that this kind of error message is already certificate issue;However, I have deleted and recreated the certificate in both ACS and the client with the same result. I have deleted and re-install the certchain as well.
When I check my log in the failed attemps, there is what I found:
Date
Time
Message-Type
User-Name
Group-Name
Caller-ID
Network Access Profile Name
Authen-Failure-Code
Author-Failure-Code
Author-Data
NAS-Port
NAS-IP-Address
Filter Information
PEAP/EAP-FAST-Clear-Name
EAP Type
EAP Type Name
Reason
Access Device
Network Device Group
06/23/2010
17:39:51
Authen failed
000e.9b6e.e834
Default Group
000e.9b6e.e834
(Default)
EAP-TLS or PEAP authentication failed during SSL handshake
1101
10.111.22.24
25
MS-PEAP
wbr-1121-zozo-test
Office Networ
06/23/2010
17:39:50
Authen failed
[email protected]
Default Group
000e.9b6e.e834
(Default)
EAP-TLS or PEAP authentication failed during SSL handshake
1098
10.111.22.24
25
MS-PEAP
wbr-1121-zozo-test
Office Network
[email protected]
= my windows active directory name
1. Why under EAP-TYPE it shows MS-PEAP not EAP-TLS? I did configure EAP-TLS....
2. Why sometimes it just shows the MAC of the client for username?
3. Why it puts me in DEFAULT-GROUP even though i belongs to a group well definy in the acs?
2. Secondly, When I check in pass authentications... there is what i saw
Date
Time
Message-Type
User-Name
Group-Name
Caller-ID
NAS-Port
NAS-IP-Address
Network Access Profile Name
Shared RAC
Downloadable ACL
System-Posture-Token
Application-Posture-Token
Reason
EAP Type
EAP Type Name
PEAP/EAP-FAST-Clear-Name
Access Device
Network Device Group
06/23/2010
17:30:49
Authen OK
groszozo
NOC Tier 2
10.11.10.105
1
10.111.22.24
(Default)
wbr-1121-zozo-test
Office Network
06/23/2010
17:29:27
Authen OK
groszozo
NOC Tier 2
10.11.10.105
1
10.111.22.24
(Default)
wbr-1121-zozo-test
Office Network
In the output below, it says that the user is authenticate and it puts the user in the right group with the right username, but the user never really authenticate. Maybe for the first few seconds when I initiate the connection.
Before I forget, the suppliant is using WIN XP and 802.1x is enable. I even uncheck not verify the server and the ACS under External User Databases, I did check ENABLE EAP-TLS machine authentication.
Thanks in advance for your help,
Crazy---

I had this message recently. The first issue I found was that the username entered into the laptop was not correct (I had djohnson, need to have DJohnson)
The second issue I had was that my AP's were not authenticating to my WDS access point. I had turned off LEAP on my ACS server by accident causing the WDS authentication to fail. Once I turned this back on, my AP's authenticated to my WDS device and my users authenticated to the AP's.
Otherwise, the meaning of this is that the certs are not matching up correctly with the server either due to expiered certs, incorrect cert type on the users machine or incorrect information in the cert.
Hope this helps.

Proxy Activity terminated because errors occurred during package checks

Hi,
When i am activating the client proxy class in ECC system after assigning it to the package,i am getting the below error.With local object($TMP) its working fine. I tried creating package using se80 as well as from sm30 using view V_TDEVC also and the package is created with no restrictions also .Kindly suggest what needs to be done to fix the issue.
Activity terminated because errors occurred during package checks
Message no. EU839
Diagnosis
Dictionary objects can only be activated if the package check is swithch ed on - provided they do not contain any package check errors.
You will receive a list of the package check errors if you execute the package check within the appropriate dictionary tool. To do this, use the respective menu entry in the first menu of theen; corresponding dictionary tool.
Procedure
Keep note of the setting for the package check (system-wide property) in your SAP System; this setting defines in which form the package concept is to be applied.
In particular, check whether the package in which the incorrect dictionary object is located has sufficient usage applications. Then, if necessary, create the missing usage applications.
As soon as the package check errors have been removed, you must again activate the dictionary object.
Thnx,
Goutham

Hi Bhuvan,
Check Rashmi's response in this thread:
Re: Error in package dictionary objects (Proxy activation)
Regards,
Ravi Kanth Talagana

Database Configuration Assistant Failed During 9i Installation

Database Configuration Assistant failed during my 9i Installation due to lack of disk space. I had 4MG allocated on /apps and the application used 3.1GB. I now do not have the required 1GB for the seed database. Actually, I want to create the seed database on /oradata, not on /apps. Does anyone know how I can create that seed database in /oradata? I don't believe I was prompted for where to create that seed database. Also, how can I run the Database Configuration Assistant again? Typing the command dbca told me to set the DISPLAY environment variable and re-run.
Thanks in advance for any help you can give.
Veronica

I had java.lang.NoClassDefFoundError too.
This was fixed by having DISPLAY setting
#export DISPLAY=host:0.0
Make sure your x window system is working Ok.
I also used unset LANG

Configuration Assistant FAILED during Oracle 10.2.0.1.0 g installation

The Configuration Assistant Failed during set up. Can someone tell me how to resolve this problem. My reading reveals that I can use the database, however, it may not function properly? What should I do?

OS?
Text of error message?

Activation of BEx History failed during SPRO setting

Similar Messages

Maybe you are looking for